Dell :: 3300 Print Adapter And Netgear WNDR3700 Wireless N Router
Jan 29, 2010
I am trying to configure a 3300 Wireless Print Adapter with a NET GEAR WNDR3700 Wireless N Router. During the Configuration if I have no security set up on my network, the 3300 establishes a connection. If I however, turn any form of security on ( WEP, WPA-PSK [TKIP, WPA-PSK [TKIP] + WPA2-PSK [AES] ), the Connection fails. No security is not an option.
This happened while switching routers. The 3300 worked fine on my D-Link Wireless G router (WEP). I was wondering how to resolve it.?
View 7 Replies
ADVERTISEMENT
Oct 27, 2011
I recently purchased a new Dell Inspiron laptop with Windows 7. When I try to load my printer (Dell 924 All-in-one) and wireless printer adapter (Dell 3300) software it says it is not compatible with Windows&. Is there a patch or something that I can download from Dell to fix this issue?
View 2 Replies
View Related
Nov 17, 2011
I am trying to access the settings webapge so that I can delete computers from the scan list. When I select the settings link it attempts to open the page but then the lights on the adapter start to flash and it seems to lose the connection with it ....... The other links e.g. status, information and security seem to work OK provided they are aceessed before I select the settings link. One the lights have started to flash I have to switch off the adapter and switch back to restore the connection to the network. The adapter is connected to a BTHomehub. Other than this issue the printer works fine through the network.
View 15 Replies
View Related
Dec 23, 2011
A friend gave me a Netgear 3300 wireless router. No start up disk, just the router. I get internet through Comcast. My main computer is an iMac. I want a couple of MacBooks, an iPad2, and a Dell laptop to connect to the wireless network. First, will the 3300 work with these devices? Second, what do I need to do to set up the router? how do I connect the devices to the router?
View 1 Replies
View Related
May 8, 2011
I got a NetGear DGND3300 Wireless Router Modem 3300 Dual Band from eBay only to find it will only work in USA.
View 7 Replies
View Related
May 30, 2012
I tried to use my Netgear 614 router to my Netgear 3300 as an access point to gain range. But now I think I've screwed up the IP address(s) and have lost my wifi ability.
View 7 Replies
View Related
Feb 26, 2011
I cannot connect through my wireless router (Netgear WNDR3700) WITH MY INSPIRION DUO. I can connect with a verizon MYFI wireless card, and alo through ethernet on Duo. I get "Problem with wireless adapter or access point" The software driver is newest. System ism W7 Home premium
View 1 Replies
View Related
Nov 27, 2011
I have had the Netgear 3300 Dual Band for three years. Everytime I wanted to access using my laptop, I had to choose between 2.4G and 5G connection. For about a month now, the 5G does not show up. It doesn't show up as a network to select no matter what device I use. I have reset the router and updated the firmware. Both connection lights are blinking. I recently purchased and IPhone 4 and still I do not have the option of selecting 5G.
View 4 Replies
View Related
Jun 4, 2012
I puchased the N600 WNDR3700v3 Dual Band Gigabit Router. I am able to see my wireless account I set up and is out there to connect to, but I cant connect. I can connect with an ethernet cord, but nothing wireless. It doesnt work for my home or work laptops. Prior to this I had another wireless set up and I am tempted to plug that one back in.
View 1 Replies
View Related
Oct 26, 2011
I use both Gigabit LAN and "N" class WIFI through my WNDR3700 to connect to my Network. Can I use a Verizon MIFI4510L to connect to the Internet?
View 1 Replies
View Related
Jul 7, 2011
I have basically the following setup: It's a home network, running with a Netgear WNDR3700 wireless router.
Wireless Devices on the Network:
Google Nexus One: 802.11 b/g/n
iPhone (Original): 802.11 b/g
Main Workstation Laptop: 802.11 a/b/g
"Beater/Other" Laptop: 802.11g b/g
Ethernetted devices on the network:
Logitech Revue: CAT-5e
I'm running both the 2.4 GHz and the 5.0 GHz networks over the same SSID. The goal, obviously, is to get everything over to N if possible. I've heard that wireless N has much better signal and transfer rates, is this true? Also, is running the two different frequencies with the same SSID problematic? It's kind of strange, because my Nexus One is having a difficult time staying connected to the network in my office while the main workstation laptop in the same room is getting a much better signal.
[Code]....
What's interesting is that both are running on the 2.4 GHz networks, essentially both not on the wireless n network, which kind of defeats the whole purpose of things. Is it bad to run both the 2.4 and 5.0 GHz networks with the same SSID? If using a network repeater, is it bad to rebroadcast the original network with the same SSID as the source network? It seems that the 5.0 GHz network is getting "clobbered" by the 2.4 GHz network. Is it really necessary for me to broadcast using different SSIDs?
View 1 Replies
View Related
Jul 12, 2011
i set-up the D-LINK DNS 323 NAS unit with RAID 1 (dual 2-terabyte 5400 rpm drives)
it works, but it is slow in copying files between my computer and it (8 minutes to copy 7.94 gig file between NAS and my PC via wire).
i am using netgear WNDR3700 gigabit router. replaced the network wires to the latest spec, and my computer has realtek PCIe GBE network adapter.
this is looking more and more like the NAS RAID 1 is the bottleneck.. possibly 7200 RPM drives would have kicked more ass?
View 2 Replies
View Related
Feb 13, 2012
I was bought a Vostro 3300 couple months ago and with this, laptop dell dw1501 a/g/b/n wireless network card was provided.
I trust to Dell's specifications and replaced my DSL modem with a new high-end Wireless-N 300 Mbps DSL modem without thinking any compability problem. When I went to home and setup my new modem, my Vostro 3300 connected with only 72Mpbs. I tried to find a solution and find this community topics mentioned below. url...
As you wil see, the dw1501 wireless network card is not support this connection speeds even though the card is advertised as a wireless N card. Some users managed to replace their card with the better ones.
View 1 Replies
View Related
Jan 19, 2012
Just got my router running and when I connected to it via my laptop, it didn't ask for a password and it says unsecured connection when I put my mouse over it. Where do I go in the settings? I do not see it at all?
View 3 Replies
View Related
Jul 14, 2012
Currently my setup works fine except that I need another ethernet port.I have a E4200V2 with a HP laserjet 4000N printer connected via JetDirect ethernet and I am able to print with any of my devices.However, because I have need of another ethernet port, I am wondering if anybody has tried using a parallel to usb cable? The parallel side of the cable being connect to the printer and the usb side to the router.
Or if I really want that port made available, will I have to get some type of external print server?
I know that HP makes a JetDirect Card with a USB port, however, I don't want to spend the $80 on ebay to get a used one if a $10 new cable will work.
View 9 Replies
View Related
Sep 14, 2012
I have a Dell Vostro 3300 laptop with Windows 7 and ran a Kaspersky Virus Scan which deleted virus' and trojan programs but now my computer says there are 'no connections available'....my WiFi is definitely working as I am able to connect on my phone and other laptop.I have checked my network adapters on Device Manager and they have a yellow triangle with an exclamation mark, including 'DW1501 Wireless-N WLAN Half-Mini Card'. I have checked whether the drivers are up to date and it says they are.
View 19 Replies
View Related
Sep 19, 2012
After I had Prism high speed internet installed (made by Cisco) and I can no longer print using my Dell V313s Wireless printer. I have lost the driver disc that came with the printer and Dell wants to charge me a large fee for support and Prism states that they are not responsible for the printer not talking to the computer.
View 3 Replies
View Related
Apr 7, 2011
I cannot access the setup page, even without the modem connected to the router, even after pushing reset button. It says I have limited access both to the wireless and to the wired connections, but won't let me access the internet (via the separate modem)I can access the internet via the modem fine
View 2 Replies
View Related
Jul 27, 2011
I'm in a bit of a predicament. Trying to set up a Netgear WNDR3700 behind a SonicWall TZ170 SP (Standard OS). The only thing I really want the SonicWall to do is maintain site-to-site VPN connections to a few other networks that I work with.
The SonicWall WAN is passing Internet connectivity to the LAN ports as it is supposed to but the hangup seems to happen at the Netgear; it doesn't seem to want to receive Internet connectivity from anything but a modem and it doesn't want it going to any port but the Internet port (IE, it doesn't seem to want to share Internet via the switches).
I'm thinking this may be a limitation of the firmware and that dd-wrt might be the only answer but I thought I'd bring it here first as my last experience with dd-wrt wasn't a good one.
View 7 Replies
View Related
Nov 2, 2012
I have a Vostro 3300, which was working very well, and when I upgraded my OS from Win7 to Win8 my internet speed through wireless connection became very low, I checked for a driver update but did not find any that is compatible with windows 8. I also tried some old Windows 7 drivers with and without "compatibility Mode" but still not working. I should also mention that when I connect to the internet through Ethernet, I get the full speed.
View 3 Replies
View Related
Dec 23, 2012
I recently bought a practically brand new HP LJ P1006 with an extra brand new HP brand toner cartridge for $1 at a local auction. I have tested it, and it works perfectly, so all is fine there. I would like to know if it is possible to print wirelessly to it at all. I do not have it hooked up to a computer right now, we only have two laptops, so there is not a desktop to have it hooked up to in order to put it on a home network (I believe that is how that works).
I do have a Netgear N300 router with a USB port however, and I was thinking I may be able to do something there.
Is it possible to hook this printer into my router via USB and then be able to print to it from our latptops? If so, how would we go about setting that up to do so?
View 3 Replies
View Related
Jan 21, 2012
I am trying to forward the ports for several ip network cams, that have built in webservers, on this router. I have done this before on my old Linksys router with no problems but the Netgear has me stumped.The only way I can reach any of these devices from the Internet is to map them to port 80. But that limits me to one device, hence the need to forward more ports.All cams have fixed ip addresses so it is not an issue of their ip addresses changing.
View 19 Replies
View Related
Mar 3, 2012
My old router (a dlink dir-615) works just fine, but I figured I would upgrade and try to run OpenWRT or DD-WRT so that I could have one VPN for all my devices.
Anyway, I took the router out and followed the instructions (power off modem for at least 1 minute, connect modem to router, router to computer via ethernet, turn on modem first, wait for it to fully boot up, turn on router, wait for it to fully boot up, and then run the setup on routerlogin.net. The router is currently setup and I can connect my computer or iphone to it just fine, but I cannot access the internet. It doesn't make a difference whether I'm connected via ethernet or wifi. Either way, I get a "No Internet Access" message from Windows 7.
I've tried turning everything off and starting again. No luck. When I go back to my dlink router, everything works fine again.
So, in short:
Modem + ethernet = internet
Modem + Netgear router + ethernet = no internet
Modem + Netgear router + wifi = no internet
Modem + Dlink router (wifi...haven't tried ethernet) = internet
View 8 Replies
View Related
Mar 26, 2011
URL ,A Netgear WNDR3700 for only $80? Everywhere else I have looked they've been over $100.
View 2 Replies
View Related
Feb 16, 2011
I can connect to my LAN, but with local access only. I've been to the mfg's forums and tried their fixes, driver updates, and manual setups- no joy so I've reset to auto defaults. This laptop connects to several other routers wi-fi without problems. The WNDR3700 solved all my previous router problems, was truly plug and play, and may have cured me athsma as well. The event logs show a time-out during the semaphore portion of the log-in.
View 12 Replies
View Related
Jun 2, 2011
I have been unable to access my WHS when I recently traveled across the US. I have a Netgear WNDR3700 router. My DSL modem is a DSL-520B. I have AT&T DSL (6 Mbs). I have tried enabling and disabling "remote management", forwarding to ports 80, 443, 3390, and 4125 all with no success.Also, I believe (correct me if I am wrong) the remote management address is incorrectly listed as http://192.168.1.2:8080. I have also turned off USB storage in case of a possible conflict I have read about with port 80.
View 4 Replies
View Related
Oct 21, 2012
I have numerous phones and laptops that connect to the router just fine and fastThis ASUS laptop (windows 7) with Centrino N6150 is very slow to validate. At least it appears that's the issue. The icon in the tray starts with a ! in the connection, then in about 45 seconds goes to a blue chase circle, then in about 45 seconds connects.istory. I was getting disconnects from the WIFI router on a continual basis. I decided to put the router back to factory settings, did the pin reset etc, did a full setup and now we have this slow connect issue ALTHOUGH I never get a disconnect if I once get connected. Just seems to take forever to get it to connect.I've looked at conflicting IP's, no avail, seems fine. As mentioned, like the iphones connect almost instantly. The HP laptop connects fast (windows 7) but the asus now isn't happy.
View 19 Replies
View Related
Jun 22, 2012
I have had a Netgear WNDR3700 wireless router for over a year now, and have had no problems connecting to wireless devices (currently connects perfectly to: windows 7, OSX, Android, and Meego). I have recently purchased a Sony Bravia NX720, which has a built in wireless card. When I connect the television via LAN to the router the internet works fine, however when I connect via my wifi network (i.e. there is no physical connection between the tv and the router) I get the following message:
Connection Results
Wireless Device On TV: found
Local Access: OK
[Code].....
View 7 Replies
View Related
Mar 21, 2013
I have two computers(with problems over 15 that work fine) an All in one Sony that has a qualcom 9285 and a new l521x dell laptop with a dell 1901 (also atheros).I have these issues with the sony for a few years - and just wrote it off as a computer problem - we have had the sony tech come out and replace the entire motherboard, wifi module?what made me link the issue with Atheros and the router was that my new laptop is behaving the same way as the sony. They both show connected to interenet (windows 7 64 bit(sony) and windows 8(dell)) I get an IP address, and I can ping websites. If I click to watch the network traffic (on the local connection status activity) I can see 50,000 bytes received every second I have updated the sonys and dells drivers to the latest one both from sony/dells site and from atheros download site as well - but it doesn't seem to make any difference The router also states its fully up to date
Hardware VersionWNDR3700
Firmware VersionV1.0.7.98NA
GUI Language VersionV1.0.0.64
View 5 Replies
View Related
Sep 10, 2011
I have a Netgear WNDR3700 v2 that I loaded with dd-wrt (v24-sp2 std). The only real problem that I am having is with the wireless. I can't get anything to connect at 300mbps. Even if I set it to n only it still only connects at 54mbps. Right now I am running it with encrytion off to rule out that causing any problems. and yes it would connect at 300mbps with the stock netgear firmware.
View 3 Replies
View Related
Jan 11, 2012
I've been replacing my Netgear WNDR3700 (currently only serving as wired router and gigabit switch) with an Untangle box.Obviously, only the free "Lite" version would be worth it, as the others are priced ridiculously for non business use. I've had a hard time figuring out from their webpage how the features of the "Lite" compare to the others, particularly how Spam Blocker Lite, Web Filter Lite and Virus Blocker Lite compare to the full versions of each.
Is the untangle router any good? How do its management features compare with consumer solutions?The new web caching feature seems really cool too, especially when multiple systems grab the same large updates or download the same steam games, but at $54/year it seems a bit excessively priced for home use, so I'd probably just be sticking with the base free version.
View 19 Replies
View Related
Oct 31, 2012
I have Comcast cable and prior to a couple days ago, it has always been smooth @ 36mbps download and 5mbps upload. I have a Netgear WNDR3700 and Motorola 6121 connected to my PC via Ethernet cable. Up until a couple days ago, I've been getting lag spikes where my games would completely freeze for a good 2-3 seconds and resume, as if the entire connection dropped and reconnected. I did a speedtest and I was getting around 4mbps download and 1-2mbps upload with huge fluctuation in speed.
I called Comcast and they said they were seeing a "red" signal error from their end so they sent out a tech to my house. He came over, changed some cables outside because they were corroded and that's about all he did. I tested my connection while he was still there and I was again getting 36mbps download and 5mbps upload. It was a quick 1-2 test so everything seemed normal until I started to see lag in games again.
I am getting the same lag spikes, albeit it's not as bad as before but it's still pretty annoying. Using speedtests, I am still getting 36mbps download but the graphs show that there are inconsistencies where there would be sudden drops in speed and picks back up still to show 36mbps. These drops are what I assume are the lag spikes. The upload is also suffering now, dropping down to 2-3mbps and it takes the test about 20-30seconds to load the upload portion of the test. Even loading web pages, sometimes it locks up for a few seconds longer than it should, which is normally instantaneous.
I have tried connecting my PC directly to the modem to bypass the router and am still getting the same lag, probably a little LESS but still the lag is there. My router is has always been updated to the latest firmware.
View 4 Replies
View Related
Feb 20, 2012
Can I use wireless USB g netgear adapter with wireless n belkin router
View 1 Replies
View Related
