Direct Connect Works But Not Through Router
Jul 17, 2012
In my hotel, it is currently running a free internet, through ethernet port/cat5 wire When i plug the wire into my port, the internet works fine, as i am sending this message now, However, when i plug the cable into my router, and i try to connect to the internet, it gives this message through chrome Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS I'm currently running through the google free dns, i've cloned my mac address direct connect works, however router does not.
IPConfig Logs, direct connected to the internet through wire and connected to the router.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsLarry Wong>ipconfig /all
[Code].....
View 3 Replies
ADVERTISEMENT
Apr 12, 2012
We have FIOS at our home. All the wall connections for ethernet are wired to the control panel in our house which are then connected to a wired router. We have another wireless router in the upstairs which gets internet through the wall port and it works fine.We had another downstairs wireless router in the living room that was working fine as well, but I reset it for certain reasons and it no longer works properly. All the proper lights light up: internet, port, power but the computer can only connect to the network and not the internet for some reason.
View 9 Replies
View Related
Jul 23, 2011
Just updated my DTV to a HD receiver which has the ability to access movies/shows via internet so I hard wired my belkin router to the TV receiver and I can't get it to connect. The router light does not go on showing me I am not connecting to the TV receiver. When I go into the DTV receiver it reads all my IP address and has an OK behind them, but says there is an error and the internet is not connected. When I plug the same cable into my PC or my laptop the light on the router does come on. Also my iphone does receive WIFI via the same router. I called DTV and they said everything on the receiver is correct. I called my router folks and they said everything is correct and that it must be the DTV receiver. I've been using this router for several years and their tech guy sounded like he knew what he was doing. how I can get the router to recognize the TV receiver?
Here are my router settings: I used the WAN IP info in my TV receiver. Home| Help| Logout Internet Status: Connected LAN SetupLAN SettingsDHCP Client ListInternet WANConnection TypeDNSMAC AddressWirelessChannel and SSIDSecurityUse as Access PointWireless BridgeFirewallVirtual ServersClient IP FiltersMAC Address FilteringDMZWAN Ping BlockingSecurity LogUtilitiesParental ControlRestart
[Code].......
View 8 Replies
View Related
Oct 24, 2012
i want to transfer files, remote desktop, lan gaming....actualy lan gaming works fine without doing anything just connecting the cable
but how do i transfer files and remote desktop....what software do i need?
note:
pc1 windows 7
pc2 windows xp
View 8 Replies
View Related
Feb 10, 2012
I just purchased one of each of the above, both with 1ea WIC 1DSU-T1, and would like to connect them directly to each other in a lab scenario. Do I need to have an RJ48 cable or will an RJ45 work? I have them connected now, but they are not seeing each other. They are connected via S0 on the 1721 and S1/0 on the 1760.
View 5 Replies
View Related
Mar 16, 2011
I have a Gateway desktop computer easily connected to an internet providing modem from Comcast. I have tried to set up a wireless router so that I can connect my Sony laptop, but have not succeeded. The laptop has a built in wireless device that easily connects to other wireless routers such as the one in my parent's house or my sister's house, just not the one in my own place.Connecting the laptop to the wireless router seems to be accomplished. The laptop says it has been connected and signal strength is "very good" but web browsers are unable to connect to the internet. I have tried three separate web browsers (firefox, internet explorer, and google chrome) and still nothing.The router seems to be working fine. It is a netgear N150. Power is on and the desktop, connected through the router, and then into the modem, connects just fine. This tells me internet connection is alright through the modem, right? I have tried numerous times to turn off the power and wait, then try connecting again and have not succeeded. I have done this at both the modem and the router.
I have gone into the laptop's ip settings and have marked the ip and dns addresses to automatically receive. I believe a great deal of the problem is that the laptop is not receiving any wireless bytes being sent out. I've seen the sent bytes between 84 and 378 (is this low?) but nothing is received. If I could figure this part out I feel I'd know what's wrong. The IPv4 IP address is 192.168.1.3The IPv4 Subnet mask is 255.255.255.0The IPv4 default gateway is 192.168.1.1The ipv4 DHCP server and DNS server read the same number as the default gateway.Not that I know much about these numbers. Every time the problem is encountered I strike the "diagnose" tab but to no avail, as though the laptop refuses to even try to diagnose. I have attempted to get new IP settings and reset the network adapter but the laptop, and though I receive a "repairi
View 12 Replies
View Related
Jan 7, 2011
I have a new router (ASUS RT-N10)and It is asking me to direct connect my cable modem to my computer, and then find my MAC address via command prompt, and clone it to the new router.I can get to my command prompt, the problem lies in windows 7 and vista's (or mine) inability to realize that my network card is directly connecting to the modem. (No internet connection available, doesn't think anything is connected). I have tried on multiple machines to try and find my modem's mac address but it simply is not working.I want to know if I can find the mac address through the old router, or what I need to do to have windows 7 recognize I'm directly connecting the modem to the PC.
View 3 Replies
View Related
Dec 2, 2012
I have CentOS and the application I am running does not listen on 192.168.1.5 (Private IP address). Right now I have connected using bridge mode and I can see in my network configuration-> ppp and eth0. PPP has public IP and eth0 has private IP. Is there any way that I can get public ip assigned to eth0? I do not have Static IP, I want to use the public dynamic IP assigned by my ISP to use in eth0 interface.
View 2 Replies
View Related
Apr 15, 2011
Is it possible to access the internet directly using the provider's hdmi cable routed through a generic device?
View 3 Replies
View Related
Dec 20, 2011
I've just got my first ever router from talktalk, DSL 2780 which works fine but I still can't connect to the internet. I called the helpline and they checked my broadband connection is working fine and all the cables are correctly connected. Then she got me to open Internet Explorer and type in 192.168.1.1 but it brought up a page saying that it couldn't be displayed and there was no internet connection, so she told me to make sure the Work Offline option wasn't ticked and did something else in Tools Internet Options and then typed those numbers again but it still didn't work.
View 11 Replies
View Related
Mar 23, 2013
A bit of a straight forward question, is it possible to connect a 5505 to a 5510 direct via a crossover or do you need a switch inbetween capable of trunking?
View 1 Replies
View Related
Jul 17, 2011
I cannot connect my Dell Inspiron 1300 through the NetworkManager "wired" connection, when I try to go direct to the cable modem. It fails to connect. If I connect the cable modem to my (linksys WRT54GS) wireless router, and then connect my laptop to a wired port in the router, it connects in seconds, successfully, This has happened to me 2 other times, when I tried to connect my laptop to a client's cable modem, because my client did not have a wireless router available, in their home. My wireless works fine. This has me perplexed. I'm using Ubuntu 10.04 LTS and NetworkManager Applet 0.8, I've tried some things to see what is going on, such as "ifconfig" "dhclient" as well as modifying the "Auto eth0" parameters and adding my laptop's MAC address, etc.
View 5 Replies
View Related
Jun 4, 2012
Will not connect to the internet wired or wirelessly. It does turn on however. Not ISP or modem, because when comp is plugged in directly to the cable modem, internet connection works fine. I'm using a Comcast cable connection.
Router is Netgear-N 150 router wnr1000 version 2.My antivirus software is Malware bites, and when I ran it, it didn't find anything.
OS is windows 7 home premium 32 bit.Here's IPconfig:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:windowssystem32> ipconfig /all >c:ipconfig.txt
C:windowssystem32>ipconfig /all[code]......
View 14 Replies
View Related
Aug 20, 2011
I am trying to remotely access my PC from my HP Touchpad. I have program to do that but my public router is blocking access. The program says to redirect that router to port 5900. Since it is a public router I can't find how to access the public router to redirect it.
View 3 Replies
View Related
Oct 3, 2012
Lost Internet connectivity at home. connected via dsl line to my isp.when i issued ipconfig /all command i noticed that default gateway IP addr was a global ip addr. (77.36.x.x) instead of the usual private address 192.168.1.1. DHCP server had IP address 58.206.x.x when i issued ping 192.168.1.1 command, i got this output: "reply from 77.36.x.x: destination host unreachable" i couldn't access my router's configuration menu by typing 192.168.1.1 in web browser's address field.it's very interesting, because i had network issues before but could access my router's config menu and ping it. but now, i cannot reach my local router but receive reply from ISP's router.
View 10 Replies
View Related
Dec 11, 2012
I am trying to use the directv ipad app to watch/control my directv service. I am not able to see the DVR that is on my system. It is plugged directly into the router and the other receivers (and ipad) are wireless connecting through the same router.Direct TV says:
"For added security, some brands of routers treat Wi-Fi as separate from an Ethernet cable connection within the same router. If your HD DVR is connected to the router by Ethernet cable, and the iPad to the router via Wi-Fi, they may not see each other. Check your router manual as you may need to configure your setup."Can someone tell me if the WRT160N considers them as two separate networks when connected via wireless vs plugged in?
View 3 Replies
View Related
Mar 15, 2011
we have cisco sr520 adsl router at one of the sites. A device is connected to the LAN and needs to be communicated directly to the server with 3rd party over internet. we have a static public IP( a.b.c.d) for cisco router and want this IP redirected to the LAN IP address(192.168.1.20) of the device but locked to only 2 inbound IP address (eg.-1.2.3.4 , 5.6.7.8) .
View 1 Replies
View Related
Aug 8, 2011
I have been using a WRT610N router for several years. A couple of weeks ago I purchased an iPad 2. I am not sure if its a limitaion of the iPad 2 or a wireless connection speed issue, but when watching You Tube music videos the video stops frequently and I have to hit the play button again to resume. This occurs more often if I am using Blue Tooth connected headphones than direct connected headphones, leading me to the initial conclusion that I am witnessing the limits of the iPad 2 processor. However, I recently downloaded the Speed Test app and have discovered that the wireless download speed varies from about 11-15Mbps, depending on the location (normal vs next to router). If I go to that web site and run the speed test there from my direct connected PC (connected to 1Gbps port), I get a download speed typically of 36Mbps (inflated I know because Comcast speed supposedly is limited to 25 Mbps).
View 2 Replies
View Related
Nov 8, 2011
Have high speed cable and find that the wireless speeds using Speedtest.net are faster than when hooking directly into the E4200. Do I have something set incorrectly?
View 3 Replies
View Related
Oct 9, 2011
Connecting with a LAN cable to the router works 100%, and I can get access to the router's IP-address, but when trying to connect to wireless, it asks for the WPA key, and I fill it in, but then gives an error saying "Can't connect to wireless network: *network name here*" (This is translated from Dutch to English, so it might be a bit different on an English computer).
View 3 Replies
View Related
Jun 15, 2012
My lap top is windows 7 , I have dsl , HP it will not connect , I have restored 2 times and still wont work.
View 3 Replies
View Related
Apr 7, 2012
I can't seem to connect to the internet via the Ethernet port on my laptop, but the built-in Wi-Fi card works perfectly fine. I normally use Wi-Fi, as our signal is very strong, even if I go outside and up the road, I can still connect.
My issue is that although I don't need it, I'd like to setup Ethernet for the first time since installing Windows 7. I've had Windows 7 since April 2011, and prior to that I used Windows Vista. From memory, I don't think Vista had any problems with connecting via Ethernet back before I moved house, but this was over two years ago.
My laptop is an ASUS X58L, and the NIC identified by Device Manager, is a Realtek RTL8139/810x Family Fast Ethernet NIC. Going into the properties, I can see that I have the latest Windows 7 driver installed - 6.111.723.2009, however prior to this I had the driver that came with the machine (when it was running Vista), which was 6.108.331.2008 and tried updating from Device Manager, but for some reason it said that I had the best driver already installed. To install the 2009 Windows 7 driver, I had to manually download it from Realtek. With either of the drivers, connecting via Ethernet doesn't work, and I'm confused as to what to do next.
View 13 Replies
View Related
Jul 7, 2011
A few days ago i tried logging onto to League of Legends, and my net disconnected. Thinking nothing of it, i reset the router and tried again, to no avail. Then for the last few days i can't get on skype, LoL, or any other program that uses the internet. I can get onto websites and such( using firefox) except i can not load youtube videos, otherwise my internet disconnects for a minute or so.
View 1 Replies
View Related
Dec 20, 2011
I've just got my first ever router from talktalk, DSL 2780 which works fine but I still can't connect to the internet. I called the helpline and they checked my broadband connection is working fine and all the cables are correctly connected.Then she got me to open Internet Explorer and type in 192.168.1.1 but it brought up a page saying that it couldn't be displayed and there was no internet connection, so she told me to make sure the Work Offline option wasn't ticked and did something else in Tools Internet Options and then typed those numbers again but it still didn't work.
View 3 Replies
View Related
Feb 5, 2011
I am having trouble connecting to the internet, but not my network, when I assign a static IP to my machine. However, when it's set to DHCP, it works just fine.
Pertinent info:
-I'm connecting to a Linksys WRT610N router via a wireless USB adaptor, Netgear WNDA3100v2;
-Service is Time Warner Roadrunner cable;
-There is no IP conflict as I've got DHCP range set from .200-.249 and this machine's static is .100;
-All the other devices in the house are on static starting with .101 up and they all work fine, both wired and wirelessly;
-Can see and connect to all devices in the LAN, including the router, but nothing outside
View 5 Replies
View Related
Feb 9, 2013
my computer just randomly stopped connecting to the intenet. I checked my other computers and phone and found they were all working fine. I was having internet problems pior to this happening (internet was being very slow and some web pages and some videos wouldn't load. I think the latter had to do with flash player though.) I had also been doing some stupid stuff on my comp that I know can give you viruses. Furthermore I also knew that due to previous virus's I was not able to do a restore. So as you have probably gathered my computer was pretty buggered even before this problem. So decided to restore to factory default using some backup images I made when I first got the comp. That went smoothly however the internet stilll doesn't work unless I plus it in using a ethernet cable.
View 9 Replies
View Related
Aug 30, 2011
I moved to a new place, with a new internet provider (a dorm, so it's all public). In my old place, my PC worked fine (Windows XP), but now it fails to connect to any of the Browsers. My laptop (Windows 7) is fine though with the same cable. No problems at all.
View 9 Replies
View Related
Mar 31, 2013
Cold start it will not connect to internet but the other computers I have do so I know it's not an internet connection issue.
Network Diagnosis fails to find anything nor does it make an internet connection. I only seem to make a connection on restart.
Win 7 64bit
View 1 Replies
View Related
Mar 19, 2012
How to connect N76 bluetooth headset to a laptop, works with handset (cell phone)?the laptop is not seeing the headset when searched
View 1 Replies
View Related
Jun 7, 2010
Just installed an E3000 in my house. All wired PCs are working fine on the network, and my BlackBerry connects to the wireless signal just fine. I got an AE1000 for my laptop. It installs fine, sees the wireless signals (secure and guest) fine, but it simply won't connect to the E3000 either using the Easy Key I created with the Cisco Connect software or by manually entering the WPA2 passphrase. The WZC window that shows the networks tries to connect and then fails with no error message. Using the Cisco Connect software to do the same task also fails, and after entering the passphrase manually there, the error message is:
Error description: Invalid Key Xml
Model name: AE1000
Operating system: Windows XP SP 3
Software version: 1.1.10049.0
Also, I can find nothing on the laptop since installing the adapter that allows me to switch between the dual bands. Since that was one of the main advertising points for the AE1000, how do you control which band it's using?
View 9 Replies
View Related
May 29, 2012
The animation school I work for is going to change names soon. The website already reflects the name change. The CEO wants all current emails changed to fall in with the proposed change as well as changing the school domain. Currently the system works fine as it is and I am of the opinion that changing the internal domain name space will have no effect whatsoever on people outside of the organisation. If there is no need to change things, then possibly re-directing emails internally would mean minimum fuss to daily operations within the school. Has anybody found themselves in a similar position and what was the outcome?
View 7 Replies
View Related
Jul 21, 2011
I put a new windows on my computer froma cd and now i cant get internet directly from my modem to decktop what to do to get it back.
View 1 Replies
View Related
Aug 3, 2011
So from a security standpoint... PPTP through Windows RRAS then RDP to the server?,Open port 3389 to the server and rdp direct? would think that having a VPN out front would block people from attempting a connection, but if the VPN username and RDP username are the same, I feel like its about the same.
View 7 Replies
View Related
