I have a ethiernet cable that I can connect to my pc and get internet, when I connect that same cable to the wirless router, I can't get internet, what am I doing wrong.The PC I am using connect to other wireless routers on the same network, but this ethiernet cable only work on pc when put in direct
View 4 RepliesI have DSL setup in my house and I want to know if using a cable modem will work and increase my speed. And will it work with a linksys router
View 1 Replies View Relatedhow to manage internet lan cable and usb modem to work together?usb for mail and browsing ane lan for downloading i used win7,laptop
View 6 Replies View RelatedI've been having this DNS problem for 6 days or so. The internet doesn't work with cable nor Wi-Fi and I've tried almost everything, ping, configuring the DNS, IP, disabling everything, enabling everything, nslookup doesn't work, releasing and renewing doesn't work too, and to make things worst.(In the main computer, everything works just fine and the router settings appear to be correct too, my computer also works perfectly fine in other places with WLAN).
View 14 Replies View RelatedI just bought a DIR-835 Router. the wireless works good-the problem however is the PC I have hooked up to the cable box, now the internet works only occasionally. I have tried disabling the firewall ,etc. The only time I can get the internet on the cable box connected PC to work is when I reset the router. I have a Gateway PC with Windows XP, I use Google Chrome. I assume it must be a Router setting that needs correcting. My previous D-Link router worked fine with the cable connected PC.
View 5 Replies View RelatedI have a cable that is not working on the router end or the computer end. Could I have the wrong cable? The writing on the package is: Category 5E patch cable 350 MHz UTP Standed 24AWG PVC jacket, molded boot. 50U" plugs complies with FCC part 68Cat5e patch cable, RJ45-RJ4524 AWG stranded, 568B
View 2 Replies View RelatedI have a Dell Precision 340 and I went to connect my modem and wireless router to the PC via my ethernet cable. When I hook it up, my computer says new hardware ethernet controller and wants me to add it. When I try to add it, it will not let me and wants me to add the hardware via a disk or CD rom, which I don't have. Because I can't get the ethernet cable to work on the PC I can't get internet, however the wireless router still works......
View 6 Replies View RelatedI just purchased a Belkin prepmium CAT5e networking cable and plugged it into an internet wall jack and hooked it up to my ps3 and the connection won't work. Does it have to be hooked up to a router? Is a CAT5e cable the same as ethernet? or will I need to buy a different cable?
View 3 Replies View RelatedI configured my router Linksys WAG120N as DMZ, but not forward port 80, only port 80.
View 1 Replies View RelatedWhen I use only wireless B everything works fine. if I try to use both N and B none of them work and no device manages to connect wirellsly. Is there any special setting? I try to use standard Wep security because I have some older devices that don't support WPA.
View 3 Replies View RelatedI have a new X2000 v2 firmware 2.0.04. When I use it- itunes on my PC with seven don't work and give me error 8003.- the Apple Store on my iPad and on my iPhone don't download or upgrade the application.- itunes on my macbook air with mountain lions don't work and give me error 8003.- the download in ftp are very slowIf I use my old AG2241V2 all work fine.I have replicated the configution of old router on the new as far as possible but don't work.
View 3 Replies View Relatedwhat is the maximum length a cat7 cable can work for a backbone
View 2 Replies View RelatedI have been using my laptop since a year now and yesterday suddenly my internet stopped working. On top of the connectivity bar a yellow sign appeared. Now my internet status is "No internet access" but when i connect my ethernet cable the internet starts working and i can see the "Internet access" status. I have re-installed my wi-fi driver too from the orignal CD that i got with my laptop, but still no luck also i did not install anything in past 1 week and the only anti-virus i have is Avast (tried disabling it too). I plugged out the cables from my router and plugged them again but that dint work too. There are 2 other laptops (running on windows 7 just like mine) on which the wifi connection is working but on mine it is not working.
View 9 Replies View RelatedI recently purchased a WAG320N router and have issues with access restrictions. Internet is shut down regardless of the time set with the policy or policies. I am using firmware version V1.00.12. Tried rebooting router, restoring factory defaults & restarting IMAC to no avail. Timezone checked and OK.
View 5 Replies View RelatedHere my network.dsl provider-->d-link modem (dhcp server, 192.168.1.1)-->X2000 (dhcp replay, 192.168.2.1(LAN IP))--> My laptop - X2000 config: dhcp replay: 192.168.1.1, LAN1 from d-link to WAN x2000 (blue rj45), X2000 have ip address from d-link. but my laptop can not receive ip address. X2000 is not gateway modem because it stuck after 1 day work. Can access to Web config page and internet.
View 4 Replies View RelatedI have noticed that on my WAG120N the WPS function doesn't work as it should (...at all). I tried connecting a blackberry, a playstation3 and 2 different laptops using the WPS option (button or PIN, doesn't matter) and the devices would simply not talk to each other. I can understand problems with the PS3 but the blackberry and the laptops were (and still are) able to connect using WPS on my previous router - WAG54G2. Pairing of the devices by supplying a password works fine, this is a problem only with the WPS functionality. My firmware is V1.00.16.
View 7 Replies View RelatedI have an ADSL Modem WAG200G Annex A, with latest firmware. I recently purchased a Linksys E2000 to upgrade my wireless to N, plus to get 4 gigabit Ethernet Ports for my NAS.
The problem is, I set WAG200G to "Bridge mode only", and from within E2000, I provided PPPoE credentials (user name and password), it does not work, no Internet connection!
Normally, with the WAG200G, PPPoE credential is set as followings (and it works)
Type: PPPoE Multiplexing: LLC Virtual Circuit: "0" for VPI (0~255) and "33" for VCI (0~65535) "Keep Alive" option
on E2000 Router, PPPoE does not have the above option for me to select. Only User Name and Password field
I wonder if Cisco 1000BASE-T SFP can work with CAT-6 cable. I believe it can. But in the Cisco datasheet, it only mentions that “The 1000BASE-T SFP operates on standard Category 5 unshielded twisted pair copper cabling of up to 100m (328 ft) link length”.
View 3 Replies View RelatedI have been using a Linksys Wireless-G ADSL WAG200G, Annex-A Gateway Router and it has been fine, now my ISP have told me that they are modernising the network and will need a router capable of managing ADSL2/ VDSL connections, so will my router be able to do that or will I have to buy a new one? It has firmware 1.01.09?Edit: I see in the DSL Modulation menu which is set at present to "Multimode" I also have options to select ADSL2, ADSL2+, ADSL2 AnnexM, ADSL2+ AnnexM and ASDL2 AnnexL but I do not see any mention of "VDSL"
View 2 Replies View RelatedHow does the storage work with a WAG320N device via USB if I am using a Ubuntu 10.04/10.10 et al?
Does it look like an FTP site or can I just use it as a shared folder accessible though the normal folder directory structure from any machine on the network.
I try connecting via ethernet cable and it doesn't seem to work until the administrator of the network (my brother) comes home and then turns his computer on and starts using it. However, if i switch to a wireless adapter it sometimes works (like right now) even when my brother is not using the internet. Also, i tried to connect via wifi on my macbook pro to the same server and it used to work flawlessly 100% of the time, now i can only connect once in a while for short periods of times.
View 1 Replies View RelatedI have a Belkin usb adapter to pick up my wireless internet. problem is when i choose my network to connect to it constantly says "acquring network address". But as soon as i plug in an ethernet cable from the router the wireless starts working and i just unplug the ethernet cble. So why does my wireelss card depend on my ethernet conenction?
View 7 Replies View RelatedThis will work, the Netgear I have does this seamlessly, how do I set this up as I cant find any info in the manuals/online help.
View 1 Replies View RelatedI purchased Linksys WAG160N (from a store) and I also have 7 Linksys SPA962 VOIP phones provided by MyNetPhone with service included. All tests we found out that this modem doesn't work with this VOIP phones. Somehow probably doesn't give access to MyNetPhone servers to get connection with this phones.I purchased an other one from DLINK and works perfect?
View 1 Replies View RelatedI found that if the WAG320N remain "on" during the night the day after will no longer work. It need to stay "off" for one day and than is starting to work again till another working's night! Why?
View 1 Replies View RelatedIm having a issue with that any of my computers without a wireless connection have been incapable of getting out on the internet with the new router that i got myself, i know the cables works etc, since they work perfectly fine with the old modem alone, but wont work at all with this unless on a computer with wireless connection
View 5 Replies View RelatedI'm trying to configure my WAG200G to work in bridge mode so that it can transfer my external IP address to my ISA server.My network map is very simple,Internet -- WAG200G -- ISA Server -- LANCan
View 7 Replies View RelatedI have a similar thread about this issue, the issue of this modem not support any kind of port forwarding actions... even disabling firewalls, using DMZ, port range forwarding the whole ip range , solves a thing...
it has upnp and port ranging features all over it but somehow it does not do it, and nobody cares excepty the ones that invested in it...
so if you are stuck with a router like me, dont bother wasting hours on it, and leave it to the people who are responsible for it.
I recently purchased a WAG320N, primarily for the faster networking speeds and the ability to attach a USB hard drive to my network.The only problem is that I have little idea how I get this network storage thing to work. Cisco haven't really supplied any documentation on how to work this.So far I've plugged in a hard drive and formatted it through the router's web interface, with no trouble at all.But, after doing this I have no idea how to access my hard drive on the network.I would assume that it would appear automatically on my network for me to access freely.
View 9 Replies View RelatedI have been playing with multicasting on my home network and have hit a problem in that all multicast messages seem to be spewing out over the WIFI regardless of whether there any any subscribers present or not which is swamping all other WIFI traffic. The wired LAN seems to be behaving just fine (no traffic on the wired network if no subscribers present).
how do I filter the multicast messages so that they are not sent out over the WIFI (unless a WIFI subscriber is present)? I have tried enabling the IGMP proxy but it makes no difference. I've tried messing with lots of other parameters too but no joy. Does multicast filtering actually work (or exist) on the WAG320N?
I am looking to upgrade my dumb switches to a Cisco 2960 switch. I wanted to check and make sure that this configuration would be supported. I will need to setup 4 vlans on the Cisco 2960 switch, 1 for vmotion traffic, that would not have internet access, one for management traffic that would not have internet access, one for standard server traffic and one for vmserver traffic, those would both need internet access. Would the Cisco switch work with the SMCD3G-CCR gateway ok, or would I need another router in order to do this?
View 1 Replies View RelatedI took my samsung RV510 back to factroy setting and now have no wireless only works on ethernet cable
View 2 Replies View RelatedIs there any way I can make the cisco 857 router work on ADSL over ISDN?
View 2 Replies View Related