Just finished the setup for Canon MP780 USB printer to work with EA4500. Printer goes online only while it prints the pages. When I try to scan the document with MP Navigator it cannot communicate with the scanner as printer is essentially offline. How to setup the printer in order to perform the scan of the documents?
View 2 Replies
I added some files to the hard drive which is connected to EA4500 by USB. I went to the Storage--Media Server Tab and clicked Scan All. I turned on the TV and pointed the DLNA Media Server at the hard drive.
The new files did not show up. They did show up a few hours later. Does the Scan button do anything?
I cannot access the WRT610n setup/management pages wirelessly from my Macbook using safari. I can access the router via wireless from iPhone and PC and I can access it from the Macbook via ethernet cable.
When I try to access the router from the Macbook I just get "Contacting..." in the Safari status line and eventually it times out.
I can access the internet using Safari via WRT610n wireless. The only page I can't access is the router's management page.
My old linksyst wap could see the printer without any special configuration, the new one cannot ,also changing out anther pc with iTunes on it and the two cannot see each other
View 5 Replies View RelatedCan i now best setup router E3000 for my ps3 online gaming and call of duty black ops
View 1 Replies View RelatedI recently purchased a EA4500 for my home network. After hours of searching, I couldn't find any evidence to how I can install a USB printer without the obvious Cisco Cloud Connect. I don't need any software or account to access my router over the net nor any of the features CCC provides (at least as of yet). I'm quite comfortable with using the web interface and easily managed to adjust the router for everything I need except the printer part. I certainly have things to print so I have to connect my printer to the router as it is clearly mentioned on its box that I can access my printer through it. As a last resort I tried to install the software on the CD that came with it to get a link for some "Cisco VUSB" software which I think is the solution but it keeps saying my modem is not connected to the net. It clearly isn't because I don't have an internet connection at home. What I have is a 3G connection which I use for communicating and downloads I need. So why do I need an internet connection on the router for anything and how do I install my printer?
View 3 Replies View RelatedI have recently updated linksys ea4500 router with smart Wi-Fi firmware and installed USB printer with cisco usb software .on my laptop with windows xp on Wi-Fi it is working fine but on other laptop with windows 8 on wifi it is keep on connecting and disconnecting in status bar it shows unexpected disconnection.i want to use this printer from both laptops on wireless when ever needed
View 1 Replies View Relatedi havent been able to print anything wirless or even with the usb cord in about a wk. i can try to print out anything it will say printing or nothing and nothing happens. just when i search to see whats going on, its says that certain amount of documents are waiting/pending. ive canceled them several times. i also know about the printer spooler i fixed that and i thought that was it, cuz i was able to print a color page for my kids right after, but after that i wasent unless i did the spooler thing again. and i try to print something from any sight and pop up thing comes out ive just moved it today to allow only for secure sights only. also i i went into printer setup and software did what it asked and nothing still. im on this page now told me to check ip address printed out for wirless network and it shows but and i viewed the summary for wired and there nothing shows. oh it wont print anything i need to print but it does print automatically epicurious receipe everyday. i have a windows 7 hp computer and and hp officejet pro 8600 all in one printer. i have set up to wireless.
View 1 Replies View RelatedI can't run the setup cd on my mac running OS 10.8.2.
View 2 Replies View RelatedI setup several devices in the Parental Controls to be blocked always. These devices are still able to connect to the router. I tried rebooting the router but the problem persists. I have two laptops and two iPod Touches that can connect regardless of the access restrictions.
View 5 Replies View Relateddo i have to have a separate connection from the printer to the laptop. i only have one connection into power board.
View 1 Replies View RelatedI have a Linksys EA4500 setup on my corporate network for wireless access. I have enabled the guest network and from all I can tell it's on a seperate subnet from my internal network like it should be. 192.168.x.x My internal is on a 10.x.x.x network. I conenct to the guest network using a laptop and I'm prompted for a password to get to the internet, which I like. The one issue I'm seeing is when I'm connected to the guest network I can still do an RDP session to internal resources. How is this possible if the guest network is on a seperate subnet?I take a laptop which has not been joined to my domain, connect to the guest ssid, and then open an RPD session and enter an IP address for an internal server and it connects. Is there a setting to keep this from happening
View 6 Replies View RelatedI have to put cd in and run setup every time I want to get online. WHY
View 2 Replies View RelatedHow do I setup a WRT160N as a wireless adapter to connect a wireless printer to my network? I do not use the wrt 160 as a router because I have an AT&T router for u-verse connection. Also, I physically cannot wire the printer to the main router (opposite corners of the house).
View 2 Replies View RelatedI just bought a new router for my home network. It is the Cisco linksys EA4500. It looks great and is rich with features but I just wish I didn't buy it!
My old wireless router started to have its wireless signal very weak, hence this new linksys router. When it is time to setup the router, I just did what was supposed to be done(which is very straight forward, just a matter of choosing pppoe and inputting a username and password) and went ahead to test the internet connection which didn't work! Upon inspection, I discovered that the lights on the internet port on the router(WAN port) didn't turn on at all as if the cable wasn't connected. I quickly checked all connections and to kill any doubt I reconnected the cable to the old router to make sure it is working and it worked. So there is nothing wrong with the cable!
I tried everything one can think of to no avail. The only conclusion one would draw from this whole scenario is that the new router is bad. So, I took it back to the shop I bought it from and before giving me another one, he said he will test it out and I said okay. Surprisingly enough, it just worked !!! Don't ask me why but it just did work beautifully, although at my house if you plug the cat6 cable(that you know for sure has internet) into its internet port, it won't even turn its lights on.
[code] I had a new wireless DSL router installed on the network. The router recognizes both the laptop and printer and I can print documents from the laptop fine. I cannot print an accessed webpage from any browser (Firefox, Chrome or IE).
View 1 Replies View RelatedI have a dell 2155CDN network printer I want to scan files over the network when I scan once it finishes I get a SMB List error and the file does not go trough here is a picture of my settings?
View 4 Replies View RelatedI can print from hp printer photosmart c6280 but cannot scan its on network
View 1 Replies View RelatedConnected our Brother MFC-8820D printer/scanner/fax directly to one of the 4 Ethernet ports on the back of the DIR-655 in our new install with this router, and all computers can print to it, whether connected via an Ethernet cable or via wireless, but none of the printers can scan. We just get an error message. Scanner driver is installed on all computers. Same printer worked fine via Ethernet on a Windows small business server for printing and scanning. Windows server no longer used or connected. Only DIR-655 as we are dumbing down and getting rid of our Windows server and have gone to a NAS solution connected to the DIR-655.
What can we do to make the scanning work on our Multifunction printer?
Just bought myself an 825. I've got it set up and working, but how do I prevent wireless users from accessing the setup pages for the router?
I only wish wired access to the setup pages. I'm used to doing this on my old linksys, but can't find the setting on the new router.
I have an Canon MP 530 that works great for my home office network, but right now it's being shared off one of my PCs. I would like to network it like my HP LaserJet P2055dn, but not just printing, also fax and scan (via Adobe Acrobat Pro). Does this product really exist.
About two years ago I bought a Linksys device that turned out to be a $100 mistake, but now I'm really needing this sharing functionality.
have problem with WRT54GH, almost every second page after reload gets an error message: Error 101 (net::ERR_CONNECTION_RESET): The connection was reset. Tried both on IE, Firefox, Chrome Tried to disable antivirus, no effect, the pages still load not all the time, firmware upgraded to the latest version. Before didi not have such problem with Zyxel W330EE.
View 4 Replies View Relatedconnect usb printer to d-link n2760 router i plugged in the printer diagnsotic failed
View 2 Replies View RelatedBy now, I'm sure E4200 and other Router users that have twonky have noticed they cannot access the twonky configuration pages, as you have chosen to block them. Please give advanced users a work around to this, because if Twonky does not recognize our newer TV/devices, then we cannot play certain file formats without manually configuring the service.
View 3 Replies View RelatedHow do I get printer back online?
View 1 Replies View RelatedI am getting frequent stop pages in streamed video, a message appears on my laptop saying "loading" and a red line beginning traversing the screen. Eventually the line gets across and the video begins again to stream. When I do a speed test I get around 10 Mbps both through the router wireless and hardwired connections. This happens almost every 10 minutes. I have tried rebooting the router and the problem persists
View 9 Replies View RelatedHave laptop connected to home network. Printer keeps showing offline and wil not print. Have went to control panel and set as default printer. I see no selection to change to "online" Other computer prints with no problem.
View 1 Replies View RelatedI am unable to view my qms 2200 on my window 7 network. I have checked drivers, ip addresses and just about everything I can think of I have even hired 2 different tech people who were unable to get as far as I got and charged me an arm and a leg. the message I get from the trouble shooter is contact your network admin and the printer is offline. What or how do I find the what seems like a simple solution to get the printer online before I stub my toe on drop kicking this thing....
View 1 Replies View RelatedYesterday my wireless internet suddenly stopped working. I plugged the ethernet cable directly from the modem to the computer and everything was fine, so I reset the router, reconnected it to the modem, and went to the setup page 192.168.1.1. I reconfigured the router on the setup page, leaving all previous settings the same (except I renamed the network from linksys to our own name and reconfirmed the WPA Personal password). My computer can connect to the wireless network but I can't go online.
View 9 Replies View RelatedI have a Linky E2000 and i´m having problems connecting laptops. My laptop is working fine but my girlfriends just wont work. I have a modem for internet and from there a networkcable is plugged in my Linky E2000. I´ve installed the router on my laptop with the following disc. I can go online wireless but my girlfriend can´t. Is it possible to go online wireless with two laptops?
View 1 Replies View RelatedI would like to be able to access my DSL Modem's http setup screens from my networked computers via my DIR-655 (rev B) router - but I do not know how to get the router to route to the WAN port.
At first, I had my DSL Modem's LAN IP at 192.168.0.1 and my DIR-655 at 192.168.1.1 and the rest of my home network at 192.168.1.xxx; because I had read on a forum that having the modem on a different subnet prevented potential routing problems. When I pointed my web browser to 192.168.0.1 - it would just timeout (I kind of expected that).
Now (willing to try anything), I have my DSL Modem's LAN IP at 192.168.0.2 and my DIR-655 at 192.168.0.1 and the rest of my home network at 192.168.0.xxx (DHCP range is set to assign hosts from 64 to 254). When I point my web browser to 192.168.0.2 - it still just times out.
The DSL Modem is setup in transparent bridge mode. And everything else is working well with the home network.
How can I get the DIR-655 to pass/route my http connection to the DSL modem?
i just bought a sony lcd tv and this model can be controlled by a smartphone via an app called mediaremote. The app should scan the local network and find the tv and than, after pairing, you can use the smartphone as remote controller over Wi-Fi.
My problem is that the router block the network scan and the app can't find the tv; is there somethig i can chack in the configuration or that else to permit the local network scan?
I tried to connect tv and smartphone to the neighbour wifi and the app woks perfect so i'm sure that is a my network problem.
I'm experiencing dropping connection and can't play online games because of extreme lag. when pinging certain sites here is the results at the bottom. so very extremely high ping. then after a while like 5 mins, when i hover my mouse cursor at the network icon it says limited access and i don't have any internet connection, even powercycling doesn't work. it stays like that. when using direct connection to the modem only it works fine. but when using the wrt120n router i experience that problem either wired or wireless it stays the same. My firmware is latest, router settings default.
View 5 Replies View Related
