I am using a win server 2008 in my company, recently my staff have being using internet a lot for downloading and many other unnecessary software therby redusing overall bandwidth.Is there any software solution i can use for controlling bandwidth of my client computer from server2008 computer.
View 3 RepliesI have several computers connected to the network, can I restrict the download bandwidth on specific computer?
View 3 Replies View RelatedI want to control bandwidth of our computers in network. We are using TPLINK routers. I already done ipqos setting in the main router but it doesn't really effective. I also tried ipqos in the routers(which is used as WAP) but it also not effective.
View 8 Replies View Relatedwhat are branded include bandwidth control function , dual WAN port
View 1 Replies View RelatedThis has finally become a BIG problem. Any time I have iTunes running and downloading podcasts, it hogs all the bandwidth for the Internet (but not the local network). This is not only slowing down access from the machine running iTunes and the downloads but for every other device trying to web browse.I'm running two Macs and one Windows/Dell PC on the network. All are hard-wired (Ethernet) to the DIR-655. How to throttle iTunes? I did some research and found that I am apparently not the only one having this issue.I'm about to bail on iTunes entirely and try to get used to Miro, which does allow bandwidth control.
View 3 Replies View Relatedi have a 3550 catalyst and i configured it for bandwidth controlling i have used POLICE command its work fine and i saw it limit the bandwidth but there is a little problem when i limit the bandwidth at 1024000 and i useing all the bandwidth and monitor the bandwidth i see it shows the network uses half bandwidth.
View 6 Replies View RelatedI have a router with 2 service providers connectivity with different ASN and running with BGP.I've announce few IP-prefix by ISP-A and Few Prefix by ISP-B.Both are working well with redundancy.But,Problem is here, that the all uplink bandwidth goes through ISP-A link.I want to make it that, ISP-A routed ip-Prefix's upload data will go through ISP-A & ISP-B IP-Prefix's Upload data will go through ISP-B Link.
View 9 Replies View RelatedRegion : UnitedArabEmirates
Model : TL-WR941ND
Hardware Version : Not Clear
Firmware Version : 3.13.9 Build 120201 Rel.54965n
ISP : etisalat.ae
How to controller wireless bandwidth in WE941ND.
Region : Spain
Model : TD-W8968
Hardware Version : V1
Firmware Version :
I have a TD-W8970. In settings "Bandwidth Manager" there is an option to put a value between 1 and 8, but does not specify which is better (1 or 8). What the value to give more priority to a computer to another?
On Nexus 7000s I want to limit bandwidth of particular IP. I can do this using proper configuratio of IP ACL, policy map and class map. But what if I dont have information on interface? Can I apply bandwidth control for particular IP without knowing the interface?
View 3 Replies View RelatedI`m searching about bandwidth control down and upstream with vlans, i found many options but no one works good, follow some examples i have found on the internet
View 1 Replies View RelatedRegion : India
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : MTNL
After lot of troubleshooting and efforts I figured out there seems to be BUG with routers firmware 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n.When you enable Bandwidth control, FTP stops working from Internet. However, it does work from local network. When you disable Bandwidth control, FTP starts working from internet as well as local network.
I would like to know about asa 5500-x. Does it supports application visibility and granular control for different applications. Moreover bandwidth control based on different users and different applications
View 1 Replies View RelatedWe have 3 sets of applications. The first does not require much bandwidth but is very critical, the other two is more bandwidth consuming but less critical. I would like to know if it's possible to reflect this priorities on the router configuration. Is it possible to set the ports 10000, 10001 and 10002 of the external IP have higher priority to be handled, for example? Also, is it possible to limit the bandwidth that goes through a set of ports?
I must prevent the 2 sets of less critical applications to strugle the critical ones. What router can provide this capabilities? Is the 1921 able to do this job?
Region : UnitedKingdom
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Looking at the manual for this router in regards to bandwidth restrictions.When you set up the Rules under Bandwidth Control does this setting shared by the IP range or does each IP in the range get that amount of bandwidth?
I enabled SBL on ASA 8.4, anyconnect client is Win-XP, everything worked as expected, but some users do not want to see SBL logon screen before windows logon because often times they will need to login before they can get network connection. So I modified profile.xml's following line from
UseStartBeforeLogon UserControllable="false">true</UseStartBeforeLogon
to
UseStartBeforeLogon UserControllable="true">true</UseStartBeforeLogon
the new profile is downloaded to client machine's anyconnect vpn profile fine, yet still users see VPN logon screen before Windows log on, "Connect on startup" is un-checked on Anyconnect VPN client, client machines rebooted multiple times, Anyconnect VPN client was removed and re-downloaded from scratch, no change ... What else do I have to do? I certainly can create a new group-policy/tunnel-group for those users without SBL, but that is far from an elegant solution.
We have an internal DNS server that all internal hosts do lookups to .. these requests are forwarded onto open dns for anything the dns server isnt authoritative for.. My question is we have purchased the botnet filter and this requires the asa5505 dns client to be active on at least one interface .. Should i point the asa dns to an external IP such as 8.8.8.8 and apply DNS enabled on interface outside ( am using asdm) I don't want the ASA to control DNS for our internal clients we already have a internal server for this, i DO want the asa5505 to check dns packets against its botnet filter, whilst still using open dns for forwarding.
View 1 Replies View RelatedWe have been using the VPN client for a very long time. Our most current VPN setup is using an ASA 5510, without split tunneling. We tunnel all traffic. We are using IPSec group authentication off of an AD domain controller.
Recently I have been having some issues with some of the client machines, and I can't for the life of me figure out what the issue is. Some machines will not respond to pings, and I cannot remotely access the machines (using Dameware Remote Control) while they are connected to the VPN. Other client machines work fine. In fact there have been a couple instances where I have two machines in a remote office, using the same internet connection, both connected to the VPN, where I can ping and remotely manage one machine, but not the other. If RDP is enabled, I can sometimes get into those problem machines via RDP. But this is crippling our ability to remotely support many of our VPN users, and I just don't know what to look for.
I have tried disabling Windows firewall completely, and that does not seem to work at all. The only other thing I can think of is I recently upgraded our McAfee software. But it does not prevent us from getting connected to or pinging any of the systems on our physical network, nor to half of our VPN users. Most of our clients are running Windows 7, or Vista, and using the client version 5.0.07.0290, or 5.0.05.0290. Most of the clients using 5.0.07.0290 are using the 64-bit version.
I have just installed LMS 4.1 on a Win2008serverR2. Getting started and discovery are OK. Then I tried to configure all parameters under the Admin Menu. I have a problem with SWIM : the "repository" directory does not exist ! I also tried to import an IOS file into the repository : no way.
View 3 Replies View RelatedI have a customer that wants to restrict SSIDs that groups get based on their AD credentials. Currently, he is using Windows 2008 Radius Server and AD with Cisco 5508 WLCs. I found examples that shows this is possible but my question is if I have 2 user groups (teachers and students) in AD and apply a policy for the Radius to send SSID x to teachers and SSID y to students. Upon successfully authentication, would this deny teachers access to SSID y and students access to SSID x?
View 10 Replies View RelatedWe are about to share a 10 MBit ISP connection with 2 others companies, and they are going to split the bill up into 3,3 and 4 Mbit, so we where thinking that we could setup a switch before their and ours router and provide them with a static IP from our ISP. But is it possible to set a bandwidth limit on the ports of a Cisco Catalyst 2960-8TC, so that we can set a limit of 3,3 and 4 on 3 ports.
View 1 Replies View RelatedHow to configure Belkin N (F5D8636-4) Client IP Filtering so that a range of client IP' deny access to the internet using the following blocked time ranges e.g. Mon 5:00pm to Tues 2:00pm, Tues 5:00pm to Wed 2:00pm, Wed 5:00pm to Thur 2:00pm, Thur 5:00pm to Fri 2:00pm, Fri 5:00pm to Sat 10:00am, Sat 1:00pm to Sun 10:00am, Sun 1:00pm to Mon 2:00pm - BTW - this access regime is to deny internet access for my teenage son?
View 3 Replies View RelatedI have an office with a network that I have no control of. I can't access the router to make changes at all. The router does have a real IP address.There is a server on this network that I need to access through remote desktop. (Terminal services on Windows Server 2008)Normally I would just pass 1723 through the router and set up VPN. Without control of the router I am lost. I really don't want to use services like Logmein or Gotomypc, because these control the console.
View 1 Replies View Relatedi am facing the same problem now but am using windows 2003 server
View 1 Replies View RelatedI am looking a way to allow/block certain users to access internet.
View 2 Replies View RelatedRegion : Others
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
I am struggling to get a printer added through the print server. The printer is set up in the TP-Link USB Printer Controller and selected as the auto-connect printer. I can scan through the server, but can't add the printer in control panel or see it as a option when printing. The printer is a Samsung SCX-340F.
I have an Ubuntu Server, when someone is downloading a file from it, my bandwidth significantly decreases, how can I cap it?
View 5 Replies View RelatedI'm planning to deploy PPPoE Server (Cisco Router 7609) for an ISP. This ISP will provide Internet connection for customer over Ethernet (QinQ VLAN).I have to provide a solution to assign bandwidth to each customer by RADIUS. I found some documents about this function but they said that it could work with PPPoA or PPPoE over ATM only. So which method I shoud deploy to get this goal?
View 1 Replies View RelatedI'm planning to deploy PPPoE Server (Cisco Router 7609) for an ISP. This ISP will provide Internet connection for customer over Ethernet (QinQ VLAN).I have to provide a solution to assign bandwidth to each customer by RADIUS. I found some documents about this function but they said that it could work with PPPoA or PPPoE over ATM only. So which method I shoud deploy to get this goal?
View 1 Replies View RelatedI insert data from two clients.(1 window server 2003,2 XP clients ) the two client print paper and the printer is shared printer. At the same time two clients print paper and the printer stop working. So I restart my two clients and server. After restart the clients cannot ping to server.
View 1 Replies View RelatedI am trying to connect some thin clients to a domain based windows 2003 server. This the first time mi trying to do this. If the computer is set to workgroup there is no problem. The problem comes up when its a domain based server.I keep getting the message that the user is logged in. The host computer connecting to the server has the user name "thinclient" and I use the name "user" to log in from the thin client. But it says "thinclient" already in use and disconnect my connection between the host and the server.
View 2 Replies View RelatedI am installing Window Server 2008 with file Services, and I am making my clients to save files to their documents folder but those files are being saved straight in the Server. I was wondering if It is better to save files direct to the server or save files in each client?
View 2 Replies View RelatedA Windows Server 2008 r2 with 2 internet ports. One (IP: 10.0.96.132) connected to company intranet and one (192.168.10.1) as DHCP server connect to several PCs (192.168.10.**) through a switch.The problem is the PCs (192.168.10.**) can ping the DHCP server (192.168.10.1) , while DHCP server (192.168.10.1) can not ping (192.168.10.**).How to configure the server so that all these PCs can access the intranet?
View 4 Replies View Related