Linksys Wireless Router :: 4200 Why Password Required For Insecure Network
Dec 13, 2011
My linksys 4200 was set up some time ago for me, (unsecured) and was working fine. I was having problems with just 1 desktop that was using a usb wireless adapter, so I went and purchased a new cisco ae2500. While connecting I used the push button that it described, only it knocked out the network, and all the other computers are now off of the network. The new network(s) are Cisco_WPS_42526 (secure) and Cisco_WPS_42526-guest. Not knowing the network key and the guys that set it up are gone, I tried the guest. WHICH REQUIRES A PASSWORD!!!! I can now not get ANY of my computers online! How do I find the security, or the password? Why would you need a password for an insecure network anyway?
View 2 Replies
ADVERTISEMENT
Dec 7, 2012
I would like for Cisco to offer a firmware update for my 4200 so that the password for the guest account can be disabled.
View 1 Replies
View Related
May 3, 2012
I have the E4200. I have two networks, a 2.4 for internet, and a 5gHz for media. I want to have a wired connection to the 5gHz network as some of the media is on my PC. However, it seems I can only have a wired connection to the 2.4gHz network. Is there any way to do this?
View 3 Replies
View Related
Jul 18, 2011
A username and password are being requested by http://192.168.1.1. The site says: "E1000"
View 1 Replies
View Related
Nov 27, 2011
Just set-up a new X2000, loaded latest firmware 2.0.01, configured it via the web UI ('Browser based utility' as per the manual). Connected OK to my ADSL broadband by O2. Configured wireless, everything OK. Funny it doesn't need a user name, only a password, my prevoius WAG160N could be configured for both.Now I want to configure the Parental Controls, BUT apart from my computer name and an Android phone name, all I see in the Target Device ADD button pop-up are a list of repeated 'Network Device'. There seems no way to be able to distinguish which is which device (mix of XP & Win 7 PC's and HP Printer through a separate switch), as it does not show IP address or MAC.
I thought I may have better luck with the Cisco Connect software (which I didn't use to set-up the router). I downloaded the latest version 1.4.11194.0, and ran this on another computer with wireless. Apart from reconfiguring my static IP address to DHCP, and then connecting through DHCP, the software said it could not configure my router. So it never gets to a point where it installs any program on the computer so that I can configure Parental Controls. How do I get the router to show ALL the computer names in the list rather than 'Network Device' or is there a way to distinguish which 'Network Device' is which computer?
View 2 Replies
View Related
Oct 25, 2012
I want to upgrade the firmware for the router wrp400 , i am asked Username & Password in order to update the firmware.I tried admin/admin does not work. I tried to reset the router, same thing, I have no ISP user and password.
View 1 Replies
View Related
Jul 30, 2011
Using Cisco Connest I set up a password for guest access. It will function for a time then suddenly become insecure. Sometimes it will function for a month, sometimes a week. I have to reset the Unit to factory defaults each time and began again.
View 3 Replies
View Related
Jan 28, 2012
To improve the security of my 4200 v1 router, I turned on in the router configuration "Access via HTTPS" and after the reboot I could not access my router via the browser even when I click on the browser message to continue. What do I need to configure either in the router or my browser to use HTTPS?
View 9 Replies
View Related
Sep 20, 2011
I have home network with my Linksys E-4200.
My HP Microserver (Ubuntu +Samba+Apache) is connected via LAN. I have notebook (Windows 7). To my server (FILE+WEB) I have access only when I connected via LAN cable. In windows 7 i see my server and have access to the files. Webserver works also properly: access with the name of the server in web browser.
But by WiFI connection, there is no access ! The server has the reserved local IP-address, like 192.168.1.200.
What should I do to solve it? By typing "192.168.1.200" i see the localhost page, but nothing more!
View 2 Replies
View Related
Dec 8, 2011
My parents for the last few years have discussed a desire to be able to get internet access out at their pond. The pond is located about 200 feet or so from the house. Roughly between the house and pond is our barn. I would like to set up an outdoor network that would give them access to the internet at these ranges.
Currently, we have a linksys WRT54GL in the house. My plan was to add an additional WRT54GL in our garage as well as a wireless expander in our barn (I was considering the EnGenius ERB9250). Would the WRT54GL have enough range to reach the barn, and would a repeater be capable of reproducing the signal?
If not, do you have any other reccomendations as to how I might achieve this (without reaching too deep into my pockets)?
View 7 Replies
View Related
Aug 29, 2012
I need an example of a insecure network configuration that is may occur in small-business.For example insecure devices that can be used or how they are connected with each other. Also router/nas/pc configurations. With wireless network it is easy, but i am not familiar with wired networks. Specially I need weak points of a router configurations and weakly designed connections between different devices.I need to design a insecure small-business network configuration for my school project. For example 2 workstations, 1 laptop, NAS, network printer, VoIP telephone etc. After that I need to analyse these weak points.
View 3 Replies
View Related
May 2, 2012
We have a problem with AIR-LAP1142N access points.
AIR-LAP1142N-E-K9
Version 12.4(21a)JA
LAP's are not assotiated with controller yet. They get the ip address via dhcp, they are reachable by icmp.When I try to telnet, I get Password required, but none set? Is there any chance to get access to them without using serial port?
View 7 Replies
View Related
Dec 18, 2012
I have a small network of computers and printers in my tax office and consist of three computers running in window xp professional, one computer is designated as the server workstation and the c drive is the share drive and the other two work stations are mapped to the share drive c on the server workstation . so i am using peer to peer networking and these three computers are connected by a seven port router and two other printer are attached to the router also. i am having a problem printing from the computers to these printers, one is a hp laserjet 4200 and another is a hp laserjet all in one 3055.
In the past i just click and i would print, but a few day ago when i click print from either workstation it would que it to printing but it would have a message that it could not find my printer on the network. dont know why it all of a sudden stop working. do not know anything about setting up a printer on a network. do note the printers are connected to the router and not directly to the server workstation computer via usb. So the two workstation and the server workstation have the printer software on the C drive of each computer but for some reason it could not find the printers on the network. How to network a hp laserjet 4200 and Hp laserjet 3055 in a network that is connected by by one seven port router. why is the printers not in the network?
View 1 Replies
View Related
Aug 22, 2011
I have a linsys router with 4 computers, we just add a new ipad and can't find my home network password
View 2 Replies
View Related
May 1, 2013
I have been trying for the better half of the morning and afternoon to configure my family's wireless network. In particular, I would like to password protect the Wifi in such a way that every time I disconnect from the internet, a password is required to reconnect.I have setup the password and confirmed that it works properly when other machines in the house try to connect; however, the main computer I have used to set everything up is also a shared computer. Every time I disconnect from the internet and reconnect, it automatically connects without requesting the Wifi password.
Because it is a shared computer, I would like to disable internet access while I am away but leave the rest of the computer functional. Creating separate user accounts is not an option at this time.Is there any way to require that every computer submit the Wifi password after disconnecting and attempting to reconnect?
View 3 Replies
View Related
Dec 27, 2011
I'm trying to connect my Kindle to my wireless router. I cant find my password for my network. I have a Linksys E1000.
View 1 Replies
View Related
Aug 26, 2012
I am looking to get access to an external hard drive that I have set up on my wireless network.When I try to do an automated Windows backup (off my Vista based laptop files) on to an external hard drive which is connected to my wireless network (through a Belkin router) I am being asked for a user name and password to access the connected hard drive on the network. The thing is that I don't remember setting up a username and password for the hard drive at all. I can paste single files mannually onto the external hard drive without being asked for a username and password. I did perform an automated Windows backup off my other Windows 7 laptop and was not ask for a username and password. where to find the username and password information ?
View 3 Replies
View Related
Mar 17, 2012
I have an E2500 router. When I enter 192.168.1.1 as a web address I am asked for a User name and password. When I do not enter anything for user name and put “admin” in password the screen again asks me for the same two things and eventually goes to a 401 message.
When I enter admin in user name and my secure password to allow devises to connect to the network it lets me in. I thought the password to enter the system settings and the one to enter the network are usually separate. When I open the Cisco Connect program and go into the various menus there my “secure” password is written and visible for anyone who clicks it. Is this how it is supposed to work?Also, how do I occasionally change the password to enter into the network.
View 6 Replies
View Related
Apr 9, 2013
Model wrt54gsWindows xpI got the wireless network setup and password protected and my computer and phone can sign o the wireless network, but when I try to go to a website it doesn't work. If I connect te computer directly to the modem then it works.
View 2 Replies
View Related
May 16, 2012
The network id name for my router has reverted back to linksys a couple of times, also with the loss of password.
View 4 Replies
View Related
Sep 16, 2011
When I set up the E4200, the LinkSys tech had me code the name aquapanda and aquapanda1 for the "guest"....now when I look at the computer right hand corner icon I can see the wireless networks available in my area and I see aquapanda as "secured" and aquapanda1 as "unsecured" does this mean somebody in my neighborhood and use aquapanda1? I entered a password for aquapanda which is what I am using. Aquapanda1, the quest "unsecured" network has a small yellow icon showing but I do not remember entering a password for this...does my password for aquapanda cover the aquapanda1 network?
View 2 Replies
View Related
Jun 17, 2012
I am attempting to install an HP Photosmart 7515 eAll-in-One Printer. Works OK in the USB "tethered" mode, as a one-computer printer only. It will not install as a wi-fi device, probable reason being the settings on my (wireless) router, according to the printer's Wireless Network Test Results sheet. I suspect that the firmware on it (3.0.02) is obsolete. What is the latest firmware version for the WRT160N ?
View 5 Replies
View Related
May 16, 2012
I'm currently trying to upgrade my linksys WRT54G v1.1 router using the WRT54G-EU_fw,0 file, however when I press upgrade it comes up with a message saying "Incorrect Image File!". The current firmware version is v1.42.2 Is there any way to fix this so I can upgrade it?
View 4 Replies
View Related
Sep 1, 2011
I'm trying to enable LAG between WLC and a Juniper switch EX-4200 but it is not working.
In the lab i managed to enable LACP between Cisco 2960 and juniper EX-4200 and works with the atached configs that i found on juniper forum. Also LACP between Cisco 2960 and WLC works with te same config, but never between the WLC and Juniper. I've tried with passive mode and slow mode, always seems that juniper is not seeing the WLC BPDUs. I tried with WLC 4402 and 5508 both with 7.0 firmware.
View 4 Replies
View Related
Nov 11, 2012
is it possible to eliminate the the guest login screen from being displayed/required to acess router from an added device(like a smart tv with a web browser)?router is an e2500,approx.
View 4 Replies
View Related
Mar 5, 2013
There are free vpn services. When the vpn adds a pad lock to the network icon, is it then secure to use it on insecure networks like public wifi to get internet access? I mean, the password is given to you from the vpn provider's website.
View 7 Replies
View Related
Mar 25, 2013
I am using Cisco 861 router for simple network access. I have configured the router correctly with support from few folks of this community but now I am facing a different problem. I am able to ping, tracert and nslookup any internet destination. I am also able to brows secure sites like [URL] but normal URLs like [URL] is not working. I have tried to debug IP TCP Packet Port 80 but it is not showing any results.
View 2 Replies
View Related
Jun 2, 2012
From what I understand, it requires a 5V 2.5A adapter ... alas, cannot find one.
View 2 Replies
View Related
Feb 9, 2011
I am connecting my laptop to a wireless connection I am at connect to network. and enter network security key. do not know the security key
View 2 Replies
View Related
Jun 30, 2012
I am installing my AE1000 in a new computer. During installation I enter my wireless network password which is on 5 characters long but the next tab does not light up to proceed to the next step. It only lights with 8 characters though my password is 5 characters long
View 2 Replies
View Related
May 26, 2012
what is the password for my wireless router network?
View 1 Replies
View Related
Mar 3, 2012
I need to set a password for my wireless network router
View 1 Replies
View Related
Aug 19, 2011
I have a Linksys BEFSX41 wired router. If I wanted to connect a second computer to my router, what would be the maximum length of cable I can use without experiencing any problems ?
View 3 Replies
View Related
