My sister has a DELL Latitude D610. The network drivers in Device Manager has an exclamation mark and this only started when she turned off the laptop with her external hard drive.
Here are the things that I tried. Getting the appropriate drivers System Restore Restarting the Network service Uninstalling and reinstalling the 1350 WLAN Card driver
I can't turn on the Wifi switch (Fn + F2) and then I realized its possible it doesn't have a driver so I downloaded the Broadcom 570x Gigabit Integrated Controller so far and its still not working. Here is the what is on my device manager.
Quote:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and Settingsuser>IPCONFIG/ALL
Windows IP Configuration
Host Name . . . . . . . . . . . . : LAPTOP2
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
[code]....
I have a Dell Latitude D610 and my problem is that the wifi light won't come on. I've done the Fn+F2 thing and all that is enabled is bluetooth. I've gone to dell's site and updated drivers and done basically everything I've seen others do on forums. What's interesting is that once in awhile, my wifi light comes on and my wifi will work for maybe 30 seconds and then it disappears. When i go to device manager, my broadcom 802.11g adapter sometimes shows up but usually it isn't there. So it's not there with a yellow exclamation mark over it; when it is on there it's fine but it's hardly there ever. I've even removed the wireless card and reconnected it to see if it'd work but no luck.
View 1 Replies View RelatedI bought a refurb D610 and installed Win XP several times (after I found out that the order of drivers install matters). Last install I followed the order for driver installation.
My ethernet connection (Broadcom NetXtreme 57xx Gigabit Controller) is working fine, although I'm writing this from a separate PC.
Under Network adapters in the device manager, there is only the above mentioned ethernet device, NO wireless device. That's wrong, or not?
Under Other devices (with yellow question & exclamation mark) are two devices:
1) PCI Simple Communications Controller (Device Inst. ID = VEN_104 / DEV_8038 / SUBSYS_01821028) --- ???
2) Unknown device (Device Inst. ID = ACPI BCM0101 4 15F2F7D1 & 0 ) --- TPM (?)
With Sysinternals Process Explorer I can see the following (wireless related) processes in the Windows/system32 directory: (which are started automatically)
1) WLTRYSVC.EXE
2) BCMWLTRY.EXE (WLAN Card Wireless Network Controller)
3) WLTRAY.EXE (WLAN Card Wireless Network Tray Applet)
However I don't see any wireless related icon in the system tray. When starting the "Dell Wireless WLAN Card Utility" from the Start Menu, nothing happens.
PS: this is the laptop that I was using for several years for our company (still with Windows 2000) until a couple months ago, and then bought it back (for private use) from another company that refurbs them (HD wipes) for our company. Under W2K the wireless worked perfectly! I didn't get any software with it, but downloaded all drivers from the dell site.
I have a Dell Latitude D610 laptop with windows xp pro sp3. I need to do the windows reinstallation I know you loose most of the drivers when you use the reinstall cd one of them being the wireless driver. I was wondering the directory where that driver is installed so I can copy it to my usb memory card so that when I reinstall windows I can have my wireless and get online so I can download the rest of the drivers I need.
View 4 Replies View RelatedI have a Dell Latitude d610 laptop. It connects to the internet but shows limited or no connectivity. the cable used is ok as I can connect to internet with other pc. The connection was ok before, it happened just 2 days ago. I am using windows xp 2007.
View 2 Replies View Relatedi received a dell latitude D610 and installed the operating system and the drivers, when i open the network adapters in device manager it says i have the Broadcom NetXtreme 57xx gigabit controller. when i try to connect to the internet with a cable it works fine but it wont let me detect wireless networks or if i unplug the cable an error pops up saying A network cable is unplugged i dont know if i have the right driver(s) installed.
View 2 Replies View RelatedI purchased a new Apple I Phone 4S with hotspot. I have two Dell Computers, a Latitude D830 and an Inspiron 15R, both with Window 7. These computers connect to the I4s hot spot.an older Latitude D610, Windows XP 32 Bit, will not connect. I can connect to the I4S via USB cable but not via wireless.
View 1 Replies View RelatedCan't work out how to turn on or off the wifi switch on my dell latitude d610
View 4 Replies View Relatedi can not get the PCI Simple communication Drivers where can I get it for a Dell Latitude D610
View 2 Replies View RelatedI have a dell latitude d610 laptop...until last night, I had no problems connecting my laptop to the wireless router...then..I'm not sure what happened, but I can't connect anymore. My daughter has the same kind of laptop and has absolutely no problems with connecting...so, it has to be something with mine. It's like it doesn't know that there is a wireless connection available.
View 2 Replies View RelatedMy Dell latitude E6420 fail swicht wifi. Can you tell me how to buy a swicht for change it?
View 1 Replies View RelatedI have a Dell Latitude D610 ,and i can't find drivers for Windows 7.
View 7 Replies View RelatedD610 - Intel PROSet
tab: Advance>>"Use Windows to manage WiFI" (F10)
When in Windows MODE the view network in range does NOT pick up anything even though the connection still exists.
How do I configure to see the networks in range ?
I have a DELL Latitude 630 running Windows Vista. I checked into a hotel and just cannot find the wifi network on this laptop..IT is a named network and yet all i see is an unnamed network on my list of networks found. My blackberry device can easily locate the network..but the laptop simply refuses. I have tried restarting, playing around with the advanced propoerties of the wifi adapter but all in vain. I can use the office wifi ont he same laptop without any issue..but not in my hotel.
View 2 Replies View Relatedproblem with my Dell Latitude D600 Laptop,I tried re-installing my OS, so now with a fresh new OS the wireless capabilities worked fine, but only for the first day, then the next morning the whole problem began again. Now it would say " No supported wireless adapters found" and when i would open the device manager some devices would have the yellow exclamation point, some of the devices would say "Intel PCIC compatible PCMICA controller" and " PCMICA MTD-0002" or just "card bus controller" and many other ones that would alternate when they appear. And also sometimes my network adapters would completely disappear from the list. I also tried scanning my whole drive for viruses and nothing was found.
Then i found that if you disconnect the wireless adapter physically and re connect it, it might work, but it didn't. I should also add that before this problem for some time i had another problem with the same laptop that had to do with the battery malfunctioning, and it displays a 4 orange , 1 green pattern sequence on the LED charge display. But it had never affected any of the laptops hardware or software before, so I don't know if that might have anything to do with it.
[code]...
I am trying to connect a dell latitude cpt laptop to my wireless network. I get as far as putting in the network key (which is correct), but I then get the message "the network password needs to be40bitsor 104 bits depending on your network configuration" I have a linkysys router and my othe laptop works fine.
View 1 Replies View RelatedI was given a dell latitude cpx laptop running windows xp recently with wireless b network adapter. My modem/router is a 2wire gateway DSL . When I brought the laptop home, it did not connect to my wireless network. It was able to find my ssid though, and the signal was weak even if I was close to the modem/router. Anway, someone suggested I switch from WPA to WEP encryption because old network adapters can only detect wep encryption ( or something like that) . So I did, and still no internet connection. i tried to ping yahoo.com and still not working. My DNS and Ip adress are set to automatic and still no internet. This laptop doesn't have an LAN port, so i guess it connects through internet wirelessly only. Someone also suggested i update my drivers for wireless adapter but i don't have the original disc that came along with it. This laptop was able to connect without problem before from a different network but not mine like a week ago.. I also have2 other laptops within this network and I never had a problem with it connecting wirelessly.
View 4 Replies View RelatedHow can I download the network driver for Dell Latitude D510
View 1 Replies View RelatedI'm trying to hook up my boss's service laptop (the aforementioned Dell Latitude D830) to a Netgear GS108 router so that he can check out footage from a couple of Pelco Sarix IP security cameras.Long story short, not only does the included software not detect the cameras, upon closer inspection, I cannot ping the Netgear router from an XP command prompt (when trying to do so, I received "Request timed out" messages, then Sent 4, Received 0, Lost 4, 100% loss).
Additional info- This PC has had quite a lot of setup work done to it so that it would run DOS as it is used to connected to a 15-year-old fire alarm system for programming and auditing purposes. This happened well before I was hired and my boss is not a computer person so the extent of this work is basically beyond what I can readily see- namely a partitioned HDD with DOS and a dual boot. The connection between the fire system and the PC is a serial connection facilitated by an actual serial port in the laptop. I don't know what effect, if any, this has had on the XP (sp3) portion of things.
This PC is not generally on a wired network; I mention this mainly to say its not online at work, doesn't receive an IP address from a DHCP somewhere, etc. My boss says he sometimes takes it home and connects to his home WiFi with it however. Additionally, it is not a device that belongs to our customer so it cannot be placed on their network (which is the only network and internet connection available to me). When I plug the CAT5 cable into the laptop, both LEDs flash very briefly, then a single orange LED illuminates solidly and stays that way. On the router, I get two green LEDs (which signifies gigabit speed, apparently). If I open Control Panel and click on Network Connections, I see the NIC and it appears to be connected with no issues. Double-clicking the icon shows Status: Connected at a speed of 1.0Gbps.
The IP cameras work fine. I took them home, connected them to my own home router (which other than opening some game ports, I've done nothing special with; a Linksys WRT54G). The cables I'm using are the same ones I used at the house. Note that I did NOT use this laptop when I tested them at my house- I used my own desktop PC (nothing special, except I have no antivirus, software firewall, etc.- read on).The Netgear router is technically an unknown quantity, but it is literally brand-new out of the box this morning. I had this same issue I'm currently having with a couple of "found" routers (meaning my boss/ co-workers probably found them in the trash somewhere). Naturally, I assumed both routers were bad based on the fact that the cameras worked fine at my house (again, with my PC- not this Dell laptop).
There is protective software on this PC. I have disabled the Windows Firewall via Control Panel and in Norton 360, I've enabled "Silent Mode", disabled Smart Firewall and Anti-Virus Auto Protect. I'm loathe to completely uninstall this suite because of some of the stories I've heard my boss tell about the users on his home network. This PC is the sole link to the customer's fire alarm system and has been configured (again, long before I was hired) extensively to do so. What I'm looking for mostly is something I'm missing. When I first began having issues with this system, I went into the LAN Properties for the NIC, turned off the "Obtain IP Address Automatically), and entered 192.168.1.10 for the IP, 255.255.255.0 for the subnet, and 192.168.1.1 for the gateway (based on the Netgear router's published default IP setting). When that didn't work, I tried all of the above and switched the gateway to 192.168.0.1 as the manufacturer seemed to indicate it could be either address. Same results.
I have a Latitude D820, Windows XP, SP3. At my office I have a regular docking station but at home I have a D/Dock docking station. When I dock the 820 at home the Broadcomm network card works flawlessly. When I dock it in the office, it will occasionally work but most of the time the link light and data light on the docking station are on solidly and XP reports that the cable is unplugged. I have tried two different docking stations with identical results and also tested the cable by plugging it into the docking station that holds a D810. With the D810 it worked normally.
View 1 Replies View RelatedI've got an old Dell Latitude D600, service tag <Admin Note: removed per privacy policy~RK>, that I am messing around with and i can not get it to connect to my wireless network. i have the correct driver for my wireless adapter and it shows my network in range with full strength. when i try to connect it says the network may no longer be in range and i should refresh. when refresh it is still there with good strength. when i look my wireless adapter it says it is on but as soon as it brings up the network name everything says "radio off"
View 5 Replies View Relatedi have a Dell Latitude E6400. Just reinstalled Vista Ultimate. But it say, "Update Driver Software-Ethernet Controller and Update Driver Software-Network Controller. What I need to install from Dell website?
View 1 Replies View Relatedmy laptop cant connect to wireless network but irecently installed wireless drivers.it indicates the wireless networks available.i connect and it fail to connect
View 2 Replies View RelatedMy laptop (Dell Latitude D630) suddenly stopped "seeing" my wireless network. The Windows diagnostic seems to imply that I should "turn on" my wireless card. However, when I check the hardware settings in the control panel, it says it is working properly.
View 4 Replies View RelatedI have a Latitude D400 laptop with docking station. I left on a trip for a week and came back to find I cannot connect to the network through the docking station. I can however connect if I plug the ethernet cable directly into the laptop. Is this a hardware problem with the docking station?
View 3 Replies View Relatedmy computer has designed for windows XP now I`m installing windows7 but I miss a network controller driver. my computer is dell latitude D600.
View 3 Replies View RelatedIm running windows 7 home premium. I have a Dell Latitude D360. My laptop will connect at home or at family's wifi however it will not connect at school. There are two available wifi connections and it will not connect to either. I have followed my university's instructions to connect to the internet but no good. When I run troubleshooter the error says "unable to configure ip address" or something along those lines. I have reinstalled the network adapter, changed firewall setting. I have tried just about anything I can think of.
View 1 Replies View RelatedI reinstall windows xp on my dell laptop. everything goes well except for the wireless. i see a yellow mark on network controller under other devices on the device manager.
i am able to connect through the wire, but not wireles
I just got a new Hp 620(windows 7 professional) and still got the Dell D610 (Xp service pack 2)i used before i intend to establish a home wireless ad-hoc connection between these two laptops.
View 5 Replies View RelatedJust got a D610 with no drivers cd. Rebuilt the laptop with TxDOT image and now I get a message found new hard ware pci simple communications controller. Where can I get this driver at?
View 8 Replies View RelatedI have a Latitude D810. recently unable to get connection on wireless or wired. Lights are on on port plug.I can see the network, when I run troubleshooter on the Proset/Wireless Wifi Connection utility It says the wireless adaptor failed to get IP address and could be due to authentication failure with the network, incorrect wireless security passwords or because of DHCP server malfunction.I did the passwords, checked the router, all is ok there. My new computer works fine on this wireless network as well as my wired desktop. I suspect this happened as a result of a security change that windows XP or whatever security soft ware that's in there did, but cannot figure out how to undo or reset this.
View 10 Replies View RelatedAM working on a dell latitude laptop.It has been connecting to the internet but over a sadden has stopped and in the network adapters it shows ethernet?
View 1 Replies View Related