D-Link DIR-825 :: Internet Does Not Work On Computer Hooked Up To Cable
Aug 20, 2012
I just bought a DIR-835 Router. the wireless works good-the problem however is the PC I have hooked up to the cable box, now the internet works only occasionally. I have tried disabling the firewall ,etc. The only time I can get the internet on the cable box connected PC to work is when I reset the router. I have a Gateway PC with Windows XP, I use Google Chrome. I assume it must be a Router setting that needs correcting. My previous D-Link router worked fine with the cable connected PC.
View 5 Replies
ADVERTISEMENT
Mar 28, 2011
My cable tv was working great until we just hooked up the wireless internet & it went out,well basically out,its all fuzzy now w barely a picture & no sound,All the wires inside & out seem to be tight & secure,i was trying to figure this out before calling the cable company,i just cant figure it out.
View 9 Replies
View Related
Mar 15, 2011
My second computer was enabled to be brought up on my PC, but after I took it back to factory settings I lost it .Can you tell me how to get it back on my PC?
View 6 Replies
View Related
Dec 16, 2011
I can't get my Brother MFC-J410w hooked up to my Dell Computer. I am running Windows 7. I ourchased this printer 8/2/2011 and have yet to print.
View 2 Replies
View Related
Mar 6, 2012
My printer is hooked up wireless. Can i connect my usb cable to my printer and my computer?
View 1 Replies
View Related
May 31, 2011
So i have 2 laptops and various phones and iPods hooked up to my network via the wireless and have 3 computers, 2 PS3s, 2 XBox 360s hooked up via LAN cable (These are not always running all at the same time). From time to time (it varies on time of day) the internet disconnects from all the computers in the house but the LAN stays connected. It will sometimes come back online if you wait anywhere from 30 seconds to half an hour at times. Manually restarting the modem by unplugging it for a while and plugging it back in sometimes works, at other times it does not. We replaced the switch and the router so far trying to eliminate them as the problem to no avail. We have not replaced the modem yet. My ipconfig info is below:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersMike>ipconfig /all
[Code].....
View 5 Replies
View Related
May 7, 2012
Some background on a scale of 1-to-10 with 10 being Sheldon Cooper and 1 being a computer less grandparent, I'm about a 6. I'm home from school for the summer and trying to access my parent's DSL by adding my router as a middleman. I tried the basic hookup (wall->modem-->router-->computer) using a Motorola MSTATEA modem and a Cisco E1000 linksys router
View 16 Replies
View Related
Apr 22, 2012
For home use, I have a Windows Vista PC which is hooked up to the Internet via a wireless EV/DO modem that plugs into a USB port. I just bought an iPad and for connectivity, I then bought a WRT120N wireless router. But I cannot attach the EV/DO modem to the WRT120N since the EV/DO only has a USB port. I plugged the PC into one of the 4 ports of the WRT120N and the iPad sees the router, but what I would like is that it also sees the internet when the PC is online via the EV/DO modem. Is there a way to configure this? I realize that the PC would always have to be switched on if I want to have the iPad online, but for the time being I am ok with that.
View 1 Replies
View Related
Nov 4, 2012
I have Vista Home premium 32 bit. My connection from the internet has been a frustrating problem. I have to turn my computer off and on several times before my wireless works. It I do a restart on my computer my internet does not work, so I have to totally shut it down and wait then restart and even then it my not work. I always run the repair to repair wireless connection and even that does not work.
View 3 Replies
View Related
Jul 12, 2011
I have a ethiernet cable that I can connect to my pc and get internet, when I connect that same cable to the wirless router, I can't get internet, what am I doing wrong.The PC I am using connect to other wireless routers on the same network, but this ethiernet cable only work on pc when put in direct
View 4 Replies
View Related
Mar 30, 2013
I recently was given an old computer from work. I tried to connect it to the internet at home but it wouldn't connect. The icon at the bottom shows that it is connected but the web browser shows that i'm not connected. All the computers at work are connected to a network so there may be some settings that won't allow it to connect at home. I did go on to internet options under connections and changed the default connection from the work network to broadband but still no luck. None of the proxy boxes were checked either. The OS on this computer is Windows XP. Also, all connections to my home internet are fine.
View 2 Replies
View Related
Feb 2, 2011
I have DSL setup in my house and I want to know if using a cable modem will work and increase my speed. And will it work with a linksys router
View 1 Replies
View Related
Oct 19, 2011
how to manage internet lan cable and usb modem to work together?usb for mail and browsing ane lan for downloading i used win7,laptop
View 6 Replies
View Related
Jul 26, 2011
I've been having this DNS problem for 6 days or so. The internet doesn't work with cable nor Wi-Fi and I've tried almost everything, ping, configuring the DNS, IP, disabling everything, enabling everything, nslookup doesn't work, releasing and renewing doesn't work too, and to make things worst.(In the main computer, everything works just fine and the router settings appear to be correct too, my computer also works perfectly fine in other places with WLAN).
View 14 Replies
View Related
Jun 15, 2011
I was recently given a computer from my workplace. I took this computer home, and put it in the place of my old one. The internet connection on my old computer has always been fine; all cables are connected correctly. However, this computer from work will not connect to the internet. The icon in the bottom right corner of the screen states that I am connected, but the internet browser claims that it is unable to display web pages. May the cause of this be related to any unique computer settings that a workplace may have on a computer in their network? Other computers have no problem connecting to the internet through the same, wired connection. The OS is Windows XP Professional.
View 2 Replies
View Related
Apr 14, 2013
Yesterday I was on my cousin's computer, and we had to remove the ethernet cord to connect it to mine as my wireless adapter wasn't cooperating with his internet. This was all fine and dandy until we had to plug the ethernet cord back into his computer. It locks everything up. If you try to open a program, it won't open. If a program is already open when the cord is plugged in, it stops responding within 15 seconds.I called my brother, and he suggested I run a virus scan via Microsoft Security Essentials and MalwareBytes, which I did. MalwareBytes found 5 problems, MSE found 1 additional one. They have all been removed, however this problem still persists. If you try to start the computer with the ethernet cord plugged in, it will allow him to put in his password, it will say welcome for about 3-5 minutes, then the screen will go black. The mouse is visible, doing it's motion to indicate that it's loading something, but it never achieves anything.
View 1 Replies
View Related
Jul 18, 2011
I cannot connect to the internet via my router. The router is functioning properly two other computers in the house use the router one though Ethernet cable and the other one connects wireless. Things I have done while trying to figure out the problemMade sure all windows updates were up to date Scanned for viruses and malware (none were found) Uninstall the network adapter Made sure the network adapter driver were up to date
I have noticed that when I plug the Ethernet cable from the router to the computer the led on the back of the computer panel does not blink as it does when I route directly from he cable modem.
View 3 Replies
View Related
Oct 8, 2008
I just got a WAG160N-au, I run the installation disk, follow the procedures. I got the internet connection.
View 9 Replies
View Related
Dec 11, 2011
I just got my DIR 825. It had 2.02NA Firmware in it. It had a few options that I wanted to use but didn't work. So I thought I would update firmware. I follow the instruction from dlink to install firmware. So I loaded 2.03 and noticed internet connection not working. So then I loaded 2.05 part1 and part2. Still could get internet connection to work but the reason to upgrade the option I wanted worked. So then I loaded 2.06 and still same result. No internet connection. So then I loaded the original firmware back in and internet connection works. Why doesn't the internet work on the other firmware updates. I got the updates from dlink website. I would like to update firmware
View 9 Replies
View Related
Nov 10, 2011
I have this D-Link DIR-825 and it was working fine till yesterday. All of a sudden it stopped connecting to internet. I restarted it and tried to login to the router but failed. I called the support and did a hard reset of the router. After that when I am not able to connect to the router from my computer for configuring it again. When I connected the Router to my computer via LAN cable sometimes the LAN port is glowing and sometimes it is not. I tried different LAN Cables too. But nothing is working and I am not able to get to the router page.
View 5 Replies
View Related
Feb 24, 2012
First I tried restricting all computers from accessing the internet from 11:00PM to 6:00 through access control. I enabled it and set up the schedule but it does not cut off the internet. I went through create a new schedule and did that but again it still connects. Then, in access control, I selected always and put in my son's IP address and created a schedule for him but it won't allow him any internet access.
View 2 Replies
View Related
Jul 13, 2011
I have tried everything I can think of but since purchasing my 615-N router from DLink, I haven't been able to get online via wireless internet from another computer in this apartment. The router seems to be working fine - I have a LAN connection through it to this computer I'm on now and the PS3 hooked up to the wireless signal just fine. It is the one desktop computer though. The only thing I can think of is that I am using an old g adapter. I didn't think this would matter because the N router can supposedly communicate with g and b devices.
View 3 Replies
View Related
Feb 1, 2013
I have got a TP link wireless router connected by TP link power line ethernet adapters connected to my sky box, one to Samsung Smart TV, which both work fine the third I have connected to my computer. This shows up as as a local area connection but with no internet access. I have similar problems to other people with internet access dropping out after installing Windows * and had hoped an ethernet connection would be more stable. Any thoughts on why I can't connect to the internet via my powerline adapter.
View 5 Replies
View Related
Nov 13, 2011
I migrated my internet from PPPOE to DHCP. My wifi is working with no problem but when I hook up my computer to 1 of the 4 Lan ports I can't seem to connect to the internet I can however log in my router no problem. But I don't get internet access... I wonder what could be the problem. I tried resetting my router and modem to see if just a bug or something but to no avail.
View 5 Replies
View Related
Apr 23, 2011
I want to connect to the internet with a wireless connection on a new computer. When I connect I am asked the security code that I do not know where to look.
View 1 Replies
View Related
May 22, 2012
Looking at getting an older second computer onto the internet. We have a wireless connection on the primary computer so I was looking at the TP-Link TL-WN321G USB network adapter, or the TP-LINK WN350GD PCI network adapter.The end goal of course is to get the old computer onto wireless, but not sure what the best way to do it is. I'd think the motherboard would accept the PCI card though we do somewhat lack USB facilities. The computer uses a USB hub which I'm not sure if it would impact on internet speeds at all.
View 3 Replies
View Related
Feb 15, 2012
I just switched to Cogeco Highspeed ( cable ) and bought a xtreme N gigabit router and it always seems to drop the connection every few hours. The router is set with dynamic IP , I've turned off short GI , it is broadcasting 802.11 N , I've tried changing the channels (currently on ch ,I have 2 wireless phones in the house but they are 20 or more feet from the router it self and also turned off always broadcast DHCP.
View 1 Replies
View Related
Nov 8, 2011
I purchased this router and a Motorola Surfboard SB5101U for my home network. My current set up at home for devices connected to router are as follows:
2 Macs and 2 iphones - Wireless
2 Directv boxes, 2 blu-ray players and xbox360, Ethernet cabling.
The issue I am having is that everyday at-least 7-8+ times my internet will just stop coming through. I never lose connection to the router it's self. But I cannot load webpages/content on any of my devices. They always show as being connected fine to the router though. I have attempted to call Cox cable, my ISP, to resolve the issue. And I am always told that everything looks fine on their end and that the issue must lie with the connection between the Modem and router. The rep then walks me through a complete reboot of both router & modem and of course, the issue is resolved 100% of the time. I am trying to fix the issue my self to avoid a $50 service call fee from Cox which could still not fix any issues at all. Since I have done some searching and found some advice on making changes to the configuration of the router. But time after time I continue to get the same issue.
View 14 Replies
View Related
May 14, 2013
Region : UnitedStates
Model : TL-WR841N
Hardware Version : V8
ISP : ATT
I get this new router TL-WR841N from amazon.com, I get no signal/internet connection on my computer when I install/connect the router using the installation min CD (same procedure at listed here: url...The DSL connection is good, since I get internet connection when I connect my modem directly (without the router) to my computer. My modem is the old Siemens SpeedStream 4100 with IP Address of 192.168.0.1 from ATT.Is my router deficit ?
View 2 Replies
View Related
Apr 16, 2013
Region : UnitedKingdom
Model : TL-WR740N
Hardware Version : Not Clear
Firmware Version :
ISP : I am trying to set up my router for about 2 days without any effect.
Here you can find, what I have to do to connect through Ethernet cable to the internet at our university:[url]....
When I set auto-detect IP on router, it says that I have Static IP. In CMD I can find out all the information about the connection and the licence is usually for one day (automatically renewing). I've also tried to clone MAC address, nothing happened.
View 1 Replies
View Related
Feb 16, 2011
i have an asus laptop that had a rogue virus...i brought it back to zero to the manufacturers settings...now i cant use wireless i lose connection when i take the cord out of the (phone jack looking like thingy) to my router (netgear) how do i use the wireless or find a connection?
View 1 Replies
View Related
Mar 1, 2012
I received a new modem with wifi and I'm still not receiving wifi even though I've hooked it up. I think that it's not hooked up properly.
View 1 Replies
View Related
Jan 23, 2013
Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225
ISP : Rogers
Ever since upgrading my firmware from 120426 to the latest(121225), one of my computer(windows xp, TP-link Nano) is frequently losing internet connectivity.I purchased the router a month ago and firmware 120426 was the version that came installed. The router would stop working about 3-4 times a week, requiring me to reboot it. Because of this I did some research online and found out about version 121225 which supposedly should improve performance and stability. After the firmware upgrade today I noticed that one of my computer is having a lot of trouble maintaining internet connectivity for more than 30 minutes. When checking wireless connectivity it would say that I am connected and that the signal strength is excellent. I'm also able to ping 8.8.8.8 but not www.google.com(I've tried ipconfig /flushdns and it doesn't solve the problem). I also have trouble accessing or pinging the router(192.168.0.1) with this computer.
View 3 Replies
View Related
