2501 Can't Seem To Get The File From Cisco
Jun 25, 2012I have a 2500 series router model 2501 , i would like to perform an update but i can't seem to get the file from cisco.
View 1 Replies
ADVERTISEMENT
AUI Ethernet Port On Cisco 2501?
Apr 17, 2012I am quite a bit rusty from my days of networking. I am trying to setup my lab so I purchased 3 cisco 2501 to study for my CCNA, my question is? I have 2 serial interfaces and 1 AUI for ethernet on each router. How can I configure the Ethernet interface, if I don't see it on the configuration. From the CLI command I issue the command show ip int brief. But It only shows the 2 serials but no E0 interface.
PS. I do have an Ethernet Transceiver connected to the AUI port on the router with a straight through cable going into a 2950 switch.
Protocols / Routing :: AUI Ethernet Port On Cisco 2501?
Apr 17, 2012I am trying to setup my lab so I purchased 3 cisco 2501 to study for my CCNA, my question is? I have 2 serial interfaces and 1 AUI for ethernet on each router. How can I configure the Ethernet interface, if I don't see it on the configuration. From the CLI command I issue the command show ip int brief. But It only shows the 2 serials but no E0 interface.
PS. I do have an Ethernet Transceiver connected to the AUI port on the router with a straight through cable going into a 2950 switch.
Cannot Access File Because Another Process Has Locked Portion Of File
Jul 26, 2011I am working on a Drupal site which is on a virtual server (the way it's been explained to me). I've been told I need to work with it through webdev. So I can copy a file off the server and onto my local machine. I make my edits and then try to upload it to the server. I get locked out with the message: Error 0x80070021: The process cannot access the file because another process has locked a portion of the file. I have tried shutting down my code editor, opening and closing the connection, tried different methods of reaching the server (Cyberduck and through Window's map network feature) to no avail. What can I do?
View 1 Replies View RelatedCisco :: SRX 210 NCS 1.2 Import Third Party MIB File
Feb 21, 2013I would like to use the NCS 1.2 to monitor Juniper SRX 210 firewall. When I try to import the MIB File from NCS, which show "Error: Failed to load MIB File "mib-802" because it is not in the resource path.what I can upload the MIB File from Juniper. [code]
View 0 Replies View RelatedCisco :: RME 4.2 Can't Get Configuration File From ASA5520
Aug 10, 2010I have a problem with RME 4.2 from CWLMS 3.1. I have configured SSH in my asa 5520 device but RME can't get the configuration file. I ran a job to sync archive but i get this message error:
*** Device Details for ASA_5520_VOZ_01 *** Protocol ==> Unknown / Not Applicable Selected Protocols with order ==> Telnet,TFTP,SSH Execution Result: CM0062 Polling ASA_5520_VOZ_01 for changes to configuration. CM00 Polling not supported on
[Code].....
Cisco WAN :: 857 Signature Not Found In File
Jun 19, 2012The router(Cisco 857) appears to be boot, and operate normally.I have tried formating the flash, re-downloading and FTP uploading the image, and also tried the latest image c850-advsecurityk9-mz.124-15.T17.bin, but this warning message persists. [code]
View 3 Replies View RelatedCisco :: Upgrading From LMS 3.1 To 3.2 / Can Use Same License File
Mar 14, 2012if we are upgrading from lms 3.1 to 3.2, can we use the same license file of 3.1?
View 4 Replies View RelatedCisco :: Find GSD File For IE3000?
Dec 11, 2011Where can I find the GSD file for IE3000?
View 2 Replies View RelatedCisco WAN :: 877 No Boot File / But Appears To Have IOS
Feb 7, 2013I have two 877's that have both reset with the following messages on boot, and dir of flash and lost+found/It appears that there is a IOS on the flash? but rommon doesn't know where it is. I tried to "set" with no luck as set is read.
I have noticed that the IOS is 0 size. [code]
Cisco AAA/Identity/Nac :: Private Key File From ACS 3.3?
Apr 26, 2011I have my SSL server certficate on my old acs 3.3.along with private key file , How i can export this private file with .pem extension from windows 2000 server , This private key file is not identified under certificate mmc console , Because my acs application is being installed on a separate hardisk partition under D drive .
file path : d:Certificatesh02cacsw02.pem
how i can export this.pem from that particular folder
Cisco VPN :: ISR 2921 - IOS IPS Signature File
Jul 12, 2012We have recently purchased a Cisco ISR 2921, and on its docs it is written that this product has a License for IOS IPS Signature File, but on the product Flash Memory there is no IOS IPS Sig-File. and while i try to download the signature file from Cisco, it fails.
View 1 Replies View RelatedFile Sharing Through Vpn?
Dec 5, 2012I remote from home through a vpn to work. that works fine, but i want to be able to copy and paste files from work computer to my home computer. I've tried it and it doesnt work, so i know theres a setting somewhere, but where is it!?
View 3 Replies View RelatedHow To Execute A File (REG)
Jul 1, 2011I don't how to execute '.reg' file.
View 2 Replies View RelatedGet File Sharing In DMZ
Sep 1, 2012PC A is connected to 3g wireless router and and 3g dongle is conneccted to the router.(dongle ip belongs to a vpn).I have added PC A to router's DMZ, so that all the requesta coming to the router through the dongle (vpn ip) are forwarded to PC A.(Now I can access PC A with the vpn ip(dongle)).Now what i want to do is to access the shared files and folders in PC A from a remote network which is connected to the vpn by using the dongle ip.(ex: \[dongle ip] should display the shared files and folders of PC A.)
View 11 Replies View RelatedTransferring File Over RDP?
May 6, 2011I have a media/storage pc set up in the living room, with my main pc (actually capable of handling the newer 3d content im getting) in the bedroom. All files are downloaded to the Media center pc. I recently changed the download location to drive D to alleviate stress on the operating system drive. Usually when I wanted to transfer files from the Media center to my pc I would go through computer - network - media - location of file. I have found I can't do this to access drive D on the remote Media. Is there a more efficient way than copying files from drive D to C on media just so I can pull them to my main pc? I have tried copying while in remote and pasting on my main pc desktop. It worked great for a 1kb file, but fails every time at 5gb files.
View 2 Replies View RelatedWhat Is Unins000 Dat File
Mar 1, 2013I bougth Reliance NetConnect+ and installed on my laptop 4days ago. from yesterday suddenly was showing some error and my win7 was showing smoe error and stop woking when I try to brows internet. I tried with uninstalling reliance netconnect from control panel and attempted restore systems. Now I am unable to use the Reliance netconnet showing error that the device is missing. and if I try to install / uninstall aslo I get message that ' unins000.dat file missing.
View 1 Replies View RelatedCisco :: 6509 / Why Controller Can't Upload File
Nov 9, 2011I am using WiSM in 6509, this WiSM has two controller with the same management IP subnet, I tired to upload the configuration to the TFTP server, but tried many times, one of the controller working well, but the other one always cannot reach the TFTP server, here is the debugger log for both controller
Failed one:
(KGV-WiSM-1) >debug transfer all a enable
(KGV-WiSM-1) >*TransferTask: Nov 10 16:26:08.735: RESULT_STRING: TFTP Config transfer starting.
*TransferTask: Nov 10 16:26:08.735: RESULT_CODE:1
*TransferTask: Nov 10 16:26:32.018: Locking tftp semaphore, pHost=172.16.102.107 pFilename=/KGV.aes
*TransferTask: Nov 10 16:26:32.018: Semaphore locked, now unlocking, pHost=172.16.102.107 pFilename=/KGV.aes
[code].....
why the controller can't upload the file, I can ping both controller and both controllers can ping to the TFTP server.
Cisco Firewall :: Need Image File Install On Pix 515
Aug 28, 2011I have a pix 515, time to time the firewall start rebooting with invalid flash error I found erasedisk.bin in internet, after that i cant load pix532.bin ios file and others pix***.bin are not workingThe only file i am able to load is pix508.bin it,s start asking me activatin number before install I have a previous activation number ios version 5.3.2 but this number is not correct.
View 1 Replies View RelatedCisco VPN :: ASA5525-X - When Transfer File Get Error
Oct 16, 2012IPsec VPN configured between ASA5525-X and Linksys RV042 ,While transfering some exe from ASA5525-X side to Linksys RV042 side over VPN hash-sum of this file changes, so, when you open transferred file, you have an error message "File is corrupted". If you try to transfer file from Linksys side, hash-sum is ok. Also, work with oracle application is interrupted because of unknown reason. IPsec works only if using router instead of ASA.
View 2 Replies View RelatedCisco Application :: ACE 4710 To Distribute A Pac File
Mar 19, 2012I need to use the Ace 4710 to distribute a Proxy PAC file, e.g. [URL] which will be configured in client browser using an AD group policy. Is it possible for the ACE to host and serve a file in this way?
View 3 Replies View RelatedCisco :: Upgrading To LMS 4.0.1 / File Copy In Progress
Apr 5, 2011After the installation LMS 4.0 I make Upgrading on LMS4.0.1. The process remains stand with the message "File Copy in progress..." during several hours. After the Reboot of the server it points me Cisco Works again with LMS 4.0 starts.OS Version: Windows 2008 R2
View 14 Replies View RelatedCisco VPN :: DfltCustomization File Is Missing In ASA 5580
Sep 22, 2012I wanted to perform the customization of the SSL WebVPN page. But When I tried to create a new Customization object is is not happening as the DfltCustomization object is not available.We are having so many webvpn configuration and objects that i cant issue "revert webvpn all" command.Can I able to import the File from any location or the default customization object file so the I can export it into the ASA and create new custmixed object accordingly.Or what other steps I can take to have customization happening in my Cisco ASA 5580. 8.2 (5) and ASDM 6.4.
View 1 Replies View RelatedCisco :: 2960 - Possible Collecting VLan DAT File Using SCP On LMS 4.2
Feb 12, 2013vlan.dat file fetch.
I'm using Cisco Prime 4.2 and VLAN fetch for all devices is currently going over TFTP. Devices managed by LMS are 2960, 4500, 6500 series. All devices are using SSH v2. ACS server is configured on all devices and SSH credentials are OK.
This is the error message I get when i select SCP: "SCP user credentials not available. Configure the SCP user credentials and try again Action: Check if protocol is supported by device and required device package is installed."
Is it possible to use SCP as VLAN fetch protocol? How to configure this on a devices and how to enter SCP credentials in LMS?
Cisco :: LMS 3.2 / EDS-GCF Log File Size Increasing Rapidly?
Nov 22, 2012We have lms 3.2 that we are facing a problem with it. When we start the server the EDS-GCF log file size start to increasing rapidly until it consumes up all free space and it only stops when we stop the Daemon Manager service. I tried to do the pds how command but I get no output from it. I included the portion of the EDS and EDS-GCF log files. i searched and didn't find the cause of this error.
View 3 Replies View RelatedCisco :: LMS 4.2 Syslog File Size And Management
Jun 8, 2013i have LMS 4.2 in Network with 100 devices, all of my devices have ACL so, there are too many logs in syslog
after a while the size of the log files in /var/log files (boot.log, messages.log) going to have huge size, something about 20G for each one
I'm looking for a way to reduce the size, is it possible to use Log Rotation or not?
Cisco :: WLC 4402 - File Doesn't Have ER Distinction
Feb 18, 2011I'm upgrading my 4402 controllers from 4.2.112.0 to 4.2.209.0 and I also need the 4.2.205.0 ER.aes file. On a previous discussion I was given a link for the 4.2.205.0 ER.aes boot file for the 4404 controller. When I went to the 4402 controller software and clicked on the boot file 4.2.205.0 ER.aes, the file doesn't have the ER distinction. I was wondering if this is not really the ER.aes or is it just a typo in the file name?
View 6 Replies View RelatedCisco AAA/Identity/Nac :: ACS 4.2 - Convert Dmp File To Another Format?
Jun 16, 2011Is there a way where I can just export the clients from one server and restore them onto another?
Is tehre maybe a way to convert the dmp file to another format, like csv, then modifying it and converting back to dmp?
Cisco VPN :: ASA 5510 / Wildcard Cert - Only Have CER File
Dec 5, 2011how to install a wildcard certificate with only the .cer file. I've found quite a few things here in the forums, but everyone seems to also have a pkcs12 file, which I do not.
This is an ASA 5510 on ver 8.4.
Cisco Switches :: Editing Of Cfg File With SLM2008
Jan 26, 2012I would like to edit .cfg configuration file of Cisco SLM2008. However, I can't read the file because I don't have a good editor(.cfg is a binary file).
View 1 Replies View RelatedCisco :: Wireless Transfer File With SCG880
Nov 23, 2012because I have a problem with my wireless connection and have everything configured correctly have done according to the link URL
Every Time I copy a file or multiple files over LAN switch from a PC to PC b become each restart the wireless module and am lost file.
Cisco AAA/Identity/Nac :: ACS 5.2 - Cannot Find Backup File
Jan 20, 2013I had ACS 5.2 ( Evalution License ) setup installed on VMware with patch 11 when I try to restore earlier backup of ACS gives me error "Cannot find acsbackup_instance.log in the backup file"
I am using Filezilla FTP sever for backup transfer.
How To Setup 2 PC To Write To The Same File
May 23, 2012How to setup 2 PC to write to the same file simultaneous without loosingdata or messing up the data from any two pc in a peer to peer network?Let say a file reside on PC1, both user open a file and edit the same timeand save the data and the file contain both data from both computerwithout messing up the content from either user
View 2 Replies View Related