Dell 2155CDN - Hooking Up Multifunction Printer Via Network And USB
Sep 27, 2012
I have a Dell 2155CDN Multifunction printer that is hooked up through our network. But when using the scan feature, it is terribly slow, and I assume it has something to do with it scanning through the network port. Is it possible to leave the printer hooked up across the network, but also attach it to a computer via USB just for the scanner? Or would doing this confuse the printer not knowing which port to use for each feature?
View 2 Replies
ADVERTISEMENT
Jan 7, 2013
I have a dell 2155CDN network printer I want to scan files over the network when I scan once it finishes I get a SMB List error and the file does not go trough here is a picture of my settings?
View 4 Replies
View Related
Mar 11, 2011
Connected our Brother MFC-8820D printer/scanner/fax directly to one of the 4 Ethernet ports on the back of the DIR-655 in our new install with this router, and all computers can print to it, whether connected via an Ethernet cable or via wireless, but none of the printers can scan. We just get an error message. Scanner driver is installed on all computers. Same printer worked fine via Ethernet on a Windows small business server for printing and scanning. Windows server no longer used or connected. Only DIR-655 as we are dumbing down and getting rid of our Windows server and have gone to a NAS solution connected to the DIR-655.
What can we do to make the scanning work on our Multifunction printer?
View 12 Replies
View Related
Jan 26, 2012
I am having issues connecting my 1320c directly to the network. It is currently hooked directly to my netgear WNDR4000 router through a ethernet cable, but I am unable to see the printer on my devices list on the router.The printer connects fine and prints when hooked directly to my computer through USB,what needs to be done to be able to see my printer and be able to print with it on the network?
View 2 Replies
View Related
Dec 16, 2012
I just got a new Inspiron. I have wireless INTERNET NO PROBLEM, and I downloaded the driver ware for the DELL V715W.The two wont talk and I cant get it to print at all or complete the printer test page spool.
View 1 Replies
View Related
Aug 31, 2012
I have downloaded the installation data "R147095 Dell Wireless Printer Adaptor 3300 Installation Set-UP.exe". Saved that to a new CD and loaded it to my PC. I get through most of the setup wizard but always fail at the same point - The adapter will not connect to the network. All the usual checks are positive and the network key is correct and in the appropriate case. I have run Driver Detective and that confirms that the drivers for the adapter are up to date. The printer is not yet installed on the PC and the software for it has not been loaded.
I have tried this procedure again on a second PC where the printer had been used as a wired slave printer but have uninstalled the printer first. Same result - Adapter fails to connect to the network.
Router is a Billion Bipac 7800 n. I can get other "newer" devices to connect without problems but this "old" adaptor is proving stubborn.
View 1 Replies
View Related
Sep 29, 2012
I'm looking for a router that can be a router, repeater, or an access point and has gigabit ports. I've found the Asus RT-N15U, but they only seem to be outside the US?
View 1 Replies
View Related
Jun 5, 2012
I am trying to download firmware for an RV180W Wireless-N Multifunction VPN Firewall Router. I found updates for a 110 in BIN format (router only updates from IMG). Currently running stock firmware on that router and need the update.
View 2 Replies
View Related
Mar 21, 2011
I have 2 desktops (running windows 7), a Canon MF8300 printer, and an outgoing ethernet line, all on a Netgear Advanced Cable Modem Gateway CGD24-CPR. I'm only concerned with having the 2 desktops set up with the Canon printer.Both computers have been connected to the printer before and I have the startup disk. But once the new offices were set up and both of the desktops were moved, I can no longer access or find the printer.
I can IPconfig the Desktops for their IPV4 addresses and both desktops recognize eachother on a Homegroup, but I can't find the printer. I printed off the print configuration page from the printer which gave me an IP address (printer is set for auto-obtain), but using an IP search won't bring up the printer.All of the devices are plugged into ethernet ports set up for the three different office they are in and the actual location of the Netgear cable modem/router is over 100 feet away. My primary concern is getting the printer for the desktops, but I also need to add a wireless router into one of those office in the future.
View 15 Replies
View Related
Dec 22, 2011
If I hook up 2 desktop towers together will it give me more hd and ram space? I want to know this because my boyfriend says we can do this to add more space to the existing tower. I have an older computer that I am running World of Warcraft on and I don't think I can add the 2 expansions I need to it because of the hd and ram space it takes up. I have 15.1 gb of hd space left and a total of 1 gb of ram which it is using to run the 2 I have
View 2 Replies
View Related
Feb 3, 2011
It's a bit of a dinosaur, but is it possible to hook it up using LAN to connect to my router?
View 19 Replies
View Related
Nov 15, 2011
I have CAT5 cables run throughout my house to a few different jacks. They plug into my modem downstairs. I want to hook up my desktop internet through one of the wall jacks upstairs. The wall jack has CAT5 cable run to it but only accepts telephone wire sized jacks. How do I connect to the internet with this setup?
View 14 Replies
View Related
Oct 11, 2012
We have a wireless access point for our office, encrypted. Is it possible to hook up another wireless access point that would access the internet, but not our local network for public use?
View 1 Replies
View Related
Feb 27, 2012
setting two network, I try but the other other network is so slow and a lot of time will not connect to the net
View 1 Replies
View Related
Feb 27, 2013
I thought i would try to hoom up my laptop to my home computer connection. i plug in the ethernet cable, but when i try to connect to broadband, it asks for a username and password. what username and password?
View 1 Replies
View Related
May 3, 2011
How do i use my wireless laptop to hook up my non-wireless desktop, to the internet using a linksys DSL router (non-wireless)
View 1 Replies
View Related
Mar 16, 2012
What do I need and and what ports etc. do I put them in?
View 1 Replies
View Related
May 2, 2013
Previous setup without problems B1 Firmware 2.00
Cable modem>Router>4 computers + 1 wireless printer.. But i needed more ports so i bought a trendnet gigabit switch with 8 ports.
Then I Plugged port 4 on router to >switch port 1
When all the computers are turned on and using everything at once i cant access websites but my skype works so i figure its probably a dns issue and my dlink is overloaded? I didnt try to access any sites with the ip only fail on my part.
Once this happened i immediately unplugged everything and restarted the router. I only have my own computer hooked up the router and did a firmware upgrade to 2.10na and my internet works immediately after but when i hook up another comptuer to the network i cant access any pages but my skype works..
View 14 Replies
View Related
Aug 3, 2012
I just bought a used Acer Aspire One 10.1 netbook and I am having some issues. When I got it the pc needed 17 windows updates done. So I did that but I am not sure all the updates worked properly as the machine shut down but never rebooted after finishing updates. After I turned it back on I tried to connect to the internet through my wireless router (which is working fine for other devices), nothing. So I tried a wired connection, nothing again. The wireless is finding my router it is just not hooking up to the internet. I tried ipconfig/all in the cmd prompt and all it shows is that the media is disconnected??? Does anyone have any ideas as to what is going on? The compute seems to be functioning fine except for the internet.
View 3 Replies
View Related
Feb 4, 2013
i hooked up a netgear repeater to my belkin n450db router and it shows a good connection betw router and extender and between extender and device (laptop and tv) however only a lan connection - no internet.
View 1 Replies
View Related
Feb 11, 2013
I am new to dealing with domain setups and Windows Server. Here is my setup:
Comcast business cable modem
Gigabit Switch
IBM x3100 M4 w/Xeon E3 1230, 16GB ECC DDR3 RAM Running SBS 2011 Standard
Custom PC with Win7 Pro, i7 3770, 12GB DDR3 RAM
What I would like to do is setup sbs 2011 as the domain controller and have the custom pc on that domain.Comcast business cable modem/router is set for defaults, handing out dhcp.
Both Server and custom pc are hooked into the switch which is hooked into the comcast router.SBS 2011 I believe I set it up with the default settings. Updated it so all the patches are on it. It sees the comcast router and connects to the internet no problem.
Custom PC is sees the comcast router no problem and gets its ip address from there like normal.When trying to join the domain on the sbs computer the custom computer cannot find it even though I can ping the server.
View 13 Replies
View Related
Jan 13, 2012
Set up Dell 310 wireless printer to Fedora 16 OS
View 1 Replies
View Related
Dec 7, 2011
I'm going to piggyback this thread since it pretty much describes my situation (Dell laptop Windows XP Professional). I had a pc, a laptop, and a wireless printer all working properly together. Printer stopped working for some reason. The solution at which I arrived was to remove the existing printer profile and add it fresh. That worked for the pc but not for the laptop. The laptop doesn't see it.
View 5 Replies
View Related
Mar 29, 2011
Trying to add HP desktop with Vista to my network of Dell 4700 desktop with XP and Dell 962 printer. Printer software starts to load but stops about 2/3 through the first disc. I think I have everything set up to share the printer. I tried to print a test from Notepad. It did everything up to printing the sample and stopped.
View 4 Replies
View Related
Aug 25, 2012
After purchasing another dell XPS since my first one went bad, I noticed I can no longer print wireless to my canon xp860 printer. It worked fine with the old computer although I was using an external Blue tooth plug in. This nre laptop has builtin Blue tooth. I have tried to reinstall the printer for wireless and it seems to be install but it just wont print. My thought is to just give up and buy another plug in for the laptop. The device mgr. shows a good install too.
View 1 Replies
View Related
Oct 1, 2011
I have a Dell AIO 968w. I've tried connecting it via the USB that came with the printer and a new one incase the old one broke as everytime I connected it it gave the message. USB malfunctioned please replace device. Later I connected it via Ethernet to my Linksys switch, but my computer wouldn't recognize the printer nor the IP connected. I've tried manually imputing the IP, but no luck.
View 6 Replies
View Related
Jun 16, 2011
Print I have an IPAD and a Dell V715W printer. To print from the IPAD the printer has to be "Air Print" enabled. I cannot determine if the printer is air print enabled.
View 4 Replies
View Related
Oct 14, 2011
My V715w printer works on USB. How do I get it setup as wireless? I have followed all the suggestions in the book, my network works super for both my computers, but it won't recognize the printer will not recognize my network?
View 1 Replies
View Related
Jan 13, 2010
I have had this printer for a while now and I was using it with a Aciontec DSL wifi modem. It connected just fine without any problems via the installation software and a usb cable to initalize. I just swtiched from DSL to a Cable setup. I am using a Motorola "surfboard" SBG901 with built in wifi. It came pre installed with a WPA PSK string. Every time I have tried to connect it would not accept the WPA PSK string and being a legit 8 -63 charcters. I messed around witht he Cable modem settings and eventually decided to turn off all proection for a second to see if I could connect. Sure enough I was able to connect. In my Cable modem settings I have WPA/WPA PSK/WPA 2/WPA2 PSK . When you select either WPA or WPA2 it greys out the WPA PSK and WPA2 PSK selections and vice versa. I am using WPA PSK currently. I tried to switch to WPA but the passcode section was greyed out and had some "radius key section". I am not too familar with network settings just the basics. I used the Dell Wireless connection utility and tried setting up a manual connection by putting in the ssid and what type of protection but it still would not accept the passcode as being a WPA.
View 13 Replies
View Related
Nov 17, 2011
WiFi-N or WiFi-B/G I have a Dell P513w Inkjet Printer and am upgrading my printer firmware to the latest release. How do I determine if I use firmware version WiFi-N or WiFi-B/G when updating? Whether or not this is the level that I should use, my current firmaware level is "C" (WiFi-N). If I am to use WiFi-B/G how do I change firmware levels?
Using Windows 7 64-bit
View 1 Replies
View Related
Dec 16, 2012
Had to change my wireless box and now my wireless Dell V505 cannot communicate with the new box. Unable to print.
View 1 Replies
View Related
Mar 28, 2013
I recently got new internet service and now my wireless printer and laptop are not communicating. I think I need the wire to plug into the laptop + printer, but I lost it.
Printer: Dell V715W
View 1 Replies
View Related
Feb 22, 2011
I switch to a new internet provider. which is wireless[Frontier]. my printer is dell V715w the orange light is flashing. provide detailed info to correct
View 1 Replies
View Related
