I have a media/storage pc set up in the living room, with my main pc (actually capable of handling the newer 3d content im getting) in the bedroom. All files are downloaded to the Media center pc. I recently changed the download location to drive D to alleviate stress on the operating system drive. Usually when I wanted to transfer files from the Media center to my pc I would go through computer - network - media - location of file. I have found I can't do this to access drive D on the remote Media. Is there a more efficient way than copying files from drive D to C on media just so I can pull them to my main pc? I have tried copying while in remote and pasting on my main pc desktop. It worked great for a 1kb file, but fails every time at 5gb files.
I have a router connected ea2700 on the Internet port to a switch se2800.e switch is connected and everything is gigabit nas. if I try to transfer a file from PC, gigabit ethernet, the transfer rate does not exceed 8 MB/s. if I transfer a file from the NAS to the PC speed is 15 MB/s. the support advised me to change MTU manufacturer parameters,to disable protection,and clone the mac address.the situation has not changed.if I configure the router in bridge mode, the speed is 22MB/s and 45MB/s.
Is it possible to transfer an image (that is broken into parts for transfer) using 4 LAN ports at source end and 2 LAN ports at recieving end.The goal is to minimise the transfer time of the image as we have 4 LAN ports ont he source machine and 2 LAN ports at the destination
I want to transfer big fiiles from PC to another PC, and it has happened frequently, I was wondering is there any way that I can send them directly with high speed if they are connected to the same router (my Router),I got an Desktop with Windows 8 64bit.The target PC (to transfer files) Laptop Windows 7
1) HP nw8440 with Intel PRO/wireless 3945ABG, running Vista Business, all latest driver & Win updates (ok, missing the last few that should arrive soon);
2) Dell m4400 of some sort (supports 802.11n) running Windows 7 beta. This user says wifi works flawlessly in his home environment.
Transfer type: not even transferring anything - just sit there watching it... pings to otherwise speedy servers up and down like a yoyo followed by drop of ping transmission. At one stage I even saw the unit not responding to pings or admin website directly off LAN port once the problem had occurred - all leds looking normal, but no ICMP response. power cycled the unit, and it all started working again.
Only AP in our network - others in neighbouring buildings, but not under our control.
Can't say I've verified no overlapping IP's. will check tomorrow.
Re logging, I have syslog going off to neaby Linux server... despite having all the log types enabled, the only types of messages I see being logged are those about clients trying to connect, and options being changed. No sign of any error messages.
Ours is also a straight forward network - no Vlans, just one SSID, WPA-Personal/TKIP. Thought it might be to do with MAC filter, so disabled that, but no improvement. Tried channels 6 & 9 so far. I know in years gone by there has been plenty of talk re interference from microwave ovens etc - any chance of this being the culprit? Haven't toyed with any of the options on the Advanced tab under Wireless.
Tried switching back to BG instead of BGN (the Dell has N support) but that didn't work either.
Is there any chance this has anything to do with Vista/Win7 compared to XP? I've not tested with an XP client OS, but the somewhat vague report from a more distant XP user on the network was that he wasn't having problems at around the time we were, though I'd need to probe him more to be sure.
The AP was purchased around 1 week ago, and came with 1.0.12 (latest) installed. I also did a factory reset upon first use, before configuring. WPA key has 13 charcters, being a mix of numeric, alpha (both cases) and special (!@#$ etc...) characters.
This is decidedly embarassing for us since we were finally able to ditch the old Dlink AP we hated so much - but so far this Linxsys/Cisco ain't faring much better. Bring on 1.0.13 I say... :)
Edit: the unit is in regular/default AP mode, with own IP being static (SBS DHCP server has that MAC hard coded to that IP also). I presume teh AP's MAC is the same whether on WiFi or LAN port (??).
As stated in the attached picture, my company has a remote office which its PBX was connected to the main PBX via a pair of leased lines and a pair of E1/HDSL converters. (The distance is about 2 kilometers, so the E1 was converted to HDSL and then back to E1 at the remote site)
Now, IP network is developed between two sites.We want to transfer the calls via a pair of 2811 Routers, both equipped with VWIC2-1MFT-T1/E1, as the second part of the picture. I tried to find an straightforward document, but I was unsuccessful.What configurations should be made at both ends to transfer the calls to/from the remote site ?
I have a friend with a mac laptop that I need to transfer roughly ~110 GB from. I have a laptop that dual boots Windows 7 and Kubuntu 12.10. Easiest way to directly transfer these files between our computersNeither of us has a large enough external hard drive.
Wan goes down when transferring files between pcs connected to the lan port.It looks like it's running out of resources or something. Passing more than 10GB of data to other pc is a pain in the ass because nobody else can access internet (lan and wireless clients).Filled a support request in local dlink site. No response so far.
Model Dir-600 B2 Firmware 2.05
2 pcs transferring lan data.3rd pc (doing nothing) can't access router config at 192.168.0.1.
1 Virgin media home home up stairs in the home office. Ether cable running from the home hub, outside the house to the downstairs lounge with an ethernet socket on the end. Cable from the socket into a dlink router (set to operate as a hub).My reason for this setup was due to the rubbish wireless signal from the virgin hub, and the fact that I have various other bits of kit downstairs that I could use an ethernet cable with.The question is, IF my laptops are connected to the router downstairs by an ethernet cable and I want to transfer some files between them, will the data be routed through the virgin media hub upstairs before coming back to the router that both laptops are connected to downstairs? I have just done a test with 30gb worth of files and the transfer speed was 8.7MB/second, is that good for wireless?
I have one machine at office and one at home, both Windows XP SP3, ADSL connection with static IP.On the office machine a have an archive of about 250 GB of files.When i am at home sometimes i need to connect to my office machine, search through those files, maybe preview some, and then download some needed files to my home machine, using a download queue feature is possible.
Radmin UltraVNC TeamViewer p300 DC++ and many variations of it.
Note: am not allowed, and don't want to install any kind or sort of server application on office machine.
We have deployed an ACE 4710 and its working perfectly. But the problem is that after I chage the default gateway of the servers I am not able to transfer files from one server to other. Is there any special configuration needs to be done on ACE to achieve this?Other than copy Ping, telnet and everything is working fine from the servers. These servers are in the same subnet & VLAN.
I am using csc-ssm module in Cisco ASA 5520 firewall, with the csc version as 6.3.1172.0. I have a public Ftp server and when i ever i transfer the zipped files more than 50 MB or 70 MB or more than that, it fails. I used to upload by clicking the ftp site and copy past the file to the location. After a certain point of time, the download fails with the below error on the explorer.An error occured copying a file to the FTP server. Make sure tou have permission to put file on the server.Details: The operation timedout
Firewall log is below.
ABCFTP1|21|10.120.110.162|1257|Teardown TCP connection 48091783 for Internet:ABCFTP1/21 to XYZ:10.120.110.162/1257 duration 0:00:27 bytes 656 TCP FINs .
-- When i remove the service policy from the firewall, and try to transfer the files, it goes through without any problem. ena
-- Pls check the attached screenshot of the ftp settings in CSC-ssm. There is no problem with downloading files from the server.
We now have a new requirement . We are replacing existing pair of CSS with ACE 4710 appliances. The problem here is that I can see from the configuration that some SSL certificate installed in CSS .Is it possible to transfer the existing SSL certificate from the 11503 to the ACE? Or, do we need to generate a new key pair and CSR on the ACE? Is there any document available to know the steps for the same.
Here a have a quest that can't find the perfect solution for a half year now.I have one machine at office and one at home, both Windows XP SP3, ADSL connection with static IP.On the office machine a have an archive of about 250 GB of files.When i am at home sometimes i need to connect to my office machine, search through those files, maybe preview some, and then download some needed files to my home machine, using a download queue feature is possible.The task doesn't seem so complicated, yet, i did not find a perfect simple solution so far.
Internet connectivity on my laptop is lost shortly after beginning to upload/download files over the internet to my cloud storage provider. I also lose connectivity when transferring files to or from the laptop within my LAN to a desktop computer connected via wireless router as part of a workgroup. Connectivity is only restored once I restart the laptop or uninstall, then reinstall drivers for my wireless network card. The issue then reoccurs once file transfers begin again.The laptop is running Windows 7 Home Premium SP1. The driver for my Intel Wireless WiFi Link 4965AGN internal network adapter are up to date. I have a Linksys WRT610N ver.2 router, and an HP Pavilion dv6500 laptop.
I have a Wrt160n router and a Motorola sb120 modem (provided by comcast after my original modem got fried by lightning, no I didn't have my router hooked up when that happened), I have been having trouble trying to get the modem to send the internet signal to my router. I have tried mac address clone that was suggested on this forum for someone with a different router but still no internet to my computer, its all hooked up through Ethernet cables, the computer I have it hooked up with a hard line is running windows seven. When I plug the modem straight to the computer it works and I have internet but when I hook up the router between them it has no internet.
I got a refurbished EA4500 (directly from Cisco) last week. I have been having a few issues, which I have found (not too great) workarounds for. However, the latest issue has me stumped, and is unacceptable.Whenever I am transferring files between 2 computers, I get kind of OK speed (5 MB/s). However, while this transfer happens, no other device can connect to the net. Actually, even trying to go to router home page (192.168.1.1) times out.The clients still say they are connected to the router, but I just can't get anywhere.As soon as the file transfer finishes, everything goes back to normal.EA4500 replaced a WRT54G. Never had any problems with that router. It was such a workhorse. Just needed to upgrade to a n-router.I am on the latest non-cloud firmware.I have reduced the MTU size to 1200. Not sure that matters.
I have an EA3500 and a Windows Vista PC, connected through wireless. When I transfer data from PC to USB shared storage on the router the speed seems normal while it goes awful when I do the opposite. The average speed goes around 200kb/s to be specific. This is unbelievable as it is year 2013.
On my moms laptop, (month old Lenovo B570/i3-3230/4GB/W7), when transferring files to my Crucial Gizmo! 16GB USB Drive, it is pretty much impossible to surf the web. Loading websites take 30-60 seconds, it's ridiculous. Is this normal? Her router is Linksys WRT54G. Router is not connected via USB, in fact the Laptop is connected through ethernet cable (not currently using wireless).
I am working on a Drupal site which is on a virtual server (the way it's been explained to me). I've been told I need to work with it through webdev. So I can copy a file off the server and onto my local machine. I make my edits and then try to upload it to the server. I get locked out with the message: Error 0x80070021: The process cannot access the file because another process has locked a portion of the file. I have tried shutting down my code editor, opening and closing the connection, tried different methods of reaching the server (Cyberduck and through Window's map network feature) to no avail. What can I do?
I have had an e4200 for about a month now and its been pretty good. But I have noticed that it completely locks up when I go to copy mass amounts of data through it. I have a NAS drive plugged into it and my laptop is on the 2.4 spectrum. I went to transfer 8gigs of data from laptop to NAS drive and the entire wireless portion of the router locks up. All my wireless clients drop and I have to unplug the router and plug it back in. Even the 5ghz clients drop as well. I have not tried hardwire, but the main reason I got this was for its throughput.
Cable modem into cisco-linksys E4200. 2 of the ports going out from the router plug into the wall, where one goes to the master bedroom and one goes to the living room. Once it gets to the wall jack in each of those rooms it goes out to a gigabit switch. Each of those two rooms has a computer and a TV connected, and the living room as a blu-ray also connected to the switch.The third port going out from the E4200 router goes to another gigabit switch, which is connected to a couple more computers in that room.All of the cables are either cat5e or cat6. The long cables running through the wall from the server room to the living room and master bedroom is 24gauge 4pair cat5e, it was run by a general contractor.
When I transfer between any of the computers on the network as it sits I get 11MB/sec. I get that number by clicking more details on the file transfer. In the network tab of task manager it sits pretty consistently at 10%.If I move any of the computers to be connected to the SAME switch (i tested all 3) i can transfer around 60MB/sec.Based on this testing my initial instinct is to say that the cable running between the rooms is limiting the transfer speed. However the cable is cat5e and rated for gigabit. Neither of the runs are anywhere near 300ft long. Plus the consistency of the transfer speeds at 11MB/sec makes me think it's being clearly capped at 100base-T speeds as opposed to just slowing down due to interference of the cable.As a side note there is a place in the router that tells you the speed of each port. For some reason it has one of my ports listed as gigabit and the others listed as 10/100Mbps. The yellow 3 foot cable i have is listing as gigabit, when i swap it with another cable in the router it changes the gigabit port to the one this yellow cable is on, very odd, however regardless of whether the router says its gigabit it only transfers at 11MB/sec anyway.What I'm wondering is what could be causing this limitation besides the two cables running through the wall? Is that the only thing that could be doing it? What is the best way to really test it out? Do I need to buy some kind of network testing device that tests throughput?
I remote from home through a vpn to work. that works fine, but i want to be able to copy and paste files from work computer to my home computer. I've tried it and it doesnt work, so i know theres a setting somewhere, but where is it!?
PC A is connected to 3g wireless router and and 3g dongle is conneccted to the router.(dongle ip belongs to a vpn).I have added PC A to router's DMZ, so that all the requesta coming to the router through the dongle (vpn ip) are forwarded to PC A.(Now I can access PC A with the vpn ip(dongle)).Now what i want to do is to access the shared files and folders in PC A from a remote network which is connected to the vpn by using the dongle ip.(ex: \[dongle ip] should display the shared files and folders of PC A.)
I bougth Reliance NetConnect+ and installed on my laptop 4days ago. from yesterday suddenly was showing some error and my win7 was showing smoe error and stop woking when I try to brows internet. I tried with uninstalling reliance netconnect from control panel and attempted restore systems. Now I am unable to use the Reliance netconnet showing error that the device is missing. and if I try to install / uninstall aslo I get message that ' unins000.dat file missing.
How to setup 2 PC to write to the same file simultaneous without loosingdata or messing up the data from any two pc in a peer to peer network?Let say a file reside on PC1, both user open a file and edit the same timeand save the data and the file contain both data from both computerwithout messing up the content from either user
