No Internet Access After Connecting To Sbg6580 Gateway?
Mar 4, 2013Acer aspire 7741Z-4633 with windows 7 connects wireless to sbg6580 gateway that was just installed, but no internet access. able to connect other devices.
View 1 Replies
ADVERTISEMENT
Motorola SBG6580 / Using A Gateway As A Access Point / Router
Mar 16, 2011I switched to comcast internet recently and got a new modem. The modem is the telephony Arris one, but the problem is that I already have a Motorola SBG6580 but can not use that for my wireless laptop options. I want to be able to use the SBG6580 as my access point and LAN, but it isn't allowed any internet to share wirelessly?
View 3 Replies View RelatedMotorola SBG6580 Gateway Acting As Router / Wireless Access Point?
May 4, 2012I cant seem to to connect to my nintendo i have a motorala surfboard SBG6580
View 1 Replies View RelatedMotorola SURF Board Gateway SBG6580
Oct 2, 2012Since the new cable company won't let me use my SB6141, I need to pick up a new cable modem. One that works with Oceanic TWC is the new SBG6580. It has wireless built-in; however, I don't want to use it. Is it possible to use this modem and leave the wireless off? Or does the wireless automatically turn-on whenever the modem is on? With all that said, is the built-in wireless any good? I recently purchased an ASUS RT-56 and would prefer using it to some built-in system.
View 11 Replies View RelatedConnecting Desktop Pc With Bridged Sbg6580?
Mar 23, 2012I recently got the sbg6580 an want it to work in bridged mode with my linksys wrt54g router. The problem is everything that is connected wirelessly like my Xbox or iPhone are connected to the Internet but my desktop pc which is a wired connection won't connect to the Internet.When I directly connect the modem to my desktop it works fine.
View 1 Replies View RelatedInternet Gateway Connection Stuck On Connecting?
Oct 3, 2012I can browse web pages and such, but i can't watch any videos or download bigger files. The videos usually play for about 4 seconds and files download about 3 MB before it just loads forever. I go to control panel and look at the network connections, and while the LAN is connected, the internet gateway just says "connecting".
View 1 Replies View RelatedLinksys Wired Router :: RV082 Gateway To Gateway VPN Not Connecting?
Jan 24, 2012I recently swapped out an RV082 with a newer model (still RV082 but black and a different interface). I configured the Gateway to Gateway VPN exactly as it was before but none of the three other RV082's will connect. I have tried deleting the connections several times to no avail. I have aggressive mode disabled and have tried with the firewall on and off. Below are the settings (IP's have been X'd out) and the log.
Settings:
IP OnlyIP Address : X0X.X0X.20.31Local Security Group Type : IPSubnetIP RangeIP Address : Subnet Mask : Remote Group Setup
Remote Security Gateway Type : IP OnlyIP AddressIP by DNS Resolved : Remote Security Group Type : IPSubnetIP RangeIP Address : Subnet Mask : AES-192AES-256AES-128 AES-192AES-256 AES-128 IPSec Setup3DES Keying Mode : ManualIKE with Preshared keyPhase 1 DH Group : Group 1 - 768 bitGroup 2 - 1024 bitGroup 5 - 1536 bitPhase 1 Encryption : DES Phase 1 Authentication : MD5SHA1Phase 1 SA Life Time : secondsPerfect Forward Secrecy : Phase 2 DH Group : Group 1 - 768 bitGroup 2 - 1024 bitGroup 5 - 1536 bitPhase 2 Encryption : NULLDES3DES Phase 2 Authentication : NULLMD5SHA1Phase 2 SA Life Time : secondsPreshared Key : Minimum Preshared Key Complexity : EnableLOG:
[code].....
Access Gateway Local Internet Workaround?
Mar 17, 2013If there was a workaround for me to connect to the internet outside of my citrix session? I work remotely for my company through citrix access gateway and can open/access the internet from within the session but any attempt from a browser/program outside of the session times out...I am thinking this is blocked on purpose for productivity reasons, however I want to be able to access the internet from outside of the session so that accessing personal sites for example, gmail, won't be tracked by my company.Would it be possible to run a virtual machine and change IP addresses so access within the machine runs independently of my session?
View 1 Replies View RelatedNo Internet Access Across PPTP / No Default Gateway
Jun 6, 2012I am trying to set up a PPTP VPN connection which also provides internet access. I have the following configuration. The router named "Router1" connects 2 computers PC1 and PC2 on the LAN side with a network address of 192.168.1.0/24. It is a PPTP server and a DHCP server. It gives IP addresses to PC1 and PC2. It has a static address of 192.169.1.2 on the LAN side and a static address of 10.2.9.1 on the WAN Side. PC3 has a static address of 10.2.9.2 and is connected to the WAN port of Router1. "Router2" is connected to the LAN side of Router1 and it has a static IP of 192.168.1.1. Router2 is connected to the internet and provides internet connection to PC1 and PC2. PC1 and PC2 connects fine to the internet and can see each other. However, PC3 cannot connect to the internet even though it is connected to Router1 by PPTP VPN connection. PC3 can see PC1, PC2, Router1 and Router2 but it cannot connect to the internet because Router1 does not give it the default gateway(192.168.1.1) to connect it. When PC3 connects via PPTP, It receives a correct IP address(10.2.9.3), correct DNS addresses but the ip4 default gateway field is left blank, and the DHCP option is not enabled on connection properties of PC3. Router1 is a DD-WRT firmware router (DLink Dir 400) and has PPTP server enabled as a service. How do I get Router 1 to give PC3 a default gateway IP? And how do I forward all outgoing packets from Router 1 to Router 2? I do not need port forwarding for some ports, I need full access to the internet from PC3 though the PPTP connection via Router2.
View 3 Replies View RelatedNo Internet Access And Default Gateway Is Missing
Jun 18, 2011I have a pocket wifi which allows you to connect up to five devices. my mum, sister and my phone can access it no problems but my laptop wont work.what will happen is:
- it connects automatically to the wifi
- but it has a little error mark on it
- and it says theres no internet access.
ive tried everything, ive ran several windows network diagnostics and it says the problem is the default gateway being unavailable.
Home Network :: No Internet Access Across PPTP / Default Gateway?
Jun 6, 2012I am trying to set up a PPTP VPN connection which also provides internet access. I have the following configuration. The router named "Router1" connects 2 computers PC1 and PC2 on the LAN side with a network address of 192.168.1.0/24. It is a PPTP server and a DHCP server. It gives IP addresses to PC1 and PC2. It has a static address of 192.169.1.2 on the LAN side and a static address of 10.2.9.1 on the WAN Side. PC3 has a static address of 10.2.9.2 and is connected to the WAN port of Router1. "Router2" is connected to the LAN side of Router1 and it has a static IP of 192.168.1.1. Router2 is connected to the internet and provides internet connection to PC1 and PC2. PC1 and PC2 connects fine to the internet and can see each other. However, PC3 cannot connect to the internet even though it is connected to Router1 by PPTP VPN connection. PC3 can see PC1, PC2, Router1 and Router2 but it cannot connect to the internet because Router1 does not give it the default gateway(192.168.1.1) to connect it.
When PC3 connects via PPTP, It receives a correct IP address(10.2.9.3), correct DNS addresses but the ip4 default gateway field is left blank, and the DHCP option is not enabled on connection properties of PC3. Router1 is a DD-WRT firmware router (DLink Dir 400) and has PPTP server enabled as a service. How do I get Router 1 to give PC3 a default gateway IP? And how do I forward all outgoing packets from Router 1 to Router 2? I do not need portforwarding for some ports, I need full access to the internet from PC3 though the PPTP connection via Router2
Laptop Receives IP Address / Subnet Mask And Gateway - No Internet Access
Sep 28, 2011Have a problem with a laptop connecting to a Wireless Router. The laptop was working fine on the last router which was on an ADSL Network.. (not that that matters),When the new router (Virgin Media / Cable) was installed all other laptops where connecting to it without any probs, but not this one.The laptop in question still receives an IP address, Subnet mask and Gateway from the router - Vista says Local only, no internet access. It cannot ping anything else on the network either. When I do ping it comes back destination host unreachable.
View 6 Replies View RelatedLinksys Wired Router :: RV042 - Can't Access Internet Or Ping Gateway
Jan 4, 2011I am using the default configuration at this point. I just connected 1 computer using the default IP with DHCP on the RV042 router. 192.168.1.0/255.255.255.0.I connect my wildblue satalite modem using a static IP address 75.106.203.xxx / 255.255.252.0 I can ping the RV042 router and the static IP address of the wildblue router but I can't ping the gateway on the wildblue side. Either from the PC or the Router diag tools.
View 1 Replies View RelatedLinksys Wireless Router :: E1200 Do Not Have Internet Access As Default Gateway
Nov 11, 2011I have my E1200 connected to my Netgear FVS318 router (which is a wired router) and the Netgear is connected to the internet.When a wireless client attempts to connect to the internet after automatically receiving an IP from the E1200, they do not have internet access as the default gateway that gets assigned is the IP of the E1200 192.168.2.100, which is not correct. It should be assigned 192.168.2.1, which is the IP of the Netgear router. Thefore, I have to manually set their IP addresses to use 192.168.2.1. How do you configure the E1200 to assign the correct Default Gateway IP to wireless clients who want to use DHCP?
View 4 Replies View RelatedCannot Access Internet From Mobile After Connecting To Wifi?
Nov 21, 2012I Cannot access internet from mobile after connecting to the Wi-Fi but can access internet from PC connecting via cable[CODE]
View 19 Replies View RelatedLan Not Working - Wireless Connecting But No Internet Access
Nov 9, 2011I have a modem/router, planet adw 4401, and i hadn't turned it on for about two months. A couple of days ago, i turned it on. And the Lan connection doesn't work. The lights just turn on at the moment i turn on the router and then they do not turn on. Ok , so i tried connecting through wireless . It did connect but it says no internet access.I'm a bit confuse in what's the problem
View 7 Replies View RelatedWireless Internet Not Connecting - No Access To Websites
Jan 12, 2013I've been having a really annoying issue with my computer not connecting to the internet wirelessly I start the computer, and a connection is there via my router for about 30secs-2mins. After this, I can't access any websites. The full five bars remain white and the router is still seen by the computer, but there is a small yellow exclamation sign in front of it, and a mouse-over says "no internet access". I can still access when wired to the router through a cable, so I thought it might be an issue with my wireless card, but wireless USB adapters don't make a difference, even when I've disabled the wireless card. My drivers are all up to date, and I've even tried a full reformat and reinstall of Windows 7, to no avail. Other devices (a couple of computers and phones) can connect to the router fine, and the network even tried a new router, with no success. I have experienced this immediately after the reinstall, before either firewall (I use ZoneAlarm Free) or AV (I use Avast! Free) were installed, and I'm completely stuck.
View 19 Replies View RelatedUnable To Access Internet After Connecting To VPN Using Cisco VPN Client?
Aug 4, 2011On my Windows 7 laptop, after connecting to my office Network using Cisco VPN clientThe entire Internet is utilized by the VPN. I am unable to browse the internet on my computer till I disconnect the VPN Client.
View 3 Replies View RelatedConnecting Netgear R6300 Wifi Router To Old Gateway?
Oct 3, 2012I have been using a cable modem gateway - Netgear CGD24G from Charter for two years. I just bought Netgear R6300 wifi rounter in order to upgrade the speed and range for my internet. My goal is to upgrade 802.11g to 802.11ac. Is there any special way to setup it up? Or do I need to contact Charter to replace a new gateway?
View 7 Replies View RelatedCisco Switching/Routing :: 1841 Tunnel Without Default Gateway Not Connecting
Feb 12, 2012I'm trying to configure an IPSEC VPN + tunnel for multicast data. When the default gateway is set on the router (1841) it works fine but if I only set a route to the IPSEC peer via our gateway then the tunnel fails to come up. The end point is to a 3rd party. [code]
I found that if I add a static route for the tunnel destination via fa0/0, the public facing interface, the tunnel comes up..ip route 10.23.4.2 255. 255. 255. 255 FastEthernet0/0
and I can then ping the tunnel IP at the far end - 10.23.0.5.Why would that be? Is there a better way to do this without using a default route??
Linksys Wireless Router :: Connecting WRT300N To Uverse Gateway - Dynamic IP Address?
Feb 6, 2012I have a WRT300n router and want to connect to my Uverse Gateway. When I connect them & try to use the internet connection I get an error that says a connected router must be capable of using DYnamic IP addresses.
View 1 Replies View RelatedShould A Wusb54gsc See Signal From A Sbg6580
Feb 23, 2012should a wusb54gsc see signal from a sbg6580
View 3 Replies View RelatedSBG6580 Will Not Connect To Network?
Jan 3, 2013Model SBG6580 dropped offline last night. I called Charter my ISP. The Modem IP address has changed. I get no internet connectivity. Computer appears to connect to the network but ID' s it as an unidentified network. I have tried to connect both WIFI and wired.[CODE]
View 1 Replies View RelatedWhere To Find Network Security Key On Sbg6580
Apr 10, 2012where do i get the security key
View 1 Replies View RelatedBest Settings For SBG6580 DOCSIS 3.0 Modem?
Aug 15, 2011i just recently upgraded to Road Runner Extreme which Uses DOCSIS 3.0 SBG6580 Modem and i was wondering what internal settings i should use to maximize my speeds and online gameplay. I'm running a Ethernet line into my Xbox360 and wireless for my laptop. Also, i was told that Road Runner Extreme would get me 35Mbps downstream and 5Mbps Upstream, yet these are the speed test's i'm getting [URL]
View 1 Replies View RelatedSBG6580 Low Signal From Home Routers
Sep 11, 2012I have a broadband Motorola SBG6580 cablemodem that feeds internet into my main home computer via a cable. The modem is also a wireless router.The modem is in an "office-room" inside my house. The main bedroom is located about 25 meters, with two bedrooms in between the office-room and the main bedroom.I broke a leg so I figured I could work on bed, but I have this problem: the signal from the motorola wireless router is so low at the main bedroom that the connection drops all the time. Oddly (or maybe not), I can see like 10 other access points, presumably from my neighbors, all with a full signal. And I live in a "full-floor" apartment so I only have neighbors above and below.I connected a linksys WRT54G2 that I have and I get the exact same problem.
View 5 Replies View RelatedMotorola SBG6580 / How To Change The SSID
Mar 12, 2012Motorola SBG6580, How do I change the SSID?
View 1 Replies View RelatedSBG6580 Private LAN Subnet Conflict
Jun 28, 2012I have a Motorola SBG6580 wireless gateway/router and am happy with it in general. I had a 192.168.2.n subnet with old Linksys but I find that I cannot change the MOT from its pre-set 192.168.0.n net to the ..2.net because it conflicts with a "private LAN" in the same range. How do I change the provate lan to, for example, ..9.n so I can use the ...2.n net? I'm running with the ..0.n now, just fine, but, I VPN into office and primary net there is ..0.n and so is confusing with IP shortcuts/conflicts. how to make the change?
View 1 Replies View RelatedMotorola Sbg6580 Configured With Vonage?
Dec 9, 2011Can the SBG6580 be connected to the Vonage router and function?
View 1 Replies View RelatedRun Motorola Sbg6580 With A Netgear Wndr4500 Router?
Apr 26, 2012I have time warner internet service and just upgraded my service to their extreme internet. In doing so I had to change my modem to a docis 3.0 modem; the motorola sbg6580. Its a modem that has a router and wifi built in but its really bad and not nearly as good as my net-gear router.
View 6 Replies View RelatedMotorola Surfboard SBG6580 / 2nd Computer Keeps Randomly Disconnecting From LAN?
Oct 12, 2012I have a 2nd computer wired up to my modem, but the LAN keeps randomly dropping every 2-5 hours It never drops for my main computer.I tried swapping cords and ports, but it still disconnects, while my main computer remains connected The internet worked fine when connected to another modem in another house.Do you think this is a problem with the modem or Windows7?I hard-reset the modem to factory settings, but it still happens.the modem is a Motorola Surfboard SBG6580
View 1 Replies View RelatedAdding Belkin N Wireless F5D8236-4 To Motorola SBG6580
Jan 7, 2012Looking to add my belkin wireless router to Sbg6580 router as an access point to extend wireless. I've read up enough to understand the fundamentals - LAN to LAN, changing IPs, turn off DCHP etc. - but am confused by a couple of things.
First, belkin faqs says to Open the router page, click on "use as access point" (I get that) "Select Enable" (I also get that), and then it goes on to say "This will give you the options to set the IP Address and Subnet mask for the router.**These settings should match your existing network settings; by default the IP address will be set to 192.168.2.254 and the Subnet mask will be 255.255.255.0". Does this mean to set the IP address of the Belkin to that of the Motorola (which is 192.168.0.1) on this page?
Then the FAQ goes on to say access the LAN and "change the IP Address to something such as 192.168.2.47 or you can use 192.168.2.200.**As long as the first three sets of numbers match your existing network, you will be fine". I thought the LAN IP address should fall outside the DCHP range of the Motorola? So if the DHCP range for the Motorola is 192.168.0.2 through 192.168.0.250 then I'd assign 192.168.0.251 to the Belkin?
Motorola SBG6580 Where To Download Software To Configure Network
Jun 30, 2012I am missing my Installation CD, where I can download the software to configure my network (rename, etc.)?
View 3 Replies View Related