Have Set Up Belkin Wireless Router But Cannot Access Internet Wireless
Nov 2, 2011I have set up a Belkin wireless router but cannot access the internet wirelessly
View 1 RepliesI have set up a Belkin wireless router but cannot access the internet wirelessly
View 1 RepliesI have a Belkin G Wireless Router which until recently, apart from a few signal drop-outs, was working fine.A couple of weeks ago, I tried to connect to the internet but despite the icon on my netbook showing that my Wireless Network Connection is connected and has excellent strength, I am unable to open any webpages etc. I tried re-booting the router but it is still not working.
The modem is working fine as I am able to access the netbook if I plug my netbook into it directly and I don't think it is an issue with my netbook as I have the same problem if I try to connect my HTC Smartphone to the internet through Wi-Fi too, eg recognises signal but cannot access pages.The router was permanently plugged in and turned on which I have since heard tends to burn them out so I am thinking it might be an issue with the router.
My computer sees my network, but I can't connect to the internet wirelessly. If I plug in the Ethernet cable from the modem I can access the internet. So, I've narrowed this down to something with my router.
OS: WIN7
Router: Belkin N750 DB N+
Steps taken:Modem and router have been shut down and restarted.Router has been returned to factory settings and reconfigured.Validated with my ISP there are no issues with my internet service. Router software has been uninstalled, reinstalled I do not use McAfee. I've run a full virus scan, a full malware scan and just for good measure, a defrag. I've checked my firewall.
i m using belking sufr n300 but i m not able to access internet. if i connect brodband cable directly to computer then i am able to browse.
View 1 Replies View RelatedMy Belkin "ADSL 2+ Model with Wireless G" router suddenly stopped allowing wireless access this afternoon - right in the middle of use - although the wired connections to that router still work fine. No settings seem to have been changed on the router, and I'm the only one with access. Two phones and a laptop that normally work fine just won't get an connection. The laptop - running windows 7 - says the configuration saved did not match what the router was asking for. I tried another computer that doesn't normally connect by wireless and was prompted for a WEP key - which is odd because the router is configured for WPA/WPA2 AES access with a 9 character pre-shared key. After trying a key unsucessfully I haven't been able to get that prompt up again.Meanwhile I've gone into the router settings and it's definitely set to ask for WPA/WPA2. There are some WEP keys specified if I use the drop-down menu to select WEP, but I can't get any device to prompt me to enter one now.
View 5 Replies View RelatedMy neighbor is using my Belkin Router the basic one and has comcast. We both use his internet and have had no problems until the past 3 days. He just got the home phone service from comcast and the phone line is setup through the modem. Ever since comcast came to his apartment and set this up the home phone service to his modem the router is connected but there is no internet access. What is going on and how can I fix this. He has an HP with windows Vista and I have a Toshiba Satellite L675 that has Windows 7 Home premium edition on it.
View 1 Replies View RelatedI've just replaced my crappy TalkTalk router with my Belkin F5D9630-4 (v1001) to try and give myself a bit more wireless coverage in my flat. No matter what I try I just can't get the router to connect to the Internet.I've updated the router to the most recent firmware, and entered the following settings in my setup for the router:[CODE]
View 11 Replies View RelatedJust purchased a Belkin N600 DB N+ Wireless Router because the wireless on my Actiontec PK5000 really isn't so great. When I hook up the router to my modem and after running the install CD I couldn't get connected to the internet. So I looked at my modem and noticed the light where I had plugged in my router VIA ethernet wasn't lit up like the rest of my ethernet ports even after switching them around.
View 6 Replies View Relatedhave netgear pcmcia card need to connect to new belkin wireless access point.
View 1 Replies View RelatedMy N300 Wifi Range Extender does not let me connect to Internet. I can access other systems connected on the main WIfi network, but I cannot access Internet.I observe as well that all systems connected to the Extender appear, from the main Wifi network, having the same Mac address. I believe that my ISP (Telenet) does not accept that, and that this is the reason I cannot connect to Internet. Is there any way to change that behaviour ?
View 9 Replies View RelatedEarlier today I put in a password for my Belkin_G_Wireless_CC7A57 router. I had to change something, im not sure what it was. it was like WPA or WAP. now it wont let me go to my router settings 192.168.2.1 in the address bar is how i have been getting to it. now it just takes me to a OOPS google chrome cannot open this web page..... I just want to restore the router to it factory default settings. it will let this laptop on and another one in the house but not an older one we have which runs Windows XP. If i can get to my router settings i will be fine..
View 2 Replies View RelatedBelkin N450 Router. I want to restrict Internet access completely but allow LAN access to a shared drive for a particular computer on my wireless network. I have gone into the web based set up page and under access controls have enabled and added this computer to the list. I have blocked http, https, ftp and nntp. I don't know if this is enough. The reason I am asking is that I am in Iraq right now and I want to allow my fellow team members access to the wireless for using viber on their iphones but one cat even though he has hardwired internet wants to continuously suck off my wireless for his computer to download stuff since I paid for faster internet. I am trying to do this quietly and still allow him access to the shared drives on the LAN. Sooooo If I block him just outright will he still have access to the drives or do I need to pick and choose like I did above and if I need to pick and choose did I miss anything other then pop3 email and imap?
View 2 Replies View RelatedWhen using router to feed signal to Apple TV the PC connected to the router loses signal. Using belkin router model F5D8236-4 v2
View 1 Replies View RelatedInstalled new N600 router and every box in the house can access the internet - except for my Vista powered laptop. My network shows up as Unidentified network with 'locla only' access. Ben scouring message boards all day. Can't find a solution at Microsoft.
View 3 Replies View RelatedBelkin N750 Router - wired connection can not access Internet. I've tried direct to modem and have no problem, have tried old router, no problem, but if I shut down desktop completely (Win7) and restart, I get no connection. Uninstalling the NIC (Intel 82579V Giga) and restarting, then I get connection again. However, if I start in safe mode with networking, I have no problems at all. I've disabled my firewall to no avail.
View 3 Replies View RelatedCan 2 N300 wireless bridges be connected to the same wireless access point ?
View 1 Replies View RelatedThe facility provides WiFi access. I'd like to configure his router to access the facility's WiFi, as WAN access to the internet while providing DHCP service to the wired ports. The idea is to use the 4 wired ports to provide inter-connectivity to each other and internet access via the router's wireless connection via wireless for internet access by the wired client machines.I'd also like to firewall the wired devices from access by other users of the facility Wireless network.Can I do that? How do I configure the wireless aspect of their Belkin Share 300N? What other settings do I have to set.
View 2 Replies View Relatedi can't get my belkin wireless f5d6231-4 to connect to the internet I hooked up my router and i go to http://192.168.2.1 and it says that it is connected but when i click on firefox it says no internet connection or The connection has timed out. I hqave a cable modem i dont know if that is the reason
View 1 Replies View RelatedVerizon FIOS fiber optic DSL router 100meg working with other desk top and two other computers. The IP address is correct and signal is real strong, excelent according to PC. I put in the security KEY and it connects and says it's ok but no internet.I've tried every thing. When I plug in the ethernet cable everything works fine on line. With Belkin you can let windows start the wireless input or Belkin. I tried both. No luck. I'm sending you this over my ethernet cable. Need Tech support.I have another desktop with Belkin wireless card and it is working fine . I did try to troubleshoot useing it and lost internet on it and had to do a restore to get it back. So afraid to mess with it.
View 4 Replies View RelatedMy husband has an Acer Aspire 5720-4126. Last month I bought a Netgear wireless router (model WNDR4500) and he is the only one in the house that can't connect to the internet. He is able to get to the router, excellent strength, but the Activity has Bytes: Sent-3,142 Received-0. I had the Netgear customer service tech try with no results. [code]
View 7 Replies View RelatedI have two BELKIN f5d7230-4 wireless router my goal is to connect the two wirelessly and share the internet connection.
View 2 Replies View RelatedHow to configure Belkin N (F5D8636-4) Client IP Filtering so that a range of client IP' deny access to the internet using the following blocked time ranges e.g. Mon 5:00pm to Tues 2:00pm, Tues 5:00pm to Wed 2:00pm, Wed 5:00pm to Thur 2:00pm, Thur 5:00pm to Fri 2:00pm, Fri 5:00pm to Sat 10:00am, Sat 1:00pm to Sun 10:00am, Sun 1:00pm to Mon 2:00pm - BTW - this access regime is to deny internet access for my teenage son?
View 3 Replies View Relatedhas a netbook which on this one, the network is not working. He connects to the wireless router and gets an ip but he does not have access to the internet.When I tried the netbook at my house with my wireless, it worked perfectly and it stopped working again on my friend's network.
View 7 Replies View RelatedIm trying to set up a wireless router in my dorm room. I know, I am not supposed to do that. I got it set up and everything, but still didn't have internet access.
View 1 Replies View RelatedI have a HP laptop and unable to access the internet using a router. What should I do? I can use the lab top hooking it to the cable.
View 1 Replies View RelatedWe have a home use WRT160N router linked to a PC desktop and two wireless laptops, Yesterday bought a new I-Phone, but could not link to my network (entered the security key many times). I accidentally connected to computer fix it firm that linked to my PC and wanted a large sum to fix the problem which he said was due to large number of temp?? internet files and once removed he would change the IP address of the desktop computer? Is this diagnosis logical and can I do it on my own. The router is definetely working - both laptops access the internet and I was recently able to hook up a Samsung Blu-Ray player using the same security code I used for the I-Phone.
View 1 Replies View RelatedI'm having trouble accessing the setup page for my Belkin F5D8231-4 ver.2001 router.I tried all of the following ip addresses after hard resetting the router to factory settings: 192.168.0.1, 192.168.0.2, 192.168.1.1, 192.168.1.2, 192.168.2.1, 192.168.2.2,Neither plugged directly into the router with cat5 nor wireless connection made a difference.I tried using a different computer and different browser.
View 3 Replies View RelatedI am trying to setup my E4200 to my new Cable Modem. I followed all of the procedures. I get Internet access when plugged directly to modem. I cloned the MAC Address and the Stus of the Router displays my current IP's (so I should have Internet). However, when I plug my computer into the Router I get no internet access.
View 3 Replies View RelatedI have a problem with the e4200 router and a mybook 1 TB connected to it. The media server works fine but after a while i loose contact with the router and the server this means that the Cisco connect doesn't work, the 192.168.1.1 doesn't work and I can't find the disk via \. I do have internet connection via wifi as im using it now....why I loose connection to the router? The lease time is 24h and it can happen more than once in a day.
View 4 Replies View Relatedcan connect to the network but not the internet. In IPCONFIG it says media is disconnected. In properties it says adapter is not connected. But I can see the network, I can ping every computer on the network, just can't get to the internet.Reinstalled all the drivers, tried renew, netsh commands, flushdns, disabled & reenabled. 2 other computers connect to the internet and each other with no problem. Can connect to other WI Fi's too, but still no internet access.
View 8 Replies View RelatedSince I got my TP-Link 1043ND working in a previous thread I thought that my second router could be in good use at my brothers house about 50m from mine.I've got a modem in the basement, it's wired to the first router (TP-Link), the TP-Link sends wireless signals to five units, one of those units are my brothers computer. The Internet works fine on every unit.Now I thought maybe my brother will have better wireless signals to the first router if I connect a second router between. I guess the second router should be working like a switch then.I have the both routers MAC addresses. I got inside the first router and entered the WDS option, I chose LAN instead of Disabled and entered the second routers wireless MAC. Then I took the first routers MAC and entered it in the second routers WDS options MAC and Enabled it. It didn't work so I entered Static Routing Table on the second router and entered the first routers IP (started with 85.228) which I found in the dd-wrt menu. Then I entered same Netmask as the first router and the same Gateway with the interface LAN. No Internet access thou from the second router.The second routers LAN IP is set to 192.168.1.3 (the second router has 192.168.1.2 as LAN IP). DHCP is set to disabled at the second router. The funny thing is if I set the second router to the same LAN IP as the first router and the same DHCP settings with DHCP enabled it says that I have Internet Access but I can't enter the Internet
View 4 Replies View RelatedI can connect to my router with full strength no matter where I am in my house. But the moment the router leaves my sight, I can no longer connect to the internet. I just recently set up this router and the internet was working completely fine at full speed no matter where I was; then all of a sudden I had to be within direct sight of my router just to connect to the internethere is a 6 meter distance between my router and my room. between that is a plasma tv and one wall. I don't live in a concrete bunker with 6ft thick walls.There is only one conflicting channel in the area and it is channel 1. Changing between different channels has no effect. rebooting the router has a momentary effect where I am able to connect in my room at full speed, but it eventually dies and I lose connection again.
View 3 Replies View RelatedLinksys Wireless router connected but no access to the internet. I do not have a modem in my flat from ISP, only a cable, since the internet is set for every apartment in the building. I have a username and password that I use to connect. There is no problem connecting with the cable. I set up by Belkin wireless router and I'm actually connected to internet wireless but it only works if I also enable the primary ISP connection on my computer so my laptop is connected to internet without a cable. But this weird connection does not allow me to connect my phone to wireless or any other computer. Also the router settings site says not connected to internet and the internet light on Belkin is off.I have a Slovenian ISP -Amis, cable connection and Belkin Wireless modem, Avira Free antivirus.
View 3 Replies View Related