DIR-815 Router Can't Seem To Maintain Constant Internet Connection?
May 7, 2012
I have a new DIR-815 router, with a network consisting of one HP desktop computer, one Sony VAIO laptop computer and one Samsung tablet computer.My problem is that I can't seem to maintain a constant internet connection requiring a new router setup at least once a week, sometimes more frequently.Also, even though the network I set up is called "HOME" my desktop, which is the computer connected to my cable provider, never shows any connection to that network. Both the laptop and the tablet connect to the :HOME" network while the desktop connects to something called "Network 5" which does not show up anywhere in my setup. As long as I have an Internet connection I really don't care what the connection is called, but I find it strange that I am connected to a network that apparently does not even exist
View 7 Replies
ADVERTISEMENT
Oct 14, 2012
N+ requires constant reboots to maintain speed. When I reboot the router F5D8235-4 v3 it will run at top speed of 10mbps, after a day or two it slows to about 2mpbs. A reboot will speed it up again. I would prefer that it run fast all the time. Firmware 3.00.15
View 12 Replies
View Related
Jul 17, 2012
I've recently picked up a E4200 to build a dual band network which is targeting to link up (TV, media server, ps3, laptops) then (maintaining phones etc which only has b/g). While currently only laptops.Before doing any of these I have another cisco modem router DPC3825 which worked fine with giving wireless access.I first attemped to leave the modem router has is and connected the E4200 (ethernet 1 to internet), and changed ip to x.x.0.1 and x.x.0.2 while disabling wireless on the dpc3825 and the DCHP on the e4200 and have default gateway to x.x.0.1. My laptops can connect to wireless on E4200 but it couldn't get internet access.
Then I tried turning the modem to bridge mode & resetted E4200 (factory setting x.x.1.1, auto DHCP), and then connected my devices to both wireless bands. At this point I see router status obtained ip from ISP and Internet reached full speed per ISP's mark but the connection only held up for about 1 minutes. I noticed all the devices still maintained connection to router wirelessly but the router loses internet connection (lost the ip and couldn't get it back).
View 4 Replies
View Related
Aug 3, 2011
I recently purchased an LG 42" LD550 Flat Screen TV. This TV is supposed to wirelessly connect to the Internet in order to stream Netflix, YouTube, Vudu, etc. I've purchased and connected the required LG AN-WF100 USB Adapter (dongle). My desktop computer is a Dell Studio XPS 435T/9000. My router is a D-LINK WBR-1310.
The TV simply won't maintain a connection with my network. Sometimes it will find the network just fine for several days -- then it disappears (in the list of networks, only my neighbors' networks show up, not mine).
I follow the steps in the LG manual: I go to "Network" and select "Wireless"
It then shows the AP List. My AP (SSID) is almost NEVER listed, but when it occasionally is, I select it and type in my Security Key. It then proceeds to scan, and 95 percent of the time, it comes back with the error message, "Connection is Failed. Going Back to the List". The other 5 percent of the time, it ACTUALLY CONNECTS for a while (sometimes a few minutes, sometimes a few days). Then it disappears, and the whole cycle starts again
It's been a week now since I actually got connected! Is it the TV or the router? My router works with other devices (laptop, Nook eReader, second desktop computer), so it HAS to be set up right, doesn't it? The entire reason for buying the TV was so that I could wirelessly stream from the internet, and I feel cheated.
View 9 Replies
View Related
Dec 17, 2011
I just got a new 2011 Toshiba Satellite L755 laptop with Windows 7, I also have a 2006 Compaq Presario with the original Windows Vista. We use a DIR-615 router for WIFI connection on both. The old Compaq will keep a connection with no problem and never looses a connection. The new Toshiba will keep 3 bars of signal but will not keep a constant connection to the internet. Do I need to upgrade my router, which I bought the one I have about 3-4 years ago, or could it possibly be a problem with my new computer?
View 5 Replies
View Related
Feb 20, 2012
I got Serbian Orion Telekom ADSL Max packet (16/1mb, modem: tp-link td-8816 v5), and used it in Belgrade without any issues with speeds of 13.95mb / 0.86mb. Since I have moved to another city (with recently done all infrastructure) I got this sudden CRC problems, plus ADSL2+ connection problems. Currently at ADSL2+ Annex A. and here is my speed test: And now, what's constantly occuring and is annoying me to bits is the thing that at ADSL2 connection I connect at 10mb with SNR of 6db and it successfully hangs on to the connection, but on ADSL2+ (16mb, max 24mb) with SNR of 6.8db it drops every few minutes. How can I use my 16mbit normally instead of only 10? Maybe some kind of low SNR router could work? How to treat CRC? I have new telephone cable, checked the splitters and also in wall connector.
View 3 Replies
View Related
Apr 18, 2011
I recently purchased the dir-632 and am having trouble getting my Apple Powerbook G4 to join the airport network. I get this message, you may have entered an incorrect password, (I know that I have not), network name (I know this is correct), chosen the wrong type of wireless security (here I think is my problem) or may be out of range of the base station, (impossible as I am 10 feet away, and my PC's all work in the same range).
-My settings are DHCP client
-cable status Connected
-network status connected
-801.11 mode 11bgn
I get a good strong signal from the airport but get a status connected to network and getting status message at the bottom, but the signal changes to not associated with any network every 30 seconds or so. this just cycles between the two messages. the signal does not maintain a connection.
View 3 Replies
View Related
Feb 1, 2013
I'm currently running Windows 7, and I have this issue where from time to time I am booted from my internet with the error saying either one of two things, one being; No internet access but it does show I am connected to my router, and the other being; plug in an ethernet cable. My 2 brothers on the other hand are both connected to the same router through cables as well and neither have this issue. Both issues seem to simply fix themselves by just waiting, but the disconnects are killing me.
View 2 Replies
View Related
Jan 26, 2013
I borrowed a laptop from my sister while my laptop is out of commission. I've been trying to use the wifi, but the connection keeps dropping. I've tried following different pieces of advice from the internet, and I still can't get it working[CODE]
View 19 Replies
View Related
Sep 5, 2011
I mostly use my computer in my house, so I am not sure if it is a network problem, or something is wrong with my laptop, but I am having a lot of trouble maintaining a constant connection lately. Often times, I try to load a page and it says "connection reset" or whatever.I have a Dell Studio laptop with an Intel WiFi Link 5100 AGN wireless card. I am using the Broadcom Netlink driver along with Microsoft Miniport Adapter (all of this info came from my Device Manager). I'm running Windows 7 Home Premium 64-bit, 4GB RAM, Intel Core 2 Duo T6500 2.10 GHz, Service Pack 1.
View 10 Replies
View Related
May 30, 2012
So I recently had to get Comca$t xfinity cable internet due to Verizon Fios not being available in my new home.With Fios on my laptop, I didn't lose connection at all in 3 years.With Comca$t, I lose my wifi connection just about every other minute.It just keeps disconnecting and reconnecting.I'm running Vista.My Ipad is connected just fine and doesn't drop connection.This makes me think it has something to do with my laptop. They are the same distance from the wireless gateway.
View 11 Replies
View Related
Oct 10, 2011
can't figure out what's killing my desktop's connection.I'm running Windows 6 Ultimate x64. I was using an Aztech Wireless-N WL522USB adaptor before, and it was working perfectly fine apart from the fact that it was a tad slow, which led me to buy a new Linksys AE1000 adaptor.I'm guessing I caused some kind of conflict, because after an hour or two of use (and after installation of the drivers), I started getting DRIVER_IRQL_NOT_LESS_OR_EQUAL BSODs, as well as my connection dying on me. I did not uninstall the drivers for the Aztech adaptor before installing the new one, and I have a feeling this might have something to do with it. Anyway, right now, I've switched back to the Aztech (intend to return the Linksys), and I'm still having connection problems. The tooltip of the wireless icon on the toolbar shows "No Network Access", while clicking on it shows "Limited Access". I have neither internet access nor local access to the router. The weird thing is that it works for a VERY short period of time after starting up, where I will have full internet access, and after which it will revert to the Limited Access state.
View 14 Replies
View Related
Feb 26, 2013
I need to know if i can connect RAP to RAP and maintain redundancy with connection to WLC.
I have one 1552 with the gigabit ethernet connected to the gigabit ethernet to another device that has a point-to-point link with another device where have a ethernet connection with a switch in the same broadcast domain where i have my WLC.
Next to this 1552 i have another 1552 that have the same situation, both with omnidirectional antenna.
I would like to have a Mesh connection with these two 1552 in 5Ghz, because if some point-to-point link is down i need redundancy to the WLC and my network, because i have some clients connected in the 2.4 Ghz in both Access Points.
View 4 Replies
View Related
Sep 23, 2012
I'm using is the Netgear WNDA3100v2.What happens is when I attempt to connect to the internet I have to reset the adapter multiple times before it even recognizes my internet. And then once that happens it takes a few more tries to actually connect. And when I'm connected the speed is fairly decent (around 15-30 Mbps). Problem is, every 5 minutes maybe even less, I disconnect. Then I have to go back through the process of restarting the adapter and whatnot until I reconnect. I've been dealing with this problem for a few months now and have neglected to post about it anywhere because I didn't think it to be this unique.
I have tried just about every other "solution" I could find on the problem and none have worked. Also, if this says anything, I have a laptop setup literally 1 foot or less from my desktop and it connects perfectly well and good using the same adapter. Also I recently purchased another adapter (Linksys AE3000). I figured this might solve my ailment but of course, the same thing happens as the Netgear, except possibly worse. And that adapter works fine on the laptop as well. I also just yesterday completely reformatted my computer hoping it would work, but of course didn't. [code]
View 8 Replies
View Related
Jul 11, 2011
I have been working with my ASA 5505 VPN Concentrator to maintain a connection with one of my remote sites. I have several tunnels that work fine and dont have any issues at all, but one tunnel with outside IP ending in 146 and inside LAN 192.168.3.0 goes down every 24 hours. Attached is the config from the concentrator. I changed around the Security Association Lifetime Settings and the tunnel would drop after that amount of time expired. If I set it to 24 hours, the tunnel would drop every 24 hours. If I set it to 8 hours it would go down every 8 hours.
I have swapped the router a few times, double and triple checked my key settings, disabled keep alives on both ends, and this problem just started happening a few weeks ago after working fine for years. I also get the following e-mail error every time it goes down:
<161>Jul 10 2011 16:19:47: %ASA-1-713900: Group = xxx.xxx.xxx.146, IP = xxx.xxx.xxx.146, construct_ipsec_delete(): No SPI to identify Phase 2 SA!
View 6 Replies
View Related
Dec 21, 2011
I keep getting disconnect from the internet about every 10-15 minutes.I had a tech from cableone come over yesterday he installed all new wiring and a new modem.how can i tell if it's my computer that is the problem or if it's just a service i need to get rid of?
View 8 Replies
View Related
Dec 17, 2012
In the past week I have been getting totally random disconnects from my modem. Sometimes it works great, other times it will essentially cease to function as it tries to sync to bells lines, it seems to be worse at night from what I've seen. I have called my ISP over 4 times, had 3 separate techs come to my house and replace everything from the router to the Internet port down the road.The only thing that has not been replaced is the actual phone jack in my wall but every tech has looked at it and said its functioning fine. I am at a loss, and on the verge of canceling my service with my ISP at this point. Problem is I cannot get rogers for various reasons, so bell is my only option for high speed internet, so canceling with them sorts leaves me high and dry.
View 1 Replies
View Related
May 14, 2012
I have a Belkin Wireless G Router. Whenever I set up a wireless password and network name, within a few hours, the router resets its self to its factory settings. The router will not let me maintain a secure network because of this. How do I make it so that all the settings that I set will stick?
View 2 Replies
View Related
Sep 17, 2012
I am not good at networking. My friend wanted me to set up his home network.because the modem is unable to supply a good wireless connection to the rest of the household when the door is closed, a second router was needed.I set both routers to run with DHCP as they have many devices that needs to connect to the router for internet. However, a few hours after setting it up, my friend's pc as well as all devices connected to the second router faced issues. The router's interface showed that it does not have connection to the internet. they are still facing this problem until now.
View 7 Replies
View Related
Sep 17, 2011
I am an unlucky person who still has a belkin router. Not only do i have a belkin router, my PC is also connected via 2 switch boxes all ethernet cabled together in and around the house.
I am unable to forward and ports succesfully because after i have saved the settings i check it with a port checking site and it says they're all closed.
I have also been getting disconnected from my router when its under stress (Most recently playing League of Legends) but my Dad's Pc (Which is only connected to the Belkin) still stays connected and hasn't experienced any disconnections.
My router model is F5D7634-4 v2, DHCP is enabled but only my Dad's PC appears, UPnP is enabled but doesn't seem to work and my fireware is up to date.
I used to have a different router before this one which never had these disconnecting problems.
View 14 Replies
View Related
Jan 30, 2012
I just got a DIR-655, and I got it working, with some effort. However, the wifi stops connecting to the internet every few hours and requires a reboot. Only a reboot of the wifi portion of the router's software, I go to Manual Wireless Connection Setup and save it without changing anything. LAN connections don't experience this.
Comcast Cable connection
DIR-655
Hardware Version: B1
Firmware Version: 2.00NA
View 10 Replies
View Related
Sep 7, 2012
Lately, I upgrade the firmware on my router. A linksys WRT54G. In order to access the router I had to do a manual reset to factory settings. Post upgrade, for some reason I couldn't access the internet. I tried everything for hours and finally through sheer luck of unplugging every cable and ever power lead and plugging it back in, it started working.
However, lately I've found that the only computer connected to the internet via eathernet cable is loosing connection intermittently. Also we seem to get constant huge spikes in latency and very inconsistent speed. Unplugging the router and plugging it back in again seems to solve this problem temporarily, but requires toggling of power multiple times a day. Also I had what I believe was an IP address conflict, or lack of an IP address once, but using the windows troubleshoot errors fixed that by resetting my wireless network card. (This was on a 2nd machine)
[code]...
View 8 Replies
View Related
Jun 3, 2012
I've been having this issue with my wireless connection for quite a few months now and up until now I've just dealt with it. With the release of Diablo 3 (whoo!) it's become unbearable with this lag spikes. My ping will be fine, steady around 50-90 but then randomly spike upwards of 400. After a few moments (literally a second or two) it'll drop back down to it's normal speed. This happens in all online games I play, WoW, League of Legends, DotA 2 and now Diablo 3, I have roadrunner and pay for 25 download and 1 upload so it should be more than enough to play the games I'd like, I'm also running on windows 7. I think part of the problem could be the fact that the router is in the basement and I'm on the second story. I have a netgear wndr3700v3 router and I set up a repeater in my room to see if that would work (asus rt-n12 router) and although it has increased my speed, I still have these ping spikes.
View 2 Replies
View Related
Nov 7, 2009
I don't have any problem with the wireless computers connected to the router but the wired one keep geeting disconnected. I'm loosing the internet many times a day on thiis one. Like I said the wireless is ok. My old router on my computer ( wired) was working well before I installed the wrt120n.
View 3 Replies
View Related
Nov 13, 2011
I'm running a D-Link DIR-655 Hardware Version A3, Firmware Version 1.21. In the past, it has been flaky, and I considered updating to the latest firmware (1.3+ something), but everywhere I read (mainly this forum) said it might be WORSE for the router and couldn't even be downgraded, so I decided to ride it out.
Eventually the problem disappeared and I forgot about it, but now it's back with a vengeance. Recently I opened up a Guest Zone so my neighbors could borrow wifi, and I occasionally run torrents. Torrenting seems to definitely crash the router overnight, while it also seems to randomly bug out, possibly when the neighbors are using the Guest Zone. The Guest Zone might be responsible, but I have no idea.
For what it's worth, I don't think my neighbors are terribly tech-savvy, so I doubt they're filesharing or doing anything risky. They might have malware installed, but I don't know.
Is there a way I can diagnosis my precise issue, should I go ahead and update to the latest firmware to try?
View 4 Replies
View Related
Dec 5, 2011
I upgraded my E3000 to a new E4200 several months ago. I use an SSL VPN to connect to work which worked fine on 1.0.01 and 1.0.02 but I upgraded to 1.0.03 to fix an issue where the router constantly reboots when I stream Netflix or Hulu and now the router reboots with Netflix, Hulu AND the SSL VPN tunnel initiation.
View 6 Replies
View Related
Apr 23, 2013
Linksys E3000
firmware 1.0.04 build 6 Dec 6, 2010
I get 5-10 second dropouts in waves pretty randomly. When it happens, I get a couple at a time, and normally have to stop playing out of frustration.I have a powerline adapter hooked up to my pc to the router. That router has an apple router attached by cat5e running a second wireless network somewhere else in the house.I've tried DMZing my pc, disconnecting the apple router, nothing seems to be fixing it.Here are 3 pathpings while my computer is in DMZ, so the router shouldnt be messing with my DHCP (right?). The first one shows it while i was disconnected twice in less than a minutethink this is on my end or my ISP?
View 2 Replies
View Related
Oct 9, 2012
I've recently acquired a Linksys E1200 router--which is more than a week old--from the recommendation of a friend of mine. The service is great and all, but the one thing that frequently bothers me is the seeming constant instability of my router's model. There are moments when the router performs smoothly, but there is as much an instance because the router doesn't seem to work at all even when the lights (and the accompanying connection) on my modem seem to be working in good order.
I know that a router will always have its problems, but this is really a constant problem with the E1200; and if so, if there's any way possible on how I can be able to "stabilize" the said router's performance.
View 9 Replies
View Related
Jan 6, 2013
I am trying to figure out whyt my DPC3825 does not maintain a FTP session I did not really want to post this message rather I am trying to figure out how to search this board.
View 1 Replies
View Related
Jun 27, 2012
I am upgrading the network equipment at my place of employment. We use Cisco C3560, 2960, 4506 and I was noticing that IOS 15.0.x is available. After doing some reading it appears that Cisco is going to a pay for the licensing functionality that you want. Do I need to purchase licenses to upgrade from IOS 12.X to 15.0.x to maintain functionality?
View 4 Replies
View Related
Mar 6, 2013
When we originally deployed our Cisco Prime NCS and MSE Virtual Appliances, the VMsphere server they were on was not able to assign us the level of resources we requested. We installed the MSE as "LOW" system due to the memory and CPU requirements. It has a 2000 CAS element limit. At the time we were licensed for 1000, so no huge problem.
Now, we purchased a Cisco UCS C240 server to run our Prime NCS and MSE on, which gives us our own environment where we have plenty of resources. I also bought 6000 CAS element licensing.
The catch is, how can I either do a fresh install, using the same UID, on our new UCS server, so that our licensing is still valid when we move the box, or, is it possible to do some sort of platform reinstall or upgrade after moving our original MSE VM guest over to the UCS server? Sadly, I can't even utilize the additional 1000 CAS element licensing at this time because it won't allow me to add the 6000 license and use only 2000, on the LOW appliance. So I've got to get these VM guests moved, but maintain any UID's so that the licensing still works.
Is it possible to disconnect the licensing we have, from the UID, and move it to a different UID?
View 6 Replies
View Related
Sep 19, 2011
After reading the post titled "ASA 5520 nat access-list query for internet access" I realized the object-group command could and should be used to make a more efficient and cleaner configuration. My current environment is very small and straight forward consisting of one FTP server in the DMZ. Though the guide: [URL] is straight forward, my inexperience hinders me from seeing how to use the commands effectively. A summary of the configuration is at the bottom of this post
Question: How can I clean up my current configuration? I have two references to the same server, dmz-rdp and dmz-ftp, created for port forwarding ports 3389 and ftp through the outside interface. I can combine them into one object statement, right? for each port I want to forward through the outside interface?
object network dmz-rdp
host 10.10.10.4
nat (DMZ,outside) static interface service tcp 3389 3389
[Code]....
View 1 Replies
View Related
Sep 12, 2011
I currently live in a fairly-large apartment in Downtown San Francisco and as you can probably imagine, I have ALOT of interference with nearby residential and business wifi's, microwave's, cell-phones and all that jazz.
I currently have the ATT Elite DSL package, which is I believe the 6MBPS(?) package? Anyway, it's the $40 package and I want to say it's either the second or third up from the basic 19.95/month subscription. Here's my problem: ever since I moved into this building, I get signal drops on my ATT all the time--like at least once an hour if not more often. I had a technician check the wiring and he even replaced the router box (they always do) in hopes of improving the situation but so far, no dice.
I have tried switching to different channels after using scanning to see what channels other internet users nearby were using, but I did not see any improvement.The best solution I've been able to come up with is to set my router to be on 802.11B only. For the most part,I have not disconnected but I do feel a certain amount of slow-down or lag compared to my 802.11G settings.Now,I might be paranoid but it certainly does take a good amount of time longer to load up pages and such as compared to previously.The tech suggested I look towards getting an 802.11A/N router, but alas ATT does not support routers of that caliber...not sure why. It's been years and they're still stuck with the 2Wire 2701HG-B model for DSL.
View 2 Replies
View Related
