D-Link DWL G-550 Upgraded To Windows 7 Internet Is Now Slow
Aug 22, 2012
I upgraded from Vista 64 bit to Win 7 64bit and one of the first things I've noticed was that youtube videos take forever to load, I use to stream on 720p videos in realtime but now even 360p can struggle to load, 480p videos you have to pause for 30 seconds. Oddly, speedtest indicate my full 15mbps down and 1mbps up, regular downloads go fast but streaming youtube, vimeo, or anykind of videos take a while.
My initial guess was that it has something to do with the Wi-fi PCI card. I have D-Link dwl G-550 and on windows compatibility center it says its not supported. Windows 7 automatically detected and installed its own drivers, it works ok.
View 19 Replies
ADVERTISEMENT
Dec 15, 2012
Ever since I upgraded my PC to Windows 8 the internet has been SLOW... It works fine still on my tablets and PS3. Looking online they seem to say I need new drivers? Not sure what to do.
View 2 Replies
View Related
Oct 6, 2011
I have the exact same problem: network adapter disconnects itself and I am unable to disable and enable it again, because it is unresponsive under the device manager and the network and sharing center. The only solution is to reboot the computer, where I can then have access to the network adapter and can reset it.This is since I upgraded windows vista to windows 7 4 days ago. I have upgraded all the driversI have uninstalled the network adapter driver and rebooted, and reinstalled the latest update with no difference.Running the computer in safe mode with networking has not yielded a crash so far, but have not tested this enough.I have tried disabling IPV6 as some people have said this could be reason, but it still crashes.It is somewhat different from what many people mention as I cannot reset the connection without rebooting (which I could live with). I do not use torrents or any site like that.
View 1 Replies
View Related
Nov 1, 2012
I recently upgraded to Windows 8 with my XPS 16. I know the Intel R 5150 is not working right with Windows 8 just like everyone else I've seen post on various sites when they upgraded. My concern is.. when is there gonna be an updated driver!? You would think if Windows was gonna make it available to upgrade your OS to 8 that they would have all this straitened out. Now I have to get rid of 8 just so I can have WiFi!
View 8 Replies
View Related
Apr 9, 2012
I recently upgraded a relatives Dell Inspiron 1545 laptop from Windows Vista Home Premium 32bit! To Windows 7 Enterprise 64bit. Previously this was connected wireless to a netgear router. On upgrading the OS i have found that the previous network is no longer showing up in the list of avalible networks even though a number of other devices can still connect and see the broacast of the SSID. As other networks are showing up and the laptop can succesfully connect to others I dont see this as being a driver issue. I have checked the router configuration for broadcast of SSID and MAC filtering. My next step will be to connect the router and laptop via ethernet.
View 5 Replies
View Related
Mar 24, 2011
Router:Dir-655 (Hardware Ver B1;Firmware Ver 2.01Na)
Modem: Motrola SB6120
Cables: Cat 6
Machines: 1. XP SP3 w/d-link DGE-530T desktop; 2. XP Pro SP3 w/dlink DGE-530T desktop; 3. Win7 64 (Latest Drivers)
Problem is that the XP machines can download 25Mbsp on speedtest.net but the Win 7 only manages 5Mbps through dir-655 -- ALL WIRED CONNECTS!. Connect Win 7 directly to modem and d/l is 30Mbps 2 hour Netflex test of wireless indicates good performance. D-Link support had me going in circles for a while until I finally suggested that a firmware update was in order. They assured me that this had been id'd as a problem and that latest firmwire would certainly solve it. It did not.
View 14 Replies
View Related
Jul 26, 2012
I decided to upgrade my OS from Win 7 Pro 32 bit to Ultimate 64 bit because i needed more RAM ( I have 4 GB RAM but only 3.5 of it was usable. I want all of the 4 GB because I am getting BF3 soon) and for my new graphics card (GTX 550ti) so i formatted my Hard Drive after backing everything up on an external Hard Drive. Everything went smoothly until I had to browse the internet. Internet works, but it is very slow. It was working as normal when I had the 32 bit OS. Download Speeds are 8 kbps. I tried using the netsh int tcp set global autotuning=disabled in command prompt but no result. I tried removing and Re-inserting my Wi-fi adapter, no result. I don't want to be forced to downgrade to a 32 bit OS again . I am at a loss here and really want my fast internet back. [code] My Internet Connection is 4MB. My router is a Linksys Wireless-N Router and the Modem is provided by my ISP. The signal strength from the position of my PC is decent but internet is VERY SLOW!
View 3 Replies
View Related
Nov 29, 2011
I previously owned a Linksys WRT54G V.8 wireless router, I upgraded my router to a DLink DIR-655 N Router in hopes to improve my internet download speeds. As a comparison I ran several online speed test for both routers. However, All test yielded similar results with minimal improvements. I also downloaded large files utilizing rapidshare's download manager, again with no improvement in download speed. I thought moving from a G to an N router would improve my download speeds. The drivers on the DLink router are current. Are there any tweaks or tricks i can do to increase my download speeds?
View 7 Replies
View Related
Jul 23, 2012
I've got 45mbps internet speed with Windows XP and 0.8 with Windows 7..
View 6 Replies
View Related
Apr 27, 2011
I recently reinstalled Windows 7 because i had a really bad virus that grew and took over my computer.since I have reinstalled windows my internet connection is a wireless netgear WG111v3.The signal is strong but the transmit/receive performance is practically nothing so I cant even download flashplayer etc it just gets timed out.It also takes forever to open a site.before the virus/reinstalling my speed was excellent so I dont know why its changed now.
View 4 Replies
View Related
Dec 27, 2011
I upgraded my router from version 1.2 to 1.35NA, through the Tools / Systems page on the router (uploaded the bin file). I am connected to the router via a wired connection.
During the upgrade, the message said I wouldn't be able to access the webpage until 75 secs. I watched it count down the seconds and then when it refreshed, I could not get to my routers page: 192.168.1.2
The DLink Router is connected as a pass through router to my FIOS router, so that I can use the wired ports and I use the DLink as my wireless router (fios router wireless strength was poor).
All the lights on the router are working as though everything is ok. I am still connected to the Internet, so it appears that the pass through of my wired ports is still working after the firmware upgrade, but wireless is not. Not surprising. I expect I may have to upload my settings (which I did save), but since I cannot get to the routers page, I feel a bit stuck.
two more bits of into. I also tried getting to 192.168.0.1, which might be the default? and I cannot get there either. My Fios router is on 192.168.1.1 (and as mentioned, the DLink should be at 192.168.1.2). Fios Router reports that the 192.168.1.2 port is inactive.
View 5 Replies
View Related
Jun 21, 2012
I am today playing with the settings in my DIR-655 NA B1 router when I notice that a firmware upgrade is available.I clicked the button and the router automatically downloaded the file named DIR655B1_FW207NAB09.bin. I flashed it and was saying that it needed to wait 180 seconds (3 minutes) to reprogram the router after which it came up with a 404 not found on the screen. I am not able to access my router, it is bricked and I can't even re-flash the firmware comes back with Incorrect hardware ID image, Please check. I notice that the 2.07NA firmware file on the website is named DIR655B1_FW207NAB05.bin. What gives this is the first time a firmware upgrade has bricked anything I own?
View 14 Replies
View Related
Oct 24, 2011
recently I have been getting slow internet and download speeds at a later time in the day, when there is 3 or 2 internet connections that show up in my connections. one being mine virgin broadband, another sky and Bthomehub, whenever these connections are up my download speed on steam goes from 1.1mb/s to 250kb/s and i get the message from windows saying' 'windows has detected ip conflict'' I can still access the internet play games online fine, but my download speed is really slow and sometimes internet is slow aswell
View 7 Replies
View Related
Nov 3, 2012
Have had my XPS One 27 for a few days and the 1703 wireless card has cut my download speeds more than half. Whereas I was getting anywhere from 75 to 80 Mbps on my previous machine with a b/g/n/ wireless card, I am now only able to get 25 to 30 Mbps on this new machine. Nothing has changed on my router, I just plugged in the XPS One 27 and it automatically found the router and I logged in without a problem. The router is the WNDR 3700. I am on a 105Mbps tier and need my download speed restored to what I used to get. Is there a "tweak" or is there a better wi-fi card I can install?
View 5 Replies
View Related
Nov 2, 2012
I have a Vostro 3300, which was working very well, and when I upgraded my OS from Win7 to Win8 my internet speed through wireless connection became very low, I checked for a driver update but did not find any that is compatible with windows 8. I also tried some old Windows 7 drivers with and without "compatibility Mode" but still not working. I should also mention that when I connect to the internet through Ethernet, I get the full speed.
View 3 Replies
View Related
Nov 3, 2011
I have a dell studio 1557 running windows 7. I live in my own apartment with roommates in college, and i've been having some very bad issues with slow internet or constant down time. Here are some key points:
- I have Charter internet.
- My 2 other roommates have NO ISSUES.
- My laptop works in my family's house. They have Comcast. I went on vacation a week ago and there were no issues on the hotel internet. No issues from the school's internet.
- I have been using my android phone as a tether because the internet is more stable. It's slow, but consistent for the most part. This is extra frustrating because I shouldnt have slow internet. And I sure as hell shouldnt be paying for internet I can't even enjoy.
- Charter has replaced 2 routers. Both are brand new. They are net gear. Charter is clueless to my problem.
- I have reinstalled windows. Dell told me to try safe mode. I noticed NO ISSUES WITH STANDARD BROWSING IN SAFE MODE. This leads me to believe it is a software issue.
- The connection is non-existent when coming out of hibernation or rebooting. In the morning, i have to boot up, make my coffee, and only then will it give me access to the internet. Otherwise, page timeouts. It can take up to 10 minutes for the internet to work.
- Youtube and general multitasking is very bad. Slower connection than ever, page timeouts, and I often need to wait for a video/music to buffer before I begin enjoying it.
My laptop has been this way for upwards of 6 months.
View 7 Replies
View Related
Jun 22, 2011
So just recently my Internet has been running a lot slower than normal at different times of the day (completely random, could be fine for hours then just turns slow). I know it's not the Internet itself, since it's only happening on my computer, and none others in the house - and I'm far from capped. I've run AVG, Spybot & Malwarebytes' scans and have found no infections of any kind. I've run TCP Optimizer and used the "reset to windows default settings" feature, which also hasn't worked one bit. I've tried different Ethernet cables and different plugs in the modem and no improvement.
View 8 Replies
View Related
May 7, 2012
I can't win. After dealing with the internet dropping once every two weeks, I decided that upgrading the firmware might work. Turns it all it did was exacerbate the problem and now my internet drops every few minutes. I've been plugged into my modem for a good 20 minutes at this point with no drops. Has my router just shit the bed or can this be fixed?
View 8 Replies
View Related
Mar 8, 2011
I have a Cisco 871w that has been a very great product for many years. I recently switched to Windows 7 x64 on my main machine and now i am having all sorts of issues with it.. I have done a bit of research and found that it appears that it might be the firewall on the SDM that is causing the slowness issues. what does happen is that downloads from known good sites will run really slow. If i hook up my Macbook Pro or my Windows XP laptop i have no issues at all. i have tried Disabling IPv6 as well as SMB2.0 and this has not resulted in a fix at this point.
View 4 Replies
View Related
Nov 8, 2011
Yesterday, my linksys router broke down suddenly. I went to the store and bought a new one, a d-link DIR-615. After plugging it in and setting it up, i tried loading web pages and it worked ok. It wasn't as fast as my linksys router but it was fine. When i tried loading youtube videos, that wasn't the same story. The videos didn't load. It started playing but then stopped after a couple of seconds. When i connected my computer directly to the modem, the videos loaded fast. There seems to be something wrong with the video streaming.
View 9 Replies
View Related
Apr 20, 2013
Just replaced my old di-524 with dir- 815 and now i have very slow internet ,LAN and wireless,if i hook the di-524 back up internet is back to normal was
going for faster internet and more wireless range.
View 11 Replies
View Related
Mar 11, 2012
2 routers (only one in use at a time!):
(A) Linksys BEFSR41 v3.1 Etherfast Cable/DSL Router w/ 4-Port Switch
(B) Linksys WRT54GL v1.1 Wireless-G Broadband Router w/ 4-Port Switch
Both routers are set to provide DHCP.DSL modem: Verizon Westell Wirespeed B90-210015-04 I have no idea whether this modem is also a router, but everything used to work. OS: Windows 7 Professional N x64, SP1 My computer has two ethernet ports, but only one is in use at a time. I also have VMWare Workstation installed, so there are a couple virtual adapters in the mix, but VMWare is not running during any of these tests.Yesterday (Sat, 10-Mar-2012) I replaced my old router (A) with the new one (B). The A router has been working fine for many years; I just needed wireless access. After the initial setup, the B router worked fine, using hard lines connected to the switch ports, and the wireless access features (laptop and Android phone) - for about a day. It suddenly dropped the internet connection early this afternoon, Sun, 11-Mar-2012, ~1220hrs PDT. I heard it go out because I was streaming NPR at the time.Using the B router, my desktop computer (connected via a wire) can still talk to my laptop (wireless), but neither of them can see the internet.When I swap back to the A router (wires only), it now has no internet connection either! But the desktop and the laptop (both wired) can still see each other via the (wired) router.When I remove the router from the network and connect the DSL modem directly to my desktop computer, I have internet access; it works fine! But not if a router is in the circuit.
(1) Router B seems to work because my wired desktop and my wireless laptop can communicate locally.
(2) Router A still works because my desktop and laptop can communicate with each other using a wired network hosted by the A router.
(3) The DSL modem seems to work because my desktop has internet access when connected directly to the modem.
(4) Neither of the routers can communicate with the internet through the DSL modem.
I spent an hour in a chat with Verizon tech support. I've power-cycled everything. I've reset both routers to default specs and reconfigured them. I've reset the DSL modem via its button. I've used different cables. It appears that neither of the routers can successfully communicate through the DSL modem to the internet. But they both used to. Why would it just suddenly stop connecting through the modem?
Scenarios:
computer <-> DSL modem <-> internet | works!
computer <-> either router <-> DSL modem <X> internet | NoGo
desktop <-> either router <-> laptop | ping OK
ipconfig /all results when connected directly to the DSL modem (internet connected):
Windows IP Configuration
Host Name . . . . . . . . . . . . : Serenity7
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
View 5 Replies
View Related
Jun 10, 2011
I have been using my DIR-655 for about 2 weeks now with Road Runner wideband services. Starting yesterday my internet became very slow and I discovered the cause was the router. I tried resetting it to factory settings and things will be fine and run smoothly for about 5-15 minutes but after that it goes back to being extremely slow. My speed tests would go from 10ms (normal) to 250-450ms. Before this issue occurred the Dlink was perfect, had full speeds. I am running a wire Ethernet connection.
I am currently using revB and tried upgrading firmware to 2.01NA which had no effect, but make my internet seemingly go back to normal for the first few minutes then nosedive again.I have also changed my speed/duplex settings in Network Config to 1gbs Full Duplex. I've also disabled QoS, and still no change. Not sure what else to do.
When directly connected to the modem everything seems fine. The modem is also the provided Motorola SBG6580 which I have called Time Warner to set the modem into bridge mode and have the DIR-655 connected to it.
With DIR-655 connected to PC
With Modem connected to PC
View 5 Replies
View Related
Feb 27, 2012
Okay i just got the DIR-615 N Router and at first i was getting 40 ping on speedtest.net but now I'm getting 360 ping which is really frustrating since i upgraded because my old one was having troubles and also when i get to the check connection in the setup i am getting Your new router does not appear to be connected properly.
View 3 Replies
View Related
Nov 13, 2012
Recently I have noticed my internet get slow. I use a comcast cable internet connection that is directly connected to my dlink DR 655. I use the megapath internet speed test [URL] when testing my internet speed. Have a laptop that is usually on wireless and an XP workstation that is connected to the 655 directly with static IP.
I would be browsing the internet and all the sudden the internet would get really slow. This would happen on both my desktop and the laptop and my speed test on both machines would be around .3 Mbps. When this happens I would go and connect the laptop with the ethernet pot directly to the modem. Of course a reboot of the modem has to occur before a connection can be made so once I do that all the sudden my internet is back up to par (12 Mbps). I go ahead and put my network back to the way it was and it all goes back up to 12 Mbps. I have called comcast several times and they are telling me it my router.
This picture shows a snapshot of some windows from the laptop. The CMD ipconfig on the bottom left shows the laptop network settings when connected directly to the modem. The CMD ipconfig on the upper left is the network settings when connected to the router. The web page on the right shows the WAN network settings when the 655 is connected to the cable modem.
Notice the DNS servers, they are different when the 655 is connected to the modem versus when the laptop is connected to the modem. Could this be part of my problem? I have not seen were I can manually change 655 DNS entries ... is there a way to do this? Or should I not even be worried about it?
View 3 Replies
View Related
May 11, 2011
This only started about a week ago and everything was working fine before then. My router is causing my internet to be slow (I know this because it goes at normal speed when I am connected directly to my modem)
View 1 Replies
View Related
Mar 1, 2010
I'm currently subscribed to Comcast's 22/5 Internet service. Internet upload speeds on both wired and wireless are about the same at ~ 5 Mbps. Wireless download speeds range from .5-3 Mbps. Wired or Wireless, I receive LAN speeds of ~32 Mbps or 3-4 MB/s. The noticeable issue is wireless internet download speed. I have tried every configuration possible with my router, updated drivers on devices, firmware and tested everything I could on all PCs, and even used the XBOX 360's media extender network tuning feature as a tool in my investigation to find this bottleneck. All reports point to internet download speed. Again, general LAN and internet upload speeds relatively meet expectations. The wired download speeds are slow at times, but consistently meet expectations.
My current Setup:
Wifi
A4 1.33NA
WPA2 Only - Personal
802.11 Mode : 802.11n only
Channel Width : 40MHz
Channel : 1
[code].....
View 6 Replies
View Related
Jan 3, 2012
I`m new here I recently purchased the dir-615. I started configuring with cd but i couldn`t get past the step where it should verify if cables are plugged in , so I did it manually. Some pages won`t load , internet speed is slow ( Both wireless and lan speed ) . I am using a PPPOE connection , I even got my ISP to check my settings, and he said it was alright but it reduces my speed by a lot. Usually I download with 1 MB/s with the router on wi-fi I hardly get 50 kb/s and on lan max is 100 kb/s.
View 1 Replies
View Related
Mar 22, 2012
I have recently bought a TP Link wireless usb adapter (TL-WN727N). Initially I had some issues with drivers but solved that and my internet was working perfectly for around 2 days. However recently the internet speed has dropped down to extremely low speed periodically for no apparent reason. I can be downloading something at around 700kBps one moment then only have 100B/s the next. [CODE]
View 3 Replies
View Related
Jan 16, 2013
Region : Brazil
Model : TL-WR841ND
Hardware Version : V7
Firmware Version : 3.13.9 (Last)
ISP : NET Virtua
I've bought a TL-WD841ND and was using it normally.
After I arrived from a trip, the internet speed by wireless and by cable is only 0,5~0,7 Mbps...
My internet connection is 10 Mbps, and if I plug direct on the modem, there comes the real speed (9,7 Mbps), but connecting by the router, the speed is 1/20 of what should be. Before my travel i was using it normal, and no one has changed any configuration.
So i've updated to the last firmware avaliable on the website. So i've rebooted it and the "configuration" LED keeps flashing...
I would like to know if this led flashing is normal: (here is a video that i've done: [URL] and what could be happening. ps: connecting by cable, the internet speed is also the same (even after the factory settings reset)...
View 1 Replies
View Related
Apr 14, 2013
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
Region : Netherlands
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel.54965n
ISP : Ziggo
I currently have a issue with my TP-link WR941N.When I first connected the router I had a good internet speeds of about 70 mbps. My max provided by the ISP is 120Mbps but 70 was acceptable for me. Recently however the connection is terrible. I regularly have a speeds of 6Mbps via the router, When i directly to the modem via kabel I get a speed of 120Mbps. Therefore I ruled out that the connectivity problem is due to my ISP.
View 1 Replies
View Related
Sep 18, 2012
I have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.
I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.
Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02
[Code]......
View 2 Replies
View Related
Mar 29, 2013
I have a DIR-655 B1 with FW 2.05.I have different computers/phones connected to internet via the router, both via wifi and ethernet. I have Linux/Windows 7/Android and iOS units. Two weeks ago one of my Windows 7 laptops did not connect to internet and I thought it was the computer. I did a lot of troubleshooting the computer, still did not work at home. When I brought the laptop to a friend it work directly. Now I started to think that it was the router that was the problem. On the status page I can see that the machine got an IP address in the "LAN Computers" part. I can confirm in the laptop that it received the same IP address via DHCP.
I have look around in the menus but can not find anything that should make this computer not connect. I can not even login to the router via this computer.
View 7 Replies
View Related
