Limited Access Over Ethernet After Bootup?
Dec 24, 2011
I'm running on windows 7 professional with a realtek gigabit ethernet port. It's a gateway SX2370. It originally came with home premium and a bunch of bloatware so I restored with pro. I thought I installed all the drivers but a few minutes after bootup, the ethernet breaks. It works for a few minutes, as I can access the internet, and then itt gives me the no internet access error. I used a usb wireless card and that works after bootup, but doesn't run as nearly as fast as my gigabit ethernet.
View 5 Replies
ADVERTISEMENT
Oct 21, 2011
Network Adapter (as displayed in device manager) Realtek PCIe GBE Family Controller (says this device is working properly)
Motherboard chipset
Intel p67
Processor
i5 2500k
Windows 7 x64
I'm running my lan on the integrated network adapter "Realtek PCIe GBE Family Controller" on my motherboard. When I plug in the lan line directly from my router the speed on speedtest.net is around 2 Mbps, i have tested on 2 other computers and they all get around 10 Mbps with the same line. I build this new machine to play games, and sank $800+ on it. I am trying very hard to figure out why my LAN speed is so slow.
I am worried it is a mother board defect, but it is unlikely as I can still browse the internet and stream video. I just get slower download speeds and more lag in games which defeats the purpose of building a gaming computer . I have disabled my avast and my windows firewall to test the speed.
I have also tried buying a wireless card (Netgear N300 Wireless PCI Adapter) and it peaks at around the same 2Mbps. My other computers get 6+ Mbps wireless on speedtest.net at the same location from the router.
Because both LAN and wireless seems to be caping out at 2Mbps could this be an indicator of some sort of internal limiter on internet speed? Or even worse, hardware defect? I'm going to get a USB wireless adapter tomorrow and test the speed.
View 3 Replies
View Related
Oct 20, 2011
Network Adapter (as displayed in device manager) Realtek PCIe GBE Family Controller (says this device is working properly)I'm running my lan on the integrated network adapter "Realtek PCIe GBE Family Controller" on my motherboard. When I plug in the lan line directly from my router the speed on speedtest.net is around 2 Mbps, i have tested on 2 other computers and they all get around 10 Mbps with the same line. I build this new machine to play games, and sank $800+ on it. I am trying very hard to figure out why my LAN speed is so slow,
View 1 Replies
View Related
Mar 10, 2011
what is a diskless station in networking
View 1 Replies
View Related
Apr 25, 2011
I have a concern about my system. I am running Win XP Pro on my computer and when it boots up and I log in, it takes about two minutes with the internet first, AVG following and windows firewall last amongst other apps.Is there a way that I can increase my loading speeds plus changing the bootup sequence so I don't run high risk of infections from trojans or malware?
View 1 Replies
View Related
Nov 29, 2011
I have a 6506 with SUP1, no MSFC running CatOS.
Module 1: Removed
Module 2: WS-X6K-SUP1A-2GE
Module 3: WS-X6348
Module 4: WS-X6348
Module 5: WS-X6408A-GBIC
Module 6: WS-X6408A-GBIC
However, it doesn't seems to be able to bootup properly. Could this be an hardware issue? What should I do?
View 5 Replies
View Related
Feb 5, 2012
A month after i had this laptop(bought new) its started have insanely slow connection times after booting up. The little blue circle starts to twirl meaning its searching for a wireless network. It then freezes and takes about 1 min- 5min to actually come back to normal and connect to a network. If i hibernate or standby there is no such problem, only after a fresh reboot. For this reason i usually never turn off my laptop, thus avoiding a lot network connection wait.
View 3 Replies
View Related
Apr 4, 2013
Customer has a Catalyst WS-C2960-48PST-L. and in some ports we have VoIP phones with PoE company Aastra. If I use first config we have problem when phone boot up.
First config:
description tp-11-voip
switchport access vlan 250
switchport mode access
switchport voice vlan 201
switchport port-security maximum 2
switchport port-security(code )
The MAC shown here is from a voip Phone. After the phone boot up, the p, because it must boot first in vlan 250 (access vlan). On the port you can only see the MAC from vlan 201. With the second config the phone can boot without problems:
interface FastEthernet0/48
description tp-11-voip
switchport access vlan 250
switchport mode access
switchport voice vlan 201
is there a reason, why it is the problem with the first config on cat2960 ? The same first config works with an Cat2950 without problems.
View 3 Replies
View Related
Oct 8, 2011
I recently upgraded a few 2960 switches to 15.0(1)SE, and while they are working fine, I did notice a strange syslog message upon boot-up that wasn't previously there. [code] I did some cursory searching via google but nothing useful presented itself.
View 7 Replies
View Related
Mar 12, 2012
I have a modem connected to a router wirelessly and an access point few computers have access to the internet and some has limited access even those close to the access point.
View 2 Replies
View Related
Nov 26, 2012
I am sharing a network with someone upstairs. They have a wired connection since they are close to the router - I'm using wireless.Routinely get 'No Network Access' or 'Limited Access' or 'No Internet' in the Wireless Network Connections box on my laptop and desktop.The person from who I am renting said it was a range issue. I purchased a range extender that plugs into the wall. This problem still persists, even for my laptop that I can take closer to the source.If I release the IP and renew it I can get a connection back but it usually craps out unexpectedly. This makes me think it's not a range issue, especially with the extender.When I look at an IP config report I notice "DHCP Enabled: No" and "Autoconfig. Enabled: Yes". I am not sure if I am sticking my nose in the right area with this last bit of information.
View 1 Replies
View Related
Apr 6, 2012
a new wireless adapter and modem installed, while everything can access the internet fine through this (including my laptop, which as far as I am aware does not support 802.11n) however her laptop can not access the internet. I can access wireless adapters but it say's that I am not connected and that connections are available.I thought that maybe it was a driver issue so I've updated to the latest (9.2.0.470) and still no luck. I got the driver from the Samsung page for the laptop, I tried it on my home network (which is not using 11n) and it still has the same problem. I've looked around but can't seem to fix it.
View 14 Replies
View Related
Nov 26, 2011
I attempt to log onto my parent's (golferguy) wireless network. It says under view your active networks: unidentified network (public network). Access type: No network access Connections: has the correct network name. When I click on hidden icons, it says that I have full reception but it says limited access.
View 11 Replies
View Related
May 12, 2011
I have limited access to internet
View 2 Replies
View Related
Jan 13, 2011
I justgot a new computer and I connected it to my wireless network but I don't have any access to the Internet
View 1 Replies
View Related
Jan 25, 2012
i got my laptop back from it being repaired. Even though they haven't actually fixed the problem But anyway i cant connect to the internet, it comes up with 'limited access'
View 14 Replies
View Related
May 23, 2011
I have such limited access to some site that I usually browse. For sometimes, I was blocked from those sites. Those are the sites where I can get a lot of data/information I needed. Mostly, I am about to finish my work and have browsed those particular site for many times, then, the page give me an WinNT error of something like �You don�t have permission to blah blah� or �limited access� which is frustrating sometimes.What will I do so that I can access those sites? How will I set up the proxy setting? Do I need to download proxy software to switches the proxy server automatically?
View 3 Replies
View Related
Dec 23, 2012
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersAcer>ipconfig
Windows IP Configuration
Wireless LAN adapter Wireless Network Connection 3:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
[code]....
View 4 Replies
View Related
Dec 9, 2012
The past two days have been frustrating with my wifi. When I first got on it, I checked the internet access because I couldn't get onto the internet. The connections had "limited access". I restarted my router and modem, and it did nothing. I unplugged everything and plugged it back it and the wifi would show, but I couldn't get on it. I restarted the router and modem, and it worked. I got on Cisco Connect and the signal wouldn't show. I got off the computer and later, I couldn't get on the internet again. Later on, I could get on the internet again. I got on Cisco Connect, and it still says that there is no connection. I haven't a clue what's going on. My modem is CenturyLink, and obviously, my router is Cisco.
View 19 Replies
View Related
May 12, 2012
My laptop running Windows 7 has been fine until this holiday, connected to a hotel wifi that "trapped" the broswer and requested a login and password. That worked fine, but now I cannot access any other wifi networks.It sits for a while after entering the code and then has limited access, running the troubleshooter it says that I have no valid IP address?Tried IPCONFIG /RELEASE and it is saying "No operation can be performed on Local Connection 2 while it has its media disconnected"
View 8 Replies
View Related
Sep 14, 2011
Using Outlook to send & recieve mails from a webmail hoster, I regularly get booted off the internet and am left with the Limited Access message. Usually unplugging the router clears it but it is a nuisance to say the least.I have even tried reverting to a cable but the problem continues.The problem even happens to my wife's Samsung laptop, although the info below is from mine. [code]
View 8 Replies
View Related
Aug 21, 2011
I am able to connect to my wifi but it shows LIMITED ACCESS and it show no internet access.I also tried to manually enter the same IP ADDRESS of another laptop by which i was able access Internet through the same wifi.
View 12 Replies
View Related
Mar 2, 2012
My father has just bought a new router, because the other one broke. But now the internet on my computer does not work.I connect to the wireless network. After some time it says limited access, but when i then click on the network icon on the bottom right corner and wait some seconds, i get full access again.
View 19 Replies
View Related
Jul 20, 2012
I been struggling to repair my internet connection for more than a month now and i haven't found an answer yet. what happens is that every time i re-start my computer or some some time it just disappeared, my net connection. In order to get my connection back there are a lot of different procedures and mix up that i'll have to go through until one of them hit something and return the connection back up. Below are the action so far i have taken:
1. Re-start my computer.
2. Re-start my router
3. Intentionally plug out and plug in the hard wire connection.
4. Change the adapter settings by disabling and enabling it.
5. Do the re-installment of the network through device manager and so on...
i even have tried re-installing my windows 7 but still the problem persist.i have un-install my built in anti-virus esset thinking it may have some how contributed in the disturbance.
Specs: Windows 7 32bit intel core i7
and below is my recent ipconfig
Windows IP Configuration
Host Name . . . . . . . . . . . . : LordUzumaki-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....
View 14 Replies
View Related
Jan 3, 2012
I have a home network that works perfectly fine on all my wireless devices except one of my laptops. I'm getting a yellow triangle with an exclamation mark inside of it in my connections map from "this computer" to the name of my wireless network. I am running windows 7 and I have no idea what is wrong. It used to work fine and just stopped all of a sudden. I'm not sure if my wife or I messed something up.
View 11 Replies
View Related
Jul 17, 2011
I am using an Del note pad and was using an wireless connection from Talk talk past 45 days and it was working fine. As a sudden now the system is displaying Limited access. when i try to connect the internet - wireless . this is an windows 7
View 1 Replies
View Related
Apr 1, 2012
how to share limited internet access with our tenants? We've run two 50 foot Ethernet cables to their unit. We're on Comcast Cable internet using a Linksys WRV200 router. Our connection ranges from 10-14Mbps down and 1-2Mbps up. We watch a lot of Netflix on our connection. I'd LIKE to limit their bandwidth so we can still enjoy Netflix. They MUST not see our Windows network.
View 1 Replies
View Related
May 3, 2011
I lost my internet a few days ago out of the blue. I have been in contact with my internet provider with no success. None of the troubleshooting options have worked and my security software is giving me warnings; but is unable to scan or update. I've rebooted, done a system restore and reset my IP settings via DOS, which has not worked either. I have full connectivity, just can't identify the network and therefore can't get passed to the internet. I have Windows 7.
View 1 Replies
View Related
Mar 10, 2011
i got one thing im in my office we have limited inter net acess but people are using much so i want to control the net. once only office hour
View 1 Replies
View Related
Apr 11, 2011
I am trying to figure out how to give computers that connect to my LAN limited access. I have heard that some viruses, though rare, may travel through the network and infect all computers on the network. I want to prevent this. Is there any way to give computers connected to my network strict access to only the internet to prevent viruses or any other harmful attacks?
View 1 Replies
View Related
Jun 10, 2011
all of a sudden my internet stop working and its now saying limited access ive tried all of thoose ipconfig things and none of them worked
View 19 Replies
View Related
Jun 23, 2012
My windows 7 desktop computer is giving me a "Limited Access" notice when i try to connect to my network. My laptop on the other hand can connect to it easily. I've tried several solutions that I found online, but nothing has worked yet. When I run command prompt ipconfig I get
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersJeffrey>ipconfig
Windows IP Configuration
C:UsersJeffrey>ipconfig /all
[code]...
View 9 Replies
View Related
Dec 5, 2012
I have a Compac Presario w/Vista and I'm getting a limited connectivity message and can't access the internet. My cable modem is connected straight to the computer by ethernet wire. It happened before and I unistalled the Vista update and it was fine. I can't see what the problem is this time cause my Event log won't come up saying that the Snapin for the MMC isn't properly loading. I am able to see alerts but there wasn't any on that date. My Norton's won't come up either stating that the side by side configuration isn't right.
View 12 Replies
View Related
