Model SBG6580 dropped offline last night. I called Charter my ISP. The Modem IP address has changed. I get no internet connectivity. Computer appears to connect to the network but ID' s it as an unidentified network. I have tried to connect both WIFI and wired.[CODE]
View 1 Replieswhere do i get the security key
View 1 Replies View RelatedI am missing my Installation CD, where I can download the software to configure my network (rename, etc.)?
View 3 Replies View Relatedshould a wusb54gsc see signal from a sbg6580
View 3 Replies View RelatedI recently got the sbg6580 an want it to work in bridged mode with my linksys wrt54g router. The problem is everything that is connected wirelessly like my Xbox or iPhone are connected to the Internet but my desktop pc which is a wired connection won't connect to the Internet.When I directly connect the modem to my desktop it works fine.
View 1 Replies View Relatedi just recently upgraded to Road Runner Extreme which Uses DOCSIS 3.0 SBG6580 Modem and i was wondering what internal settings i should use to maximize my speeds and online gameplay. I'm running a Ethernet line into my Xbox360 and wireless for my laptop. Also, i was told that Road Runner Extreme would get me 35Mbps downstream and 5Mbps Upstream, yet these are the speed test's i'm getting [URL]
View 1 Replies View RelatedI have a broadband Motorola SBG6580 cablemodem that feeds internet into my main home computer via a cable. The modem is also a wireless router.The modem is in an "office-room" inside my house. The main bedroom is located about 25 meters, with two bedrooms in between the office-room and the main bedroom.I broke a leg so I figured I could work on bed, but I have this problem: the signal from the motorola wireless router is so low at the main bedroom that the connection drops all the time. Oddly (or maybe not), I can see like 10 other access points, presumably from my neighbors, all with a full signal. And I live in a "full-floor" apartment so I only have neighbors above and below.I connected a linksys WRT54G2 that I have and I get the exact same problem.
View 5 Replies View RelatedMotorola SBG6580, How do I change the SSID?
View 1 Replies View RelatedI have a Motorola SBG6580 wireless gateway/router and am happy with it in general. I had a 192.168.2.n subnet with old Linksys but I find that I cannot change the MOT from its pre-set 192.168.0.n net to the ..2.net because it conflicts with a "private LAN" in the same range. How do I change the provate lan to, for example, ..9.n so I can use the ...2.n net? I'm running with the ..0.n now, just fine, but, I VPN into office and primary net there is ..0.n and so is confusing with IP shortcuts/conflicts. how to make the change?
View 1 Replies View RelatedCan the SBG6580 be connected to the Vonage router and function?
View 1 Replies View RelatedAcer aspire 7741Z-4633 with windows 7 connects wireless to sbg6580 gateway that was just installed, but no internet access. able to connect other devices.
View 1 Replies View RelatedI have time warner internet service and just upgraded my service to their extreme internet. In doing so I had to change my modem to a docis 3.0 modem; the motorola sbg6580. Its a modem that has a router and wifi built in but its really bad and not nearly as good as my net-gear router.
View 6 Replies View RelatedSince the new cable company won't let me use my SB6141, I need to pick up a new cable modem. One that works with Oceanic TWC is the new SBG6580. It has wireless built-in; however, I don't want to use it. Is it possible to use this modem and leave the wireless off? Or does the wireless automatically turn-on whenever the modem is on? With all that said, is the built-in wireless any good? I recently purchased an ASUS RT-56 and would prefer using it to some built-in system.
View 11 Replies View RelatedI have a 2nd computer wired up to my modem, but the LAN keeps randomly dropping every 2-5 hours It never drops for my main computer.I tried swapping cords and ports, but it still disconnects, while my main computer remains connected The internet worked fine when connected to another modem in another house.Do you think this is a problem with the modem or Windows7?I hard-reset the modem to factory settings, but it still happens.the modem is a Motorola Surfboard SBG6580
View 1 Replies View RelatedLooking to add my belkin wireless router to Sbg6580 router as an access point to extend wireless. I've read up enough to understand the fundamentals - LAN to LAN, changing IPs, turn off DCHP etc. - but am confused by a couple of things.
First, belkin faqs says to Open the router page, click on "use as access point" (I get that) "Select Enable" (I also get that), and then it goes on to say "This will give you the options to set the IP Address and Subnet mask for the router.**These settings should match your existing network settings; by default the IP address will be set to 192.168.2.254 and the Subnet mask will be 255.255.255.0". Does this mean to set the IP address of the Belkin to that of the Motorola (which is 192.168.0.1) on this page?
Then the FAQ goes on to say access the LAN and "change the IP Address to something such as 192.168.2.47 or you can use 192.168.2.200.**As long as the first three sets of numbers match your existing network, you will be fine". I thought the LAN IP address should fall outside the DCHP range of the Motorola? So if the DHCP range for the Motorola is 192.168.0.2 through 192.168.0.250 then I'd assign 192.168.0.251 to the Belkin?
I switched to comcast internet recently and got a new modem. The modem is the telephony Arris one, but the problem is that I already have a Motorola SBG6580 but can not use that for my wireless laptop options. I want to be able to use the SBG6580 as my access point and LAN, but it isn't allowed any internet to share wirelessly?
View 3 Replies View RelatedHow do you port forward Minecraft on a Motorola SBG6580 because I tried it and it didn't work I really want to have my own minecraft server,Dont say to go to portforward.com because I tried it and it didn't work it says the port is still closed when I check it on yougetsignal.com
View 5 Replies View RelatedI just got an E4200 and have a SBG6580 cable modem. I cant seem to set this up properly and my connection keeps dropping. What is the proper set up ? I would like to configure it so the cable modem handles the DNS and the E4200 handles the wireless.
View 4 Replies View RelatedI cant seem to to connect to my nintendo i have a motorala surfboard SBG6580
View 1 Replies View RelatedThis past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
View 1 Replies View RelatedI seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.
So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?
Camera set up with the Beta Mac wizard connected via ethernet on Airport base. Wireless security WPA2 Personal. Using DHCP. AirPort Utility 5.5.2, OSX 10.6.6.I can see the cam with the myDlink Lite iPhone (4) App when I am in my house with my wireless network. When I am out, away from my network, the App can't connect to the cam, tells me to check my network settings. I did the wps way and added the cam in the airport base utility *Access Control* tab but still doesn't work. Checked in the cam web page settings, can't figure out what the Pre-Shared Key is and where I get it/set it up in the airport utility...
View 1 Replies View RelatedI have 2 questions about a Network hard disk(for home using).I bought a hard disk (with a network card).This hard disk is connected to my "box"I have 2 questions...Is there a way to increase the speed of writing (20 Mo/s in usb) against 1 Mo/s in network.My second question is to find a way to connect to this harddisk from another network without using VPN
View 4 Replies View RelatedI have a question about my windows systems(XP and Vista) re-connecting to my network folders when my computers restart. I have some shared network folders on my Synology DS410. And then i mapped a network drive to use those folders.But every time i restart my computer i get the message "cannot reconncet all network drives"I have to put in my username and password everytime. I choose Remember login and password.How can i fix this so it automatically connects to these on restart?
FYI...
1 computer - Windows Vista Home Premium
1 computer - Windows XP Home
Both connected via wired LAN
My iSCSI drives connect just fine on restart. Just not my mapped network folders.
I have a home network and I need to connect 3 USB printers. I was searching online and I'm not sure if I needed a network switch, a USB network hub, or a multiport print server. I need all 3 PCs to be able to access any printer.
Here's what I have in mind. I'm just not sure what hardware I needed (red outline). The cheaper the better. Oh and I don't want a 24/7 PC running as a server.
Namely an Unidentified Network with no NETWORK access. Some information first, the NIC that Im using is the Realtek PCIe Family Controller, Ive updated the drivers, Ive uninstalled, Ive reinstalled. Ive basically been on the internet for the past two days trying all the solutions. Including refreshing and renewing my ip, trying a static ip (although, Im still not sure if I did this step correctly) Ive tried disabling IPV6, Ive tried adjusting my speedflux. The problem is also intermittent with seemingly no reason whatsoever, some days Ill go without internet for the entire day, then the next day Ill boot up my computer and Ill have internet again. It should be noted that when I enable WIRELESS on my laptop, Im able to connect to the network, but when I enable wired, I am not able to.
Here is the ipconfig /all for when Im connected wirelessly and have a connection.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
[Code]....
It should be noted that I am using powerline adapters for my connection, but as I said, this problem only recently started cropping up. I went fine for almost a week with no problems, then all of a sudden it started happening. Im still able to connect wirelessly so its not too much of an issue, but I prefer via Ethernet..
My pc is windows 7ultimate and my laptop is vista ultimate. the router is connecting fine to the pc. as i try to connect to the laptop it keeps saying unidentified network and local access only. i tired different things but nothing seems to work. it will work only when there is no password on the wireless.
View 3 Replies View RelatedRecently I've been having some internet problems. Namely an Unidentified Network with no NETWORK access.the NIC that I'm using is the Realtek PCIe Family Controller, I've updated the drivers, I've uninstalled, I've reinstalled. I've basically been on the internet for the past two days trying all the solutions. Including refreshing and renewing my ip, trying a static ip (although, I'm still not sure if I did this step correctly) I've tried disabling IPV6, I've tried adjusting my speedflux, believe me I've tried just about everything, I don't have one blue link left when it comes to my google searches on fixing this problem.The problem is also intermittent with seemingly no reason whatsoever, some days Ill go without internet for the entire day, then the next day I'll boot up my computer and I'll have internet again. It should be noted that when I enable WIRELESS on my laptop, I'm able to connect to the network, but when I enable wired, I am not able to.[code] I'm still able to connect wirelessly so its not too much of an issue, but I prefer via Ethernet.
View 2 Replies View RelatedI can't connect to network.
View 3 Replies View RelatedTrying to fix a XP computer that doesn't seem to connect to the network (wired LAN) via a Realtek RT8168/8111 PCI-E Gigabit Ethernet NIC. I don't have the network symbol in the task bar for some reason (the two over lapping computers) and when just clicking "repair local area connection" it can't renew the IP.I've tried:- new drivers- ipconfig /renew and /release- cable check (the same cable and connection works for other pc's)- pinging the hub with 100% fail despite hub recording a ping- checking IP settings are automatic- winsock- device manager (says everything isfine)- system restore
View 1 Replies View RelatedI'm having a problem connecting to multiple servers. I do know that I have stopped the windows firewall and taken out Norton and avg, yet I still can't connect to any servers. I've even tried on other networks! I can download torrents and surf the internet just fine though. I can't connect to an online class server to do my homework, and I've also tried to start playing WOW but neither will connect. I also don't see peer guardian 2 in *services*
View 7 Replies View Relatedi have two LAN 1:=IP10.44.0.76 subnet:255.255.255.0 & gateway: 10.44.0.1 ; 2:=IP DHCP,i want to do work both network. how can its possible.
View 3 Replies View RelatedI've got my network up an running and all my devices (wired computer, wireless PS3, wireless smartphone, etc..) can connect to the network except for one of my wireless computers. I've set the TCP/IP to obtain IP automatically and using the correct PPPOE username/pass I try to connect, but it never works.
View 4 Replies View Related