our house have a lot of rooms and think walls and the router set up in my room is giving only 2 signal bars in other parts of the house. i already have 2 routers and planning to place the 2nd router in the living room using a long cord. can i use 2 routers in one modem?
View 1 RepliesMy Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
View 1 Replies View Relatedeverything was all good, my brother went crazy and unplugged everything.it effects our house phone too, that could be the problem.i just dont know what wires went where. all the wires are the same color.but i know which is which. just again, dont know where.i would like to get it done before he gets home later on.
View 1 Replies View RelatedIn my office we have concrete walls and very limited wiring. The way it is set up is we have a Verizon DSL Modem that comes in then I have a router with it that splits the signal to 4 other routers that each split the signal 2 to 3 more times. I have to use routers so that it assigns IP addresses.I bought a new D-Line N300 Wireless router with USB imput. I want to attach my Home Media Network Hard Drive Cloud edition to the 1st router (attached to the modem) and then share the data off that hard drive with everyone connected to the sub routers.
View 4 Replies View RelatedI'm following this tip, but how do you access the second router (Cisco E2500) settings? I always get sent to the first router.
View 4 Replies View RelatedIs Huawei usb modem EC159 (ISP : Reliance Netconnect+ ,India) compatible with ASUS RT-N56U and Linksys E3200 dual band routers?
View 1 Replies View RelatedI have one cable modem and a cisco Ea4500 router which still cannot connect wirelessly to my wife's computer at the far end of the house. This computer is attached to my router with Cat five wire. but, to extend true wifi thoughout the house, I'd like to use that cat 5 to connect to a NEW ROUTER AT HER COMPUTER, AND HAVE IT SLAVED TO MY ORIGINSL CABLE MODEM AND ROUTER SET UP. thus bringing one wifi signal throughout the hous
View 2 Replies View RelatedWe have a standard surfboard modem and a standard wired router. I recently purchased a wifi-only tablet thinking I could connect to an ad-hoc hotspot. This however isn't the case and now I can't use my tablet at home.I'm going to buy an inexpensive wifi router and just have that dedicated for my tablet. I've read that you can connect a wifi router into a wired router, but it requires a lot of mucking about with the settings. Then I remembered the USB connections that modems and routers have.can you have one wired router connected to the modem via a standard cable and also have a wifi router connected to the same modem via a USB cable?
View 3 Replies View RelatedI have two wireless modem/routers - a Ugo Mach5 CN458 and a Swift 4G - in two branches of my company that are distance apart and i want to connect them together so that they can be on the same network and workers in both branches can communicate and share files.
View 2 Replies View RelatedCan I connect two routers on a single internet modem. I need a router that is isolated from a public wi-fi connection. The routers need to operate independently.
View 2 Replies View Relatedi have a cable modem and i want to connect 2 diferent wireless router .when i connected i dont have internet trought LAN ports just wireless and i need have internet in those LAN ports.
View 4 Replies View RelatedSo here's the setup, my apartment is right next to my parents' house (don't ask why) and they have a netgear WNR2000 router in their upstairs loft connected to a modem going to a local internet provider. My apartment is just far away enough so that I can barely get a signal, so I'm trying to set up a second wireless router (netgear WNR1000v2) in my apartment that will connect to the internet through the first router so I can get a better signal. I do have a way of running an Ethernet cable from the first router to the second in my apartment.
View 3 Replies View RelatedMy network currently consists of one cable modem, and one linksys router.i was given a Belkin N router as a gift, and instead of returning it for a different brand ive decided to keep it. i would like to essentially use a splitter or switch in between my current router and modem.This is the plan. Keep modem and linksys router in the den, use a splitter or switch to split the signal from the modem to each router. Use a 50+ foot ethernet cord running from the splitter or switch through the attic and into another room.
View 12 Replies View RelatedI have successfully got QuickVPN working from Windows 7 64bit into my WRVS4400n. The router is sat behind another router/modem (Belkin) as the UK uses PPPoA and the WRVS4400n doesn't.So I set up DMZ and changed the DHCP to always allocate 10.x.x.2 on the Belkin which is the WAN side for the WRVS4400n as it is the only thing attached.I have now noticed, and I'm not sure whether it was the case before, that the DNS that the WRVS4400 is showing is the LAN address for the Belkin Modem/Router (10.x.x.1), not 192.x.x.1 for the WRVS4400n itself. I assumed setting the Static DNS 1 on the WRVS4400n would do it, but it didn't?When I connect into the network with QuickVPN, the computer names do not show even though I have selected the option in QuickVPN?
View 1 Replies View RelatedI got a client who's getting a VOIP system installed into their/my network. The VOIP IT guys are demanding a separate static public IP address to be forward/made available to their router. They will put their phones on a different local subnet.
So here's what I've offered them and they refused:
1. separate PPPOE login; that way we share the modem and each router handles their own session (cleanest solution but they don't want to pay extra)
2. plug their router into DMZ of my WRV210 (they said they require publicly routed IP going direct to their device (but in this case they would have to assign my private IP as their WAN IP and all internet traffic would go to them unfiltered))
I have an ARRIS modem supplied by Comcast cable. I have an hp pavilion x1958 and want to run internet service to a secondary computer from the same modem. And I don't have money to buy a router. How can I do this the cheapest way?
View 3 Replies View RelatedCurrently I have 2 different modem running in my working area which is modem A and modem B. Whenever user from Modem A(192.168.0.1) or Modem B(192.168.0.10) would like to print or scan something using the shared printer, I need to manually plug the cable into either Modem A or Modem B depends on the network the user are currently using.How I do previously is only set DHCP on Modem A and disable DHCP for modem B so that Modem B will share DHCP assigned by Modem A. Both modems connect to the same Switch with the printer cable so both network user can use it together.But the problem now is I have to enable DHCP for both modems and causing the previously method can't be use anymore. So is there any other way that I can link both Modem A and Modem B with each assign different DHCP to link with 1
View 5 Replies View Relatedrouting mts usb modem to use internet in computer
View 1 Replies View RelatedHow to connect 2 cisco modem in 1 3com router.
View 6 Replies View RelatedCan I set up two wireless routers to one modem? If so how?
View 2 Replies View RelatedMy adolescent son wants to create a server to host video games. We, the parents, want to separate our computers and files from all the crazy security risks my son and his friends take, while allowing them to learn by their mistakes.I want 2 separate networks, or does this make sense? Would love to have our computers (assorted PC's, Macs, both laptops and desktops, running Vista Ultimate, Windows 7, OSX 10.5 and up), ipods, TV's, Blu-rays, wireless printers, etc. isolated from our son's computers, ipods, TV's, XBox, Blurays, wireless printers, (as well as the digital stuff his friends bring over).Since security is the reason for this, would love any tips over and above Brian Posey's article on Tech Republic (5 common security mistakes people make on setting up wireless networks, or something like that)We have Optimum high speed (testing up to 65 mps) internet service and 5 static IP addresses to work with.
View 4 Replies View RelatedRecently I had changed my ISP and I get a brand new modem and a D-Link DIR-615 wireless router, but the problem is the wireless signal is not strong enough to reach second floor, so I decided to get a new TP-Link TL-WA901ND access point and after configure the AP to repeaters mode, I saw it has traffic coming throughout to the AP but my PC cannot get any internet connection not even an IP address. When I was facing this problem, I thinking of is that possible using my old wireless router which is TP-Link TL-WR841ND to have a internet connection working with D-Link wireless router, I had tried plug my TP-Link router LAN port to D-Link router LAN port with a network cable and setting into same IP range (192.169.0.xx) but cannot get any traffic getting through.
View 2 Replies View RelatedI have a Belkin N450BD that doesn't seem to want to connect with my Siemens modem. The WLAN cable is connected to the WLAN port on my router but the WLAN light on the modem doesn't illuminate.
View 1 Replies View RelatedCan I set-up the N300 wireless router without a modem, this I want to use for wireless printer connections only for several PCs
View 2 Replies View RelatedI was told by my Internet company that my router may not be compatible with my new modem (from them). I have a Basic Wireless Router. Model f7d1301. Purchased about 1 year ago. I was told that Belkin designs it this way so we have to buy a new one regularly. But 1 year!!! That is terrible. Is it true? Is this older router no good? I have purchased a new one and it seems to,have solved the problem. It does take me very happy that I already have to buy a new one....
View 1 Replies View RelatedIs it possible to put the SRP 527 into Bridge mode to use it just as a modem?
View 6 Replies View RelatedI reset the f5d9321 router and no connection with modem, power cycled the modem and router and still no connection with the modem. Pc and laptop can connect to internet by connecting to modem. The router worked fine 3 days earlier.
View 1 Replies View RelatedHow do I hook up a Belkin 750 Router to my modem when modem has only one plug?
View 1 Replies View RelatedCurrently, I have setup a demo lab with the UC320W + IP Phones and OnPlus Network Agent all connected to a SG300-28P. I have just obtained an SRP547W because I wanted to use the 3G/4G internet connection via the router as my demo lab is an isolated network.Now, I tried to a couple of 3G modem (UMG181) and 4G Telstra modem (MF821) on the SRP547W but none of these work. I had a look at the compatibility tableI guess those modem models are not listed there. However, when I went on say the Optus website to scout for a more compatible model, none of them hit it right on the mark. The matrix says it can support E180 (while Optus has the E188), E353 (while Optus has the E353). I have already wasted my money on getting the earlier stated 3G/4G Modems and I ain't going to take a chance again.
View 1 Replies View RelatedJust purchased a WRVS4400N and for about 6 hours last night tried to get it to work and connect to my cable modem...no success. Is there a setting im am overlooking? I have enough network experience to be dangerous but am not an expert. All other routers i have had in the past have been plug & play mostly. This one is making me want to throw it thru the window. When i plug it in to the modem it dosent even give me a link light that its connected, much less communicate with it.
System Details:
- WRVS4400N Connecting to a Arris TM722 cable eMTA modem
- all cables have been verified (100 times by now)
What i have tried:
- Cloning my PC MAC address
- Pluged in my old router (Linksys E3000) and it connects instantly (Same cables)
- Same as above with PC
- Changed a million settings in the router (to much to list at this point)
The modem Time Warner gave me several years ago was dying, I took it in, they gave me a Cisco modem, I plugged it into the computer, works fine, so then I plugged it into my airlink 101 wireless router, the computer recognizes the router but says there is no internet access, i.e. the modem and router are not communicating. Why would change of modem cause lack of communication with the router, is there something different about modems now compared with roughly 5 years ago? And what can i do to fix it so i can have wireless access again? If it matters, I have no protection on my wireless (because I never figured out how).
View 1 Replies View RelatedI connect to the internet through a Thomson TG585 v8 modem. When I log in to the modem's IP (192.168.1.254?) through a browser, I only get one task available, that is "Check connectivity for this internet service". As far as I know, I should have some management options, like for example to block websites, to limit internet service for certain devices etc... Does anybody knows why I don't have these options? Could it be a restriction from the Internet Service Provider?
View 2 Replies View Relatedhow do i open a port on Motorola modem
View 1 Replies View Related