Motorola SURF Board Gateway SBG6580
Oct 2, 2012
Since the new cable company won't let me use my SB6141, I need to pick up a new cable modem. One that works with Oceanic TWC is the new SBG6580. It has wireless built-in; however, I don't want to use it. Is it possible to use this modem and leave the wireless off? Or does the wireless automatically turn-on whenever the modem is on? With all that said, is the built-in wireless any good? I recently purchased an ASUS RT-56 and would prefer using it to some built-in system.
View 11 Replies
ADVERTISEMENT
Mar 16, 2011
I switched to comcast internet recently and got a new modem. The modem is the telephony Arris one, but the problem is that I already have a Motorola SBG6580 but can not use that for my wireless laptop options. I want to be able to use the SBG6580 as my access point and LAN, but it isn't allowed any internet to share wirelessly?
View 3 Replies
View Related
May 4, 2012
I cant seem to to connect to my nintendo i have a motorala surfboard SBG6580
View 1 Replies
View Related
Mar 12, 2012
Motorola SBG6580, How do I change the SSID?
View 1 Replies
View Related
Dec 9, 2011
Can the SBG6580 be connected to the Vonage router and function?
View 1 Replies
View Related
Apr 26, 2012
I have time warner internet service and just upgraded my service to their extreme internet. In doing so I had to change my modem to a docis 3.0 modem; the motorola sbg6580. Its a modem that has a router and wifi built in but its really bad and not nearly as good as my net-gear router.
View 6 Replies
View Related
Oct 12, 2012
I have a 2nd computer wired up to my modem, but the LAN keeps randomly dropping every 2-5 hours It never drops for my main computer.I tried swapping cords and ports, but it still disconnects, while my main computer remains connected The internet worked fine when connected to another modem in another house.Do you think this is a problem with the modem or Windows7?I hard-reset the modem to factory settings, but it still happens.the modem is a Motorola Surfboard SBG6580
View 1 Replies
View Related
Jan 7, 2012
Looking to add my belkin wireless router to Sbg6580 router as an access point to extend wireless. I've read up enough to understand the fundamentals - LAN to LAN, changing IPs, turn off DCHP etc. - but am confused by a couple of things.
First, belkin faqs says to Open the router page, click on "use as access point" (I get that) "Select Enable" (I also get that), and then it goes on to say "This will give you the options to set the IP Address and Subnet mask for the router.**These settings should match your existing network settings; by default the IP address will be set to 192.168.2.254 and the Subnet mask will be 255.255.255.0". Does this mean to set the IP address of the Belkin to that of the Motorola (which is 192.168.0.1) on this page?
Then the FAQ goes on to say access the LAN and "change the IP Address to something such as 192.168.2.47 or you can use 192.168.2.200.**As long as the first three sets of numbers match your existing network, you will be fine". I thought the LAN IP address should fall outside the DCHP range of the Motorola? So if the DHCP range for the Motorola is 192.168.0.2 through 192.168.0.250 then I'd assign 192.168.0.251 to the Belkin?
View 5 Replies
View Related
Jun 30, 2012
I am missing my Installation CD, where I can download the software to configure my network (rename, etc.)?
View 3 Replies
View Related
Jul 30, 2012
How do you port forward Minecraft on a Motorola SBG6580 because I tried it and it didn't work I really want to have my own minecraft server,Dont say to go to portforward.com because I tried it and it didn't work it says the port is still closed when I check it on yougetsignal.com
View 5 Replies
View Related
Mar 4, 2013
Acer aspire 7741Z-4633 with windows 7 connects wireless to sbg6580 gateway that was just installed, but no internet access. able to connect other devices.
View 1 Replies
View Related
Sep 4, 2011
I use Motorola SBG 900 Wireless Surfboard Gateway with Timewarner service provider. I have couple of problems....
Problem 1 : I use VOIP phone (Vonage) which connected to my Motorola wireless device, current when i call somebody using VOIP phone, they can hear my voice but i cant hear them... Last years i dont have any problem but last one month above problem exists.
Problem 2: I tried Speed test with cable (13MBPS download stream) but through wireless (6MBPS download stream)
View 2 Replies
View Related
Jan 6, 2013
I am trying to setup a Linksys E2500 router with a Motorola RG2200C Residential Gateway. The Motorola box provides TV and DSL output. Currently a Linksys BEFSR81 router is connected and works fine. With the E2500, running Cisco Connect it gets to 90% complete and then times out. I'm guessing at that point it is trying to connect to the Internet.Support had me download the latest Cisco Connect, but it had the same problem. I have tried various things manually configuring the router with no success.
View 9 Replies
View Related
Sep 8, 2012
I've got on-board LAN but I don't know how to use it. Am I meant to be able to surf the internet just like that if i have got on-board LAN???
View 3 Replies
View Related
Feb 28, 2013
i m working on a project called networked control of inverted pendulum, how to establish a network with sensor node, actuator node and controller node, in a microcontroller board ?? which board one can use for a beginner on networking!
View 2 Replies
View Related
Mar 3, 2013
I have a toshiba satellite laptop (windows 7) with wireless on-board and an ethernet cable port. Up until last night, both worked flawlessly since I bought the computer a few years ago.
Now, the wireless still works in three different locations I have tried (i.e. three different networks), but the ethernet cable will not work. I thought it was the ethernet connection on the mobo at first, but then after acquiring a USB-NIC connection, I found I had the exact same problem... I can't connect to my router or even direct to the DSL modem using a ethernet cable. I know my system is good since all my other computers (7) work with wired connections, and my laptop doesn't work on other cables on which other computers do. Essentially, it appears that my computer has lost the ability to get an i.p. address using an ethernet cable of any kind. Both the onboard card and the usb-nic cable tell me they are 'working correctly' in the systems/devices/network adapters section. I have tried disabling one while trying the other. I have tried disabling the wireless while trying either, and still nothing.
View 1 Replies
View Related
Feb 27, 2013
i am working on a project called Networked control of inverted pendulum.i have done my simulations in matlab as a hardware perspective.i have to establish a network in a micro-controller board connect sensor actuator controller nodes from the board to the network.
View 1 Replies
View Related
Mar 10, 2011
My pc has a on board ethernet adaptor that stopped working all of sudden... I have no idea about what to do... I tried to check if there were any problem with a driver or something but the nic isn't even detected by the pc..
View 1 Replies
View Related
Jan 7, 2013
I'm currently in the market for a new router that supports remote IPSec VPN access to my home network. The router must support wireless (latest "n" standard is a plus) and must have gigabit links for LAN at least. I have been considering the following two routers but neither has an IPSec VPN server built in to the router OS:
ASUS RT-N66U
MikroTik RB2011UAS-2HnD-IN
As far as I can tell they both have PPTP server functionality and only IPSec pass-through. I would like a router that has the server ability built in to the OS so I won't have to run an additional system behind my network edge. I can also look into any small to medium size business routers, just as long as it supports a majority of the same features of the two routers I have listed for comparison.
View 19 Replies
View Related
Jan 20, 2004
What are the correct driver to use for the Optilplex GX200 On-board Ethernet port.
My configuration gives me an error message saying I need drivers for my PCI Ethernet Controller, however, it has not identified the manufacturer or the driver.
View 2 Replies
View Related
Aug 18, 2011
Is it possible for me to plug in and turn on on-board redundant power supply for a 4402 WLC that is already online and in production without any disruption to Wireless users and APs attached to that same controller?
View 1 Replies
View Related
Dec 5, 2011
I know the Nexus 5548P hardware does not support Netflow.I just need to know that if we introduce the layer 3 Daughter Board N55-D160L3 does this add Netflow support?
View 3 Replies
View Related
Feb 23, 2012
should a wusb54gsc see signal from a sbg6580
View 3 Replies
View Related
Jan 3, 2013
Model SBG6580 dropped offline last night. I called Charter my ISP. The Modem IP address has changed. I get no internet connectivity. Computer appears to connect to the network but ID' s it as an unidentified network. I have tried to connect both WIFI and wired.[CODE]
View 1 Replies
View Related
Mar 23, 2012
I recently got the sbg6580 an want it to work in bridged mode with my linksys wrt54g router. The problem is everything that is connected wirelessly like my Xbox or iPhone are connected to the Internet but my desktop pc which is a wired connection won't connect to the Internet.When I directly connect the modem to my desktop it works fine.
View 1 Replies
View Related
Apr 10, 2012
where do i get the security key
View 1 Replies
View Related
Aug 15, 2011
i just recently upgraded to Road Runner Extreme which Uses DOCSIS 3.0 SBG6580 Modem and i was wondering what internal settings i should use to maximize my speeds and online gameplay. I'm running a Ethernet line into my Xbox360 and wireless for my laptop. Also, i was told that Road Runner Extreme would get me 35Mbps downstream and 5Mbps Upstream, yet these are the speed test's i'm getting [URL]
View 1 Replies
View Related
Sep 11, 2012
I have a broadband Motorola SBG6580 cablemodem that feeds internet into my main home computer via a cable. The modem is also a wireless router.The modem is in an "office-room" inside my house. The main bedroom is located about 25 meters, with two bedrooms in between the office-room and the main bedroom.I broke a leg so I figured I could work on bed, but I have this problem: the signal from the motorola wireless router is so low at the main bedroom that the connection drops all the time. Oddly (or maybe not), I can see like 10 other access points, presumably from my neighbors, all with a full signal. And I live in a "full-floor" apartment so I only have neighbors above and below.I connected a linksys WRT54G2 that I have and I get the exact same problem.
View 5 Replies
View Related
Jun 28, 2012
I have a Motorola SBG6580 wireless gateway/router and am happy with it in general. I had a 192.168.2.n subnet with old Linksys but I find that I cannot change the MOT from its pre-set 192.168.0.n net to the ..2.net because it conflicts with a "private LAN" in the same range. How do I change the provate lan to, for example, ..9.n so I can use the ...2.n net? I'm running with the ..0.n now, just fine, but, I VPN into office and primary net there is ..0.n and so is confusing with IP shortcuts/conflicts. how to make the change?
View 1 Replies
View Related
Feb 4, 2011
I just got an E4200 and have a SBG6580 cable modem. I cant seem to set this up properly and my connection keeps dropping. What is the proper set up ? I would like to configure it so the cable modem handles the DNS and the E4200 handles the wireless.
View 4 Replies
View Related
Apr 12, 2011
I have instaled free vpn software from logmein hamishe but do not know how to surf internet.
View 1 Replies
View Related
Dec 2, 2012
I woke up this morning to find that I cannot surf the web anymore. I was able to last night just fine. My set up is this: Verizon Fios router(192.168.1.1)> Netgear gigabit switch> SMC router smcwbr14s-n3 (192.168.1.201) the Fios router is has a build in wireless but is in another building and i am not within range of it. I have a cat 5 cable that run between 2 house's... the cable comes into my house and into my switch then to my SMC router (smcwbr14s-n3 ) that is running in bridged mode to function as an AP. I can connect to a lan port on the switch or router and connect to the web (im currently in a lan port now.) Here's the thing, I can still connect to the wireless, it's just so slow (1Mbs -6Mbs)that i am unable to get anywhere... I do have security setup (WPA2) an im going to kill that to see if it resolves the issue... but it has been working fine with the current security setting for the last 5 months, so i dont really thing that is the issue.
View 3 Replies
View Related
Jan 26, 2012
my TWC connection and I can surf the net everywhere but when he takes it to his home and connects through his DSL he can pull up Google and can even search through Google but he cannot go to yahoo.com or Aol.com. Malwarebytes comes up with no infected files. I did a restore and the same problem. I did a recover! And same problem. I pulled up a Cmd window and run an ipconfig. I am used to seeing a 192.168.x.x address but on his I get a 10,x,x,x number.
View 5 Replies
View Related
