I would like to know if the Killer 1103 is compatible with the XPS17? I know the XPS has 3 antennas so is it just a matter of whether the bios will recognize it?
Dell XPS 17 3D 120Mhz LCD, 2860QM, Nvidia GT555M 3GB DDR3, 16GB 1333 Mhz DDR3, 120GB HyperX SSD, 500GB HDD
I have been trying to update my Killer-n 1103 card and Killer Network software. When I downloaded the recommended driver from their site and tried to install it it said to uninstall the old drivers/software which I did. Now when I try to install the new software it says there is no compatile hardware. This happens for the Dell recommended drivers as well.
View 2 Replies View Relatedsome days ago a technical Dell replace on my XPS17 L702X the fan because more often, while I was working, fan get started (noise, decrease in performance, and so on ...). After some hours my laptop dies, I found it tourned off and it didn't start again. So, afert two days, another technical Dell changed XPS17 's motherboard and the power connector. The same day I worked with my notebook without any problemes, but at the end of my workday I shut down the system (Windows server 2008) and It restart automatically. I tried again more than once, but at the end my laptop restart automatically again (I have two partitions: Win 7 and Win 2008 server Both OS has the same issue: automatic reboot afert shut down). This morning I turned on my laptop and immediatelty I shut it down and It dind't restar, during the day while I was working, sometimes I turned it off and all seems ok, but this evening (after a workday and after backup) it restarted automatically again after shut down !
View 1 Replies View Relatedi was poking around steam when i lost connection to the network, when it came back it was limited connectivity. now its 3 days later and i've been trying everything i can think of to make my wireless card work again from recovery to reinstalling drivers. all the troubleshooting can say is it might be the drivers, still might be for all i know but those didn't seem to work like i said. is there a chance im just being blocked by the network? its one big public network thats shared by the whole base.
View 5 Replies View RelatedIt’s just that I had it with Bluetooth in it in my Alienware Mx14-R2 and for some reasons now the Bluetooth doesn’t seem to work.Not I can find the driver in the device manager also., Before I use to use it but now it’s creating problem and it’s just the Bluetooth that doesn’t seem to work.
I did notify Alienware team about it and they did the online conference GO Assist and they did re-install the whole software but there seems to be problem still.I thought it’s better to ask the experts who made the device. I was also told if it doesn’t work that I could just do the factory settings that came with the alienware.
It's gotten to the point I have to uninstall and reinstall every restart.
View 1 Replies View RelatedI want to know which of these Bluetooth module is compatible with Dell Latitude D630: 360, 365, 370, 375, 380.
View 1 Replies View RelatedMy Dell workstation will only see my Dual Band Router at 2.4gig and will not see the 5.0gig. Is this card capable of seeing above 2.4?
View 5 Replies View RelatedI have a 2 year old v305w printer i want to use with my new imac and ipad. Its perfectly good and dont want to throw it out. Are there drivers available to make this compatible with air print on my ipad and imac?
View 2 Replies View RelatedI have Dell Inspiron 1525 laptop, which I bought 3.5 years back. The laptop used to work fine before. I just shifted home 1.5 month back. Previously I used to have the wireless router always close to my laptop, so I never realized this issue. Now the wireless router (802.11n) for Fibre optics internet is in the ground floor and my studio is on 2nd floor. In my office latop, which is a new one, I get 3 out of 5 signal bars and get 34-56 mbps signal. But my Dell laptop does not get any signal, but when it is closer to the router it works fine.
if I buy an USB network Adapter device which is n series and supports upto 300mbps signal, then will it improve the situation? If yes, then which devices are preferred and how can I know whether that new device is compatible with my laptop settings (as this is a bit old one) or not? If not, then how can I improve the wireless reception? I have tried with booster etc already. I have also updated the network adapter drivers.the wireless card I have is: Dell Wireless 1395 WLAN minicard?
tell me if the Dell 1502 wireless n mini-card will function on a wireless network working on a/b/g bands?
View 1 Replies View RelatedI'd like to get a new WWAN card for my Dell XPS 1340 - currently there is 5530, though now I would like to put 5550 or 5560. I have read couple of threads on dell forums, other forums regarding the drivers availability and compatibility, however I haven't noticed any for 1340. Even though mentioned cards are not officially available for this model?
View 2 Replies View RelatedI have a Killer Nic 2100 installed on an 1155 setup under Windows 8. I can upload large files to anywhere on my home network .. but when I pull large files off of my main computer with the Killer Nic in it .. the connection drops out on my main rig... no network connection of any kind on my main rig until I reboot ..
I don't have this problem with the onboard nic ..
sometimes the network will drop when the power flutters .. all the other computers I have will have internet connection .. but my rig won't ..
i just got a sager notebook for college and i just received it. i just opened it out of the box and was unable to connect to wifi. My other computer and iphone are working fine on it. My wifi shows up i am just not able to connect to my internet. ive tried to download drivers and reinstall them.
View 1 Replies View Relatedi want to pick a 3g gateway HUAWEI B683 Router for my official use, but my computer is running for Mac OS, i don't know whether it is compatible with my Mac OS or not,
View 1 Replies View RelatedI am trying to connect a second desktop computer running Windows 7 to a linksys wrt160nv3 Router. The router is currently connected via Ethernet cable to a desktop running Windows XP. I tried to connect the Windows 7 computer to the router via an Ethernet cable, but that does not seem to work.
View 1 Replies View RelatedIs Huawei usb modem EC159 (ISP : Reliance Netconnect+ ,India) compatible with ASUS RT-N56U and Linksys E3200 dual band routers?
View 1 Replies View RelatedMy carrier is dropping off a single mode fiber on LC connection 10gig port but on myrouter I am using XFP-10G-MM-SR modules. Can I still use a SMF to connect from handoff to this router or do I need a different module?
View 3 Replies View RelatedWe have LMS 3.2.1 and WLC version 7.0.116. I want WLC syslog to be managed by LMS. How can i acheive that..? Any special package need to app d for LMS ..?
View 4 Replies View RelatedWe have LMS 4.0.1 with 300 devices license and we want to upgrade it to 4.1, pls. let me now if it's free or any cost is assocated with it.Earlier when we directly installed LMS 4.0 license on 4.1, it was not accepting.
View 1 Replies View RelatedThe ISE compatibility Matrix (June 5, 2013), does have a row for WLC 5760 in its tables.
The WLC 5760 Release Notes says it is compatible with with ISE without specfying which features. Why is the WLC 5760 missing from the ISE Compat Matrix and how can I get specific ISE feature support (ie CoA, DACL).
I am trying to build a site-to-site VPN between cisco 1811W at a main office and SRP541W at a remote office.
I already have the configuration for the 1811W through SMD, but can't install the SDM on the SRP541W.
Does the SRP541 is compatible with SDM; and if not is there any other GUI to configure a VPN tunnel on SRP541.
Running a small office and my Internet comes in via a Netgear DGND3700 wireless modem router. It has to be in a seperate room to the office so I have run a network cable to connect. I have a Brother network printer and 2 Macs which need to be on the same network. I own a small netgear FS105 but when I put it on the end of the ethernet cable from the router and connect everything into the switch nothing can get IP addresses from the router, which has DCHP on.If I plug the printer direct, it works and the macs work wirelessly.
View 5 Replies View RelatedIs there any way to provide QoS using Cisco Routers and switches and MCafee FW? ( I don't mind the model of the devices, I just need to know if there's a posibility).
View 5 Replies View RelatedI would like to know whether CSM 4.3 is compatible with ASA version 9.1(1). Any appropriate url that contains information about these two version's compatibility?
View 2 Replies View RelatedSince we have now got a go for upgrading the IOS I have a little difficaulties finding if the current IOS will upgrade correctly to the advised version without any loss.Current version is (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(18)SXF7 In the realease notes for IOS 12.2(33)SXJ I can't find any upgrade matrix or upgrade train.Will this version upgrade without causing any mishaps on current WiSM(ver.1) and switch config?I didn't get any adequate answer, but since NO ONE did mention any repercussions, we did the upgrade......and we did loose configuration !Still the WiSM (version 1) is working all right, but where did the related WiSM configuration go?.How can you do a span session if you have no interface to tie onto?
View 7 Replies View RelatedI know that N operates on both 2.4Ghz and 5Ghz, whereas AC operates only on 5Ghz. Yet many AC routers advertise as operating on both 2.4Ghz and 5Ghz. So what happens when you connect to an AC access point on 2.4Ghz? Does that operate using 802.11n?
What happens when you try to connect to an 802.11ac access point using an 802.11n client on 5Ghz? Is this possible, or are legacy connections only possible at 2.4Ghz?
I have a Netgear WNDR4500 (802.11n, dual band) currently that I am very happy with. I figure I will eventually switch over to AC. I'm trying to determine if I would be better off simply replacing the N unit with an AC unit, or running both (perhaps WNDR4500 to handle 2.4Ghz clients, AC access point to handle 5Ghz clients, or similar).
Transceiver integration within Cisco 3945.I need to supervise the DOM (Digital optical monitoring) capability of LX laser integrated within CISCO 3945.But after study of the Cisco DataSheet on transceiver module compatibility:
[URL]
I've seen that the SFP-GE-L model which supports DOM cannot be integrated within Cisco 3945.As specified in the datasheet, the only model of LX lasers compliant with CISCO 3945 is GLC-LH-SM (without DOM).However, after study of this datasheet, I can see that Cisco propose this Tranceiver model with DOM capability: GLC-LH-SMD But, so far I can't figure out if this model (GLC-LH-SMD) with the DOM capability is supported on Cisco 3945 and can be monitored through monitoring tools? If not, is there an other alternative to supervise the DOM capability with transceiver (LX) to be intergated within Cisco 3925?
I have a Linksys WRT54GL wireless G router and I just brought a Roswell Wireless N card. would these two items be compatible with one another? or would I need a new router/adapter?
View 4 Replies View RelatedWe have cisco ace 30 modules installed in cisco 6500 switches. For application availability purpose from the internet, we need to have some global site selector/3rd party devices with similar feature set that of cisco gss.
whether cisco ace is compatible to ge tintegrated with other 3rd party devices like F5 GTM?
I have 3 WLC's currently running version 7.0.116 and a WCS on version 7.0.220. I am looking at upgrading the versions and am uncertain as to the compatibility.
1. Upgrade the WCS to 7.0.240, and upgrade the WLC's to 7.3. Resulting in my WCS just not able to manage the "new features" in the latest WLC code?
2. Upgrade the WLC's to 7.3 resulting in WCS completely unable to manage the WLC's? I am aware there is WLC 7.4 code however I've read there is an issue with 1142 AP's rebooting.
I have inherited a 3945E router with an NM-8CE1T1-PRI card installed in slot 2 using the SM-NM adapter card. The command 'card type E1 2' has been issued but I only see interfaces Serial2/0:0 to Serial2/0:30.
Since it as 8 port card I was also expecting there to be
Serial2/1:0 to Serial2/1:30
Serial2/2:0 to Serial2/2:30
etc etc.......
Serial2/7:0 to Serial2/7:30
The router will not allow me to issue a sub slot number with the card type command.
Am I missing something in the configuration or is there an issue with this card and router combination? The show inventory has the following:
NAME: "Network Module Adapter for SM Slot on Slot 2", DESCR: "Network Module Adapter for SM Slot"
PID: SM-NM-ADPTR , VID: V01, SN: FOCxxxxxxxx
NAME: "8 port channelized and PRI T1/E1 NM on Slot 2", DESCR: "8 port channelized and PRI T1/E1 NM"
PID: NM-8CE1T1-PRI , VID: V01 , SN: FOCxxxxxxxx
It doesn't give any errors when booting up and the router is running c3900e-universalk9-mz.SPA.152-1.T.bin IOS.
I'd like to deploy ISE on my network and I have two big 4500R switches : a 4510R and a 4507R. A Cisco vendor told me that these last are incompatible with ISE and that I need to buy two 4500E. When I see the price of those products i'm a bit suspiscious, since I've read on that page : [URL]
Device
#Minimum OS Version
#MAB
[Code]....
The only thing is that the minimum RAM for the version 12.2(54)SG1 is not present because it's 64Mb and those models have 32Mb. If I buy RAM and update IOS, will ISE work properly on those devices ?