D-Link 2740B Modem / Router - Can't Login To Web GUI
Sep 6, 2011
I have a D-Link 2740B with the 2 antennas and sloping black case and for some reason I now can't seem to login to the web GUI via 192.168.1.1. The modem is working OK but there is a setting I need to change.IE says "Internet Explorer cannot display the page"A friend then recommended trying Firefox. This worked the first time but now it is not connecting either. On http://192.168.1.1/ I just get a blank screen.I've turned the power off on the modem for 15 minutes and back on, and rebooted the computer.I've also tried turning Norton Antivirus & Firewall off but this didn't make any difference.I run Windows 7 Home Premium 64 bit with SP1.I've avoided resetting the modem as I am of the understanding that means I have to start from scratch with all the settings.
I have a DLink 2740B and 4Mbps account.I get great signal strength but browsing is realllllllly bad...but when i do a speed test, i get about 3.2 to 3.5.I tried all kinds of sites, torrents, downloading files....hell...even google.com doenst load sometimes.
a few days ago i had a router dlink 2740b and i made a dedicated server of call of duty4 where my friends and i played. yesterday i changed my router with another dlink 2740b f1 version (a new version of the same router): i make port forwarding for the cod4 server but the server doesn't go online....i see it only in local....but my friends and i don't see it in the internet server in the game menù...
With these Dlinks. But, like a lot of people when I go to my router via [url]... and try to login it says "invalid password" And yes I am leaving the "Password" line blank. I need to get my BSSID to get my Linux laptop going WIFI. I have also tried the http://192.168.0.1
I have an internet connection with a wireless N belkin router but want to run a dir-615 wireless N via my ps3, basically run ethernet from ps3 to dir-615 then want that to act as adapter and work with my N belkin router to get full n capabilites on ps3 as its built in adapter is only g and streaming HD is slow?? i have had a look at ap mode and disabling dns relay and dhcp but cant login via the router then?? do i need static ips or something??
i just bought a Netgear WNDR4000 router due to troubles with my current modem/router combo (D-Link DSL2730-B). The router doesnt have in built modem functionality obviously so I need to set up the modem/router as a dedicated modem.Also should I use the current modem/router as the dedicated modem or an older model i own (I think its a DSL 502T)? Because the current one often drops the internet connection. Don't know if its a problem with the modem functionality or something else. Will the older one serve better since i didn't have any problems with that one or will it be outdated? I only upgraded due it not having wireless capabilities. Otherwise it's fine.Or will I be even better off buying a dedicated modem? I really don't want to spend more money but if this is a far better alternative I guess i will.
EDIT: Ok so found out that I have to put the modem/router in bridge mode in order for this to be possible. However, looking up how to do this lead me to a dead end because i need to fill in some fields that i have no idea how to interpret.
VPI: VCI: These 2 already came with presets. Should I just leave them? Select DSL Link Type (EoA is for PPPoE, IPoE, and Bridge): Choices of EoA PPPoA and IPoA Encapsulation Mode: Choices of LLC/SNAP-BRIDGING and VC/MUX Service Category: UBR without PCR, UBR with PCR, CBR, Non Realtime VBR, Realtime VBR
I have been using d link routers for a very long time. However, recently I have a problem with one of my dlink router..
Basically I have a Wireless N 150 Home Router (DIR-600 B2). I managed to reset and login to the router at http://192.168.0.1. I tried to made some configuration (disabling DHCP, some stuff, basically I was trying to configure this router as Wireless Repeater to connect to another room downstairs).
So it didn't connect so I do a reset (hold a pen for 20+ seconds at the reset button) and now I cant login to the router at http://192.168.0.1..
D-Link Router 615, with Xplornet Satellite Internet <-(internet sucks).
We got the router about 5 months ago and it has been good, few losses of connection and you have to reboot which is understandable. The internet is always random so if the router needs reset/reboot its no problem.
However about a month or so ago its started redirecting constantly once you put a website in the address bar. Its not always the same sites either. Sometimes its google for part of the day, some times the site wont work for a week. It redirects me all the time to the D-Link Router Log In, and no matter how i try to access the website im trying to go to, it redirects me to the D-Link.
Whenever I enter 192.168.1.1 to access the login page of my router, I cant access it to configure it even after resetting it !I also tried changing TCP/IP settings to static as mentioned in the router's manual but it dint work?
I have a dlink cable modem and dlink dir-655 router. When the router is first turned on or a setting is changed any/all of the computers here can connect to the Ultima Online game server for login but within a few minutes most will not be able to. Its as if they are being refused a connection to login.owo.com (I think that is where they connect to). 1 maybe 2 computers can still connect but its fickle and can't know which 1 or 2 it will be or for how long.any computers already connected to a game server are fine its just the ones trying to login after the router has been running for a few minutes. My first assumption 2 days ago when this happened with my dlink gaming router was that the router developed a problem but now with a new router its still happening. The problem started when I re-enabled the wireless on my gaming router and when I noticed the problem I re-disabled the wireless but the problem persists. A new modem (the DIR-655) did not work...
We have a Linksys WRT120N wireless router set up at one of our small offices. I noticed recently when trying to log in to the router to make some admin configurations that it will not accept the login credentials when trying to log in from IE10 browser. Works fine from Chrome, IE9, ect. logging in to a linksys router with IE10?
Region : UnitedKingdom Model : TD-W8961ND Hardware Version : Not Clear Firmware Version : V.3 ISP : ADSL24
Using windows 7 and 8 on different machines I am unable access my routers web based set up.
I enter the usual "admin" and password in the login box. 3 goes and then get error message. or hangs on waiting.(connected to the router with Ethernet Cable). Could this be a windows based problem. I think it was ok on XP but that is gone now. Router is working fine but I just cant access it to alter any settings.
My 2 other spare routers which are not TP-link also have the same problem.
I have Linksys Befcmu10 v4. I need to port forward and I cannot login. I have tried admin/password and all those combinations. I tried factory restore by pressing the thing in the back and still can't access the page
i'm having some trouble logging in as admin. I leave the password section blank as directed but it comes up as "incorrect password". I then tried the same using the "User" and it worked just fine but i cant change any of my settings.
I ordered the D-link DIR-815 router online at [URL], and I'll be receiving it this Monday which is the 14th, so I am asking my questions on here now, so I could be prepared.
1.) I don't have a wireless card in my PC, so I will be connecting wired to get WiFi via WAN and LAN ports, right? First before I forget, I have a Windows 7 32-bit desktop PC. We are working with a DSL modem residential line without phone line using a coaxial cable, and Ethernet cable from modem into the PC. connecting this D-link router to my modem and WiFi, and for me to use the WPA2 security?
2.) I have an iPhone 4 with Verizon. If I want to use my iPhone to get WiFi from the router, and turn off the Internet on my phone, and use WiFi only on my phone, how would this work?
I have a dir 655 coupled with a 320b modem for adsl. Now I must switch to VDSL. Can I use the router with a VDSL Modem? Which modem could be used ? I do not see dlink products ..
I have a buddy who owns a bar and wants to install a insecure wireless router for his customers downstream from his SBC Global ATT Modem/Wireless Router combo.
He says has 3 static ips for the modem, and 1 of the network cables coming from the modem directly into the D-Link Router. I first attempted to just plug it into the uplink, and let DCHP do its magic, but I had no luck with that. I could connect to the router but it didn't have internet.
So I restarted the downstream router, and plugged the network cable into the 1st port, and suddenly I had internet on the wireless but it would constantly go up and down, and ping times were extreme erratic.
typing 192.168.0.1 just times out when there no internet connection problem. I can go into my modem settings through. I don't know when this problem started as I hadn't needed to log into my router in over a year. I tried resetting it and still can not go to the log in page. I noticed a few months ago my NAT type went from open to strict on my xbox live but didn't really care at the time
I have a DIR-615 router that I can not see the characters that you have to type just a read X on login screen on any computer running IE9 even the emulator on the dlink site shows this problem.
I wanted to update the F/w on my rev b dir 825, but unable to load the login console for admin, I haven't changed anything and the router was still on 2.07NA f/w
Region : India Model : TL-MR3220 Hardware Version : V1 Firmware Version : 3.14.2 Build 120817 Rel.55520n ISP : Tata Photon Whiz
I just bought the TP Link MR 3020 and tried connecting my Tata Photon Whiz USB (Huawei EC121) modem with it. The TP Link cannot identify the modem. It goes forever into identifying mode. I next tried a Huawei E173 with Reliance 3g sim in it but again no results. The TP Link goes into identifying mode forever. I have installed the latest firmware for the device but am not able to set it up.
Region : UnitedKingdom Model : TL-MR3220 Hardware Version : V2 Firmware Version : 121126 Rel.70304n (BETA) ISP : T-mobile
there is a bug with MR3220 Router. I have HUAWEI E398 modem. It makes a LTE connections, everything works OK for half an hour, sometimes for a couple of hours, but then it (router)just unplugs modem after some time.ere is log:1st day 00:44:50DHCPNOTICEDHCPS:Recv DISCOVER from 8C:70:5A:8F:F0:E01st day 00:34:473G/4GNOTICEmodemUnplugedTime >=60s1st day 00:33:513G/4GINFO3G Modem is plugged out.1st day 00:33:493G/4GNOTICEdhcpcLteModemRelease 1261 sysCmd = ifconfig lte0 0.0.0.01st day 00:33:48DHCPINFOdhcpc_ipc_data_rcv_router 675 : current network type = 11st day 00:33:48DHCPNOTICEDHCPC Entering released state1st day 00:33:48DHCPNOTICEDHCPC Unicasting a release of 178.160.9.196 to 178.160.9.1931st day 00:33:473G/4GINFOprocess_msg 322 : call dhcpcLteModemRelease1st day 0:33:473G/4GINFOLTE MODEM = 0, status = 0, targetVendorID = 0x0, targetProductID = 0x0 1st day 00:33:473G/4GINFOLTE MODEM = 0, status = 1, targetVendorID = 0x0, argetProductID = 0x01st day 00:33:473G/4GNOTICEhandle_card start1st day 00:01:08DHCPWARNINGLTE Network connected.
Region : Belgium Model : TL-MR3220 Hardware Version : V1 Firmware Version : 3.12.21 Build 120523 Rel.37880n ISP : 3G mobile
My router TL-MR3420 does not connect to my 3G modem. I did all the steps according to the router configuration. Despite of that, once it is on the status it doesn�t recognize my modem, HUAWEI, model number E1820.
i just installed a dlink dsl-520b modem. I installed it using the cd wizard without the router connected. Now when i try to hook the router [dir-655 rev B v2.10NA] up the world light is orange and i cannot get a connection. I tried running the wizard but it times out and says it cannot find the server. I used the reset button and that did not work. It says to use a PPoe connection and i have the right password but it will not connect.
Region : Italy Model : TL-MR3220 Hardware Version : Not Clear Firmware Version : 3.14.2 Build 120822 Rel.57775n ISP : Vodafone Region : Italy Model : TL-MR3220 Hardware Version : Not Clear Firmware Version : ISP : Vodafone
my MR 3220 cannot manage tp-link Ma180 modem. At start-up it tryes to identify the modem but after a while the status of the modem shows "Unplugged"
I already updated Router Firmware version. Firmware Version: 3.14.2 Build 120822 Rel.57775n Hardware Version: MR3220 v2 00000000 Signal strengts is weak but enough to access Internet when Ma180 is connect to my PC.
A piece of system log follows:
Index Time Type Level Log Content 9 1st day 00:17:00 3G/4G INFO LTE MODEM = 0, status = 3, targetVendorID = 0x0, targetProductID = 0x0
I was trying to access the modem router as the admin but AT&T seems to have a pain in the butt security system from me making any changes. I wanted to forward some ports to setup my Synology DS212j Network Attached Storage (NAS). I connected my d-link router to the already setup modem router which I am now connected to. I have to run off to school but I was wondering, would I be able to forward the port off my d-link DIR-601 and be able to host my NAS server off that?
I don't have too much in-depth networking experience besides setting forwarding ports, setting static IPs, but I can't do that since I am not the admin for the AT&T router. I figure the password for the AT&T router is just defaulted to admin or blank but I haven't had time to fully test everything out.
I moved to a new apartment and have to wait a month or even more to get my DSL internet, so I temporarily got myself a USB 3G device to have some access to the internet till I get my DSL line.
The USB acts as 3G modem for a single PC that's connected to it, what I want is to share that internet using my D-Link DIR-655 router so I'd be able to connect my iPhone and PS3 as well.
How to get that setup working as smoothly as possible would be great. DIR-655's default gateway is 192.168.0.1, and the auto DHCP range IIRC is 192.168.0.100 to 192.168.0.199.
changed the router wan access pwd and now trying to test the dap i can't seem to log in with the default ip / dlinkap url access i have tried the bridge and ap switch setting on the dap with no luck after resetting the dap a couple of times with no luck ..
All of a sudden this morning, whenever I login to the router, I get this truncated output displayed in my browser just as I paste it below (this is 100% of what is displayed in the browser window):
