I have a dell 2155CDN network printer I want to scan files over the network when I scan once it finishes I get a SMB List error and the file does not go trough here is a picture of my settings?
View 4 RepliesI have a Dell 2155CDN Multifunction printer that is hooked up through our network. But when using the scan feature, it is terribly slow, and I assume it has something to do with it scanning through the network port. Is it possible to leave the printer hooked up across the network, but also attach it to a computer via USB just for the scanner? Or would doing this confuse the printer not knowing which port to use for each feature?
View 2 Replies View RelatedI can print from hp printer photosmart c6280 but cannot scan its on network
View 1 Replies View RelatedI have an Canon MP 530 that works great for my home office network, but right now it's being shared off one of my PCs. I would like to network it like my HP LaserJet P2055dn, but not just printing, also fax and scan (via Adobe Acrobat Pro). Does this product really exist.
About two years ago I bought a Linksys device that turned out to be a $100 mistake, but now I'm really needing this sharing functionality.
i have a problem with my small office network. the issue is i have 2 public ip address that was configured in 2 (devices) dlink router and linksys cisco wireless router.
with individual static ip address:
1st router connected to dlink switch (smartweb) and 2nd wireless router is only for the admin user.
how can i able to share a files / printer with these 2 network device?
do i have to have a separate connection from the printer to the laptop. i only have one connection into power board.
View 1 Replies View RelatedConnected our Brother MFC-8820D printer/scanner/fax directly to one of the 4 Ethernet ports on the back of the DIR-655 in our new install with this router, and all computers can print to it, whether connected via an Ethernet cable or via wireless, but none of the printers can scan. We just get an error message. Scanner driver is installed on all computers. Same printer worked fine via Ethernet on a Windows small business server for printing and scanning. Windows server no longer used or connected. Only DIR-655 as we are dumbing down and getting rid of our Windows server and have gone to a NAS solution connected to the DIR-655.
What can we do to make the scanning work on our Multifunction printer?
Just finished the setup for Canon MP780 USB printer to work with EA4500. Printer goes online only while it prints the pages. When I try to scan the document with MP Navigator it cannot communicate with the scanner as printer is essentially offline. How to setup the printer in order to perform the scan of the documents?
View 2 Replies View RelatedI have studio 1737, With my Intel WiFi 5100 AGN. I also instaslled latest drivers but when i want to scan for any wireless network it says adapter not found.
View 22 Replies View RelatedI am having issues connecting my 1320c directly to the network. It is currently hooked directly to my netgear WNDR4000 router through a ethernet cable, but I am unable to see the printer on my devices list on the router.The printer connects fine and prints when hooked directly to my computer through USB,what needs to be done to be able to see my printer and be able to print with it on the network?
View 2 Replies View RelatedI just got a new Inspiron. I have wireless INTERNET NO PROBLEM, and I downloaded the driver ware for the DELL V715W.The two wont talk and I cant get it to print at all or complete the printer test page spool.
View 1 Replies View RelatedI have downloaded the installation data "R147095 Dell Wireless Printer Adaptor 3300 Installation Set-UP.exe". Saved that to a new CD and loaded it to my PC. I get through most of the setup wizard but always fail at the same point - The adapter will not connect to the network. All the usual checks are positive and the network key is correct and in the appropriate case. I have run Driver Detective and that confirms that the drivers for the adapter are up to date. The printer is not yet installed on the PC and the software for it has not been loaded.
I have tried this procedure again on a second PC where the printer had been used as a wired slave printer but have uninstalled the printer first. Same result - Adapter fails to connect to the network.
Router is a Billion Bipac 7800 n. I can get other "newer" devices to connect without problems but this "old" adaptor is proving stubborn.
We've got two computers in the Homegroup on our network -- call them computers A and B. Computer A (info below) is running Windows 7 Professional, Computer B is running Windows 7 Home Premium. Computer A has an ethernet cable to the router, Computer B is connecting via WiFi.
The problem is: Computer A can access files and the printer on Computer B, but Computer B cannot access Computer A. When I'm on B and attempt to add A's printer, I get a message that:
"file and print sharing device A is online but isn't responding to connection attempts"
In the HomeGroup window on A, all sharing options (pictures, documents, music, printers, videos) are checked.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz, Intel64 Family 6 Model 15
[Code]......
the setup is as follow: I have two separate network.192.168.90.xx and 10.10.xx.xx the two boxes being connected via an ethernet cable. How would I go about having a 192.(...) machine speak to a 10.(...) box? My boss tells me that via a UDP call the 192.(...) machine can get the IP of a 10.(...) box. Isn't UDP dependant on a subnet mask to limit the # of queries, and in that case would it even be feasable? I was thinking instead of spoofing the 192.(...) IP to an unoccupied 10.(...) IP. Of course to do this would require knowing what IPs are unoccupied on the other network, and I cannot assume the would respond to pings.
View 5 Replies View RelatedI am trying to use Nmap to determine whether a certain IP address is available or not. However, the output of the scan shows that it scanned the subnet my computer is on and only one address in the network I typed in (MPLS network). Is there any way I can have Nmap only scan that one subnet and not all the others?
View 5 Replies View Relatedcant scan through network with xerox docucentre iv 2260
View 3 Replies View RelatedI'm running Windows 7 Pro. I noticed tonight when I clicked on Network in Windows Explorer that in addition to my home PCs there is a PC with someone's name on it. My suspicion is that my wireless ISP has screwed up in some way. I ran SoftPerfect's Network Scanner and don't see any strange IP addresses, so this stranger's PC is not on my subnet. What tools are available to scan my network and give me more info about the stranger's PC?
View 6 Replies View RelatedAnyway, I am looking for a way to discover host names of Apple devices (namely iPods and iPhones) that are on our network. I've tried a number of programs like Nmap, Advanced IP Scanner, and LanSpy to name a few. All of them will report back the MAC address with no problem but no dice on resolving the host name.
My goal is to use the host name to identify the device, and ultimately the person with the device. Any thoughts on how I can go about this? Is there a setting in Nmap I'm missing or perhaps a better program to use?
i just bought a sony lcd tv and this model can be controlled by a smartphone via an app called mediaremote. The app should scan the local network and find the tv and than, after pairing, you can use the smartphone as remote controller over Wi-Fi.
My problem is that the router block the network scan and the app can't find the tv; is there somethig i can chack in the configuration or that else to permit the local network scan?
I tried to connect tv and smartphone to the neighbour wifi and the app woks perfect so i'm sure that is a my network problem.
I have 2 desktops (running windows 7), a Canon MF8300 printer, and an outgoing ethernet line, all on a Netgear Advanced Cable Modem Gateway CGD24-CPR. I'm only concerned with having the 2 desktops set up with the Canon printer.Both computers have been connected to the printer before and I have the startup disk. But once the new offices were set up and both of the desktops were moved, I can no longer access or find the printer.
I can IPconfig the Desktops for their IPV4 addresses and both desktops recognize eachother on a Homegroup, but I can't find the printer. I printed off the print configuration page from the printer which gave me an IP address (printer is set for auto-obtain), but using an IP search won't bring up the printer.All of the devices are plugged into ethernet ports set up for the three different office they are in and the actual location of the Netgear cable modem/router is over 100 feet away. My primary concern is getting the printer for the desktops, but I also need to add a wireless router into one of those office in the future.
I have problem with Bluetooth on my Inspiron 7520. I can connect my mobile phone and my laptop together with Bluetooth, but when I try to send a file from laptop to mobile phone, I get error that sending is not possible.
I see in my Device Manager this: Generic Bluetooth Adapter, Microsoft Bluetooth Enumerator and then 2 unknown Bluetooth devices. I guess I have wrong drivers, but there are so many drivers in download section for Inspiron 7520, that I don§t know which one to use. My OS is W7.
I need a software that i can use to transfer files from one windows PC to another over the LAN network.I've tried "Quick'n Easy FTP server Lite" and it works, but its really slow (About 2MB/s) ( i know my hardware can go much faster than the software is allowing). But at least the speeds were constant and unchangingI have also tried Windows Easy Transfer. But that software makes it a bit harder to send back and for whenever i feel like it, and although sometime i would hit speeds 5 times faster than with the previously mentioned software (about 12MB/s) , those speeds were not constant. It would be slow (around 1MB/s) and then spike up, and then go back down, and repeat in that fashion
View 8 Replies View RelatedSet up Dell 310 wireless printer to Fedora 16 OS
View 1 Replies View RelatedI'm going to piggyback this thread since it pretty much describes my situation (Dell laptop Windows XP Professional). I had a pc, a laptop, and a wireless printer all working properly together. Printer stopped working for some reason. The solution at which I arrived was to remove the existing printer profile and add it fresh. That worked for the pc but not for the laptop. The laptop doesn't see it.
View 5 Replies View RelatedTrying to add HP desktop with Vista to my network of Dell 4700 desktop with XP and Dell 962 printer. Printer software starts to load but stops about 2/3 through the first disc. I think I have everything set up to share the printer. I tried to print a test from Notepad. It did everything up to printing the sample and stopped.
View 4 Replies View RelatedAfter purchasing another dell XPS since my first one went bad, I noticed I can no longer print wireless to my canon xp860 printer. It worked fine with the old computer although I was using an external Blue tooth plug in. This nre laptop has builtin Blue tooth. I have tried to reinstall the printer for wireless and it seems to be install but it just wont print. My thought is to just give up and buy another plug in for the laptop. The device mgr. shows a good install too.
View 1 Replies View RelatedI have a Dell AIO 968w. I've tried connecting it via the USB that came with the printer and a new one incase the old one broke as everytime I connected it it gave the message. USB malfunctioned please replace device. Later I connected it via Ethernet to my Linksys switch, but my computer wouldn't recognize the printer nor the IP connected. I've tried manually imputing the IP, but no luck.
View 6 Replies View RelatedPrint I have an IPAD and a Dell V715W printer. To print from the IPAD the printer has to be "Air Print" enabled. I cannot determine if the printer is air print enabled.
View 4 Replies View RelatedMy V715w printer works on USB. How do I get it setup as wireless? I have followed all the suggestions in the book, my network works super for both my computers, but it won't recognize the printer will not recognize my network?
View 1 Replies View RelatedI have had this printer for a while now and I was using it with a Aciontec DSL wifi modem. It connected just fine without any problems via the installation software and a usb cable to initalize. I just swtiched from DSL to a Cable setup. I am using a Motorola "surfboard" SBG901 with built in wifi. It came pre installed with a WPA PSK string. Every time I have tried to connect it would not accept the WPA PSK string and being a legit 8 -63 charcters. I messed around witht he Cable modem settings and eventually decided to turn off all proection for a second to see if I could connect. Sure enough I was able to connect. In my Cable modem settings I have WPA/WPA PSK/WPA 2/WPA2 PSK . When you select either WPA or WPA2 it greys out the WPA PSK and WPA2 PSK selections and vice versa. I am using WPA PSK currently. I tried to switch to WPA but the passcode section was greyed out and had some "radius key section". I am not too familar with network settings just the basics. I used the Dell Wireless connection utility and tried setting up a manual connection by putting in the ssid and what type of protection but it still would not accept the passcode as being a WPA.
View 13 Replies View RelatedWiFi-N or WiFi-B/G I have a Dell P513w Inkjet Printer and am upgrading my printer firmware to the latest release. How do I determine if I use firmware version WiFi-N or WiFi-B/G when updating? Whether or not this is the level that I should use, my current firmaware level is "C" (WiFi-N). If I am to use WiFi-B/G how do I change firmware levels?
Using Windows 7 64-bit
Had to change my wireless box and now my wireless Dell V505 cannot communicate with the new box. Unable to print.
View 1 Replies View RelatedI recently got new internet service and now my wireless printer and laptop are not communicating. I think I need the wire to plug into the laptop + printer, but I lost it.
Printer: Dell V715W