How To Execute A File (REG)
Jul 1, 2011I don't how to execute '.reg' file.
View 2 Replies
ADVERTISEMENT
Cisco :: ASA 5505 NAT - Execute The Ping It Will Show Timeout?
Dec 5, 2011I have setup this firewall with a NAT, everything seem fine. I try pinging from my external translate IP to the internal IP address, on the ASDM Log i can see the traffic built and teardown but on the PC i used to execute the ping it will show timeout. My configuration as belows:
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.10 255.255.0.0[code]....
Cisco :: Can Use Vb Scripts Or Bat Files To Execute Cli Commands On 6509 Catos 7.6
May 4, 2005can i use vb scripts or bat files to execute cli commands on 6509 catos 7.6?any useful links or scripts?
View 2 Replies View RelatedCisco Switching/Routing :: Can't Execute (ip Wccp Redirect Out) On 3750 Switch
Mar 13, 2012Today, my customer have 1 project that have to deploy Cisco 3750 to redirect wccpv2 to Websense Security Gateway.However, i can't excute "ip wccp redirect out" on Cisco Catalyst 3750.
View 5 Replies View RelatedCisco Switching/Routing :: 2911 - Capture User Who Execute Telnet / Show Line In Log?
Jan 21, 2013We are running in our DC one of the CISCO 2911 terminal server which is connected with HP ARC sight logger.
it is possible to capture user who execute ‘Telnet” or “show line” in the log, I mean all the command entries by user.
How to enable any config on 2911.
Cannot Access File Because Another Process Has Locked Portion Of File
Jul 26, 2011I am working on a Drupal site which is on a virtual server (the way it's been explained to me). I've been told I need to work with it through webdev. So I can copy a file off the server and onto my local machine. I make my edits and then try to upload it to the server. I get locked out with the message: Error 0x80070021: The process cannot access the file because another process has locked a portion of the file. I have tried shutting down my code editor, opening and closing the connection, tried different methods of reaching the server (Cyberduck and through Window's map network feature) to no avail. What can I do?
View 1 Replies View RelatedFile Sharing Through Vpn?
Dec 5, 2012I remote from home through a vpn to work. that works fine, but i want to be able to copy and paste files from work computer to my home computer. I've tried it and it doesnt work, so i know theres a setting somewhere, but where is it!?
View 3 Replies View RelatedGet File Sharing In DMZ
Sep 1, 2012PC A is connected to 3g wireless router and and 3g dongle is conneccted to the router.(dongle ip belongs to a vpn).I have added PC A to router's DMZ, so that all the requesta coming to the router through the dongle (vpn ip) are forwarded to PC A.(Now I can access PC A with the vpn ip(dongle)).Now what i want to do is to access the shared files and folders in PC A from a remote network which is connected to the vpn by using the dongle ip.(ex: \[dongle ip] should display the shared files and folders of PC A.)
View 11 Replies View RelatedTransferring File Over RDP?
May 6, 2011I have a media/storage pc set up in the living room, with my main pc (actually capable of handling the newer 3d content im getting) in the bedroom. All files are downloaded to the Media center pc. I recently changed the download location to drive D to alleviate stress on the operating system drive. Usually when I wanted to transfer files from the Media center to my pc I would go through computer - network - media - location of file. I have found I can't do this to access drive D on the remote Media. Is there a more efficient way than copying files from drive D to C on media just so I can pull them to my main pc? I have tried copying while in remote and pasting on my main pc desktop. It worked great for a 1kb file, but fails every time at 5gb files.
View 2 Replies View RelatedWhat Is Unins000 Dat File
Mar 1, 2013I bougth Reliance NetConnect+ and installed on my laptop 4days ago. from yesterday suddenly was showing some error and my win7 was showing smoe error and stop woking when I try to brows internet. I tried with uninstalling reliance netconnect from control panel and attempted restore systems. Now I am unable to use the Reliance netconnet showing error that the device is missing. and if I try to install / uninstall aslo I get message that ' unins000.dat file missing.
View 1 Replies View RelatedHow To Setup 2 PC To Write To The Same File
May 23, 2012How to setup 2 PC to write to the same file simultaneous without loosingdata or messing up the data from any two pc in a peer to peer network?Let say a file reside on PC1, both user open a file and edit the same timeand save the data and the file contain both data from both computerwithout messing up the content from either user
View 2 Replies View RelatedDeleting File From One Computer To Another?
Jun 8, 2011How do I delete a file using command prompt from one computer to another....
View 5 Replies View RelatedServers :: How To Save A Php File
Jan 27, 2011When I going to save a php file I got an error message "U don have permission to save it here"
View 1 Replies View RelatedWay To Salvage A Deleted File
Mar 4, 2011How do I salvage a deleted file on a Novell 3.12 server (DOS file)
View 3 Replies View RelatedIQU_bootstrap.exe File Wants To Install?
Oct 15, 2011IQU_bootstrap.exe i keep telling it no or close the window i have not installed this want to know what the tech support thinks
View 3 Replies View Related2501 Can't Seem To Get The File From Cisco
Jun 25, 2012I have a 2500 series router model 2501 , i would like to perform an update but i can't seem to get the file from cisco.
View 1 Replies View RelatedUsing The Jimbo To Send A File
May 6, 2012Jimbo i tried to use this command to send a file to another computer copy c:usersmikedesktopfile name \cumputer name or ip address or copy c:usersmikedesktopfile name \computer name or ip addressc$ or d$ but it says cant connect.invalid user name or password
View 9 Replies View RelatedFile Permissions On Windows Xp
Jun 7, 2011We have set up 1 computer (from now Computer A) running on windows xp as a "server" with other computers in a MSHOME group (from now Computers B -D). File permissions and sharing was set up to allow all remote users (Computers B-D) read and write access. This is however not always appropriate. Is there a way in which we can share a specific file or folder with Computer C (read and write) but not with Computer B and D?
View 4 Replies View RelatedSource File Could Not Be Read?
Mar 27, 2012i have issue with whenever i m trying to download any file it's get upto almost 95-98%,but after suddenly stop.this issue with firefox, chrome browser
View 1 Replies View RelatedCannot Use FTP After Large File Upload
Jun 4, 2011I was uploading a big 2gb file to my FTP server, it was all going good and I managed to upload the whole thing hassle free. After I finish I log out, and return about 3 hours later and try to log back in, to no avail.WinSCP gives me the following error:
[code]....
File Sharing With A Switch?
Mar 11, 2013So what i want to know is, is it possible to file share only using a switch? At the moment I have 5 xp 1 switch (with ethernet cables) No router and no internet (the no internet can not be changed).
Will i have to set up individual ips manually (192.168.1.1/2/3/4 etc and then create a home network using the wizard and create a network disk.
Or save our time and get a router
File Sharing Won't Stay On?
Oct 10, 2012I've recently had an issue where when I turn on File and Printer Sharing, and click apply, I go straight back to the advanced setting menu and its switched back to off despite me changing it.
I cheked my services menu and I'm not sure what file and printer sharing has a dependancy on, but Workstation, Netlogon, and Computer Browser will not turn on with the error "windows could not start *** service on the local computer. Error 1068: The dependency service or group failed to start"
I network printers and servers for a living, so this is an issue when I'm troubleshooting problems.
I cant really name everything thats been installed on this laptop, it changes pretty consistently, but no programs should have interfered with my network.
How To Set-up File Sharing Through A Router
Apr 12, 2011Setting up file and printer sharing pass through a router...in different OS.
View 2 Replies View RelatedDetection Of Big File Downloads
Aug 30, 2011How can I detect who is downloading big files in our network.Because it is banned in network for certain peak times. We are using DSL connection.
View 2 Replies View RelatedWhat Port Is Used For File Transfers On A LAN
Feb 14, 2012You would think that's easily found via Google but that is not the case Our firewall seems to be blocking some file transfers from wireless clients logged into the domain to our Server 03 file server so I need to make an exception but I don't know what port is actually used for that.
View 11 Replies View RelatedSharing A File Does Not Work?
Sep 12, 2011I have XP sp3 on my desktop and a new netbook with Win 7. I have set up wi-fi networking between them and have had some success of sharing a file. Today, I wanted to share my Firefox profile from my desktop to my netbook. I clicked on share this folder and could not find it on my netbook. I did a search with the title and nothing appears.
View 12 Replies View RelatedWindows 7 And Xp File Sharing
Sep 19, 2012The Windows XP SP3 PC can login to the Windows 7 PC's file shares without a problem.But, the Windows 7 PC cannot login to the XP PC's file shares. Using the GUI I always get error code 0x800704b3. Using the "Net Use" command I always get "System error 67 has occurred. The network name cannot be found."This problem occurs regardless of whether I try to connect to the Windows XP PC by network name or IP address.On the Windows 7 PC I can successfully ping the Windows XP PC by both network name and IP address.
View 8 Replies View RelatedFile Sharing Between Computers?
Jan 25, 2012A desktop running XP, connected via ethernet to a linksys E1200 router that is connected w/ethernet to satelite modem. And a Laptop running Windows 7 that is communicating wireless to the router.Question: Can I share files between the two computers this way, or do I have to get a cradlepoint router?
View 3 Replies View RelatedHow To Run A Ms-dos Batch File On Windows Xp
Mar 13, 2012I have a project in java. there are some batch files. i am not able to run those files. it just blinks and disappears immediately. should i change some settings in my windows xp?
View 5 Replies View RelatedFtp File Name With Date And Space?
Jan 22, 2012how to ftp a file with date in it's name. for ex.reportname filename yyyymmdd.cvname with space
View 3 Replies View RelatedHow To Share File In A Different Network
Oct 22, 2012i have 50 web IP in my company. i should be share some document, file and software on these all web IP. i should be installed one PC in Windows server 08 R2 and other PC should be installed in Windows 7. how should be share document and file in server 08 R2 system.
View 1 Replies View RelatedRun BAT File Remotely Through Sftp In GUI?
Aug 25, 2012how to actually run a .bat on a remote computer through ssh/sftp in a GUI. My problem is that I havent been using command lines for 15 years, I litterally have never used a command line besides using stuff like ipconfig in command prompt.I have a ssh server on my home server using FreeSSH'd and The only ssh program i can find with a gui is winscp. Though theres no option to connect through ssh everyone says it does and theres even options for it.
Though when i try to run the bat file i get this error"Current sftp -3 session does not support command you request" then something about a seperate shell session. if i click ok it goes down to starting the session then just sits there and says host is not communication for more than 15 seconds still waiting and only option is to abort.
LAN Connection To File Store?
Sep 6, 2012Situation: I have a File server, name is \fileserver and ip address is: \192.168.1.254The shared drive on the server is split into 2 folders which are: Data and HomeI have 17 laptops which all connect to these folders via a group policy which maps the L: to Data and the H: to Home. On 4 of the laptops, for some reason I can't access the Home folder as I get an access denied message. I am the administrator and have full rights. On the other 13 laptops it works fine. I have found that if I try connecting using the IP address \192.168.1.254Home, it works fine.[CODE]
View 10 Replies View Related