D-link 2520u DSL Router Does Not Ping Some Sites
Apr 2, 2011I'm using D-link 2520u Dsl modem,...my router does not ping some sites,?
View 10 Replies
ADVERTISEMENT
Has IP - Cannot Ping / Connect To Sites
Feb 17, 2013I have a laptop that works perfectly fine when plugged into a network cable, but the wifi refuses to work. It pulls an ip, and everything looks good when I run ipconfig/all, but it can't even ping the router. All other computers on the network are working fine. I've flushed dns, set static IP and DNS, uninstalled/reinstall device, updated drivers, bios, and firmware, and even created a backup image of the computer and reloaded the os using the recovery partition. The event log doesn't tell me anything, and there are no flags in the device manager. I'm at a complete and total loss. I cannot figure this one out.The laptop is a Compaq Presario CQ50-142US. Vista 32bit OS. Everything was working perfectly fine before it got a virus. I ran through the standard procedures of AVG, Malwarebytes, TDSSKiller, and even resorted to Combofix, but somewhere along the line the wifi dropped off and will not come back.I even double checked the HOSTS file and IE proxy settings to ensure I wasn't crazy; although I know those should've affected the wired connect too.My last step is to either replace the wifi chip (which I don't think is the problem), or wipe it and load the os from scratch, but I don't have an oem disc since it has the recovery partition.
View 14 Replies View RelatedIE / Firefox Not Connecting But Can Ping Sites
Jul 14, 2011I have a Windows7 laptop that was working fine til yesterday.I switched it on at home last night and it picked up my wireless connection but when I opened IE or Firefox it would not access any webpage (blank screen, no address that its resolving on status bar at the bottom and just a progress bar (IE) or a 'searching' icon (firefox)The network connection page in control panel says that it is connected and I can ping sites from the command prompt and some other software such as skype seems to be connecting.I have disable both bullguard firewall and made sure the windows firewall is off.I have come into work this morning and am getting the same problems, even when connected by ethernet cable, I can also see other computers on the network.I was occasionally getting a dial up connection pop up box appearing from an old dial-up connection I had set up, but have now deleted this connection.
View 2 Replies View RelatedIE / Firefox Not Connecting But Can Ping Sites?
Jul 14, 2011I have a Windows7 laptop that was working fine til yesterday. I switched it on at home last night and it picked up my wireless connection but when I opened IE or Firefox it would not access any webpage (blank screen, no address that its resolving on status bar at the bottom and just a progress bar (IE) or a 'searching' icon (firefox) The network connection page in control panel says that it is connected and I can ping sites from the command prompt and some other software such as skype seems to be connecting. I have disable both bullguard firewall and made sure the windows firewall is off.
I have come into work this morning and am getting the same problems, even when connected by ethernet cable, I can also see other computers on the network.
I was occasionally getting a dial up connection pop up box appearing from an old dial-up connection I had set up, but have now deleted this connection.
Cisco WAN :: T1 1700 Cannot Ping From Sites
Dec 19, 2010I have two sites with a dedicated, point to point, LAN, site 1 has a Cisco 1700, LAN IP: 192.168.0.101; Site 2 has a Cisco 1800, LAN IP: 192.168.1.101.From site 2 I can ping the router on the other side: 192.168.0.101, but nothing else on that network
From Site 1 I can't ping the other network at all,Both sites ping fine to their respective local interfaces. I also noticed, when trying to ping site 2 from 1, the "WIC ACT/CH" light blinks, otherwise it's off.
Site 1 has it's own web connection through COMCAST, site 2 is set to route through site's 1 connection to go out. The only thing the routers are doing are the actual connection between sites, and in the case of site 2, routing web traffic to 192.168.0.100, which is a Sonicwall on Site 1.
This was all working just fine, for a long time, up until yesterday, when the problem I described started happening.
10 To 90 Percent Of Internet Connectivity Down - Cannot Ping Sites?
Sep 12, 2011I have ATT DSL and pretty much every night, I lose a large portion of the Internet. I cannot ping these sites, while the rest of the net works fine. The other night, I could not ping major domains like ATT, CNN, MSNBC, BBC (a chronic missing domain). On the other hand, I could get Yahoo fine and go to a streaming audio site and run music perfectly...but about 90% of the Internet was unreachable. Could not load their sites nor ping them in command line. The other 10% worked flawlessly.
View 12 Replies View RelatedUnable To View Websites - Able To Ping Sites
Dec 22, 2012I have been accessing my webmail account everyday for the past 3yrs with not problem until this week. Stopped working mid week. No changes to computers. Have 3 and none will access this site any longer. Just times out. Sometimes I can ping and other times not. Can log onto other networks and access with out any problems. My ISP says it is not their problem. (Site is [URL]).
View 1 Replies View RelatedDSL-2520u - Stop Configuration Page From Appearing On WAN / Accessible Only From LAN
May 9, 2012I have a D-Link DSL-2520u ADSL2+ modem. When I access the page 192.168.1.1, it prompts for a username and password. Upon successful authentication, I see the modem configuration page.
If I am on a different network, I can also access the modems configuration via its public IP address.How can I restrict access to the configuration page via the public IP address and only allow access via the internal IP address?
D-Link DIR-655 :: Router Blocking University Sites
Jan 13, 2012So I can't seem to access ANY site related to my university (www.concordia.ca) anymore from my home network. I've tried to visit URL or any of its' sister sites from my desktop, my laptop, my iTouch, even my ps3, I've also tried cross-browsing to no avail. I've checked the router page, apparently my Hardware Version is B1 and my Firmware Version is 2.00NA. Access Control is unchecked and there are no sites at all listed under Website Filter. I've also tried resetting using the reset-hole and also by pulling off the power chord. Also did a factory-reset from the router page, the problem persists despite all of that.Every other site works just fine, it's just my university site that refuses to load up. I've browsed the last 7-8 pages of this forum, this doesn't seem to be a common problem based on that little sample. So what gives exactly? I used to be able to visit those sites just fine prior to few days ago.
View 8 Replies View RelatedTP Link 1043 ND Router Blocks Facebook And Other Sites?
Oct 23, 2012I have fiber optic net, going into a TP Link 1043 ND router out in my garage.All of the 4 lan ports go into one of the rooms in the house. I also have two more routers of the same kind, one downstairs and one upstairs.They are configured in a way, that DHCP server is only turned on, on the one in the garage, the other two act as switches.My problem is that 50 % of the time I can't acces facebook, and some other random sites.The interesting bit is that when I chat with someone on FB, I can see what they write, but my message doesn't go through.The way it goes, is that I can browse on facebook for like 5 minutes, after that its unavailable for another 5 minutes.I can still access the site from my smartphone, but only if its not connected to the wifi network, meaning the problem is somewhere within my setup.I've already tried turning the router firewall off, but that doesn't make any difference.
View 1 Replies View RelatedCisco Wireless :: 3602 AP Unable To Ping Anything At Branch And Central Sites
Mar 7, 2012We are in the process of evaluating Cisco wireless controllers and AP. We have 3602 APs and 2504 controllers right now. We have multiple branch offices connected to the main office through layer 3 and they all have different vtp domains and vlans. I am trying to deploy APs at the branch offices and connect them back to the controller and the central site. I created a sub interface and ssid with one of the vlans at the branch office on the controller and was able to get the AP to join the controller through DNS. However, a client at the branch office connected to the AP was unable to ping anything at the branch and central sites. Any documentations on how to deploy such a setup where the controller is at the central site and AP at the branch office going through multiple routers in between?
View 1 Replies View RelatedSome Sites Won't Load When Adsl Modem Tp-link Td 8840 Is Connected To Router Dlink Dir 61
Apr 30, 2011i have a adsl modem tp link td 8840, and i had this up and running well for about 3 days. then we decided to get a router cause my little sis got a ipad2.the router is dlink dir 61.so basically i followed all the instructions and the internet was working fine.then for some reason ign site stopped working, i thought that it was down for some reason and didn't think much of it and today when i tryed to go into hotmail or facebook it doesn't work either. so i can get into the log in pages of both, but when i put in the id and password, the screen goes blank and just says waiting for .... on the bottom (using google chrome).and it never loads.i tryed with other internet browsers and it din't work so i took out the router and re wired the adsl modem only and voila. all the sites started working again.i want to use my router but i don't know why i can't acess some sites when i have it connected.
View 1 Replies View RelatedD-Link DIR-655 :: Can't Get To Certain Sites
Mar 13, 2012I followed the instructions in the manual for checking and changing the MTU on the router. It didn't have any effect. When I take the router out of the system and go directly to the modem, I can get the sites.
View 7 Replies View RelatedD-Link DIR-601 :: Getting Ping Timeout While Using This Router?
May 25, 2011Getting ping timeout while using this router? (know that it IS the router tested with other routers)
View 7 Replies View RelatedVLAN Link Between Two Sites
Nov 18, 2011I have two sites linked by fibre a few miles apart, site A is on a 10.0.0.0 range, site B is on a 192.0.0.0 range, at site b there is a firewall with 2 cards, Site A also has a firewall, it external is poiting to the internet at site B, so basically site A get it internet from site Bs internet. Now they have decided that site A needs to be able to have access to one sql server at site B, how can this be achieved without allowing all traffic across the link, as, for example, both sites have their own DHCP for and cannot have site A giving out IPs to site B, so its a bitmore complicated than just linking the two can it be as simple as a masquerading rule at site B, with a second card in the sql server or 3 VLANs at site B (one for site b one for site a and one for the external internet, with site As traffic tagged), idk i cant get my head around it.
View 7 Replies View RelatedD-Link DIR-655 :: Can't View Sites Through DSL?
Aug 8, 2011I have just started using D-Link 655 router and ATT DSL connection at home. There is an internet signal. Skype is working. But I can't open any sites. Ie tried typing hotmail, Google, anything - sites do not open. Ive tried to plug in the Ethernet cable directly into my laptop and I get the same result sites don open.
View 7 Replies View RelatedD-Link DIR-655 :: Can't Connect To Certain Sites
Dec 3, 2012I have dir655 Hardware Ver B1 Firmware Version: 2.10NA.Comcast Motorola cable modem surfboard SB5101. The problem started happening a couple of days ago. When my computer is hooked up to the cable model directly, i am able to connect to outlook.com just fine but when i go through my router, it can't connect to the site. I played with MTU (lower it by 10) all the way to 1300 but it didn't work.The problem started happening all the sudden without any changes in the cable modem, router or my computer.
I also tried cloning MAC address from my pc but didn't work.I also tried turn off both modem and router, wait 2 minutes, start modem, wait for all lights to come up and start the router.Sites i can't connect are: outlook.com, starcraft2, Comcast, eBay, Facebook.One thing that i noticed weird is that i am able to connect to cnn.com using IE9 just fine but ping shows: [code]
Protocols / Routing :: Unable To Access Any Sites Except Google Sites
Jul 8, 2012MY ISP installed one router in my lab.for internet connectivity they mail me steps :connect your Laptop directly to gi0/3 port to check internet connectivity with public ip 1.1.1.x and Gateway 1.1.1.1 with subnet mask 255.255.255.240 after connection I surprised because I am able to access only google sites like gmail,google search etc. but I am able to ping/traceroute all sites.from browser I am able to access only google sites only.In Router no firewall no such access list.
View 2 Replies View RelatedD-Link DIR-601 :: Router Ignores WAN Ping Setting
Apr 13, 2012Using DIR-601 hardware version B1, Firmware 2.00NA, I am debugging problems I've had with this router, so it is set up on my network so I can access it from both the WAN and LAN side. If I ping the router from the WAN side, I get a very fast response. But when I disable ping from the administrative tools from the LAN side and reboot the router, I still get responses to my ping! I know the router is responding because if I disconnect the WAN cable from the router (connected to "INTERNET", the pings stop. So the router is ignoring user settings at Advanced->Advanced Network->WAN PING! Looks like a firmware bug.
View 3 Replies View RelatedRestrict Access To Gaming Sites Via D-Link DSL G640T?
Mar 26, 2012I need to restrict access or rather, block altogether if i can, access of one of the computers on my local wireless network, to online multi-player gaming sites, in particular Age of Empires and Voobly.com, which also uses a messenger type program for them to chat.I've searched and searched online, but alas, have come up with nothing that i understand. I've tried doing the block ports thing, but am unsure if what i've been doing is right. I have blocked Voobly.com under domain and URL settings via the router admin page, but for some reason, it only seems to be denied on my computer. I even went so far as to register and download relevant programs to my computer, for Voobly, so i could see if the blocking worked. Seems it's only my computer that's blocked, i didn't specify ip or mac addresses.I am unable to get on the other computer as it's not mine, and it's also password locked. I don't know the password
View 1 Replies View RelatedTP-Link ADSL2+ Wireless :: TD-W8961ND - Can't Ping My Modem Router Remotely
Oct 16, 2012Region : Egypt
Model : TD-W8961ND
Hardware Version : V3
Firmware Version :
ISP :
my router is placed in my home. i want to access to it with IE from my office.but no luck.also i try to ping the WAN ip address of the router.
Cisco Switching/Routing :: 3560 - Setting Up 1gig Link Between Two Sites
Jul 30, 2012We are having two sites seperated by half a mile and we are using dedicated 100 Meg link at the moment for intranet traffic, and now we got new 1 gig link and I am working to set it up, Service Provider came on site installed two circuits on both sites and fiber connectivity is tested succesfully betweeen sites, now I need to connect the circuits to our network and make the 1 gig link active to make traffic flow between sites and as well bring 100 meg as standby.
So to brief the issue:
Connectivity at the moment SiteA: Switch1(3560)------100Meg--------.SiteB: Switch 2(3560)
I Want to configure SiteA: Switch 3(4507)------1gig (Active)--------.SiteB: Switch 4(3560) SiteA: Switch1(3560)------100Meg(Standby)--------.SiteB: Switch 2(3560)
simple as connecting a fiber or ethernet link from external circuit on both sites to respective switches on their interfaces and configuring hsrp to enable redundancy. A
TP-Link ADSL2+ Wireless :: TD-W8960N - URL Filter Multiple Sites / Wildcard (for Tumblr)
Mar 29, 2013Region : UnitedKingdom
Model : TD-W8960N
Hardware Version : V4
Firmware Version : 1.4.0 Build 111130 Rel.55990n
ISP : DEMON
I'm using parental controls to block all devices in the house from using tumblr. I cannot do this at a device by device level as it is being used on iphones/androids, laptops and desktops.Unfortunately, the way that tumblr works is that it use many URLs for the different pages people set up so it is not just a case of blocking url... - so I'm struggling to work out if I can do this via URL blocking on the router settings. How to do this at router level.
D-Link DIR-601 :: Website Filter / Access Control Causes Dropped Connection For Non-blocked Sites
May 4, 2011I'm trying to set up a website filter on my DIR-601. I created a policy for 2 MAC addresses, with a schedule from 10AM-6PM, selected "Block some websites", and disabled logging. Under website filter, I added some entries, and selected "DENY computers access to ONLY these sites". When the policy is enabled, and I try to access one of the blocked websites, it gets blocked correctly ("The URL access was denied by administrator.") However, for all other websites, I get "server unexpectedly dropped the connection" errors, eg "Safari can�t open the page [URL] because the server unexpectedly dropped the connection. This sometimes occurs when the server is busy. Wait for a few minutes, and then try again." or in Chrome "No data received. Unable to load the webpage because the server sent no data." This happens with ALL non-blocked websites. I'm using hardware version A1, firmware version 1.01NA.
View 2 Replies View RelatedCisco Infrastructure :: 1921 / Implement Dynamic QoS Between Two Sites Across Low Speed WAN Link (512k)?
Jan 15, 2013I have a trouble to implement dynamic QoS between two sites (Site A, and site B) across low speed WAN link (512k). On each site I have Cisco 1921 router. Most important app is Oracle. Because of slow speed WAN links, I want to avoid exact bandwith reservation for Oracle. I only reserve 5% bandwith for network control(icmp, ssh, telnet...) and want configure next Qos scenario:
1. If Oracle traffic exist on a network, it must have 70% of link speed guaranteed, all other apps (e.g mail, file share, ftp) use rest of the bandwith.
2. If there isn't Oracle traffic on a network, all other apps can use all available bandwith.
Issue descrtption:I used all Cisco guides, but when I implemented this on production it simply didn't work. There is no any significant improvement after implementing this (when I start network file sharing accross wan link, Oracle becomes etremly slow.).Here is configuration wich I trying to implement:
ACL-s and class-maps used to mark traffic:
access-list 119 remark ###QoS-MGMT###
access-list 119 permit tcp any any eq 22
access-list 119 permit tcp any any eq telnet
access-list 119 permit icmp any any
access-list 120 remark ###QoS-DB_ORA###
[code].....
Cisco Switching/Routing :: 4.2.2 Unable To Ping 1 Internet Site From Edge Router Able To Ping
Jan 18, 2013From My Router that connects to Cable modem i am unable to ping website 4.2.2.2I am able to ping all other websites fines.Same website i can ping from my pc and all other switches fine.Router has only 1 ACL thats for NAT.
View 25 Replies View RelatedHow To Block Specific Sites With Router
Oct 31, 2011I have a TL-WR740N Wireless Lite N Router and i want to block specific websites with it.
View 4 Replies View RelatedD-Link DIR-615 :: Unable To Ping It
Jul 29, 2011I'm trying to do port forwarding on my DIR-615...first of all I need to be able to ping the router from outside! I did enable the ping options to allow request from WAN...still don't work!!I removed the router and plug my laptop directly on my cable modem adapter and I'm able to ping my IP address (did put the same address the router had)...so, the IP is OK and it is possible to get in the modem from outside.I did plug back the router, and still not working...I did some trick like enable all IP with the Inbound filter...give access to few MAC address that I have to give more chances to get in and still not working!!!
View 6 Replies View RelatedD-Link DIR-615 :: Way To Ping Or Access 192.168.0.1?
Mar 25, 2011I recently bought a new DLink 615 E4 router.After a botched firmware update, I attempted to enter the emergency room.I got in once, and tried to upload the firmware using Internet Explorer 8, but it was stuck there for over two hours without any progress (stuck at the browse/upload page), so I disconnected it.
I haven't been able to enter the Emergency room since then. I get to the point where the power light blinks orange, and connecting my laptop to the router using the wired connection lights up the proper LAN light, but I cannot ping or access 192.168.0.1 anymore.
D-Link DIR-655 :: Allow ICMP 8 (Ping) Pass Through?
Dec 21, 2010I would like to passthrough ICMP 8 (ping) requests through the DIR-655 to my server. I found where to allow the router to respond to ICMP 8 requests, however, I do not want the router to responder, rather the server itself. Is there a way to pass these requests through to the server?
View 3 Replies View RelatedD-Link DIR-825 :: Couldn't See Ping Command In Log
Feb 26, 2013Who is trying the ping www.dlink.com ? I have been used the model DIR-825 during 1 year, but I could not see that ping command in the log. I had experienced that my notebook alert that DIR-825's shareport has reconnected. Why the DIR-825 lost the private connection while I sleeping?Comment: DIR-825(IP: 10.10.100.97/28) is private using only. The internet gateway is setting to DIR-655(:192.168.90.97/29). [code]
View 1 Replies View RelatedLinksys Wireless Router :: WRT54G Cannot Connect To FTP Sites?
Feb 1, 2009I could not log into any of the 4 FTP sites that I normally update without immediately getting disconnected. The message I am getting from the servers is "Port command failed, error loading directory - disconnected". To save some time and posts, here are the facts....1.) It is definately not my DSL modem. When I connect directly with the modem, without a router, I can connect to FTP fine2.) I have already done a /flushdns in IPconfig.3.) I have already done the typical power off/power on/reboot procedure numerous times.4.) I have already tried PASV mode, and tried turning PASV mode off as well.5.) My login information is correct, and I have problems on multiple sites.6.) This problem has been reported before by other users of WRT54G, but the other forums I see have no solution to the problem.7.) I have already tried using other PC's and different FTP clients on my home network. No matter which PC or laptop I use behind the router firewall, I can't maintain FTP connection. 8.) I have never had to open ports to be able to connect to FTP, since I am the one doing the request. I did also try opening ports 20 and 21. 9.) XP firewall is disabled. 10.) I have tried both ethernet ports on my PC. But then again, that is irrelevant because none of my other PC's which connect wirelessly, can connect either.
View 5 Replies View RelatedLinksys Wireless Router :: WRT54G Can't Access Own Sites
Nov 14, 2011My own sites were down & I can't view them on my computer now.This is the 2nd time this has happened to me with router WRT54G.Every time there's a problem with my hosting company & my sites go down, my router blocks them once the sites are back up & running.When I plug directly into the modem I can access them, but then I can't use my phone, etc.I've recycled & I keep trying to find how you save your settings on your router so I can do a cold reboot, but I can't find the instructions anywhere.Why does it keep doing this & how to save the settings & restore them.
View 2 Replies View Related