Netgear WNDA3100v2 Wireless Network Adapter Will Not Maintain Connection
Sep 23, 2012
I'm using is the Netgear WNDA3100v2.What happens is when I attempt to connect to the internet I have to reset the adapter multiple times before it even recognizes my internet. And then once that happens it takes a few more tries to actually connect. And when I'm connected the speed is fairly decent (around 15-30 Mbps). Problem is, every 5 minutes maybe even less, I disconnect. Then I have to go back through the process of restarting the adapter and whatnot until I reconnect. I've been dealing with this problem for a few months now and have neglected to post about it anywhere because I didn't think it to be this unique.
I have tried just about every other "solution" I could find on the problem and none have worked. Also, if this says anything, I have a laptop setup literally 1 foot or less from my desktop and it connects perfectly well and good using the same adapter. Also I recently purchased another adapter (Linksys AE3000). I figured this might solve my ailment but of course, the same thing happens as the Netgear, except possibly worse. And that adapter works fine on the laptop as well. I also just yesterday completely reformatted my computer hoping it would work, but of course didn't. [code]
View 8 Replies
ADVERTISEMENT
Jan 28, 2011
I can connect fine to my VM superhub using the above named USB, the internet connection is fine downloading at high speeds and generally surfing the web and streaming media, but as soon as I log a game most notibly World of Warcraft, the USB NIC just drops the internet connection, i have had cmd open pinging a site and i enter game and the pinging fails and once i alt tab back it resumes again, could this be an issue with the fact WoW cause massive CPU Usage or could it be something else im over looking, tried changin numerous features such as channel router broadcasts on removing all firewalls, and updating drivers to switching which usb port it is plugged into and still cant seem to get any luck staying connected when in game.
View 3 Replies
View Related
Jun 18, 2012
I an on this form from my cell right now.. so, the computer i want to get Online with is a desktop and i have been days with this problem.
View 14 Replies
View Related
Nov 13, 2011
How do I configure and set up my desktop to get on my neighbors internet connection with the netgear wireless adapter.
View 3 Replies
View Related
May 24, 2012
My Netgear adapter will not join the wireless network and keeps timing out.
View 3 Replies
View Related
Sep 5, 2011
I mostly use my computer in my house, so I am not sure if it is a network problem, or something is wrong with my laptop, but I am having a lot of trouble maintaining a constant connection lately. Often times, I try to load a page and it says "connection reset" or whatever.I have a Dell Studio laptop with an Intel WiFi Link 5100 AGN wireless card. I am using the Broadcom Netlink driver along with Microsoft Miniport Adapter (all of this info came from my Device Manager). I'm running Windows 7 Home Premium 64-bit, 4GB RAM, Intel Core 2 Duo T6500 2.10 GHz, Service Pack 1.
View 10 Replies
View Related
Oct 10, 2011
can't figure out what's killing my desktop's connection.I'm running Windows 6 Ultimate x64. I was using an Aztech Wireless-N WL522USB adaptor before, and it was working perfectly fine apart from the fact that it was a tad slow, which led me to buy a new Linksys AE1000 adaptor.I'm guessing I caused some kind of conflict, because after an hour or two of use (and after installation of the drivers), I started getting DRIVER_IRQL_NOT_LESS_OR_EQUAL BSODs, as well as my connection dying on me. I did not uninstall the drivers for the Aztech adaptor before installing the new one, and I have a feeling this might have something to do with it. Anyway, right now, I've switched back to the Aztech (intend to return the Linksys), and I'm still having connection problems. The tooltip of the wireless icon on the toolbar shows "No Network Access", while clicking on it shows "Limited Access". I have neither internet access nor local access to the router. The weird thing is that it works for a VERY short period of time after starting up, where I will have full internet access, and after which it will revert to the Limited Access state.
View 14 Replies
View Related
Sep 29, 2011
I bought a Netgear WNA3100 wireless adapter today but when connecting, it says limited access after entering the SSID and the passphrase. I currently have windows 7.
View 2 Replies
View Related
Jan 14, 2012
I have purchased a couple network usb adapters (Netgear N-300 and Linksys AE2500) and both work fine surfing the internet but when I try to play World of Warcraft the wifi loses connection to the router and I lose all internet capabilities on my computer. My friends computer is still able to use the internet though.
View 1 Replies
View Related
Aug 3, 2011
I recently purchased an LG 42" LD550 Flat Screen TV. This TV is supposed to wirelessly connect to the Internet in order to stream Netflix, YouTube, Vudu, etc. I've purchased and connected the required LG AN-WF100 USB Adapter (dongle). My desktop computer is a Dell Studio XPS 435T/9000. My router is a D-LINK WBR-1310.
The TV simply won't maintain a connection with my network. Sometimes it will find the network just fine for several days -- then it disappears (in the list of networks, only my neighbors' networks show up, not mine).
I follow the steps in the LG manual: I go to "Network" and select "Wireless"
It then shows the AP List. My AP (SSID) is almost NEVER listed, but when it occasionally is, I select it and type in my Security Key. It then proceeds to scan, and 95 percent of the time, it comes back with the error message, "Connection is Failed. Going Back to the List". The other 5 percent of the time, it ACTUALLY CONNECTS for a while (sometimes a few minutes, sometimes a few days). Then it disappears, and the whole cycle starts again
It's been a week now since I actually got connected! Is it the TV or the router? My router works with other devices (laptop, Nook eReader, second desktop computer), so it HAS to be set up right, doesn't it? The entire reason for buying the TV was so that I could wirelessly stream from the internet, and I feel cheated.
View 9 Replies
View Related
Feb 26, 2013
I need to know if i can connect RAP to RAP and maintain redundancy with connection to WLC.
I have one 1552 with the gigabit ethernet connected to the gigabit ethernet to another device that has a point-to-point link with another device where have a ethernet connection with a switch in the same broadcast domain where i have my WLC.
Next to this 1552 i have another 1552 that have the same situation, both with omnidirectional antenna.
I would like to have a Mesh connection with these two 1552 in 5Ghz, because if some point-to-point link is down i need redundancy to the WLC and my network, because i have some clients connected in the 2.4 Ghz in both Access Points.
View 4 Replies
View Related
Jul 17, 2012
I've recently picked up a E4200 to build a dual band network which is targeting to link up (TV, media server, ps3, laptops) then (maintaining phones etc which only has b/g). While currently only laptops.Before doing any of these I have another cisco modem router DPC3825 which worked fine with giving wireless access.I first attemped to leave the modem router has is and connected the E4200 (ethernet 1 to internet), and changed ip to x.x.0.1 and x.x.0.2 while disabling wireless on the dpc3825 and the DCHP on the e4200 and have default gateway to x.x.0.1. My laptops can connect to wireless on E4200 but it couldn't get internet access.
Then I tried turning the modem to bridge mode & resetted E4200 (factory setting x.x.1.1, auto DHCP), and then connected my devices to both wireless bands. At this point I see router status obtained ip from ISP and Internet reached full speed per ISP's mark but the connection only held up for about 1 minutes. I noticed all the devices still maintained connection to router wirelessly but the router loses internet connection (lost the ip and couldn't get it back).
View 4 Replies
View Related
Jun 8, 2011
I built my first computer today (woot!) but I'm having issues using my netgear N300 usb adapter to access the internet.
I am using a DLink router but for some reason I am getting some weird issues.
First of all, after using the netgear usb adapter, my mac address is something like E0-xx-xx-xx-xx-xx with the xx being the other numbers. Is having a macaddress starting with E0 wrong? All the other 5 devices on my router have mac addresses starting with 00.
Secondly, I am getting a 169.xxxxxx ip address. This is really starting to bother me because I can't set it up using DHCP.
View 8 Replies
View Related
Feb 20, 2012
I got Serbian Orion Telekom ADSL Max packet (16/1mb, modem: tp-link td-8816 v5), and used it in Belgrade without any issues with speeds of 13.95mb / 0.86mb. Since I have moved to another city (with recently done all infrastructure) I got this sudden CRC problems, plus ADSL2+ connection problems. Currently at ADSL2+ Annex A. and here is my speed test: And now, what's constantly occuring and is annoying me to bits is the thing that at ADSL2 connection I connect at 10mb with SNR of 6db and it successfully hangs on to the connection, but on ADSL2+ (16mb, max 24mb) with SNR of 6.8db it drops every few minutes. How can I use my 16mbit normally instead of only 10? Maybe some kind of low SNR router could work? How to treat CRC? I have new telephone cable, checked the splitters and also in wall connector.
View 3 Replies
View Related
Jan 28, 2011
My wireless network is connected through a Netgear WNDR3700 router. My pc (see sig) connects to the router via a Netgear WNDA3100v2 adaptor.
Every 30-60 seconds I hear the audible alert & dialog box telling me my computer is now connected to the internet. So that means every 30-60 my computer must be losing access to the internet. I've been pulling my hair out trying to figure out what's going on, to no avail.
I've done all the obvious troubleshooting.
- rebooted cable modem
- rebooted router
- uninstalled & reinstalled drivers
- connected via both 2.4g & 5g radios
- reset & reconfig router settings
View 6 Replies
View Related
Apr 18, 2011
I recently purchased the dir-632 and am having trouble getting my Apple Powerbook G4 to join the airport network. I get this message, you may have entered an incorrect password, (I know that I have not), network name (I know this is correct), chosen the wrong type of wireless security (here I think is my problem) or may be out of range of the base station, (impossible as I am 10 feet away, and my PC's all work in the same range).
-My settings are DHCP client
-cable status Connected
-network status connected
-801.11 mode 11bgn
I get a good strong signal from the airport but get a status connected to network and getting status message at the bottom, but the signal changes to not associated with any network every 30 seconds or so. this just cycles between the two messages. the signal does not maintain a connection.
View 3 Replies
View Related
Jan 26, 2013
I borrowed a laptop from my sister while my laptop is out of commission. I've been trying to use the wifi, but the connection keeps dropping. I've tried following different pieces of advice from the internet, and I still can't get it working[CODE]
View 19 Replies
View Related
May 30, 2012
So I recently had to get Comca$t xfinity cable internet due to Verizon Fios not being available in my new home.With Fios on my laptop, I didn't lose connection at all in 3 years.With Comca$t, I lose my wifi connection just about every other minute.It just keeps disconnecting and reconnecting.I'm running Vista.My Ipad is connected just fine and doesn't drop connection.This makes me think it has something to do with my laptop. They are the same distance from the wireless gateway.
View 11 Replies
View Related
May 7, 2012
I have a new DIR-815 router, with a network consisting of one HP desktop computer, one Sony VAIO laptop computer and one Samsung tablet computer.My problem is that I can't seem to maintain a constant internet connection requiring a new router setup at least once a week, sometimes more frequently.Also, even though the network I set up is called "HOME" my desktop, which is the computer connected to my cable provider, never shows any connection to that network. Both the laptop and the tablet connect to the :HOME" network while the desktop connects to something called "Network 5" which does not show up anywhere in my setup. As long as I have an Internet connection I really don't care what the connection is called, but I find it strange that I am connected to a network that apparently does not even exist
View 7 Replies
View Related
Jul 11, 2011
I have been working with my ASA 5505 VPN Concentrator to maintain a connection with one of my remote sites. I have several tunnels that work fine and dont have any issues at all, but one tunnel with outside IP ending in 146 and inside LAN 192.168.3.0 goes down every 24 hours. Attached is the config from the concentrator. I changed around the Security Association Lifetime Settings and the tunnel would drop after that amount of time expired. If I set it to 24 hours, the tunnel would drop every 24 hours. If I set it to 8 hours it would go down every 8 hours.
I have swapped the router a few times, double and triple checked my key settings, disabled keep alives on both ends, and this problem just started happening a few weeks ago after working fine for years. I also get the following e-mail error every time it goes down:
<161>Jul 10 2011 16:19:47: %ASA-1-713900: Group = xxx.xxx.xxx.146, IP = xxx.xxx.xxx.146, construct_ipsec_delete(): No SPI to identify Phase 2 SA!
View 6 Replies
View Related
Dec 4, 2011
I'm using a dlink network adapter(6 months old) on my pc, have always gotten an excellent signal. Main pc in house is hooked up to dir-615 router & works fine. I had some bsod's recently & decided to reformat xp. I did a reformat back in july because of a bsod from avast antivirus & had no problems till now. An xp repair didn't work this time. Loaded the driver for the adapter, got an excellent signal, but couldn't access the net. The signal shows 4 green bars for about 20 seconds, then all white bars for a few seconds, then back to green. It keeps dropping the signal over & over. The network card shows its working properly. I did an ipconfig, and it says "media state disconnected" & shows no addresses. It has to be some setting somewhere in the pc thats not right & not the adapter thats the problem.The reformat went fine, loaded all the drivers in the right order. I only have IE for a browser which i need to access the net with to load firefox & all other programs plus service pack 3 & other xp updates back on with. When i loaded the driver for the dlink adapter, i used a different workgroup/name than the network name originally used to set up the dlink router if that means
View 3 Replies
View Related
Jan 27, 2012
Recently the wireless internet connection on only one of my laptops is really laggy. By laggy I mean that usually the connection is ok, 20mbps, but like once in a couple of minutes the connection slows down to like 3mb for a minute or so ( Speedtest.net - The Global Broadband Speed Test) and when it does the connection becomes really slow. This is very annoying when browsing the internet or playing online games, because it causes connection losts, and slows down loading webpages etc. The problem has to do something with my laptop because on my other (wireless) laptops and the wired PC these problems don't occur. The problem also occurs when no other PC is connected to the network.My laptop is an Asus K53SV and my wireless adaptor is an Atheros AR9002WB-1NG Wireless Network Adaptor. My ISP is UPC (The Netherlands).
View 8 Replies
View Related
Feb 27, 2013
I just purchased 2 AE3000 adapters to update my wireless network and cannot get either of them to connect to my wireless network through either of two computers I tried. It hangs for a while looking for address and then I get the 'limited or no connection' note. But yet when I plug in my old AE1000 adapter into either computer I get connected right away. I've looked under the device manager and it shows up there, the LED lights come on and I see my wireless network show up on available networks. I am using the windows wireless manager in lieu of the Linksys one and as such I don't think any specific drivers are being used. I bought two updated adapters to start with is to keep current and NOT have problems.
XP Pro SP3
WRT350N Router
View 6 Replies
View Related
Jun 2, 2011
Currently using a netgear WG602 wireless router which i use to connect to my 2nd PC and Iphone, with the Netgear router running from my main PC.I have recently been having trouble with my 2nd PC ad Iphone randomly losing connection and the only way for the connection to be reastablished is to reboot the wireless router. Once rebooted i am able to connect again to the internet with no problems, interestingly enough my main PC never loses connection. Also sometimes when i lose my connection and reboot the wireless router i will have a IP conflict pop up on my 2nd PC however i would i say i get this once in every 10 dissconects and not all the time. Sometimes i won't dissconect at all in a day but sometimes i may dissconect 5-6 times.
View 1 Replies
View Related
Feb 20, 2012
Can I use wireless USB g netgear adapter with wireless n belkin router
View 1 Replies
View Related
May 5, 2012
Im trying to install this on a Dell Demension 4700 with win xp professional, I get as far as the setup, but can't go any further, the software wont let me set up any wireless.
View 2 Replies
View Related
Aug 11, 2011
I am using two desktops. One is an old Windows XP running SP3, and the other is a new Windows 7. Neither PC is wireless. I set up the modem through the Windows 7 computer, and it is connected to the wireless modem through the Ethernet cable. (I hope that I am saying all of this correctly.) It's running just fine.Because the other PC is not wireless, I purchased a NETGEAR wireless USB adapter, go through installation and setup, starts and finds my SSID, add WEP key, etc, etc. In the bottom corner of the software it says the signal is good. In the toolbar it says the adapter is connected to the modem.Next to it, though, the network connections icon shows:
Wireless Network Connection
Speed: 24Mbps
Signal Strength: Good
Status: Limited or no connectivity
And so, of course, I have no connection to the Internet. Using the modem through Ethernet on the XP computer (switching the situation around, in other words) is not an option; the only phone line for connecting the modem to the wall is too far away.(It was stated more than once that I should use WPA instead of WEP; I haven't made it that far yet... I'm just trying to get this other computer connected.)
View 6 Replies
View Related
Sep 9, 2012
I have finally got netgear adapter to connect to router, and its connected, but not able to access any webpages. I am not receiving any bytes back. I had to manually type in a IP address, as it was not picking it up automatically. I have other devices connected to the router (laptop, ipad, iphones) and access web easily. I have tried hard resets, and shut downs all with no avail
View 14 Replies
View Related
Aug 30, 2011
My friend has had constant issues with his wireless network using his dated Linksys router. So he finally decided to upgrade to the Netgear N750. It's a dual band router that simultaneously broadcasts 2.4 and 5 GHz bands. He setup the 2.4 band for the laptops and mobile devices to access, and the 5 band just for gaming on his xbox 360 Slim. He immediately ran into a problem. The 360 slim's built-in wireless card only picks up 2.4 GHz frequencies. To remedy this, he purchased Microsoft's xbox 360 wireless-N adapter as it can pick up 5 GHz frequencies. However, there was no change after plugging the adapter into the 360 slim. His HP laptop can see the 5 GHz network just fine, so we know it's being broadcast. Could it be the xbox is out of range of the 5 GHz band? Is the adapter not functioning properly with the 360 slim?
View 2 Replies
View Related
Apr 6, 2011
I have a Netgear Wireless Adapter WNA1100 and I'm trying to connect my 2nd desktop comp using it. I'm having trouble staying connected. The wireless connection says 100% but when I ope IE and yahoo homepage comes up it only stays connected for a sec and it says "unable to stay connect, do you wish to work offline" then it automatically put in offline mode, which doesnt work. Now it's saying IE cannot display webpage.
View 2 Replies
View Related
Sep 26, 2011
What I need is a net gear n300 wireless usb adapter driver that works for linux, windows 98, windows 982nd edition and windows xp because i'm switching this computer to windows xp and i need a solid internet connection throughout the entire process or a way to switch my computer to windows xp with out the internet conection like a download of the windows xp instalation file.
View 2 Replies
View Related
Jan 3, 2012
This is an older desktop, Been utilizing the net gear to get on the Internet for months and it was working fine,shows it is connected to ssid but ip shows up as 0.0.0.0 I have other home computers hooked up and work g so I located there ip address, can I input it myself ? If so how?
View 2 Replies
View Related
Jul 20, 2012
I'm finally upgrading my internet from my currently pathetic 1.5 mbps to a robust 20 mbps cable connection. It's getting installed over the weekend and my question is, should I try to place the modem close enough to my pc for a direct ethernet connection, or will wireless be fast enough to take advantage of the full 20 mbps? I have a linksys wireless-g wrt54g router. It says it's 54mbps so it should be far beyond my cable speed. My adapter on my pc is a Netgear WNDA3100-100NAR dual band usb 2.0 wireless N adapter that claims up to 300 mbps. So it seems like I should be able to achieve the same speeds wireless or wired, but really don't know much about networking other than basic router setup so wanted to double check. It will be a bit of hassle to try to route the modem into my computer room as I don't have any lines run there currently. If I place it by the tv and go wireless it's a lot easier setup.
View 4 Replies
View Related
