D-Link DIR-615 :: Can't Get Out Of Emergency Room / Bad Flash
Jan 23, 2011
I have a DIR-615 D4 (Original firmware V1.00VG), I tried to install DD-WRT using all the guides online and here, but no matter what i do, the router does not seem to successfully complete the flash?
- successfully entered emergency room
- uploaded the bin file
- power light turns off (but link to machine light still on)
- left it for a good 10 mins to be sure, and still no life out of it
- power cycled and router goes back to emergency room
So i then tried to revert back to the V1.00VG;
- uploaded bin file
- power light stops flashing and stays on solidly (link to machine still green)
- left it for a good 10 mins to be sure, and still no life out of it
- power cycled and router goes back to emergency room
View 4 Replies
ADVERTISEMENT
Mar 16, 2012
My question has to do with the low signal strength of my dir-655. I have it set up in the second bedroom of my apartment. When I am sitting in my living room (about 30 feet away) it's really hard to pull in a signal of more than one bar on my phone, or two bars on my wife's kindle fire and will often drop the signal all together. But, if I search for networks, tons of other routers come up with excellent signal strength from our neighbors. Is there something I need to know about expanding the signal strength?
View 3 Replies
View Related
Dec 6, 2012
My samsung galaxy next turbo GT-s 5570 keeps saying emergency calls only all the time?
View 1 Replies
View Related
Feb 11, 2013
-Region : UnitedKingdom
-Model : TL-WR841N
-Hardware Version : V8
-Firmware Version : 3.13.18 Build 120522 Rel.31564n
-ISP : Virgin
I bought a TL-WR841N to use instead of our Virgin Super-hub which dropped the wifi regularly. It took me a while but I stumbled with the set up and got it working.Super-hub (in modem mode) - cable - TL-WR841N - 2 x cables running to 2 switches for (TV, Sky+, WII) and (PC, X-Box). Everything is spot on apart from the other half's Iphone and Ipad. Neither of them can get on the web in the bedroom. Both apples will join the network, but none will be able to get onto the web. The Wifi bars are on display on both products but they just keep spinning and searching to get on the web. I bought a Huawei repeater plug hoping that would work, but it just slows down everything else that can get on the network.Remembering that this happens only in one room, is there something that I can alter that would let these 2 apples access the web besides walking out on the landing every time she needs to update a web page ?
View 5 Replies
View Related
Oct 3, 2011
I just recently bought this router (DIR-615 rev E3) to act as a Access Point for the dead wifi spot in my room downstairs. I set up everything properly (Turned off DCHP, set ports and gateway..subnet blah blah) and it was working fine. My wireless speeds were perfect, and had no issues with that. However, my wired speed was significantly slowed down. I have Verizon Fios and have the wire from that plugged in to LAN port 1 on my DIR-615. I have another wire going from Port 2 to the back of my PC. My normal speeds are about 30mbps down and 25mbps up. When I connect my internet through the second router (DIR-615) I get a maximum of about 3.0mbps up and down, doesn't go much higher than that. The wireless however, gives me about 11mbps both ways, which is fine.
I thought it might have been a firmware issue so I flashed to DD-WRT (build 15778), but the problem persists. I've tried most everything and am getting desperate. There's absolutely no logical reasoning for the slowdown. I have confirmed it's a router issue because I also turned off wireless on my laptop and plugged that directly into the router instead of my desktop and get the same 3mbps.
View 11 Replies
View Related
Feb 26, 2012
Trying to copy the system image file from the sup-bootflash to a new 64MB ATA flash card. Yes the software can support the 64MB card.
The ATA flash card was formated successfully, however I cannot copy the system image to it so that it can boot after a power loss.
The command I tried was: console(enabled) copy sup-bootflash: slot0:
The source filename was typed in as shown in the Show Verison command.The result was: Error opening slot0: no such device.I suspect that I am missing something obvious as I am new to Cisco Switches.
View 1 Replies
View Related
Feb 5, 2011
I run a DIR-825 as an access point on my home network and I upgraded the firmware from 2.03Na to 2.05NA and it looks like it was a poor flash. Orange Amber power light, no wireless radios, unable to access it via its configured ip or default (192.168.0.1). It will not respond to pings, give arps, or obviously the web browser session.Is there any way to reflash these things manually or do I have to send it in?
View 2 Replies
View Related
Dec 7, 2011
I recently updated my firmware to dd-wrt... now I would like to switch back to stock firmware. I don't like the fact that any change I make basically resets the router. Plus DD-WRT GUI is VERY slow for me?I've followed every tutorial on how to do this, but the router will not accept the stock firmware. I've gotten the image to upload (according to the browser), but at 100% the flashing orange light & globe light just continue to blink & do nothing. I never see the other lights "flash" confirming the upgrade has took. I've set my IP manually through "Network Connections>Properties>TCP/IPv4" before trying. I get to the emergency firmware page...set it upload Version A1. Sometimes it uploads...but like I said, it never takes.
View 11 Replies
View Related
Feb 6, 2011
I hope that we can get this DIR-825 back from the dead. I did the first portion of the 2.05NA upgrade while wired into LAN1 on the unit, after the reboot the power light went Amber and the unit would no longer respond to pings. I have searched around for various reset methods but have not been able to find a guide or a definitive current D-Link tech manual on how to fix a bad flash. I have tried pinging/arping/web browsing its default IP and the IP I had it set to to no avail.
View 2 Replies
View Related
May 17, 2011
For about 3 minutes the 2.4GHz and 5GHz LEDs began to flash in sequence, [2.4-5-2.4-5-2.4-5-Both-Both], it just kept doing that. During that time wireless connections were unresponsive. When they went back to normal I checked the router and it didn't reboot or anything. This is the first anomaly I've ran into running the 2.05NA FW.
View 6 Replies
View Related
Dec 5, 2011
So i'm living in an apartment and brought up my pc desktop from home, issue is that the internet cord was not long enough to connect from my room to the modem outsideTheres apparently an internet jack in my room and i have no idea how to set it up to respond to the modem thats currently placed in the living room.
View 1 Replies
View Related
Jan 24, 2013
In 3g tower room there is ceragon fibeair4800, maipu mp801e installed.i want to know how can i use internet using lan cable inside tower room. i have access to the tower room.but there are several ports and equipments inside.
View 2 Replies
View Related
Aug 23, 2011
I have time warner cable as my ISP, and have a netgear wireless modem hooked up to the only computer in house, in my living room, but I would like to have internet access in my room as well (where my rig will be). What do I need to get? I was thinking of getting a wireless network adapter PCI card, but am a bit concerned that I will then have to deal with laggy connections while online gaming.
View 3 Replies
View Related
May 13, 2012
My laptop's internet connection was doing very fine a long time ago. But once time, I went to my brother's room to use it and then i came back to my room and it works very slow until now. I don't know why it happens because the other laptops in my house are doing fine, only my laptop's connection is slow.
View 14 Replies
View Related
May 13, 2012
My laptop's internet connection was doing very fine a long time ago. But once time, I went to my brother's room to use it and then i came back to my room and it works very slow until now.I don't know why it happens because the other laptops in my house are doing fine, only my laptop's connection is slow.My friends suggested that I should change the internet channel. The sad thing is I don't know how to do it and is it legal?
View 10 Replies
View Related
Sep 20, 2011
I have a netgear wireless modem router in an upstairs bedroom/study. My problem is that I can connect my son's windows 7 laptop wirelessly in any of the upstairs rooms with a good download speed (around 8mbps) except for his bedroom in which the download speed suddenly drops to 400-600kbps. I can sit on the landing connecting at 8mbps, then move into his doorway and it drops to around 3mbps and then a couple of feet further into the room and it's only 500kbps.
I've tried turning off all other electrical appliances in his room but it makes no difference. Obviously something is affecting the download speed dramatically but I'm at a loss as to what it can be. The signal strength seems fine.
View 4 Replies
View Related
Aug 25, 2011
recently I have been using my laptop downstairs where the router is in the same room, and now, when I attempt to connect to the network in my bedroom it connects for maybe a few seconds and indicates an average connection and I can also see other available networks before suddenly all connectivity is lost, I can't even see other available networks. Previously I would be able to get strong signal in my bedroom and I was able to use the internet without any fault.I have tested a family member's laptop in my bedroom, and theirs seems to be working just fine in my room. I can only use my laptop downstairs now and I need to know if this is a fault with my laptop's network adapter or if it's a problem with connection between my laptop and the router.
View 2 Replies
View Related
May 6, 2011
I'm staying at a friend's place and can only access the internet when I'm in the same room as the router.When out of the room my computer detects the network at two bars of strength but after a short time denies me access, when I run the network troubleshooter it says that it cannot detect the proxy settings.My friend can connect fine to the network from anywhere in the house and I can connect to my home network and my school network with no problems.Both of us are running Dell Laptops with Windows 7.My card is a Dell Wireless 1510.The router uses WPA2 encryption.why I can't connect?
View 1 Replies
View Related
Jun 12, 2011
I am trying to move one of my PCs to a different room where CTA5 will be impossible to connect, and decided to go with a wireless adapter. My previous wifi experience is limited to built in adapters in laptops (Dell, HP, Asus) and smartphones (HTC, samsung).I use Win 7 64bit and a 2wire gateway (att dsl).None of these devices ever gave me trouble, even when being rooms away (signal quality would drop, but no disconnects).My first try was with a Roseville 150Mbit USB adapter. I let my Windows install the driver, it worked and connected just fine with good speeds. But every so often it would disconnect (resetting my gateway in the process). This has never happened before with any of my other wireless devices, so I replaced the adpter with another. This time it was a TP-link brand adapter. Again I let windows find a driver, everything worked, good speeds, but again I got random disconnects. I than downloaded software from TP-link and installed drivers that way, but nothing changed.The disconnects aren't frequent ( 2-3 in an hour) and are short in duration, but since I will use the machine for online gaming, this will not work.
View 2 Replies
View Related
Jun 8, 2012
Any temperature monitoring unit we can install in our server room that we can use to moniter the room temperature? We had a near catastrophe recently when the air conditioning unit failed to restart following a power outage.
View 3 Replies
View Related
Feb 12, 2012
My laptop only connects wirelessly if it's in the same room (actually, at the same desk) as the router. I just installed a new router and that did not solve the problem. I took the laptop to a pc repair shop and it connected wirelessly there withouto a problem; I also took it to Best Buy and was able to connect wirelessly there as well). So, problem solvers figured it was the router (which was quite old)I've now replaced the router but still can't connect wirelessly unless I'm in the same room as the router!
View 1 Replies
View Related
Dec 31, 2011
I received three things for Christmas: 1. Linksys WiFi E1200, 2. Pandigital Planet tablet, 3. Roku.My family room is on the same level as my Wifi router but about 70 feet apart, but I cannot get a wifi signal in the family room on the Pandigital tablet, however, the Roku seems to be receiving the wifi signal because the Roku works.Is my tablet not working correctly? Can and should my son increase the signal strength of the Linksys
View 5 Replies
View Related
Feb 4, 2011
I have an chat room and have a problem with 2 chatter who keep on flooding my room. I need a good mode to set for me to Bann then life and all my modes I am using its not good and they keep on coming back with their IP or fake ip users
View 2 Replies
View Related
Aug 8, 2012
Three nights ago, around 9:30 P.M PST, my wireless connection to my router began constantly dropping every few seconds/minutes. This happens to all of my wireless devices only while I am in my bedroom, nowhere else. In every other room, my connection is stable.
Connection Issue: Wireless
ISP: Comcast
Router Model: Netgear N300 Wireless Gigabit Router WNR3500U/WNR3500L
[Code].....
View 5 Replies
View Related
Feb 26, 2011
I have 4 story hotel with 40 rooms, 10 rooms in each floor, i want to setup wifi network to cover all the rooms, what should i do or what instruments to use, is it possible to make user based setup for each room.
View 2 Replies
View Related
Oct 9, 2011
I have a canon ipf6350 printer that I want to move to another room in my house. It is currently connected via a network cable connected directly to my wifi router. The printer does not have wifi. how can I connect the printer to the network once it is in another room? I have an older belkin n1 vision wifi router I am not using. Can I connect this wirelessly to the existing network and then plug a cat 5 cable from the belkin to the printer?
View 5 Replies
View Related
Mar 28, 2011
-My landlord has his modem/router connected by a wire that runs downstairs to my desktop computer; and my desktop computer's internet is excellent. -I have a laptop in the other room that is connected wirelessly to my landlord's router with poor internet strength. -I have a spare linksys wireless G broadband router that is not being used.
How can I use this router to increase the signal strength on my laptop in the other room?
View 3 Replies
View Related
May 8, 2012
In one of our projects we have found electrician used 2 pairs (4 wires) cable for network in an elavaor cabin and elavator control room. The cable is almost 120 meters and my question is how we can make a network connection with this cable. There is no way to replace the cable
View 3 Replies
View Related
Sep 29, 2011
If I step outside the office in my house where the router is hardwired to my desktop, I still see there is a strong signal but no device is able to connect to the internet wirelessly. I can connect with my laptop or my iPhone from inside the office.I spent a couple hours and some dollars with the Cisco tech people and all they could tell me is - must be a hardware problem and it's not under warranty.They dialed in remotely so I know the setup is right.This has been going on for months.
View 3 Replies
View Related
May 1, 2012
internet provided to whole building with connections in every room -> personal router in my room -> my PCs, Macs & printer, how to set up my computers so that they can share files with each other and print to my network printer, but without being susceptible to being accessed from other computers in the building? I have my own netgear router. But at the moment, my shared folders are accessible by everyone in the building, so is my printer If I set all the computers to automatically set ip by DHCP, they can access the net, but everyone in the building can access them (and my printer which requires a manual ip doesnt work). If I set all the computers to manual addresses (e.g. 192.168.1.14 ... 192.168.1.15 ... 192.168.1.16 etc.) they work with each other, the printer works, its secure, but I can't access the internet!Is there a way to for example have my own internal network with manual ip addresses, while also being able to connect to the net?
View 1 Replies
View Related
Dec 25, 2011
So my family has an E2000 setup near the modem in a room that litterally is a DEADZONE, signal bearly gets in or out of this room. I've argued until I was blue in the face that we ned to rewire the internets inlet to the house in to another room that isn't a deadzone and rune a router from there.They IT disadvantaged refused. We have also an E2500 they say hook it up, maybe it will work better (when your in a concrete and mettal room with a router sitting on a shelf surrounded by book and with a corless phone system hooks up and sitting on top of it... its jsut not going to work. is there a way i can take the E2500 and make it an access point for the E2000?
I figure if I can I would take the E2500 and put int in a better location and jsut have it relay the E2000 internet. Because of the IT limited thought process of most of the people living here I'd prefer that they share the same SSID or atleast make for a simple transition for the apes I live with.
View 6 Replies
View Related
Jul 19, 2011
I am using TFTPD32 to upgrade the IOS on a router. When I type in the commands copy tftp flash and enter all the necessary information, the router sits for a minute or so and then times out. There is no entry made in the log when it times out. copy flash tftp yields the same result. The fa 0/0 interface and the TFTP server are both on the same subnet and can successfully ping one anothe
View 16 Replies
View Related
Jan 26, 2011
How do I set up the linksys wtr54G wireless router in the dorm room. When I try setting it up, I can only access the router set-up main page which is 192.168.1.1 then icon status shows that it sends out packets, but my computer doesn't receive any signal or (bytes). So, could it be that there are university restrictions on routers/dorm-room internet? How can I get it to work? I heard I need to set up an access point.
View 1 Replies
View Related
