Two Routers Connected To One Modem?
Nov 10, 2012
We have a standard surfboard modem and a standard wired router. I recently purchased a wifi-only tablet thinking I could connect to an ad-hoc hotspot. This however isn't the case and now I can't use my tablet at home.I'm going to buy an inexpensive wifi router and just have that dedicated for my tablet. I've read that you can connect a wifi router into a wired router, but it requires a lot of mucking about with the settings. Then I remembered the USB connections that modems and routers have.can you have one wired router connected to the modem via a standard cable and also have a wifi router connected to the same modem via a USB cable?
View 3 Replies
ADVERTISEMENT
Jan 18, 2013
I have a Belkin N450BD that doesn't seem to want to connect with my Siemens modem. The WLAN cable is connected to the WLAN port on my router but the WLAN light on the modem doesn't illuminate.
View 1 Replies
View Related
Jan 27, 2012
I'm planning to set up a network with two routers and one cable connection. One router will be for public wifi at my business and the other will be for my Point of sale system and private use. I think I have it figured out but want to double check the set up. Someone tell me if this isn't correct or if there's a better way of doing it.Cable modem --> connect via ethernet to Router #1 WAN port. Router #1 Lan port 1: connect via ethernet to router #2 WAN. Now, router 1 and 2 will have two different subnets; 192.168.1.x and 192.168.2.x respectively. Router #2 is the one that I should use for my private network and for the POS system since it can't be accessed by users from router #1 correct? I have DD-WRT installed on both routers but I plan on putting Tomato firmware for router #1 to limit bandwidth for public wifi and keep DD-WRT installed for router #2.
View 1 Replies
View Related
Jul 24, 2011
I have an RVS4000 V1 router connected to a Comcast Extreme 100 mbps cable modem.The port setting for the port (number 4) is 1000Mbps Full Duplex, auto Negotiate.why the RVS4000 is throttling the port?
View 3 Replies
View Related
Aug 23, 2011
My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
View 1 Replies
View Related
Jul 15, 2011
gain access to the internet from the wireless modem that is connected to one pc, by using a wireless router on the pc needing acces to the internet which is in a different room?
View 4 Replies
View Related
Oct 11, 2011
When I looked up the internet connection status, for the packets that I received 236, I only receive 30-40. When I click repair, it said the IP address already renewed. However, the internet still not working. When I use my laptop to browse the internet, it said the same thing, internet connected but cannot browse at all.
I tried so many things, such as clearing the DNS cache, releasing and renewing IP address, I did set the properties of the wireless connection to obtain DNS and IP automatically, I tried pinging, I turned off all my firewalls, I tried system restore, but still not working.
I run cmd /all, it got the following information:
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.0.1
When I did ping test, it said destination net unreachable, and later on I run ping test again, it said unreleased.
Later on, I did restart everything again, the packets that I received only 26, and didn't receive anything at all.
View 9 Replies
View Related
Nov 22, 2012
From last two days, my internet disconnecting frequently. Modem catching correct ip but no internet connection.modem catches correct ip address n other things, it shows connected to home network (i.e hathway) and internet access is allowed but browser display error 'webpage is not available' (same result for login page of ISP). I have tried different browsers but same result. windows network diagnosis center results as "your computer appears to be correctly configured, but the device or resource is not responding " OR "login.hathway.com is online but still not responding after couple of tries"(second error is not correct word to word tht was the over all meaning of it)In ping test, ping to default gateway gives very good result as 5-20ms but 'request time out' for url...So am not understanding whether it is my pc's problem or from ISP.I m using single pc with wired modem. windows 7 no changes made in network n sharing center.
View 2 Replies
View Related
Sep 9, 2012
I plugged in the USB from the Modem to my desktop and my desktop doesn't see the modem, I don't want the router to my desktop because it is interferring with my magicjack
View 3 Replies
View Related
Jun 2, 2012
There are 3 people in my house that are connecting to the internet by a single modem router, everything is fine when there is only 1 of us online , but when there are 2 or 3 of us online , our download & our upload speed dramatically decreases . So is there a way to maintain our normal download & upload speed even when all 3 of us are online ?
View 10 Replies
View Related
Apr 29, 2012
Can I connect blu ray player to motorola cable box via Ethernet port? My blu ray player won't work with wifi built-in router.
View 1 Replies
View Related
Nov 1, 2011
I have a 2wire modem and I'm using att DSL. The internet was working fine, I went out of town for 2 days, I returned to find my internet wont work. During the time I was out my brother said it hadn't worked for the 2 days. The modem works fine and all lights are green when my desktop is turned off or not connected. It even lets my brother use wireless on his laptop. However, when I turn on my computer or when I connect it to the modem with an ethernet cord, the DSL light will go red and not work.
View 7 Replies
View Related
Apr 22, 2011
A friend recently re-installed windows XP on their HP Laptop. They were connected wirelessly with a Linsys router (model wrt54g.1) and an RCA Cable Modem. The Cable ISP can ping the modem and gave me the IP address over the phone. I cannot ping the modem even when I take the router out of the loop. The network card (i1394) in the Laptop is functioning normally and I can see traffic on the modem (both the Cable Internet light and the PC activity light are flashing green) the ethernet port on the laptop is also flashing (amber). However I cannot reach the internet and cannot even ping the modem. The modem is brand new..
View 2 Replies
View Related
Feb 16, 2012
I am connected to the internet using a Huawei wireless USB modem connected to my desktop computer(no other type of service available) I would like to set up a Wifi home network so that I can connect using Wifi to all of the other gadget that I have in the house. So the question is can I connect a Wifi router using a ethernet cable comming from my desktop computer? and if so what router would you recommend for this application?
View 4 Replies
View Related
Apr 4, 2012
connect my PC/tablet with wifi router, I have bought wifi router which works with USB modem, when i connect my USB Modem i can see all the lights up (singnal- wifi, 2g/3g) and also showing in my laptop that is connect to wifi but unable to open the internet.
View 1 Replies
View Related
Aug 20, 2012
Just yesterday my laptop could connect to the Internet. Now it would just connect to the modem (via wi-fi), and there would be no Internet connection. All other computers in my house using wi-fi work fine.Here are my results when I type in the ipconfig /all in the command prompt.
Configuration IP de Windows
Nom de l'h�te . . . . . . . . . . : Loc-PC
Suffixe DNS principal . . . . . . :
Type de noeud. . . . . . . . . . : Diffusion
Routage IP activ� . . . . . . . . : Non
[code]....
View 6 Replies
View Related
Jun 8, 2012
I just moved into a new place and the cable company supplied me with a Motorola sbg6580 gateway and I have a netgear wnr3500l router with dd-wrt. because of location I have computers plugged into both devices (htpc and game consoles in the gateway, desktops in the netgear). how would i configure the gateway and router so everything sits on a single network AND the netgear with dd-wrt handling all the heavy lifting (port forwarding mostly)
View 2 Replies
View Related
May 19, 2011
My desktop recently broke so i bought my first laptop. I have AT&T DSL and i bought a new D-Link DSL-2640B modem/router so i could have wireless internet. I installed it and i was able to use it with the ethernet cable, however when i tried to use wifi, it worked for only about 2 minutes before it disconnected.. Now when i try again it says that it is connected (full 5 bars) but it also says there is no internet access and i cannot use the internet.
Also, before, with the old modem i was able to just connect the ethernet cable to the laptop and just start using the internet. Now i have to connect by putting in my username and password provided by my ISP almost like if it was dial up. I don't know why i have to do this now but not before.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, Intel64 Family 6 Model
[Code].....
View 4 Replies
View Related
May 24, 2012
I am able to connect to internet using micromax modem having aircel sim.But "no network access" message is shown and so i am not able to accesss any website.
View 1 Replies
View Related
Jan 15, 2012
I usually connect my PS3 to a switch which then goes to the BuT Home Hub and it works fine. However, I want to connect the PS3 directly to my Hub but when I plug it in to the Hub, it doesn't connect to the internet at all. Is there something I have to configure in order to get it to work?It is a PS3 160 GB Slim with Firmware 4.0.
View 2 Replies
View Related
Jun 22, 2012
I just moved into a new house.The house is wired with cat5e.my plan was to connect my cable modem to a multiport router. All of the cat5e cables will connect here. I planned on having my wireless router connect into a cat5e rj45 plug in the house. my laptop knows the wireless is there but it can't communicate.What do I need to do to allow communication?IP and subnet addressing
View 1 Replies
View Related
Apr 3, 2012
So i have recently upgraded my internet connection and was not gettting my advertised speeds, i called charter and they said to hook directly to my modem and i reluctantly agreed thinking nothing would change, man was i wrong! I use two sites to test, one was speedtest.net and here is the result:
Modem+router:
16mb's download
4.2mb's upload
Modem only:
29.00mb's download
4.2mb's upload
[code]....
View 2 Replies
View Related
May 23, 2012
I just bought a WRT54GL router, and am following the CD instructions for installation. Everything is connected according to picture (cable to modem to router to computer), and my phone and computer are working properly. However, the router is telling me that it cannot connect, and to check the ethernet connection.earlier a screen popped up to enter a password, but it was under the checking status screen, so I was not able to enter one. how to get the modem connected.
View 3 Replies
View Related
Jun 9, 2011
I have been using my DIR-655 for about 2 weeks now with Road Runner wideband services. Starting yesterday my internet became very slow and I discovered the cause was the router. I tried resetting it to factory settings and things will be fine and run smoothly for about 5-15 minutes but after that it goes back to being extremely slow. My speed tests would go from 10ms (normal) to 250-450ms. Before this issue occurred the Dlink was perfect, had full speeds. I am running a wire Ethernet connection.
I am currently using revB and tried upgrading firmware to 2.01NA which had no effect, but make my internet seemingly go back to normal for the first few minutes then nosedive again. I have also changed my speed/duplex settings in Network Config to 1gbs Full Duplex. I've also disabled QoS, and still no change. Not sure what else to do. When directly connected to the modem everything seems fine. The modem is also the provided Motorola SBG6580 which I have called Time Warner to set the modem into bridge mode and have the DIR-655 connected to it.
View 12 Replies
View Related
Dec 1, 2004
I have a cisco 2610 router connected to satellite modem (CDM-600). Cisco has NM-2W module with WIC-2T card, one port of this card is connected to modem via CAB-SS-530MT=, chassis WIC slot is filled with 2MFT-E1. Everything works fine for several hours. Then serial interface (connected to modem) goes down, and never comes up. I see following messages in the log. [code]
View 4 Replies
View Related
Jul 22, 2011
I have build topology like this:
host------c2950(f0/3)------(f0/4)c3550(f0/41)----modem-----Internet
I wanted to monitor c3560 port where modem is connected from host. So for that I configured rspan. configurate show below. But problem is that after configuration f0/4 of c3550 remains up and f0/3 of c2950 goes down. WHen I look at status of f0/4 it show "FastEthernet0/4 is up, line protocol is down (monitoring)". I tried to search websites It seems configuration is fine.
[code]...
View 1 Replies
View Related
May 26, 2011
everything was all good, my brother went crazy and unplugged everything.it effects our house phone too, that could be the problem.i just dont know what wires went where. all the wires are the same color.but i know which is which. just again, dont know where.i would like to get it done before he gets home later on.
View 1 Replies
View Related
Jun 10, 2012
So I have a Westell 7500 Modem/Router with Century Link DSL. I've been running a couple of laptops and my wifi enabled TV on the wireless. A few days ago I got a new desktop PC (Windows 7) and plugged the ethernet cable into it. Everything was great but the wireless was a bit slow for the TV so I plugged that in with an ethernet cable too. No problems for a few days. Today, we had a power blip and everything reset and I noticed that the internet light on the modem was solid red and I couldn't access the internet on any machine (ethernet or wifi). I called the ISP who said there was an outage in the area. A few hours later, solid green light on the modem BUT the TV (ethernet connected), my iphone, and my laptops could NOT connect, despite the network showing up with a full signal. Oddly, my new PC, connected via ethernet was fine so I played some Diablo (side note). Here's the deal: the new PC connects just fine but nothing else will. If I unplug the ethernet cable to the PC or disable the LAN connection, the red internet light appears on the modem. It seems as though the PC has hijacked the modem in some way. Even the TV won't connect with the ethernet cable. The only way the internet works now is if the modem is connected to the new PC. I've done all the resents - unplugged the modem and let it sit for 10-15 minutes, accessed the router settings, etc etc. Why would this start happening now after everything was working well for several days and how do I fix it? I need the wifi connection! Update: Plugged my Macbook Pro into the ethernet cable (took it out of new PC) and it works.
View 1 Replies
View Related
Nov 27, 2011
My neighbor is using my Belkin Router the basic one and has comcast. We both use his internet and have had no problems until the past 3 days. He just got the home phone service from comcast and the phone line is setup through the modem. Ever since comcast came to his apartment and set this up the home phone service to his modem the router is connected but there is no internet access. What is going on and how can I fix this. He has an HP with windows Vista and I have a Toshiba Satellite L675 that has Windows 7 Home premium edition on it.
View 1 Replies
View Related
Nov 7, 2012
Today I purchased a Motorola SURFboard extreme Cable Modem DOCSIS 3.0 in order to replace my old modem which is out of date and has been very slow as of late. I connected the coaxial cable, Ethernet cable(to Linksys wireless router), and power expecting it to simply work. All four lights came on green (power, downstream, upstream, connectivity). The downstream light turned blue which indicates a bonded connection.The device light was blinking on the modem. I connected to my wireless router, but no internet access. I then tried connecting my laptop to the modem directly via Ethernet cable, still no access. I think that rules out the router being the problem. I also ruled out my laptop being the problem as the same thing is occurring with my other laptop and desktop. I called my ISP (Cox Cable) and had them re-establish connection with my modem, this did nothing. I thought for sure this meant I had purchased a faulty modem; I hooked up my old modem and the results were the same, the modem connected fully with no problem (all four lights were green) but I have no internet access.
View 3 Replies
View Related
Aug 27, 2011
I have two ASA 5505's. One is currently setup as my firewall connected to the Cox Cable modem and wireless AP. I have another ASA that I would like to use, I have an idea that I could set that one up as a VPN unit, but not sure how I could do that. If that is not an option, can you provide the command line instructions on how to setup the VPN via the console cable. [code]
View 1 Replies
View Related
Apr 21, 2013
I have one interface setup to a Cisco 2921 router connected to a Cable modem.DHCP is on the 2921.when I connect to the ssid for my guest i'm redirected to the authentification portal 1.1.1.1 .i'm putting valide credential and when pressing the submit button .. it just go anywhere.
I have setup another SSID with a psk and it's working fine.. getting ip and able to browse internet.From what i have read... it's apparently DNS issue on my router.. but what should I check.
View 4 Replies
View Related
May 8, 2011
I own a Broadcom BCM5354-based wireless router (Tomato 1.27 flashed) and an Aztech DSL605E modem. When both are powered up, the wireless router sometimes doesn't get internet access because the modem automatically logs itself in. I have to plug the modem cable to my laptop, manually disconnect the modem, and plug the modem cable back to the router to fix it.
View 2 Replies
View Related
