Installed Windows XP On Alive 6100 - No Internet?

Sep 20, 2012

I Installed windows XP on my Alive 6100 computer, and now it wont detect my ethernet cable. I tried updating the drivers off the ECS website but nothing works. I cant go through ethernet or wireless, probably dont even have the drivers (I Installed the ones listed on the site).

View 2 Replies


ADVERTISEMENT

Re-installed Windows XP Pro On Cpu Can't Connect To Internet Or Network?

Dec 27, 2011

I just re-installed Windows XP Professional on my Dell XPS Gen 4. Everything works fine on it but the internet. I can open IE, but it just says "This page cannot be displayed" and on and on.Since I re-installed it I believe their are not many drivers on it, I don't really know, and I think that might be it but I am not sure. And I am not sure which drivers I need if it is missing drivers.

View 7 Replies View Related

Installed Windows 7 - Broken Internet Connection?

Oct 27, 2011

Same problem on Dell Inspiron 530. Thinking about inserting a new network card.

View 3 Replies View Related

Installed Windows 7 Now Have Broken Internet Connection

Feb 25, 2011

For about two months now I have been experiencing a problem with my Internet connection. It started when I upgraded my Dell Inspiron 530s from 64 bit Vista to 64 bit Windows 7. After a day, I started getting the "Local Area Connection: A network cable is unplugged or broken internet connection." However, the cable is not unplugged. My other PC and laptop (which is wireless) can connect to the Internet, so I know it's not my ISP or my router. It only happens about every other day. It would work perfectly on day and other day I would go to my internet and I would have no connection. The weird thing is that when I restart my computer, it connects right away. My other two computers that was upgraded also does not have this problem.

First, I thought it may be the cable, so I replaced it with another cable I had. No luck.Then I thought it may be the port on the router, so I plugged it into one of the other ports (including the port that the working PC was plugged into). Next, I checked Device Manager > Network Adapters > Intel(R) 8256v-2 10/100 Connection. There is no exclamation point next to it. Plus, under Properties, it indicates that this device is working properly.I shut down all my computers, and unplugged the dsl modem and router. I waited a few minutes and then plugged in the modem, followed by the router. Once both of those were fully booted, I turned my computers back on. Still after a few hours, I lost connection.Following this, I went to Run, typed "cmd" and then "ipconfig." Under Windows IP Configuration, it reads:"Ethernet adapter Local Area Connection: Media State.........: Media Disconnected."

View 16 Replies View Related

Linksys Wireless Adapters :: AE2500 Installed In Windows 7 Machine - Dropping Internet Connection?

Mar 4, 2012

I am having problems after installing the ae2500 adapter in my win 7 machine had to remove malwarebytes and avg to get it to work but now it constantly has problems dropping the internet connection. I have to disable the adapter then enable it to reconnect to the internet. Are there other compatibility problems with this setup that I need to address?

View 1 Replies View Related

Westell 6100 - Modem Connects To Internet But Router Does Not?

Apr 20, 2011

I'm unable to access the internet when I plug my modem (Westell 6100) into my router (Netgear WPN824). It works perfectly fine when I connect my modem directly to my computer though. It was working perfectly last night and for the last few years up until now.

I've tried sequencing, turning off my modem/router/pc while waiting two minutes in between each step but it doesn't work. I'm 100% sure the log in and password information to log in is correct (I use PPPoE to access the internet). I've tried resetting the router to factory settings and going through the setup but I get the same result. (Unable to connect)


OS: Windows XP
ISP: Verizon DSL/PPPoE
Modem model: Westell 6100
Router: Netgear WPN824

View 7 Replies View Related

Ping To Keep Alive To Monitor If Provider Lost His Connection To The Internet

Oct 11, 2011

I have a dual wan router with a main cable modem for high speed and a backup adsl modem hooked just in case. The problem is that quite often it seems that my ISP loose his connection to the internet but communication is not lost between my ISP and my modem and router. Because of this, my router doesn´t do the automatic changeover from my WAN 1 to my WAN 2 hooked slower ADSL modem. My router has the ping to keep alive option checked on the WAN 1 setings using my Cable ISP provided IP address.How can I force my router to notice that my cable ISP lost his connection to the internet and do right away the changeover from his WAN 1 to his WAN 2 input?

View 1 Replies View Related

Lost Internet Connection When Setting Westell 6100 Modem To Simply Bridge To Router?

Aug 1, 2011

Earlier today I attempted to change the setting on my Westell 6100 modem such that it would simply bridge the connection to my Linksys WRT54GS router, basically involving setting the router to bridge only and turning DHCP off. Now I no longer get an internet connection through my router when previously the connection had worked perfectly fine before. I following the steps of cloning the MAC address to the router and have done the proper resetting steps (computer, them router, then modem) but I simply can't get an internet connection through my router. The process to set up simple bridging from the modem what supposed to end up with the internet light no longer turning on but the light turned back on following one of the resets.

Currently, I can connect to the internet through the modem just fine but I get nothing when I include the router. I'm not sure if there are some other settings I'm supposed to be changing as I can't seem to find anything past what I've already done when researching online. At this point I would just be happy reverting the settings I've changed but I don't know how to access the modem now that DHCP is off.Basically, I'd prefer to be able to get the router working with these new settings but if that proves too difficult (as I've heard it can be when trying to get Westell modems to work with Linksys routers) I'd like to learn how to access the modem and change the settings back to what they were (preferably in as simple terms as possible as I don't particularly understand what a lot of these settings/configurations do).(And a bit of an aside, but I had attempted to do this modem bridging to "fix" perceived internet speed problems. I've been averaging around 300Kbps download rates ever since I've had this internet connection from Verizon when the supposed download rates should be between 1MB and 1.3MB. Doing this modem bridging had been reported to fix some modem/router conflicts and improved connection speeds for some.)

View 5 Replies View Related

Creating LAN Between 3 Computers With Windows 7 Installed?

Mar 2, 2013

i want to create a LAN between 3 nos of windows 7 installed computer

View 2 Replies View Related

Installed Windows 7 - Wireless Card Has Vanished

Sep 14, 2012

I'm off to university on Monday but I couldn't afford a laptop (I have a huge Dell gaming desktop!) so my awesome parents gave me their little Acer Aspire One D260-A netbook; Intel Atom Processor N450 (1.66GHz, 512K), 1GB, 160GB HDD. It's a couple of years old, was running XP and literally everything was broken - no sound, no backlight, faulty touchpad etc. - so first port of call was a clean install of Windows 7 and updating every driver (and BIOS) off the Acer website from a USB.Problem is, everything is running like a dream... except for the wireless. When I tried to install the latest Atheros drivers (doing all of this from a USB due to lack of connectivity) I received a Code 10: driver cannot start error, so after some troubleshooting I was pointed towards different drivers, only for Windows to inform me that it can't find the hardware.

Looking in devices, I'm seeing an Atheros Ethernet connection device but the wireless card seems to have taken a walk. Xirrus isn't seeing anything either. My current internet is between Virgin and BT (mine and my partner's house) but we move in together on Monday and we'll be setting up Sky, so I can't give you much information on internet. I do have an ethernet cable I can plug into our Virgin wifi home router (D-Link DSL-2640R Broadband Wireless G ADSL2+) if need be. One of my main problems seems to be finding the correct drivers as due to the wireless card disappearing, I'm not sure how to tell what the wireless hardware actually is.

Here are the finer details:

C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : CJ-Netbook
Primary Dns Suffix . . . . . . . :

[code]....

View 11 Replies View Related

How Many Images Can Be Installed On Windows Deployment Services (wds)

Feb 21, 2013

WDS allows you to capture and deploy images on a network to client pcs. I Was wondering how many images wds allows you to capture and deploy and if there were any work a-rounds that would allow you to deploy more.

View 1 Replies View Related

Network / Ethernet Controller Not Installed After Reinstalling Windows 7?

Oct 31, 2011

I just reinstalled windows 7 on my Intel i3 M380 laptop, and now I cannot connect to the internet wirelessly and I can't connect with a ethernet cable. In device manager, it says those devices aren't installed. I can't install them because the laptop has no internet. I can't seem to find the drivers for them either on intel. Seems like the reinstallation deleted my network adapter.. I can't find the correct link on intel.. I've tried like 3-4 on my laptop and none of them seem to work..

View 1 Replies View Related

Windows Did Not Find Properly Installed Network Adapter

Nov 12, 2011

months ago, i installed a USB card so that my dvd burner could run at 2.0 or 3.0. it has worked fine. every now and then the card becomes unlodged from inside the computer, and i have to push it back into the slot.Tonight, while the computer was on, i was putting it back in, and it popped all the way out, my computer shut down and when i restarted it, i got the error message "windows did not find properly installed network adapter/ if you have network adapter update/re-install drivers"Only problem i have is when i go to device manager, i see NO network adapter?

View 8 Replies View Related

No Properly Installed Network Adapter / Windows 7 64bit

Oct 2, 2011

I purchased a new built system, worked great 5 days, major trojan forced a reformat of drive. Now Win 7 64 Device Manager is empty- no network adapter found - I get the notice that "there are no properly installed network adapters". I use the on-board network adapter on the mobo, no plug in network card, hard wired to DSL -- like I said, it worked fine for a few days now it's GONE after reformat.

View 10 Replies View Related

Windows Did Not Detect A Properly Installed Network Adapter

Nov 11, 2012

My laptop keeps saying "Windows did not detect a properly installed network adapter.If you have a network adapter, you will need to re-insatll the driver". I've found the right one and it still want install. Says it's the wrong one but i'm pretty sure it's the right one. I just did a fresh install where i put windows 7 extreme on a laptop and i can't seem to ge the right drivers i guess. I don't know if it's the wrong driver or a bad NIC Card.

View 1 Replies View Related

Avast / Windows Defender Installed - Wireless Authentication Failed

Jul 6, 2012

While the home PC and my brother's laptop can connect to the wireless internet, my sister's laptop has never been able to. The antivirus software installed is Avast! and there is also a Windows Defender. It can connect no problem using an ethernet cable.

View 3 Replies View Related

Dell :: Inspiron 15r Network Controller Not Installed After Windows 7 Reinstall

May 18, 2013

i have to re-installed windows 7 on my Dell Inspiron 15r but now can't connect to the internet, the device manager shows the network controller in not installed at well as the PCI Simple Communications Controller.

View 1 Replies View Related

Dell :: 5010 Install Bluetooth For Newly Installed Windows 8

Apr 28, 2013

install Bluetooth for my newly installed Win8.I tried all the posted links for Bluetooth.I have Win8 on Dell Inspiron 5010, so which one will be suitable for it?

View 7 Replies View Related

Dell :: Inspiron N5010 - Re-installed Windows 7 Home Premium But No Wireless Connection?

Jul 21, 2012

I'm trying to figure out what my network card is called and how I get drivers for it. Here is my computer model:

Dell
P10F001
Inspiron N5010
It is a laptop.

View 9 Replies View Related

Dell :: Inspiron N5110 - Missing Network Controller Driver After Re-installed Windows 7

May 16, 2013

I have to re-installed windows 7 32- bit on my dell inspiron n5110

View 1 Replies View Related

Cisco WAN :: N7k Keep Alive Link In VPC?

May 5, 2013

We setup two n7K as core switches in our network. We configure VPc peer link as well successfully. We are using mgmt interface of supervisors as a peer keep alive interface, so what happen when this keep alive gets down? Are we loss Vpc peer link between both nexus 7 K?

View 1 Replies View Related

NAT Keep Alive Function Is Available On The Netgear WPN824?

Apr 13, 2011

aware if the NAT keep alive function is available on the Netgear WPN824. If so where can it be accessed?

View 1 Replies View Related

D-Link DIR-615 :: Keeps Disconnecting Alive Session?

Apr 29, 2011

I log in to work from home and if I am inactive for 5-10 minutes, I lose connection to my work server.  If I bypass the router, this problem doesn't happen.  How I can change settings to keep my session alive? 

View 15 Replies View Related

Cisco Firewall :: ASA 5510 VPN Keep Alive

Apr 12, 2009

I wanted to know if there was a way to keep a tunnel active 24/7 on the ASA 5510?  My ASA is connecting to PIX 501's, Sonicwall TZ170 and 3com X5(not sure if that matters though).

View 5 Replies View Related

AT&T Westell 6100 Modem Changing IPs Over And Over?

Mar 28, 2012

At my home I have a Westell 6100 DSL modem connected to a computer.AT&T is the ISP and all filters are installed.I use my home computer via VNC applications from a remote location and I began to notice that the VNC local client session was being lost,,,over and over.It was discovered that the WAN IP was changing over and over and happens about once every 5-10 minutes,,,or so. While I have a dynamic WAN IP from ATT, I would not expect the WAN IP to change as often as 7-8 (or more) times a day. At first I thought it was ATT changing my DYNAMIC WAN IP.But, a review of the Westell log file is reporting lost connection(s),,,,,etc, etc,,,,,etc. over and over.Below is a list of the Westell log information showing several hours of behavior.The Westell diagnotics that were run and the SELF test run as expected.Looks like the DSL modem is going bad, a filter is bad, or the line is going bad and needs to be balanced,,,,etc..

Code:
All Entries
CURRENT MODEM STATUS
DSL Modem Status....... Up
PPP Session Status...... Up
Connection Type......... PPPoE
Time set from............. Local

[code]....

View 2 Replies View Related

Security Key For Westell 6100 Modem?

Aug 1, 2011

Where do I find security key for modem Westell 6100?

View 3 Replies View Related

6100 - How To Track A Dynamic IP Address

Apr 12, 2011

how can I track a dynamic IP address. The reason why I am asking is because my dad lives about 40miles from me and I would like to logon to his computer from my apt and my dad is currently using frontier dsl connection with a westell 6100 modem. Is there any software or what do I need to do to configure this?

View 6 Replies View Related

Installed Ubuntu 10.10 - Can't Connect To Internet

Mar 10, 2011

I just installed ubuntu 10.10 and I'm unable to connect to the internet. I checked for device recognition and the output is DISABLED which apparently means that my network device may be turned off. How can I turn it on. Windows is no longer installed. By the way I'm an ubuntu newbie. Hence, I wiped my hard drive during installation.

View 1 Replies View Related

Westell 6100-linksys Wrt54g Dd-wrt Configuration

Mar 23, 2012

i recently reflashed a linksys wrt54g v2.0 with dd-wrt (the latest stable release. i cannot for the life of me seem to configure it so that it works properly with my westell 6100 verizon modem. i would like to do so without placing the modem in bridge mode, as i had it set up prior to the reflash. this way i can remove the router when not in use.

my router settings:
wan connection type:auto config-dhcp
stp:disable
routername:DD-WRT[code].....

View 13 Replies View Related

Cisco Application :: Keep Alive Limitations On ACE 4710 And Module

Oct 20, 2011

I wanted to find out how many times can I apply a healthcheck in a single context. I have 50 farms that are using the same port and instead of creating 50 different healthchecks, I want to just create 1 healthcheck for the 50 farms and apply it to each farm. I also need to know if the same limitations (whatever they may be) is the same for the 4710, ACE20 and ACE30.

View 1 Replies View Related

Cisco Switching/Routing :: N7K-M148GT-11 VPC Keep Alive Link

Feb 27, 2011

can assist me with some vPC design best practice. I'm trying to get my head wrapped around and build some engineering/configs together before my equipment arrives. I have two nexus 7010 boxes arriving soon.I will go ahead and configure the peer link using two 10g ports between the 7k's. Now how do I go ahead and configure the keepalive link.
 
1. use a copper dedicated single link using the mgmt ports on the supervisor for the keepalive?

2. use a copper port from 10/100/1000 line card (N7K-M148GT-11) for the keepalive? 
 
Also this network will have a dedicated mgmt switch for all the devices to be managed. If I go ahead with number one (above), how will I use that port to manage that device?

View 14 Replies View Related

Installed Avast - Unable To Connect To Internet

Jun 25, 2012

I had some issues so installed Avast, ran a scan and everything went wrong from there, suddenly dropped internet, tried system restores which failed and automatically deleted the restore points. One of the main fixes (that i havnt managed to get to work) is ipconfig /release/renew, both come up with "an error occurred while releasing interface loopback pseudo-interface : the system cannot find the file specified file" and "an error occurred while renewing interface local area connection : an address has not yet been associated with the network endpoint"?

View 3 Replies View Related

Linksys Router With Verizon Westell 6100 Modem?

Oct 18, 2011

Okay, I know there has to be something I'm doing wrong because 3 months ago I set up the same modem & router to work. Being the idiot I am, I reset my router to change the password (dumb I know) and now the router can't pass the internet signal from the modem on! 1. I've set the modem to bride/bridge and unchecked the private LAN box.release/renewed IP2. Used the modem's MAC address in the router. . Made sure DHCP set to obtain automatically.4. Reset, restarted seperately multiple times.It looks like from the status page that the router is obtaining an IP but it won't connect to the internet

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved