i got my laptop back from it being repaired. Even though they haven't actually fixed the problem But anyway i cant connect to the internet, it comes up with 'limited access'
View 14 RepliesI have limited access to internet
View 2 Replies View RelatedI have a modem connected to a router wirelessly and an access point few computers have access to the internet and some has limited access even those close to the access point.
View 2 Replies View RelatedUsing Outlook to send & recieve mails from a webmail hoster, I regularly get booted off the internet and am left with the Limited Access message. Usually unplugging the router clears it but it is a nuisance to say the least.I have even tried reverting to a cable but the problem continues.The problem even happens to my wife's Samsung laptop, although the info below is from mine. [code]
View 8 Replies View RelatedI lost my internet a few days ago out of the blue. I have been in contact with my internet provider with no success. None of the troubleshooting options have worked and my security software is giving me warnings; but is unable to scan or update. I've rebooted, done a system restore and reset my IP settings via DOS, which has not worked either. I have full connectivity, just can't identify the network and therefore can't get passed to the internet. I have Windows 7.
View 1 Replies View RelatedI am unable to connect to my home wifi from my laptop but it connects fine at work. All other devices (2 androids and 1 laptop) are able to connect to the home network. My laptop used to connect intermittently earlier - sometime the connection would be restored when i reset the router or restarted the laptop but now I'm just not able to at all. The message i get is either "Limited Access" or "Unidentified Network. No internet access" - the signal strength always is excellent. I have tried switching off and on the wireless router, have disabled and then enabled the wireless connec on the laptop, have reconfigured the wireless network on the router with a new network name and password but nothing works. However I am able to connect to the internet using the network cable - there were a few times where I couldn't do that either. I've tried browsing on several forums to get answers but haven't found any yet. [code]
View 12 Replies View RelatedI have a brand new Dell Ispiron 14z Ultrabook. I keep having problems with Wi-Fi connectivity. I can use the Ethernet connection fine, but when I try to connect to Wi-Fi I keep getting no access or limited connectivity. I have other devices and laptops that work fine on the same Wi-Fi networks
View 3 Replies View Relatedi got one thing im in my office we have limited inter net acess but people are using much so i want to control the net. once only office hour
View 1 Replies View Relatedall of a sudden my internet stop working and its now saying limited access ive tried all of thoose ipconfig things and none of them worked
View 19 Replies View Relatedwireless network connection connected but limited or no connectivity
View 1 Replies View RelatedI have: ASUS Netbook with Windows 7 Starter.
As of last night, I cannot connect to any of the wireless networks I use every day (my personal home network or my school's WPA2).
The signal strength is very good, but it says "Limited Access" next to the network name. Apparently "Limited" means "No" because I am not connected. Here's what happened:Lavasoft Ad-Aware was blocking a site that I needed to access. I haven't used Ad-Aware in months, and it did not even appear to be running. So uninstalled it with Add/Remove programs in the control panel. BUT, mid-way through the uninstallation, I got a blue screen and my computer restarted. When my computer booted back up, I could no longer connect to my home's wireless. I'm at school now and I cannot connect here either. Ad-aware is gone from the add/remove programs list, but there is still an Ad-Aware folder in Program Files. The folder still has a bunch of stuff in it, including adaware.exe. I dont see an uninstaller (but i havent really investigated that yet). so now i can't connect to any network. Here's What I've TriedRan troubleshooter. Useless. Turned off my netbook's wireless. turned it back on. Device manager says my Network Adapters are working fine. No yellow or red icons next to them. also tried resetting stuff with the command prompt. something about winsock and netsh. I don't know what I was doing though. just following instructions from other people on yahoo answers when i googled the problem.
AP has static IP with 2 SSIDs setup, one for guest one for domain access(both have the same issue), tried with multiple devices, both win and MAC, all show "connected but with limited access", ipconfig on those devices, all show ip "169.254.X.X", but event log on AP indicates that "authentication has been completed sucessfully".
using RADIUS server for authentication. management VLAN ID "1", SSID VLAN ID "11"
I am currently in Thailand and I have been using dozens of different wifi connections around Australia and South-east Asia without a problem for the last year. I moved into a new place yesterday and when I tried to connect, it has the little yellow triangle with an exclamation mark, over the wireless symbol on the taskbar. I tried the troubleshooter but it says turn the modem off an on, I don't think I can do this, I'll try and ask reception but I doubt they will let me.
No-one else at this place I am staying has had the same problem as me. The signal strength is "excellent", the wifi password is correct. I have windows 7 on a Dell Inspiron.
I am at my old place now, where the internet works. I downloaded the internet test thing from one of the stickies, I'll go and do that at my new place and post the results soon.
I can not connect to my wireless network from my pc. My laptop is fine. the internet worked like 5 times.. but it's been dead for two days now and everything I try seems to fail.i can see my router in connections, (sometimes not) And when i see it, it says limited acess and works for like10 mins..The OS is Windows 7 ultimate 64bit and im using a gigabyte GN-WB01GS USB WLAN card#2 network adapter. The signal strength is good. Ran all the windows trouble shooters... nothing, though it works wired. After clicking connect im told that it is attempting to authenticate forever and that is all that happens,I dont get why it works sometimes, then doesn't.when the internet works it have worked like 5 times (for 10 minutes) but now i cant even connect to it..Whenever i tried to download SOMETHING, it stopped working. And the internet i had those 5 times was were slow, not 54 mbit net. [code]
View 14 Replies View RelatedI recently added a new laptop to my network and it will only connect wirelessly for short periods of time and then it says limited connectivity. I had this problem with the old laptop and got it fixed but it was running windows xp and this one runs windows 7.
View 4 Replies View RelatedI have been having this problem with limited access with my internet. I have deleted mcafee, norton, photoshop, applications etc. I have restored the system to a previous date. I have disabled firewalls and antiviruses. I have an Acer Aspire with Broadcom 802.11n Network Adapter. I only have wireless as I am sharing my internet and therefore can't test it with an Ethernet cable. I cannot switch on and off the modem box either. I have this limited access which disappears by itself after a few minutes. Then it comes back again. I disable the wireless and enable it again which solves the problem for only a few minutes. I have checked my ip which is 192.168.1.20 with submask of 255 something - which I don't think is the problem.At last, I have switched to Safe mode with Networking but even in this mode I still have limited access. The internet connection keeps cutting off and on all the time.
View 2 Replies View RelatedIs it possible to configure remote access (IPSEC client) to force all traffic through the tunnel (no split tunnel) yet still limit the internal hosts that can be accessed?
I have been asked to provide remote access (via ASA5510) with the following requirements:
- the client should have unrestricted internet access via the ASA (the source address will appear to be the outside interface of the ASA)
- the client should have access to only two internal hosts (192.168.10.10 and 192.168.44.10)
Is there a way to limit access to those two internal hosts, while still providing secured internet access? The only way I can see is to use an access list on another device (for example our core switch).
I am sharing a network with someone upstairs. They have a wired connection since they are close to the router - I'm using wireless.Routinely get 'No Network Access' or 'Limited Access' or 'No Internet' in the Wireless Network Connections box on my laptop and desktop.The person from who I am renting said it was a range issue. I purchased a range extender that plugs into the wall. This problem still persists, even for my laptop that I can take closer to the source.If I release the IP and renew it I can get a connection back but it usually craps out unexpectedly. This makes me think it's not a range issue, especially with the extender.When I look at an IP config report I notice "DHCP Enabled: No" and "Autoconfig. Enabled: Yes". I am not sure if I am sticking my nose in the right area with this last bit of information.
View 1 Replies View Relateda new wireless adapter and modem installed, while everything can access the internet fine through this (including my laptop, which as far as I am aware does not support 802.11n) however her laptop can not access the internet. I can access wireless adapters but it say's that I am not connected and that connections are available.I thought that maybe it was a driver issue so I've updated to the latest (9.2.0.470) and still no luck. I got the driver from the Samsung page for the laptop, I tried it on my home network (which is not using 11n) and it still has the same problem. I've looked around but can't seem to fix it.
View 14 Replies View RelatedI attempt to log onto my parent's (golferguy) wireless network. It says under view your active networks: unidentified network (public network). Access type: No network access Connections: has the correct network name. When I click on hidden icons, it says that I have full reception but it says limited access.
View 11 Replies View RelatedI justgot a new computer and I connected it to my wireless network but I don't have any access to the Internet
View 1 Replies View RelatedI have such limited access to some site that I usually browse. For sometimes, I was blocked from those sites. Those are the sites where I can get a lot of data/information I needed. Mostly, I am about to finish my work and have browsed those particular site for many times, then, the page give me an WinNT error of something like �You don�t have permission to blah blah� or �limited access� which is frustrating sometimes.What will I do so that I can access those sites? How will I set up the proxy setting? Do I need to download proxy software to switches the proxy server automatically?
View 3 Replies View RelatedMicrosoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersAcer>ipconfig
Windows IP Configuration
Wireless LAN adapter Wireless Network Connection 3:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
[code]....
The past two days have been frustrating with my wifi. When I first got on it, I checked the internet access because I couldn't get onto the internet. The connections had "limited access". I restarted my router and modem, and it did nothing. I unplugged everything and plugged it back it and the wifi would show, but I couldn't get on it. I restarted the router and modem, and it worked. I got on Cisco Connect and the signal wouldn't show. I got off the computer and later, I couldn't get on the internet again. Later on, I could get on the internet again. I got on Cisco Connect, and it still says that there is no connection. I haven't a clue what's going on. My modem is CenturyLink, and obviously, my router is Cisco.
View 19 Replies View RelatedMy laptop running Windows 7 has been fine until this holiday, connected to a hotel wifi that "trapped" the broswer and requested a login and password. That worked fine, but now I cannot access any other wifi networks.It sits for a while after entering the code and then has limited access, running the troubleshooter it says that I have no valid IP address?Tried IPCONFIG /RELEASE and it is saying "No operation can be performed on Local Connection 2 while it has its media disconnected"
View 8 Replies View RelatedI am able to connect to my wifi but it shows LIMITED ACCESS and it show no internet access.I also tried to manually enter the same IP ADDRESS of another laptop by which i was able access Internet through the same wifi.
View 12 Replies View RelatedMy father has just bought a new router, because the other one broke. But now the internet on my computer does not work.I connect to the wireless network. After some time it says limited access, but when i then click on the network icon on the bottom right corner and wait some seconds, i get full access again.
View 19 Replies View RelatedI been struggling to repair my internet connection for more than a month now and i haven't found an answer yet. what happens is that every time i re-start my computer or some some time it just disappeared, my net connection. In order to get my connection back there are a lot of different procedures and mix up that i'll have to go through until one of them hit something and return the connection back up. Below are the action so far i have taken:
1. Re-start my computer.
2. Re-start my router
3. Intentionally plug out and plug in the hard wire connection.
4. Change the adapter settings by disabling and enabling it.
5. Do the re-installment of the network through device manager and so on...
i even have tried re-installing my windows 7 but still the problem persist.i have un-install my built in anti-virus esset thinking it may have some how contributed in the disturbance.
Specs: Windows 7 32bit intel core i7
and below is my recent ipconfig
Windows IP Configuration
Host Name . . . . . . . . . . . . : LordUzumaki-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....
I have a home network that works perfectly fine on all my wireless devices except one of my laptops. I'm getting a yellow triangle with an exclamation mark inside of it in my connections map from "this computer" to the name of my wireless network. I am running windows 7 and I have no idea what is wrong. It used to work fine and just stopped all of a sudden. I'm not sure if my wife or I messed something up.
View 11 Replies View RelatedI'm running on windows 7 professional with a realtek gigabit ethernet port. It's a gateway SX2370. It originally came with home premium and a bunch of bloatware so I restored with pro. I thought I installed all the drivers but a few minutes after bootup, the ethernet breaks. It works for a few minutes, as I can access the internet, and then itt gives me the no internet access error. I used a usb wireless card and that works after bootup, but doesn't run as nearly as fast as my gigabit ethernet.
View 5 Replies View RelatedI am using an Del note pad and was using an wireless connection from Talk talk past 45 days and it was working fine. As a sudden now the system is displaying Limited access. when i try to connect the internet - wireless . this is an windows 7
View 1 Replies View Relatedhow to share limited internet access with our tenants? We've run two 50 foot Ethernet cables to their unit. We're on Comcast Cable internet using a Linksys WRV200 router. Our connection ranges from 10-14Mbps down and 1-2Mbps up. We watch a lot of Netflix on our connection. I'd LIKE to limit their bandwidth so we can still enjoy Netflix. They MUST not see our Windows network.
View 1 Replies View RelatedI am trying to figure out how to give computers that connect to my LAN limited access. I have heard that some viruses, though rare, may travel through the network and infect all computers on the network. I want to prevent this. Is there any way to give computers connected to my network strict access to only the internet to prevent viruses or any other harmful attacks?
View 1 Replies View Related