Trying to add HP desktop with Vista to my network of Dell 4700 desktop with XP and Dell 962 printer. Printer software starts to load but stops about 2/3 through the first disc. I think I have everything set up to share the printer. I tried to print a test from Notepad. It did everything up to printing the sample and stopped.
View 4 Replies
I bought a new printer HP Photosmart 5510 all-in-one printer. I have it connected to a machine running MS Vista and it works there with no problems at all.The printer even prints from my machine running Windows 7 with no roblems whatsoever.The issue is with my machine running MS XP. It loads fine on the XP workstation, but I can't even to recognize the device and the installation scripts are terminated.
View 1 Replies View RelatedI have an inspiron, with an Intel Centrioun Wireless-N 1030, that I purchased new just two months ago. I just recently starting having trouble with the wireless internet connection. I am able to connect 95% of the time, but then I cannot load one page. Occasionally, it will speed up and I have a good connection for a few minutes, but then I lose it again. It happens on battery or cord, with two different networks (one large school network and my home network). It doesn't happen if I am on a land/wired connection. The two other computers in my house, two and four years old, are having no trouble with the wireless connections. I have been using the current modem at my house since i bought the computer. Today, we reset the modem to factory settings, with no change. We also did several ping tests and had a 9% failure rate pinging th modem. I have also changed it to run at max power all the time and disabled the option to turn off when lower power, with no change. I have also attempted to update the driver through the device manager.
View 10 Replies View RelatedI have an Inspiron E1705 and my wireless card/adapter takes about 3 minutes to load each log in. I called Dell, and they couldn't find out what was wrong. We tried things from internet settings, to shutting off all the start ups in MS Config. I've had this problem for a very long time. Windows will start up, and it seems like there is a 3 minute wait period of my computer doing nothing, and then finally, the wireless loads in my System Tray.
View 14 Replies View RelatedSet up Dell 310 wireless printer to Fedora 16 OS
View 1 Replies View RelatedI'm going to piggyback this thread since it pretty much describes my situation (Dell laptop Windows XP Professional). I had a pc, a laptop, and a wireless printer all working properly together. Printer stopped working for some reason. The solution at which I arrived was to remove the existing printer profile and add it fresh. That worked for the pc but not for the laptop. The laptop doesn't see it.
View 5 Replies View RelatedAfter purchasing another dell XPS since my first one went bad, I noticed I can no longer print wireless to my canon xp860 printer. It worked fine with the old computer although I was using an external Blue tooth plug in. This nre laptop has builtin Blue tooth. I have tried to reinstall the printer for wireless and it seems to be install but it just wont print. My thought is to just give up and buy another plug in for the laptop. The device mgr. shows a good install too.
View 1 Replies View RelatedI have a Dell AIO 968w. I've tried connecting it via the USB that came with the printer and a new one incase the old one broke as everytime I connected it it gave the message. USB malfunctioned please replace device. Later I connected it via Ethernet to my Linksys switch, but my computer wouldn't recognize the printer nor the IP connected. I've tried manually imputing the IP, but no luck.
View 6 Replies View RelatedI am having issues connecting my 1320c directly to the network. It is currently hooked directly to my netgear WNDR4000 router through a ethernet cable, but I am unable to see the printer on my devices list on the router.The printer connects fine and prints when hooked directly to my computer through USB,what needs to be done to be able to see my printer and be able to print with it on the network?
View 2 Replies View RelatedPrint I have an IPAD and a Dell V715W printer. To print from the IPAD the printer has to be "Air Print" enabled. I cannot determine if the printer is air print enabled.
View 4 Replies View RelatedMy V715w printer works on USB. How do I get it setup as wireless? I have followed all the suggestions in the book, my network works super for both my computers, but it won't recognize the printer will not recognize my network?
View 1 Replies View RelatedI have had this printer for a while now and I was using it with a Aciontec DSL wifi modem. It connected just fine without any problems via the installation software and a usb cable to initalize. I just swtiched from DSL to a Cable setup. I am using a Motorola "surfboard" SBG901 with built in wifi. It came pre installed with a WPA PSK string. Every time I have tried to connect it would not accept the WPA PSK string and being a legit 8 -63 charcters. I messed around witht he Cable modem settings and eventually decided to turn off all proection for a second to see if I could connect. Sure enough I was able to connect. In my Cable modem settings I have WPA/WPA PSK/WPA 2/WPA2 PSK . When you select either WPA or WPA2 it greys out the WPA PSK and WPA2 PSK selections and vice versa. I am using WPA PSK currently. I tried to switch to WPA but the passcode section was greyed out and had some "radius key section". I am not too familar with network settings just the basics. I used the Dell Wireless connection utility and tried setting up a manual connection by putting in the ssid and what type of protection but it still would not accept the passcode as being a WPA.
View 13 Replies View RelatedWiFi-N or WiFi-B/G I have a Dell P513w Inkjet Printer and am upgrading my printer firmware to the latest release. How do I determine if I use firmware version WiFi-N or WiFi-B/G when updating? Whether or not this is the level that I should use, my current firmaware level is "C" (WiFi-N). If I am to use WiFi-B/G how do I change firmware levels?
Using Windows 7 64-bit
Had to change my wireless box and now my wireless Dell V505 cannot communicate with the new box. Unable to print.
View 1 Replies View RelatedI recently got new internet service and now my wireless printer and laptop are not communicating. I think I need the wire to plug into the laptop + printer, but I lost it.
Printer: Dell V715W
I switch to a new internet provider. which is wireless[Frontier]. my printer is dell V715w the orange light is flashing. provide detailed info to correct
View 1 Replies View RelatedI have a Dell Inspiron E1505 running windows xp. Also an HP Photosmart C6180 wireless printer. This happens every time I move. I get the computer on the network and the printer on the network but they don't talk. I can't ping the printer and I can't bring up the embedded web browser. I can print the network config page from the printer but can't print a test page from the computer.I've disabled my firewall. That hasn't worked. I've tried creating a port especially for that ip address. However I don't have the disk for the printer and when I had to select my product, it only showed the C6100 series BT. I don't know what BT means but I selected that. I don't know what that means but it still won't print. The printer shows up in my printer and faxes menu but when I ran the HP print diagnostic utility no printers were displayed.
View 1 Replies View RelatedI have a dell 2155CDN network printer I want to scan files over the network when I scan once it finishes I get a SMB List error and the file does not go trough here is a picture of my settings?
View 4 Replies View RelatedI bought a Dell V525w printer. Once I set it up, my computers can no longer access the internet! I have looked everywhere and cannot find an answer. The only way I can make the internet work again is to power down the printer, and reset the router. But, as soon as I turn the printer on, the internet conenction is lost again. This is very frustrating. I need to know how to fix this as soon as possible.I have a Netgear WNDR3700v3 wireless router. My computer is an Alienware X51.
View 1 Replies View RelatedJust purchased Pixma 5350 printer. Laptop will not connect via WiFi. Printer is connected to router via WiFi,laptop is connected to router via WiFi but not to each other. Printer works perfectly when connected to laptop via USB cable. Have un-installed and re-installed several times but cannot get the two to connect to each other.
View 6 Replies View RelatedI have a Dell 2155CDN Multifunction printer that is hooked up through our network. But when using the scan feature, it is terribly slow, and I assume it has something to do with it scanning through the network port. Is it possible to leave the printer hooked up across the network, but also attach it to a computer via USB just for the scanner? Or would doing this confuse the printer not knowing which port to use for each feature?
View 2 Replies View RelatedI just got a new Inspiron. I have wireless INTERNET NO PROBLEM, and I downloaded the driver ware for the DELL V715W.The two wont talk and I cant get it to print at all or complete the printer test page spool.
View 1 Replies View RelatedI have downloaded the installation data "R147095 Dell Wireless Printer Adaptor 3300 Installation Set-UP.exe". Saved that to a new CD and loaded it to my PC. I get through most of the setup wizard but always fail at the same point - The adapter will not connect to the network. All the usual checks are positive and the network key is correct and in the appropriate case. I have run Driver Detective and that confirms that the drivers for the adapter are up to date. The printer is not yet installed on the PC and the software for it has not been loaded.
I have tried this procedure again on a second PC where the printer had been used as a wired slave printer but have uninstalled the printer first. Same result - Adapter fails to connect to the network.
Router is a Billion Bipac 7800 n. I can get other "newer" devices to connect without problems but this "old" adaptor is proving stubborn.
I have a 2 year old v305w printer i want to use with my new imac and ipad. Its perfectly good and dont want to throw it out. Are there drivers available to make this compatible with air print on my ipad and imac?
View 2 Replies View Relatedhow to change the IP Address on a Dell C3760dn Color Laser Printer?
View 4 Replies View RelatedTrying to print from a Dimension E521 using Dell AIO Center to a hard-wired networked 962 printer hosted on an Inspirion 530 using a LinkSys WRT54G V8 router. Cannot scan or fax from the Dimension via the network. During software install, the printer is not automatically detected on the network and it has to be manually assigned. Attempt to print test page via the network during software install results in a document in the print queue that hangs the printer with a print error. After the aborted test page, nothing works.
Using the VISTA Control Panel can successfully set up the printer and can print a test page to it. In this case, the printer install CAN see the printer on the network, so I don't think it is a network issue.
However, if the control panel is used to install the printer, the AIO center cannot find it at all and displays an error that software and drivers are not installed. Yes, Network and Sharing are all set up correctly and, no, the Firewall is not the problem as it is turned off on both machines.
Drivers are not the issue. I have deleted the drivers and reinstalled them so many times in the last week I can do it in my sleep.
I have a Dell desktop and a dell laptop. I got a new belkin n300 F9K1002v1 Router today and now I can't print to my dell 968 aio printer from my laptop. the printer is connected to the desktop with a usb cord and was working with the old router?this info is from my laptop:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft� Windows Vista� Home Premium , Service Pack 2, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3061 Mb
Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 448 Mb
Hard Drives: C: Total - 225874 MB, Free - 126104 MB; D: Total - 9999 MB, Free - 5832 MB;
Motherboard: Dell Inc., 0U990C, , .DHF4PF1.CN7016686601RZ.
Antivirus: Lavasoft Ad-Watch Live! Anti-Virus, Updated and Enabled
I am trying to access the settings webapge so that I can delete computers from the scan list. When I select the settings link it attempts to open the page but then the lights on the adapter start to flash and it seems to lose the connection with it ....... The other links e.g. status, information and security seem to work OK provided they are aceessed before I select the settings link. One the lights have started to flash I have to switch off the adapter and switch back to restore the connection to the network. The adapter is connected to a BTHomehub. Other than this issue the printer works fine through the network.
View 15 Replies View RelatedI have a new inspiron 15 laptop and also bought an all in one wireless printer. I have a iinet BOB lite modem. I cannot for the life of me figure out how to get the wireless printer, modem and laptop to tall to one another. Am I missing something or should it all work? The laptop has internet access. The laptop also shows the printer installed with a big green tick next to it but it says it is offline. At no point has a green light appeared on the printer to indicate any wireless connectivity to the modem.
View 2 Replies View RelatedI have just bought a v313w printer & cannot get it to connect wireless to my inspirion 1545 laptop (windows 7)During the wireless set-up, it gets to the third of the five stages ok. These are configuring printer, resetting printer & connecting to wireless network. It fails on Acquiring network address & communicating with the printer!
I have tried the following without any luck, uninstalling & re-installing, powering down cable modem/router, changing security settings on router from 64bit wep to 128 wep & WPA/PSK, dell expert taking control of my laptop & trying to connect (which resulted in Dell sending me a new printer because the expert seemed to think it maybe a faulty wireless card in the printer, this is not the case becuase the same problem occurs with the second printer dell have sent me!). I have downloaded & installed the latest drivers for this printer from the dell website & I've switched off my security (anti virus/firewall) when trying to install.
I am completely stuck as to what to try next, the printer works perfectly fine from the USB cable.
I just recently learned that my Kodak ESP5250 printer needs to be installed with the Wi-Fi in my Windows 7 Ultimate SP1. How do I activate the Wi-Fi installed in my Dell Inspiron 7100?
View 1 Replies View RelatedI have 2 desktops (running windows 7), a Canon MF8300 printer, and an outgoing ethernet line, all on a Netgear Advanced Cable Modem Gateway CGD24-CPR. I'm only concerned with having the 2 desktops set up with the Canon printer.Both computers have been connected to the printer before and I have the startup disk. But once the new offices were set up and both of the desktops were moved, I can no longer access or find the printer.
I can IPconfig the Desktops for their IPV4 addresses and both desktops recognize eachother on a Homegroup, but I can't find the printer. I printed off the print configuration page from the printer which gave me an IP address (printer is set for auto-obtain), but using an IP search won't bring up the printer.All of the devices are plugged into ethernet ports set up for the three different office they are in and the actual location of the Netgear cable modem/router is over 100 feet away. My primary concern is getting the printer for the desktops, but I also need to add a wireless router into one of those office in the future.
I used WPS on my DIR-655 Rev B1 FW 2.03NA to register a Brother HL-2270DW Wifi laser printer and my Mac can never wake it up to print. It always works fine from all my Windows machines.It appears as xxx.xxx.xxx.6 on my network. But the router only shows its IP as 0.0.0.0 on the STATUSWireless page and I can't find any way to change that. My assumption is that the Mac can't find it because of this, but I'm not an expert on WPS.Maybe I should take it out of WPS and just assign it a fixed IP using DHCP Reservation. Or is there another fix? I haven't ruled out the Brother OS X printer driver, but it and the printer's firmware are both up to date.Two odd things:
1. I can ping the printer from my PCs but the Mac can't find see in and it's not a Firewall issue.
2. I can see the brother printer in Finder's Shared devices: so it sees it but refuses to interact.
