PCs To A Different Room Where CTA5 Will Be Impossible To Connect
Jun 12, 2011
I am trying to move one of my PCs to a different room where CTA5 will be impossible to connect, and decided to go with a wireless adapter. My previous wifi experience is limited to built in adapters in laptops (Dell, HP, Asus) and smartphones (HTC, samsung).I use Win 7 64bit and a 2wire gateway (att dsl).None of these devices ever gave me trouble, even when being rooms away (signal quality would drop, but no disconnects).My first try was with a Roseville 150Mbit USB adapter. I let my Windows install the driver, it worked and connected just fine with good speeds. But every so often it would disconnect (resetting my gateway in the process). This has never happened before with any of my other wireless devices, so I replaced the adpter with another. This time it was a TP-link brand adapter. Again I let windows find a driver, everything worked, good speeds, but again I got random disconnects. I than downloaded software from TP-link and installed drivers that way, but nothing changed.The disconnects aren't frequent ( 2-3 in an hour) and are short in duration, but since I will use the machine for online gaming, this will not work.
View 2 Replies
ADVERTISEMENT
May 6, 2011
I'm staying at a friend's place and can only access the internet when I'm in the same room as the router.When out of the room my computer detects the network at two bars of strength but after a short time denies me access, when I run the network troubleshooter it says that it cannot detect the proxy settings.My friend can connect fine to the network from anywhere in the house and I can connect to my home network and my school network with no problems.Both of us are running Dell Laptops with Windows 7.My card is a Dell Wireless 1510.The router uses WPA2 encryption.why I can't connect?
View 1 Replies
View Related
Feb 12, 2012
My laptop only connects wirelessly if it's in the same room (actually, at the same desk) as the router. I just installed a new router and that did not solve the problem. I took the laptop to a pc repair shop and it connected wirelessly there withouto a problem; I also took it to Best Buy and was able to connect wirelessly there as well). So, problem solvers figured it was the router (which was quite old)I've now replaced the router but still can't connect wirelessly unless I'm in the same room as the router!
View 1 Replies
View Related
Oct 9, 2011
I have a canon ipf6350 printer that I want to move to another room in my house. It is currently connected via a network cable connected directly to my wifi router. The printer does not have wifi. how can I connect the printer to the network once it is in another room? I have an older belkin n1 vision wifi router I am not using. Can I connect this wirelessly to the existing network and then plug a cat 5 cable from the belkin to the printer?
View 5 Replies
View Related
May 16, 2013
Our company own a RV180W router. It works well with firmware 1.0.1.9 but with firmware 1.0.2.6 it is impossible to SSH between our devices. Ping still works though.
View 1 Replies
View Related
Aug 4, 2011
I'm currently configuring an ASA5510.I connected a laptop (IP 192.168.96.18/255.255.255.0) to port 0/2 and tried to ping 192.168.100.2 ... impossible to ping outside interface.I resetted the config of the ASA to retest more simple. [code]
View 1 Replies
View Related
Oct 27, 2011
I want to transfer a few larges files from my mom's laptop to my laptop.
I brought my laptop to her house and connected to the network (her laptop is connected to Comcast through a Linksys WRT54GL router)
I made sure that network discovery, file and printer sharing, and public folder sharing is turned on for both Home/Work and Public Networks on BOTH computers. I then shared her "Downloads" folder with EVERYONE for read and write. I then located her laptop on the Network in Windows Explorer, and tried opening the Downloads folder but it won't let me, says I don't have permission.
What is the deal with this? This would have worked 100% with WinXP.
I then tried disabling Firewalls, rechecked all the settings, and then I even setup a homegroup and joined the homegroup. I saw her computer on the homegroup, double clicked it, saw the Downloads folder, double clicked it - SAME ERROR.
All I want to do is transfer a few files from her laptop to mine, why does Windows7 make this impossible?? I am so frustrated!
I then tried sharing a folder on my laptop and tried accessing it on her computer, SAME problem. What do I do now? I'm ready to uninstall Windows7 and reinstall WindowsXP, this is BS!
View 12 Replies
View Related
Apr 1, 2011
I use an adsl router DSL-320B to connect my Linux server (Fedora 12) to the web.I noticed in my logs that it was renewing its ip about every 30s.
View 1 Replies
View Related
Jul 18, 2011
I have a network with 2 WRT54Gs in it. One in the besement connects to my cable modem and serves as a gateway and DHCP server as well as a wireless access point. That WRT54G is perfectly accessible. I have another in my room set up as a router and access point only, connected by its ethernet port to the gateway. This one proves a bit trickier. Thet network works flawlessly, and if I couldn't see it sitting right there I would doubt it even existed. I can't ping it (I forgot the IP but tried all the ones that seemed logical), it doesn't show up in my network map, etc. From what I gather that's how a switch is supposed to work. But since this is also a managed router, I would think there should still be some way to connect to it to administer it. How can I log in to this router to change settings if I need to?
I'm not sure if maybe 192.168.2.0 is the other router or if that's some kind of special address (My network is on the 192.168.2.* subnet, don't even ask why...). I've seen it in other posts about routing tables but they all had it routing to 0.0.0.0 instead of the router's own IP. I tried pinging 192.168.2.255 and got no responses at all, not from any computers or from either of the routers, so that was not useful. Tracert from my computer to the gateway doesn't show the router (my computer connects to the gateway through the router).
View 4 Replies
View Related
Apr 23, 2013
I would like to setup a VPN to allow employees nomad that connect to our network from outside. Our router is a Cisco SA520 I tried different configurations without success ...Here is the current VPN configuration:I created my users IPSec, I can connect remotely, but I do not have network access ... Unable to access network shares, impossible to ping.
View 1 Replies
View Related
Jan 3, 2012
I am working on Nexus 7010 with NX-OS 5.1.5. I have to delete the static route 10.10.0.0/16 via 10.16.0.21. [code] I try to remove the route with the command "no ip route 10.10.0.0/16 10.16.0.21" and I have the message below % Route not deleted, it does not exist..I don't understand why I have this message because the static route exist.
View 9 Replies
View Related
Dec 5, 2011
So i'm living in an apartment and brought up my pc desktop from home, issue is that the internet cord was not long enough to connect from my room to the modem outsideTheres apparently an internet jack in my room and i have no idea how to set it up to respond to the modem thats currently placed in the living room.
View 1 Replies
View Related
Jan 24, 2013
In 3g tower room there is ceragon fibeair4800, maipu mp801e installed.i want to know how can i use internet using lan cable inside tower room. i have access to the tower room.but there are several ports and equipments inside.
View 2 Replies
View Related
Aug 23, 2011
I have time warner cable as my ISP, and have a netgear wireless modem hooked up to the only computer in house, in my living room, but I would like to have internet access in my room as well (where my rig will be). What do I need to get? I was thinking of getting a wireless network adapter PCI card, but am a bit concerned that I will then have to deal with laggy connections while online gaming.
View 3 Replies
View Related
May 13, 2012
My laptop's internet connection was doing very fine a long time ago. But once time, I went to my brother's room to use it and then i came back to my room and it works very slow until now. I don't know why it happens because the other laptops in my house are doing fine, only my laptop's connection is slow.
View 14 Replies
View Related
May 13, 2012
My laptop's internet connection was doing very fine a long time ago. But once time, I went to my brother's room to use it and then i came back to my room and it works very slow until now.I don't know why it happens because the other laptops in my house are doing fine, only my laptop's connection is slow.My friends suggested that I should change the internet channel. The sad thing is I don't know how to do it and is it legal?
View 10 Replies
View Related
Sep 20, 2011
I have a netgear wireless modem router in an upstairs bedroom/study. My problem is that I can connect my son's windows 7 laptop wirelessly in any of the upstairs rooms with a good download speed (around 8mbps) except for his bedroom in which the download speed suddenly drops to 400-600kbps. I can sit on the landing connecting at 8mbps, then move into his doorway and it drops to around 3mbps and then a couple of feet further into the room and it's only 500kbps.
I've tried turning off all other electrical appliances in his room but it makes no difference. Obviously something is affecting the download speed dramatically but I'm at a loss as to what it can be. The signal strength seems fine.
View 4 Replies
View Related
Aug 25, 2011
recently I have been using my laptop downstairs where the router is in the same room, and now, when I attempt to connect to the network in my bedroom it connects for maybe a few seconds and indicates an average connection and I can also see other available networks before suddenly all connectivity is lost, I can't even see other available networks. Previously I would be able to get strong signal in my bedroom and I was able to use the internet without any fault.I have tested a family member's laptop in my bedroom, and theirs seems to be working just fine in my room. I can only use my laptop downstairs now and I need to know if this is a fault with my laptop's network adapter or if it's a problem with connection between my laptop and the router.
View 2 Replies
View Related
Jan 23, 2011
I have a DIR-615 D4 (Original firmware V1.00VG), I tried to install DD-WRT using all the guides online and here, but no matter what i do, the router does not seem to successfully complete the flash?
- successfully entered emergency room
- uploaded the bin file
- power light turns off (but link to machine light still on)
- left it for a good 10 mins to be sure, and still no life out of it
- power cycled and router goes back to emergency room
So i then tried to revert back to the V1.00VG;
- uploaded bin file
- power light stops flashing and stays on solidly (link to machine still green)
- left it for a good 10 mins to be sure, and still no life out of it
- power cycled and router goes back to emergency room
View 4 Replies
View Related
Mar 16, 2012
My question has to do with the low signal strength of my dir-655. I have it set up in the second bedroom of my apartment. When I am sitting in my living room (about 30 feet away) it's really hard to pull in a signal of more than one bar on my phone, or two bars on my wife's kindle fire and will often drop the signal all together. But, if I search for networks, tons of other routers come up with excellent signal strength from our neighbors. Is there something I need to know about expanding the signal strength?
View 3 Replies
View Related
Jun 8, 2012
Any temperature monitoring unit we can install in our server room that we can use to moniter the room temperature? We had a near catastrophe recently when the air conditioning unit failed to restart following a power outage.
View 3 Replies
View Related
Dec 31, 2011
I received three things for Christmas: 1. Linksys WiFi E1200, 2. Pandigital Planet tablet, 3. Roku.My family room is on the same level as my Wifi router but about 70 feet apart, but I cannot get a wifi signal in the family room on the Pandigital tablet, however, the Roku seems to be receiving the wifi signal because the Roku works.Is my tablet not working correctly? Can and should my son increase the signal strength of the Linksys
View 5 Replies
View Related
Feb 4, 2011
I have an chat room and have a problem with 2 chatter who keep on flooding my room. I need a good mode to set for me to Bann then life and all my modes I am using its not good and they keep on coming back with their IP or fake ip users
View 2 Replies
View Related
Aug 8, 2012
Three nights ago, around 9:30 P.M PST, my wireless connection to my router began constantly dropping every few seconds/minutes. This happens to all of my wireless devices only while I am in my bedroom, nowhere else. In every other room, my connection is stable.
Connection Issue: Wireless
ISP: Comcast
Router Model: Netgear N300 Wireless Gigabit Router WNR3500U/WNR3500L
[Code].....
View 5 Replies
View Related
Feb 26, 2011
I have 4 story hotel with 40 rooms, 10 rooms in each floor, i want to setup wifi network to cover all the rooms, what should i do or what instruments to use, is it possible to make user based setup for each room.
View 2 Replies
View Related
Mar 28, 2011
-My landlord has his modem/router connected by a wire that runs downstairs to my desktop computer; and my desktop computer's internet is excellent. -I have a laptop in the other room that is connected wirelessly to my landlord's router with poor internet strength. -I have a spare linksys wireless G broadband router that is not being used.
How can I use this router to increase the signal strength on my laptop in the other room?
View 3 Replies
View Related
May 8, 2012
In one of our projects we have found electrician used 2 pairs (4 wires) cable for network in an elavaor cabin and elavator control room. The cable is almost 120 meters and my question is how we can make a network connection with this cable. There is no way to replace the cable
View 3 Replies
View Related
Sep 29, 2011
If I step outside the office in my house where the router is hardwired to my desktop, I still see there is a strong signal but no device is able to connect to the internet wirelessly. I can connect with my laptop or my iPhone from inside the office.I spent a couple hours and some dollars with the Cisco tech people and all they could tell me is - must be a hardware problem and it's not under warranty.They dialed in remotely so I know the setup is right.This has been going on for months.
View 3 Replies
View Related
May 1, 2012
internet provided to whole building with connections in every room -> personal router in my room -> my PCs, Macs & printer, how to set up my computers so that they can share files with each other and print to my network printer, but without being susceptible to being accessed from other computers in the building? I have my own netgear router. But at the moment, my shared folders are accessible by everyone in the building, so is my printer If I set all the computers to automatically set ip by DHCP, they can access the net, but everyone in the building can access them (and my printer which requires a manual ip doesnt work). If I set all the computers to manual addresses (e.g. 192.168.1.14 ... 192.168.1.15 ... 192.168.1.16 etc.) they work with each other, the printer works, its secure, but I can't access the internet!Is there a way to for example have my own internal network with manual ip addresses, while also being able to connect to the net?
View 1 Replies
View Related
Dec 25, 2011
So my family has an E2000 setup near the modem in a room that litterally is a DEADZONE, signal bearly gets in or out of this room. I've argued until I was blue in the face that we ned to rewire the internets inlet to the house in to another room that isn't a deadzone and rune a router from there.They IT disadvantaged refused. We have also an E2500 they say hook it up, maybe it will work better (when your in a concrete and mettal room with a router sitting on a shelf surrounded by book and with a corless phone system hooks up and sitting on top of it... its jsut not going to work. is there a way i can take the E2500 and make it an access point for the E2000?
I figure if I can I would take the E2500 and put int in a better location and jsut have it relay the E2000 internet. Because of the IT limited thought process of most of the people living here I'd prefer that they share the same SSID or atleast make for a simple transition for the apes I live with.
View 6 Replies
View Related
Jan 26, 2011
How do I set up the linksys wtr54G wireless router in the dorm room. When I try setting it up, I can only access the router set-up main page which is 192.168.1.1 then icon status shows that it sends out packets, but my computer doesn't receive any signal or (bytes). So, could it be that there are university restrictions on routers/dorm-room internet? How can I get it to work? I heard I need to set up an access point.
View 1 Replies
View Related
Feb 11, 2013
-Region : UnitedKingdom
-Model : TL-WR841N
-Hardware Version : V8
-Firmware Version : 3.13.18 Build 120522 Rel.31564n
-ISP : Virgin
I bought a TL-WR841N to use instead of our Virgin Super-hub which dropped the wifi regularly. It took me a while but I stumbled with the set up and got it working.Super-hub (in modem mode) - cable - TL-WR841N - 2 x cables running to 2 switches for (TV, Sky+, WII) and (PC, X-Box). Everything is spot on apart from the other half's Iphone and Ipad. Neither of them can get on the web in the bedroom. Both apples will join the network, but none will be able to get onto the web. The Wifi bars are on display on both products but they just keep spinning and searching to get on the web. I bought a Huawei repeater plug hoping that would work, but it just slows down everything else that can get on the network.Remembering that this happens only in one room, is there something that I can alter that would let these 2 apples access the web besides walking out on the landing every time she needs to update a web page ?
View 5 Replies
View Related
Nov 23, 2011
At home, I have two desktops (bedroom and living room), a bedroom printer, and a WRT120N router. The bedroom desktop is connected to the WRT120N route and the printer is connected to the bedroom desktop. The living room desktop is connected to the WRT120N route. I can print from the bedroom desktop, but cannot figure out how to print from the living room desktop.
How can I print on the bedroom printer from the living room desktop?
View 5 Replies
View Related
