From last two days, my internet disconnecting frequently. Modem catching correct ip but no internet connection.modem catches correct ip address n other things, it shows connected to home network (i.e hathway) and internet access is allowed but browser display error 'webpage is not available' (same result for login page of ISP). I have tried different browsers but same result. windows network diagnosis center results as "your computer appears to be correctly configured, but the device or resource is not responding " OR "login.hathway.com is online but still not responding after couple of tries"(second error is not correct word to word tht was the over all meaning of it)In ping test, ping to default gateway gives very good result as 5-20ms but 'request time out' for url...So am not understanding whether it is my pc's problem or from ISP.I m using single pc with wired modem. windows 7 no changes made in network n sharing center.
I usually connect my PS3 to a switch which then goes to the BuT Home Hub and it works fine. However, I want to connect the PS3 directly to my Hub but when I plug it in to the Hub, it doesn't connect to the internet at all. Is there something I have to configure in order to get it to work?It is a PS3 160 GB Slim with Firmware 4.0.
When I looked up the internet connection status, for the packets that I received 236, I only receive 30-40. When I click repair, it said the IP address already renewed. However, the internet still not working. When I use my laptop to browse the internet, it said the same thing, internet connected but cannot browse at all.
I tried so many things, such as clearing the DNS cache, releasing and renewing IP address, I did set the properties of the wireless connection to obtain DNS and IP automatically, I tried pinging, I turned off all my firewalls, I tried system restore, but still not working.
I am connected to the internet using a Huawei wireless USB modem connected to my desktop computer(no other type of service available) I would like to set up a Wifi home network so that I can connect using Wifi to all of the other gadget that I have in the house. So the question is can I connect a Wifi router using a ethernet cable comming from my desktop computer? and if so what router would you recommend for this application?
connect my PC/tablet with wifi router, I have bought wifi router which works with USB modem, when i connect my USB Modem i can see all the lights up (singnal- wifi, 2g/3g) and also showing in my laptop that is connect to wifi but unable to open the internet.
Just yesterday my laptop could connect to the Internet. Now it would just connect to the modem (via wi-fi), and there would be no Internet connection. All other computers in my house using wi-fi work fine.Here are my results when I type in the ipconfig /all in the command prompt.
Configuration IP de Windows
Nom de l'h�te . . . . . . . . . . : Loc-PC Suffixe DNS principal . . . . . . : Type de noeud. . . . . . . . . . : Diffusion Routage IP activ� . . . . . . . . : Non
My desktop recently broke so i bought my first laptop. I have AT&T DSL and i bought a new D-Link DSL-2640B modem/router so i could have wireless internet. I installed it and i was able to use it with the ethernet cable, however when i tried to use wifi, it worked for only about 2 minutes before it disconnected.. Now when i try again it says that it is connected (full 5 bars) but it also says there is no internet access and i cannot use the internet.
Also, before, with the old modem i was able to just connect the ethernet cable to the laptop and just start using the internet. Now i have to connect by putting in my username and password provided by my ISP almost like if it was dial up. I don't know why i have to do this now but not before.
Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Home Premium , 64 bit Processor: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, Intel64 Family 6 Model
I am able to connect to internet using micromax modem having aircel sim.But "no network access" message is shown and so i am not able to accesss any website.
I have been using my DIR-655 for about 2 weeks now with Road Runner wideband services. Starting yesterday my internet became very slow and I discovered the cause was the router. I tried resetting it to factory settings and things will be fine and run smoothly for about 5-15 minutes but after that it goes back to being extremely slow. My speed tests would go from 10ms (normal) to 250-450ms. Before this issue occurred the Dlink was perfect, had full speeds. I am running a wire Ethernet connection.
I am currently using revB and tried upgrading firmware to 2.01NA which had no effect, but make my internet seemingly go back to normal for the first few minutes then nosedive again. I have also changed my speed/duplex settings in Network Config to 1gbs Full Duplex. I've also disabled QoS, and still no change. Not sure what else to do. When directly connected to the modem everything seems fine. The modem is also the provided Motorola SBG6580 which I have called Time Warner to set the modem into bridge mode and have the DIR-655 connected to it.
My neighbor is using my Belkin Router the basic one and has comcast. We both use his internet and have had no problems until the past 3 days. He just got the home phone service from comcast and the phone line is setup through the modem. Ever since comcast came to his apartment and set this up the home phone service to his modem the router is connected but there is no internet access. What is going on and how can I fix this. He has an HP with windows Vista and I have a Toshiba Satellite L675 that has Windows 7 Home premium edition on it.
Today I purchased a Motorola SURFboard extreme Cable Modem DOCSIS 3.0 in order to replace my old modem which is out of date and has been very slow as of late. I connected the coaxial cable, Ethernet cable(to Linksys wireless router), and power expecting it to simply work. All four lights came on green (power, downstream, upstream, connectivity). The downstream light turned blue which indicates a bonded connection.The device light was blinking on the modem. I connected to my wireless router, but no internet access. I then tried connecting my laptop to the modem directly via Ethernet cable, still no access. I think that rules out the router being the problem. I also ruled out my laptop being the problem as the same thing is occurring with my other laptop and desktop. I called my ISP (Cox Cable) and had them re-establish connection with my modem, this did nothing. I thought for sure this meant I had purchased a faulty modem; I hooked up my old modem and the results were the same, the modem connected fully with no problem (all four lights were green) but I have no internet access.
I own a Broadcom BCM5354-based wireless router (Tomato 1.27 flashed) and an Aztech DSL605E modem. When both are powered up, the wireless router sometimes doesn't get internet access because the modem automatically logs itself in. I have to plug the modem cable to my laptop, manually disconnect the modem, and plug the modem cable back to the router to fix it.
Every day for the past week my Internet access goes down. I have a netgear router connected to Comcast modem. I have to reset the modem then the router constantly and it gets irritating. I called comcast and they say reset them. But why should I have to constantly reset.... Sometimes I just ignore it and it comes back up later... what is going on??
I was very happy working with my WRT610N connected to the ethernetport of my previous internet modem. Recently I had to switch to a new modem CISCO EPC3925. Unfortunately this combination does not work anymore. I don't get an internet connection on my WRT610N anymore. I therefore have to connect all computers (LAN and WIFI) to this EPC3925. Especially for the WIFI I'm not fully happy. My IPAD2 sometimes does not want to connect, a problem which never occurred when connecting to WRT610N.
I probably need to change a setting, but where? In the EPC3925 or in WRT610N?
I'm having 3 desktop computers. Out of these three, one PC (PC1, windows7) is connected to internet modem and other two (PC2 with XP,PC3 with XP) are sharing internet connection.
In PC1 I've installed Hamachi Logme In (virtual network). This software also creates one "Hamachi Network Interface" in "Network connections".The Problem is that each time I start/reboot PC1, I get connected to other 2 PCs but can't share internet connection, until I toggle (enable/disable) the state of "Hamachi Network Interface"
(PC1 is at some distance with PC2 and PC3, and each time I need to remotely login to PC1 and toggle Hamachi network in order to access internet).
no matter what device is used to connect to our Linksys WRY54G v2.0 Router, whether it be CAT6, internal wireless card (Intel Wireless LAN (802.11a/b/g/n), or USB wireless card (Linksys AE1000), she drops connections at random and frequent times and has to disconnect the device and reconnect to get internet back. She is still connected to the network though. The issue has been becoming more and more frequent the past few days and has been ongoing for a few months. We are at wits end with the issue. I looked on Linksys' website for updated firmware for the router AND the AE1000, no new firmware and same driver that is installed for the AE1000. We have tried to enable Multimedia Environment, Disable 802.11, unchecked "Automatically turn off device to save power", changed router channels from 6 to 1, have uninstalled ALL third party firewalls and AV/Spyware/Malware/Adware removal programs (but not before scanning the system), and lastly tried the DHCP Braodcast Flag Fix.
I called my internet provider to come fix the problem and my internet was working PERFECTLY. Until, it started to mess up again. I don't know, what's wrong with it AT all. The Linksys box is working fine, the ROUTER is working BUT, my internet keeps dropping and takes HOURS upon HOURS to come back on, UNTIL I reset the Linksys box. Then it stays on for a bit. A few hours or a few minutes then suddenly, "No internet access."
So, for some reason my internet connection started disconnecting about every 1-5 minutes. It worked fine this morning, however, when I turned my PC on a few hours ago it became very unstable. After it happens I have to reconnect to internet (it doesn't work all the time, I usually have to do it two times for it to work), and then again after a few minutes the connection dies. Tried restarting my computer, tried restarting the modem, tried the troubleshooting network thing (it keeps saying "Local Area Connection doesn't have a valid IP configuration", but gives no solution). Also, I tried connecting on my cellphone and on a laptop and both of those work. However, those connect through WiFi, while my PC is connected through an ethernet cable[code]
I usually acess internet on Wi-Fi, and now I have travelled, and got my laptop with me. The internet here is Local Are Connection, the one with the cable, and it says I am connected, 100 Mbps, but no internet access! I can't browse or open anything that has to do with the internet... However, It works perfectly fine on EVERY other laptop. I've searched a lot of places and I've been told to write commands like ipconfig/ all andd netsh int ip reset.log but when I do that I get "The following command was not found : int ip reset.log" I set the properties in TCP/IP to Automatically detect settings .. but nothing.
I literally just got my hp 2000-410US notebook pc laptop and I just connected it to my Belkin router. For some reason, my new laptop would not connect to the internet even though I am connected to the router. I have another laptop which is a hp G42-410us notebook pc but it connects perfectly. I already set up my settings for the new laptop but I am not sure if I missed something during the setup that allows me to use the internet.
My PC is hardwired to a Comcast all in one Internet/Phone Modem/Wireless Router. I have installed new software on my Android Phone that can control my music recording software over Wi-Fi. Here is the rub: Recording software and the Internet don't play nicely together. They are in constant conflict for resources. I used to simply disable my network connection when working in my recording software. This obviously won't allow my phone to connect to my computer . Is there a way to disable my Internet connection yet remain connected to my network? I don't want to disable the entire networks Internet connection since there are other Internet users on the network.
I have 2 pc's this one is obviously hooked up to the net, the other one works fine, but when i try and plug it into the modem it tells me no internet connection even when i unplug this one and plug the other in.
Setup and Hardware D-link DSL-502T Belkin N Wireless Router (No wired connections) Computers on wireless Connections
No.1 Connected to the Belkin & Internet working
No.2 Connected to the belkin & Internet NOT working Tenda W322P Wireless PCI adapter installed OS - XP SP2
When I attempt to connect to the internet on computer No.2 it will not connect.
1. Belkin setup page shows both computers in the DHCP client list 2. Tenda shows connection to the personal network 3. No internet connection icons in the tool bar. There is an internet connection icon on computer No.1 showing two computers and a bubble. 4. No icons in 'Network Connections' 5. In 'My Network Places' there is a Belkin Icon but when properties is clicked it says "This item is not currently on your network".I may have accidentally deleted icons from network connections or some of the associated folders.
I have a CDMA compatible modem which connects to my Desktop PC via USB.it works fine, but I'd like to share my internet connection with another Laptop, Wirelessly via a Router. The router connects to my Pc via Lan cable. I activated Internet Connection Sharing in the properties of my modem and connected it to the Internet.I hoped my Router would detect an Internet connection on My network and would enable internet connectivity on My wireless AP on the Router. But it didnt. is that windows refelcts "internet access" on both the actual Wireless network on my Router ("49 network") , and on both the Physical Connection to my pc via the Ethernet port ("3G Router") my laptop connects to the router, but without access to the internet, and I keep getting an 'unable to resolve host' message in my Browser. Suspecting my Router of somehow causing the problem I also tried setting up an Ad hoc network instead (using my wlan card to interface with the Laptop directly). They connect fine, and my Printers and other shared resources all appear, but the wireless range between them is like bluetooth compared to the great range of my router.& I still cant manage to share an Internet connection between the two machines!
While I was out of the house, my father rearranged the network cables a bit. I don't know what he has done exactly - He says nothing more then pulling and untangling.
When I came back home, my internet connection changed its IP from 192.168.0.205 to 169.254.197.233. The speed changed from 1Gbps to 10Mbps. It has also been at 100Mbps for a while. My subnetmask changed from 255.255.255.0 to 255.255.0.0. The standard gateway changed from 192.168.0.1 to no standard gateway. My DNS servers remain the same.
I have checked the lights of the UTP ports, and it looks like it's only sending a heartbeat every few seconds.
All the cabling is gigabit, my network card is a Realtek RTL8168C(P)/8111(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20). THe modem is a CBN SVG6540E.
I have an Inspiron Mini 1018 which all of a sudden I cannot get internet access but I do have the wireless network as being connected. It was working fine but all of a sudden I can't get onto the internet. Have run diagnostics but it doesn't pick up any problems.
I have to used the comsats Internet modem and connect to three Access Point for using the wireless internet but when using the wireless internet then they occur the problem and breake the connection for few minute.
I have a big 2 floor house .I would like to use 3G connection using USB type of modems,like vodaphone or MTS. which router to be used so that I can get good connectivity on both floors. NOTE- I do not want to use cabled internet coonections.
Is there a way for me to connect my desktop PC to my laptop, & use the laptops EDGE/GPRS modem in the PCMIA slot of the laptop to access the Internet? I also have a wireless router that is not being used for anything, however, I use the laptop to get online, & I'd like to share that connection with my desktop at home.
