Linksys Wireless Adapters :: WUSB54GC Ver1 Can't Reinstalled?
Apr 2, 2011
I had installed the wusb54gc wireless adapter on my desktop and I have not used the computer in a year. When I tried to connect to the internet I couldn't. the adapter was in the network, now it is not. Now all I get is unknown device. I downloaded the drivers from Linksys removed the unknown device from the usb listing and used the utility to unstall the adapter drivers. Followed the instruction to install new drivers but after restarting the computer the only thing that is there is the unknown device. On this computer the OS is Me.
View 1 Replies
ADVERTISEMENT
Apr 4, 2011
I have a WMP54GS Installed in a SONY VAIO with a Pentium 4 2.6 ghz processor, 2 gb of DDR Ram, and Just over 60 GB of Hard Drive space. I've run this setup for over two years at this point, all on an XP operating System, from sp1 all the way up to sp3 with no issues. A week ago I ended up with a trojan on my system, and had to do a full recovery. This time I used an XP Pro copy that came with sp2. Not the same copy of XP that had been running previously. Needless to say when I had the OS finally installed and running, it didn't recognise my wireless adapter. I figured I needed to run through the same process as I had when I first purchased the adapter, and took the card out, ran the intsallation disc, followed the intructions, powered off, and reinserted the card. When I booted back up, there was simply a gray box in the lower left showing "disabled". I clicked on it, and it showed that there were no networks in range, when there should have been several. The only tab on the screen that I was able to click was "exit". I wasn't able to perform manual setup, and when I clicked the "xp setup" option, nothing happened. I was unable to find the device in the device manager (though it may be in the "other devices" list with a question mark, but I can't tell. Would it be something like "network controller" or "ethernet device"?) It doesn't appear in my network connections either. The LED on the card itself is dormant. Nothing happening. I figured at this point that it must not be fastened adequatly to the PCI slot. So I opened the case, took the card out, and fastened it back in nice in tight. No more give, and in the same slot it had always been in when operating properly. Still the same issue. I've done this a couple more times now, and with the same results. I just don't get it. I've followed the intrsuctions to the letter, and no results. Do I perhaps need to skip the cd and try to install the latest drivers for the card instead? Will that allow my PC to recognise it? I have another machine in my home, and can download a driver and transfer it by disc or flash drive to the other machine if need be.
View 1 Replies
View Related
Mar 8, 2011
i tried down loading drivers but computer still says needs cd.
View 4 Replies
View Related
Feb 28, 2011
I recently installed this adapter, and it's connected to a wireless-N router right now (WRT102N), the problem I'm having is it's not sending out internet connection once I boot up the next day. It'll work once I click reconnect to connect to the network again, but still, I don't think it should be doing that.
View 4 Replies
View Related
Feb 15, 2011
I have a Wireless-G USB Compact USB Network Adapter (WUSB54GC V1.0). Running XP. How do I set Promiscuous mode for this adapter?
View 1 Replies
View Related
Jul 13, 2011
I need to download XP drivers for my WUSB54GC ver3 Wireless Adapter. I have lost the CD (or can't find it at least) and on the site there seem to be only Vista/windows 7 drivers for the version 3. Will downloading the version 2 XP drivers do? Or should I do something else?
View 1 Replies
View Related
Mar 7, 2012
I am having problems installing this with the cd that was given, so I went on the site to DL the drivers, i downloaded the zip file, but when i open it there is no setup.exe. Do i need to exract the contents to a certain file?
View 1 Replies
View Related
May 21, 2009
I have been having trouble lately getting a desktop pc that formally worked to now access the internet. I deleted the drivers and re-installed them and now it is saying it cannot renew the IP address. how to get this connected again? When I look at the hardware under device manager it says it is working properly. When I downloaded the driver again it did ask if I needed ver1 or version 3 Since my device has no version on it I chose version one.I also have a new N Rangeplus Linksys router because I thought maybe I was having router problems but that isn't it. This router is a Linksys G router and all the devices will work with it accept the one with this wireless card., I do want to change to the N router eventually.
View 4 Replies
View Related
Dec 19, 2010
Using a WUSB54GC that's installed on a PC and then used in a DVD recorder.So the installation procedure takes place on the PC.After installation WUSB54GC is disconnected and placed in DVD - recorder. I want my DVD recorder on my home network in order to be able to burn movies.
View 3 Replies
View Related
Aug 16, 2011
I cannot find a driver for this model. The linksys donwload site has version 1, 2, and 4... not ver.3
View 5 Replies
View Related
Dec 4, 2009
i just got a new computer and just got windows 7 for it. I was installing my wireless adapter when the error 211 came up. I saw on your website how to manualy install it but i cant do the first step which is: Search and download Windows 7 driver for your Adapter. I cant do this because i cant get on the internet on that computer without a wireless adapter because it is to far away from my routor. What can I do?
View 3 Replies
View Related
Dec 3, 2008
I'm looking for the xp driver for the Compact Wireless-G USB Adapter Model Number: WUSB54GC. Linksys only has the vista one listed. Dwhere to find it?
View 5 Replies
View Related
Aug 25, 2011
Model No. WUSB54GCIs software available for use on Linux?
View 3 Replies
View Related
May 26, 2011
Whenever I try to install the drivers for the adapter normally, Windows 7x64 gives me a message that the device name "Compact Wireless-G USB Network Adapter" already exists and is in use, preventing me from installing the wireless driver properly. In order to get around it, I changed all "Compact Wireless-G USB Network Adapter" fields into "Compact Wireless-G USB Network Adapter B" in the netr28ux.inf file to make the driver install under a different name.I tried everything I can to remove all evidence of linksys drivers from my computer, uninstalling and removing driverstore with pnputil.exe, but I cannot seem to find the originating files to uninstall.For now the way I edited the netr28ux.inf file works, but I'd rather be able to install the driver as intended.
View 6 Replies
View Related
May 26, 2009
So I bought the WUSB54GC wireless adapter today. My computer's OS is Windows XP Professional. Whenever I load the disk and click "Start Setup" a window pops up that says "This version of Windows in not supported."
View 9 Replies
View Related
Feb 13, 2011
I've just bought this wireless usb today and attempted 2-3 times to be able to connect with my router (D-Link's DIR-601) but it for some reason failed to do so, until the little usb didn't have its green light flashing anymore... and when i reconnected it to my Windows XP it rang its error sound... and I kept having this message from the Wireless Wizard that it's not connected appropriately or something...and that i have to run the setup wizard again.
View 1 Replies
View Related
Feb 22, 2013
I have a Linksys wusb54gc, after downloading driver and install, system performance changed. Tried several fixes suggested at another site which failed Cannot delete (access denied) Trying to remove through control panel error "critical file missing" win xp os. Would like for this to work as it had on the computer it was originally purchased for. "gina.dll" interferes with the os.
View 2 Replies
View Related
Aug 11, 2010
I have my brand new WUSB54GC and I can't install it. My operating system is Windows Me and every program on the CD accompanying my new adapter tells me "This version of Windows won't work" or words to that effect. My machine realizes something is there--indeed it knows there is a Linksys wireless adapter and even tells me it was manufactured by Cisco Co.--but it says NDIS cannot load the driver. Do I need a different driver?
View 6 Replies
View Related
Apr 6, 2011
I would like to use my WUSB54GC ver2 adapter with a WIN7 ultimate 64-bit PC. Do I have any chance to use it on this computer? Linksys' website says that only ver3 adapters can use the WIN7 driver.
View 3 Replies
View Related
Jan 15, 2012
I need the Windows XP WUSB54GC V.3 Driver!
All of the other threads on this forum have expired links to the driver. Where can I find it? I've looked for hours & the cisco website offers nothing for Windows XP for WUSB54GC Version 3
View 1 Replies
View Related
Mar 26, 2010
I have installed manually drivers for wusb54gc v3, but the wireless manager still write error 211. I do see the adapter in device manager and it's writen than it's working, bat still the manager doesn't work and ican't see any net. OS Win7 32bit.
View 9 Replies
View Related
Mar 2, 2011
I want to use this adapter on a computer with Windows 7 Home Premium 64bit OS.Downloads lists versions V1.0 and V3.0 for this adapter. How can I determine the version I have?V1.0 list no driver for Win 7 64bit. V3.0 list a driver for Win 7 64bit.Research I found looks like the adapter is not computable with Win 7 64bit.
View 2 Replies
View Related
Mar 31, 2012
my router's wifi has no internet access tried hard reset and firmware upgrade. but i can used it when i connect my laptop on the lan ports.
View 3 Replies
View Related
Nov 22, 2012
usb adapter wusb54gc drivers for mac os x
View 3 Replies
View Related
Dec 13, 2011
linksys wireless usb adapter wusb54gc ver 3 drivers.where will i find the drivers?
View 5 Replies
View Related
May 25, 2013
I am running "PLEX Media server" on a PC and have a "Roku" client working perfectly on my home network
I am trying to use the "My PLEX" feature of "PLEX" to stream my content to the internet and access it on a Nook or iPod from any internet hot spot. This requires that the router supports DLNA. I am not sure what this is and am not successful at this so far.
Although it may sound like I know what I'm talking about I am at my limit and do not know how to determine if my router will support DLNA.
Is it time to get a new router or is there something I need to do to the router so it supports DLNA?
View 1 Replies
View Related
Jan 17, 2012
I ended up having to reinstall windows xp because my explorer.exe file was corrupted, now windows is working again but my laptop does not give me any options for a wireless connection. If I plug an ethernet cable from my router to the laptop it works fine, but it wont find the router wirelessly. so i deleted and reinstalled the modem drivers which caused a popup when windows was restarted, it says:The file 'ptserli.sy_' on disk 1 is needed.Type the path where the file is located, then click OK
View 4 Replies
View Related
Aug 20, 2012
I recently reinstalled XP but 8 yrs ago Dell forgot to give me a drivers/utilites disk (I got 2 for the monitor instead).I downloaded the ethernet driver from my other computer via USB, installed it and since I now had internet access, I was able to directly download the remaining drivers via my service tag Computer & all programs are running like new again, but I KNOW my 3000 had wireless before but under Device Manager/Network, it only shows an Intel PRO/100 VE (my original paperwork say Intel PRO/100M). I know it had wireless before - my ASUS router wasn't wired to the computer and internet access was great. I want to ditch the pesky cord again.
View 2 Replies
View Related
Jul 22, 2012
I rebooted my inspiron 1405 and lost my wireless connections.what can I do to have it back
View 2 Replies
View Related
May 17, 2012
I recently re-installed Windows XP on my computer,
I re-installed the drivers, but my wirless card does not work,
The Dell wirless program states the radio is disabled press Fn-F2 to activate it
Fn-F2 has no effect.
View 1 Replies
View Related
Jul 11, 2011
Have a wireless adapter "WUSB54GC" Ver 3. Need driver for OS Linux
View 1 Replies
View Related
Jan 19, 2012
(After rechecking my OS Resource CD, i realized there was a second section on it that had the last few drivers xD) Ok, so i recently posted about an OS problem that was solved, however, after installation i cannot connect to the internet on my PC.i reinstalled the drivers and all, but it doesn't connect (all wires connected and in place)do i need to do something in the computer to connect to the internet? When I check ipconfig in the cmd prompt it jsut says "Windows IP Configuration" and no information appears after that.
Also when i check the device manager , my network adapter is installed but there are 4 yellow questions marks on:
"ethernet controller"
"multimedia audio controller"
"PCI device"
SM Bus Controller"
View 1 Replies
View Related
May 23, 2011
I replaced the hard drive on my desktop with a bigger one. Installed Windows XP (w/service pack 1A) but I cannot access the Internet now. I have a broadband connection that is always on. LAN shows connected.
View 3 Replies
View Related
