My laptop charger broke so I havent been on in a while and I finally got a charger and it wont connect. I tried connecting wireless and wired and neither worked. Tried resetting my modem and router a bunch of times... iPhone cAn connect fine to my router
View 3 RepliesHow do i make my laptop wireless without having to have my laptop connect to all the wires?
View 9 Replies View Relatedat the bottom of my lap top is my wireless card that two wires connect to but my lap top didnt have them so i had to go out and buy them but dont know how to connect wires to my lap top?
View 1 Replies View RelatedWe have 2 LANs to 5 PCS in different office buildings and need to connect them using optic fibre.
View 9 Replies View RelatedWhenever it comes time to terminate Cat6 lines into an RJ-45 connector, there is an expected way of lining up the colors in each end. This differs somewhat between Cat5 and Cat6 but the principle remains the same: there is a standard order in which to feed the wires into the connector.
My question is, why is this order used? Is there a specific reason why it is done this way? The way I see it, since all 8 wires inside the cable are the same, it shouldn't matter which order you use, as long as it is the same on both ends...
Toshiba laptop will not connect to wireless router. Toshiba laptop was working on wireless network yesterday.New modem/router installed today. Laptop will not connect.It finds the network but will not connect, stating time out has occurred.All other computers in house are connecting to network with no problem. Running Windows Vista. Have rebooted modem, rebooted computer.Even plugged computer in directly to modem and it connects fine but will not connect wirelessly.
View 1 Replies View RelatedIm having trouble connecting to a wireless router. It shows up as an in range router but when I try and connect after entering my wpa password it just acts like it's going to connect but then never does. Doesn't even attempt to aquire an ip. I attached my computer directly to the netgear router and that worked fine but still no wireless!! My computer is a dell running windows xp service pack 3
View 3 Replies View RelatedAfter finally getting my wireless and wired routers to play nice together, I now find that my laptop won't connect. I know the wireless router is working fine, because my hp touchpad connects no problem.Lap is a dell inspiron m5030 with windows7 x64 on it.It's brand new, but I removed the dell stuff and installed win7 ultimate, as I already owned it. (and I have a thing about stuff that comes bundled...don't like...but it came that way.)I have all the drivers installed but I can't seem to even see my router.
View 14 Replies View RelatedI just move to a new place and find out only me can't connect to the wireless router.This laptop can connect to other wireless routers but not this one.My other laptop and cellpone can connect to the router successfully(so I'm sure the code is right, and the router dosen't set any MAC filter).I've tried to reinstall the driver of my wireless card, and still not work.
View 1 Replies View Relatedhow can I connect my laptop to anyone's wireless router to use their internet.
View 1 Replies View RelatedMy laptop wont connect to the internet, it dosent even show my provider to connect with, however it works fine when connected by eternet cable to my router..
View 2 Replies View RelatedMy LAN PC is connected with the router through wire. My laptop is wireless which is connected to the modem. I want to acces the file from the wired PC to wireless Laptop. Both are connected with router.My PC ip is 192. 168.1.205My laptop ip is 192.168.1. 204My router static ip is 192.168.1.136How to connect the LAN Pc from wireless LAptop through Modem.
View 3 Replies View RelatedHow can I connect my laptop to my main pc?
View 1 Replies View RelatedI have an eMachine with Windows XP and I cannot get it to connect to my Linksys router. It worked perfectly fine until I got a new computer. I know it isn't the router because my mother's laptop can connect to it and so can our really old Apple computer. I have tried many different things but nothing has worked.
View 14 Replies View RelatedJust bought a new laptop for my mother - a Packard Bell Easynote TS with Windows 7. Attempted to connect it to our home's existing router, but have run into problems.We have two other computers in the house, both linked via ethernet to the router (a Netgear DG834Gv5) although one sometimes goes wireless with no problem whatsoever. I have been on various forums to find ways of solving this issue; I have turned off the router and laptop and rebooted both; I have checked at the router IP address to see if the SSID name is broadcasting, it is; I have added the correct MAC address to the access list as we are on WPA2-PSK (wifi protected access 2 with pre-shared key); I have tried disabling this security option in the hope it allows a connection but no; I have even tried copying the existing network configuration from the laptop than can connect wirelessly and via USB stick pasted across to the new laptop, this also failed to work. I have also been into the Device Manager to check the network adapter (ATHEROS AR5B97) is working properly and it has the latest drivers installed - it has. There is no yellow warning symbol on it. When I run a diagnostic check it results in: "Investigate router or access point issues."
Booting up the laptop reveals that there are wireless network connections available - the home one. It has a good-to-excellent signal strength, radio type = 802.11g, the SSID is showing. But when I click on 'connect', it brings up: "WINDOWS WAS UNABLE TO CONNECT TO [our SSID]"When I connect this new laptop using the ethernet cable that I sometimes run my existing laptop with, it connects to the internet with no problem at all, so it is definitely just a wireless issue.The only thing that I am aware I haven't tried is to uninstall the pre-installed 60-day trial of Norton which some suggest may block the signal (is that right?) but I have temporarily disabled it and that did nothing.
I have a Netgear wireless router(WGR614 v9) and im trying to connect a second laptop to it. The laptop is accessing the internet when I have it connected to my modem via Cat 5 Patch cable.When I detach the cable from the laptop and modem, it doesn't connect to the internet. I went through the whole installing with the cd that comes with the router but after I finish I get the same results.
According to System properties:
Microsoft Windows XP (theres a sticker on my laptop for Windows Vista)
Home Edition
Version 2002
Service Pack 3
Posted below is my computer info from using ipconfig.
Windows IP Configuration
Host Name . . . . . . . . . . . . : ******
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
I started off with my dl speed around 2 years ago at about 210kbs. Not the best but because i live in a rural area i was happy enough. But now my connection has dropped massivly to 40kbs being the peak. The internet was faster in the stone ages -_-. Anyway, i want to figure out if its the wires in the area being faulty or as someone told me it might be my wireless router (Netgear). I'm trying to plug my laptop directly into the internet without the use of wireless to find out if it is the router being the problem. The only cable i could find an ethernet to ethernet cable. I've tried plugging into router and a bit that said modem and tried to set up a connection. It didnt work so connect my laptop to the internet without the wireless router.
View 14 Replies View RelatedI recently had Verizon high speed internet installed in my house. I connected a laptop to the router with an ethernet cable and everything works fine. I managed to connect with another laptop and another computer via wifi and they also work fine. I now want to disconnect the ethernet cable and allow the original laptop to be mobile around the house. When I first tried this everything worked fine. When I tried again (with the ethernet cable still connected) the wireless internet connection was recognized but would not allow me to connect. The message was something to the effect of "Windows is unable to connect to the selected network. The network may no longer be in range. refresh the list of available networks, and try to connect again." The network is certainly there and the router is right next to the laptop - fully in range. The same thing happens when I disconnect he ethernet cable. A few times the router didn't even show up in the list of wireless interner connections. I might have changed some setting someplace but I don't know which one.
View 7 Replies View RelatedI recently had Verizon high speed internet installed in my house. I connected a laptop to the router with an ethernet cable and everything works fine. I managed to connect with another laptop and another computer via wifi and they also work fine. I now want to disconnect the ethernet cable and allow the original laptop to be mobile around the house. When I first tried this everything worked fine. When I tried again (with the Ethernet cable still connected) the wireless internet connection was recognized but would not allow me to connect. The message was something to the effect of "Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of available networks, and try to connect again." The network is certainly there and the router is right next to the laptop - fully in range. The same thing happens when I disconnect he ethernet cable. A few times the router didn't even show up in the list of wireless interner connections. I might have changed some setting someplace but I don't know which one.
View 13 Replies View RelatedOkay I know absolutely nothing about computers and my laptop won't connect to my wireless router. I keep scanning it and it says that there aren't any connections available, but my router is working and both my other laptop and my desktop are connected.
View 3 Replies View RelatedI changed my netgear wireless router password and now my laptop will not connect to the router or to the internet. It has no popup to put the new password. I have no problem logging on with my phone...just the laptop.
View 1 Replies View RelatedI recently upgraded my DSL service, which required installing a new VDSL modem/wireless router (Actiontec c1000a.) Before the upgrade, I was using an older standalone DSL modem with a Netgear router to provide wireless access to my gaming consoles, laptop, etc. Everything works as before with my new wireless router EXCEPT my son's laptop. All my consoles, iPods, and desktop CAN connect to the wireless network, and the laptop will connect over a WIRED ethernet connection. I cannot get it to connect to the wifi.
[code]....
I can not get my new hp pavilion g series laptop to connect to the wireless router that I currently have. What do I need to do?
View 1 Replies View RelatedI have had my laptop for over a year and it usually connects fine but two days ago I turned it on and it simply won't pick up on the signal coming from my router. I have a computer and another laptop connected to this same router and they are both working fine. It just says that there are no connections available even though the router is on and showing up on the other two machines. The router is a Belkin and the laptop a Dell, Windows 7.
View 7 Replies View RelatedI have to reconfigure the wifi connection everytime a new laptop comes into my house -- and we can only use one computer at a time with this router...huge problem with a big family..
View 1 Replies View RelatedJust installed linksys wrt320n. Desktop and one laptop (wireless) connect. Both windows 7. A second laptop (Vista) errors out with message "the selected data rate is not correct". This laptop sees the router (since I see the router name and it validates the passphrase) but I cannot ping the router. I saw two messages on this site suggesting to enable WMM and use security WPA2. I have verified that both of these are so set.
View 9 Replies View RelatedI am trying to manually setup a WRT120N router. I am using my laptop (hard wired) for the initial setup. Okay, everything is working fine until I unplug the ethernet cable and try to go wireless. Will not connect to my network. I am also having this problem with all my other devices.
I had everything running fine on a WRT54G, I just wanted to try out the WRT102N. I did change the SSID name form what I was using on the WRT54G.
I install the E2500 router with my modem. it works fine with other compaq desktop and gateway laptop. But the HP Pavilion dv6910 can not get online. I try my hp laptop at starbuck shop, and it work fine.
View 3 Replies View RelatedI have a WRT110 wireless router. My problem is that my laptop has issues connecting to my router. It sees it and shows that there is a strong signal but sometime it will connect other times not. My laptop has no problem connecting to other wirelss routers. And my other devices have no problem connecting to our router. I've reset the router several times and changed the router to no password or security of any sorts. How can I get my Laptop to connect to my router?? I feel like it is a setting issue between the Router and the laptop. Is there a way I can erase the history of the router from the laptop and start fresh?? Like I've said I have reset the router several times. Does it have to do with my firewall?? It's just frustrating that my laptop can connect to anything but this Router. And my other devices like our blue-ray and Wii can connect to the router without problems so why can't my laptop and router connect to each other?
View 7 Replies View RelatedI have a WRT54GS router. Desktop works fine and the laptop wireless connection worked fine until recently. Now I cannot connect to the router with the laptop. At times I can get to the access point, but can't get to the internet. But for the most part I cannot connect to the router at all.
View 4 Replies View RelatedI have a WRT110 router connected to my desktop computer. The router works great for the desktop and one laptop, but if I try to connect a second laptop it disconnects the first one.
View 2 Replies View RelatedI can connect via a ethernet cable but can't connect via a "Ralink RT5390 802.11 b/g/n WiFi Adapter" on a HP Pavilion G6 Windows 7 OS. It finds the connection (with a strong signal) and asks for my network key but then says "Windows was unable to connect to network"
View 1 Replies View RelatedI cant get my laptop to connect to my wrt160n v3 router when wireless N is enabled my laptop supports b/g/n wireless.
View 5 Replies View Related