Linksys Wireless Router :: UPnP Not Responding With WRT54GL
Feb 23, 2012
I have a wireless router and I'm trying to user UPnP feature. of course it is enble in the router.
It's working one and after it stop working, looks like the router is not responding anymore. If I got on the web interface of the router, I loging, on the first web page I press save changes, even if I didn't change anything, the UPnP feature work again.
Looks like a timeout occure or something like that. Is there a way to wake up the router without having to go on the web interface? Why it's stop working?
Firmware Version: v4.30.15
View 1 Replies
ADVERTISEMENT
Jan 24, 2013
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820 Rel.73549n
ISP : Cable TV provider
It seems there is a bug with TL-WDR3600. As it can be seen in the following image, the UPnP is off:But my firewall on the computer is reporting flood of packets originating from the router (it's the routers MAC address and IP address):I don't know what ETH type packet is, 0026 might be hex (38 decimal as seen in the raw log). But port 1900 is definitely UPnP.At the router, the wireless switch is off, as well as all other options for sharing etc. This computer is the only one connected to the router. The router has been reset several times.
View 1 Replies
View Related
Nov 26, 2011
I just set up the x2000 at my home Everything seems to be working fine. However, when trying to connect my play station 3. I get upnp not available when I run the internet connection test. With that, i am not able to connect to Modern Warfare 3 online. Haven't tried other games yet but i sign in to the play station network without any problems.
I have Upnp enabled on my router. I have tried port range forwarding and DMZ settings to my ps3. and still not working.
View 6 Replies
View Related
May 19, 2012
HAve UPnP enabled in the EA3500 but QNAP keep telling me "Your router does not support UPnP protocol or you have not enabled the UPnP function on the router"
View 8 Replies
View Related
Aug 31, 2010
So I just setup my new E3000, upgrading from a WRT54G. The uPnP worked great on that router and my last three routers before that. Xbox never required I setup anything -- I can prove this simply by swapping routers and putting one of the old ones in place of the E3000.However, the E3000 (Firmware Version: 1.0.02) is not working with uPnP. Xbox connectivity test comes back and says that my NAT type is "Moderate". Most stuff works fine, but I'd like to get it all working. I worked with a Linksys tech who got NAT to "Open" by configuring triggered port forwarding. I am happy to have my issue resolved, but confused why uPnP didn't work? I mean it was easy for me to configure port forwarding, but for my less technical friends, should I simply not recommend this router because it can't do basic uPnP?
View 2 Replies
View Related
Jul 31, 2012
I have a similar thread about this issue, the issue of this modem not support any kind of port forwarding actions... even disabling firewalls, using DMZ, port range forwarding the whole ip range , solves a thing...
it has upnp and port ranging features all over it but somehow it does not do it, and nobody cares excepty the ones that invested in it...
so if you are stuck with a router like me, dont bother wasting hours on it, and leave it to the people who are responsible for it.
View 2 Replies
View Related
Mar 9, 2012
I recently upgraded my linksys E1000 to: linksys E4200 ( i needed gb port)
In my QNAP I can scan for upnp routers to set the forwarding port automaticly.
But it keeps telling my, it can't find an upnp router on my network. My E1000 was found without any problem!
If I open the port manually for example FTP 21. I cannot get acces from the internet, it keeps telling me its closed.
I forwarded it to the right ip. an clicked to apply. The website from QNAP says the E4200 is certified for upnp
So tho sum up: I cannot acces my NAS from the internet.
My setup:
Modem/router (ZIGGO) --- Linksys E4200 ---- QNAP 412 turbo
Linksys E4200 firmware 10.04
View 9 Replies
View Related
May 30, 2011
I have a Nat Strict problem with my router model WRT160N. I want to make a dedicated server with UT3.I tried many things like disabled all security in the router or disable UPNP, fowarding every ports that Unreal Tournament need or DMZ settings. I am running a batch file to start the dedicated server... but still have '' Nat is now strict'' in the log of my batch file. I cant see my server in the master server list inside the UT3 game. I tried to make the server without my router, directly connected to the modem and then it works instantly.
View 9 Replies
View Related
Feb 19, 2012
Is there support for album art or video thumbnails in the UPNP media server on the E3000? I've tried adding jpg files with the same name as the video file, but I see nothing in the client. I've also tried naming them 'folder.jpg' and 'cover.jpg' but still get nothing. If this isn't supported is there any plan to add support in the future?
View 2 Replies
View Related
Sep 28, 2011
New firmware for the Linksys E4200 was released this morning that adds certification for DLNA, IPv6 Gold log, and UPnP. It also addresses the Media Server issues that have been identified here in the community.Sept 28, 2011Last Firmware version: 1.0.03 (build 14)- Added supports of Native IPv6 over PPPoE Internet connection when only keep alive option is selected.- Added supports of Native IPv6 on guest network if there are more than two available IPv6 subnets- Added supports of Native IPv6 on Parental Control- Added supports of 3TB Hard drive with NTFS and HFS+ format- Improved firmware upgrade stability- Improved IPv6 WAN performance- Fixed media server unstable issue- Fixed Cisco LED flashing issue- Fixed some minor bugs- DLNA certified- IPv6 Gold logo certified- UPnP certified
View 1 Replies
View Related
May 2, 2012
I have both a Sony XBR52HX909 and a Sony BDP-S580 connected to my router (WRT54GL)via ethernet. When I try to connect to the internet, both show the wired connection as good but neither can connect to the internet. The BDP-S580 also has wireless connectivity, but it can’t connect to the internet wirelessly. I have two desktop computers connected via ethernet and two laptops connected wirelessly to the same router and all have internet connectivity. I have tried the “auto” settings on the TV and Blu-Ray player and also tried entering the network information in manually. I still can’t connect to the internet.
View 5 Replies
View Related
Feb 5, 2011
Last week suddenly my internet connection failed. I have tried several times to establish the wireless internet connection. Everytime when i tried to do this, i get the message 'can not get IP address'. Already tried to upgrade the firmware but still same message appears.
View 4 Replies
View Related
Apr 14, 2010
I want to use my router to boost the signal to the 2nd floor of my house, and Im having some problems.When I connect my router to the web application to change restore it to manufaturer setting the router keeps broadcasting my old SSID. The laptops in the house pick up that signal. I want to reset my router so it can broadcast my new network.
View 2 Replies
View Related
Nov 10, 2011
I have Wireless-G Broadband router Model WRT54GL. Everything is all setup correct but consoles and handhelds can't get the IP address even if there connected to the router. It isn't intill I turn off and then it back on does it get the ip address.
View 2 Replies
View Related
Sep 14, 2012
MY RE-1000 is up and working at 192.168.1.141. But I get nothing back when I put this address into IE.
View 3 Replies
View Related
Jun 20, 2012
I'm trying to use a WRT54GL with U-Verse. The problem is that the router does not get a connection to the modem. It can't ping the modem, and it doesn't show up on on the list of devices connected to the modem. DHCP assigns an IP address of 127.0.0.1, which is outside the range of the modem [192.168.1.1 ... 192.168.1.253]. The router is also showing a default gateway of 0.0.0.0, and a subnet mask of 255.0.0.0. (And yes, I have released and renewed the lease, rebooted the modem, and reconnected the modem.) The router WAN side is set to DHCP, and the operating mode was changed from gateway to router (the gateway setting doesn't work either, for that matter).
View 9 Replies
View Related
Mar 16, 2011
I currently own a LinkSys-WRT54GL 802.11a/b/g wireless router, and my ISP is Comcast Cable providing me with 15 Mbps (that's bits per second, I believe) download speed. I am wondering if there is any benefit with using an 802.11n wireless router to access the Internet? The maximum theoretical speed of the WRT54GL router is 54 Mbps (802.11g), which is faster than the 15 Mbps provided by my ISP.
I know that 802.11n has a max bandwidth of 300 Mbps, and it would work for intra- house transfers, such as streaming video from one computer to another.
But is there any benefit to 802.11n for Internet activity, such as web browsing, gaming, and streaming video from Netflix.
View 3 Replies
View Related
Aug 11, 2007
I have a problem activating UPnP on my BEFSR41 V3 router. Whenever I try to activate it the 'admin' default administrator password no longer works. I have to reset the router in order to get back into the configuration web page. is there a version of the firmware which fixes this problem? I am currently at firmware level 1.05.00.
View 9 Replies
View Related
Aug 26, 2011
I had configured the AAA server on CoovaAP and was able to access the internet.I had configured the user name and password as a "testuser" and "password" respectively. With that user id i used to access the Coova AP router and internet.Now i want restore the WRT54GL firmware on Lynksys router. But with the used id and password which i had configured the router is not at all accessible. So i did 30-30-30 reset on the router 2-3 times. Now i can see openwrt login page with 192.168.1.1 IP address. It is asking for user id and password. I tried all the combinations of user id and password, but no luck. I browsed some link on the internet and some people have recommended that default user id as a "root" and blank password. But with that also the router is not accessible. I cant to do much on the router untill i will log in to router. I have spent lot of time on this. How to restore back the original WRAT54GL firmware on my router. Anyhow i want WRAT54GL firmware on Lynksys router
View 4 Replies
View Related
Sep 7, 2011
I recently had to unplug my Linksys WRT54GL wireless router when doing some rearranging and now i'm unable to get a internet connection. I've confirmed the modem is actually working by connecting my laptop directly (which worked), but when I connect the Linksys WRT54GL wireless router to my modem the internet connection goes away. The connection is lost when connected via wireless and hardwired to one of the back ports. I've tried resetting the modem, router and computer and read every forum out there trying to find something, but i'm still stuck.
View 5 Replies
View Related
May 8, 2013
I have a problem with my linksys WRT54GL router. I entered here [URL] and i set it up, i can connect to internet on my PC and wireless works great but i can't set wireless password and name. When i go to the wireless tab, i write the new name but when i hit seve setting i get disconnected from internet. I try to go to status and click on Connect tab, when is connected internet works but the name and the password of the wireless that i set earlier is reset to default. What do i have to do to set name and password and have internet at the same time.
View 7 Replies
View Related
Jul 8, 2011
I would like to connect my old WRT54G3G router to my new WRT54GL (connect to dsl modem) and have wireless on both activated.I have set both on different channels with same SSID and same passwords on WPA2 Personal AES.I have also made the network IP different WRT54G3G 192.168.0.99 and WRT54GL 192.168.0.98.I have also deactivated network DHCP on 192.168.0.99. and Operating mode to router and still not working.
View 1 Replies
View Related
Jan 24, 2012
not being able to block websites like facebook and youtube on the router.
View 4 Replies
View Related
Dec 17, 2011
I am using a WRT54GL for the free wifi service at my business. Is there any way to set it so that when someone accesses the internet they are directed to my business home page first?
View 1 Replies
View Related
Sep 18, 2012
I want to use a linksys router with a 3com switch. 3Com model 3CGSU08A.i have two routers to choose from a E2000 and a WRT54GL which one is better and settings to use.
View 1 Replies
View Related
Jul 3, 2012
We have received from a customer of us an WRT54GL box configured with a Coova software. This Wifi router was supposed to be a Wifi hotspot, but was not configured by us. This box is able, on startup, to get an IP by DHCP, to touch a remote Radius server, and so on (we "tcpdump" the Internet traffic, and we saw DNS requests, radius requests, ...)...
But, we are unable to connect to this box,by SSH or by HTTP, either by plug-in PC to the Internet RJ45 or the LAN RJ45. It has no IP as 192.168.1.1. Instead, it was configured to have 192.168.1.1 as gateway.
Of course, we have no doc on previous install, but only the admin/root password for SSH.We are afraid to lose the config (coova, ...) if we perform a hard reset.What is the best way for connecting on this box ?
View 1 Replies
View Related
Oct 24, 2009
Why this router have DHCP server and Port forwarding features and many LAN ports, but does not have DHCP reserve feature? If I can plug many computers, each one get own IP address, but how I can't fix it? I need to port forwarding of course, but if lease time ended, next time my computer got other IP address, so I need to reconfigure port forwarding each time! Of course I can do it, but try to explain it for your wife? Yes, I can use static IP addresses, but for what this box have DHCP server?
View 9 Replies
View Related
Oct 26, 2012
I have E1200 wireless router and it was working nicely for the whole last year with 2 mac laptops hooked up on it. About 2 months ago there were 1 mac,1 win laptop and a network printer. And again, it was working just fine at the beginning. I'm not sure when exactly it happened first, but now after working couple of hours internet gets off and router stops responding. If I try to reconnect to it from my laptop I just see an error message saying something about "Connection timeout". Also I don't know does it have something to do with the network printer, btw it's connected to the router via ethernet cable not wireless. Anyway, the only solution I've found so far is power off the router for a couple of secs and power it on again, which is obviously not a solution at all, it's annoying and not practical. The time it works fine before it dies is also not fixed, it might be even 10 hrs of working and sometimes only 1-2 hrs. My other suspicion is firmware. I upgraded it almost at the same time when new laptop and printer showed up. Maybe I have to downgrade it, but I couldn't find older version of it. It was HW v. 1, SW v.1.0.00, and now it's HW v.1, SW v.1.0.03.
View 1 Replies
View Related
Feb 13, 2012
I accidentally pressed the front panel button labeled "Cisco Systems" on my WRT54GL wireless router. The button turned to a flashing white which I understand means that it entered SecureEasySetup mode. I then power cycled the router and the front panel button turned back to solid orange. However, now the "WLAN" lamp flashes a lot more often than before even when there are no wireless clients connected. It doesn't seem to be affecting connectivity or performance of my Ethernet connected devices or wireless connected devices. I re-entered my SSID and security key. That didn't curtail the increased flashing of the WLAN lamp. I also tried pressing the front panel button for 5 seconds. This only cleared my wireless settings.
View 2 Replies
View Related
Jun 24, 2012
I have a 16mbps (megabits) cable modem that is connected to WRT54GL. Desktop is located next to router and is connected with a cable, Laptop is connected on Wi-Fi. Both PCs achieve maximum speed when downloading from the internet but when I try to copy something from one PC to another over the local network I get stuck on max 2.5-3MBps (megabytes).
View 4 Replies
View Related
Jul 13, 2012
I'm using a WRT54GL(4.30.14) Router with a Charter Cable Modem running 5 computers on the network with 1 being wired and the rest are wireless. When my family comes over they can connect with their iPads and laptops but for some reason I can not get this iPhone 4G to connect. We put in the password and it says unable to connect. Are there any special settings that need to be made to the router to let the IPhone connect?
View 3 Replies
View Related
Dec 2, 2011
Connect my linksys WRT54GL router to the proxpn vpn privacy service as a client? (or any other vpn privacy service for that matter) I already have an internet connection up and live with a cisco router so I would need to connect the linksys to the cisco and use the linksys as a vpn gateway kind of thing, so that any computer connected to the linksys will automatically be in the vpn tunnel without needing any cleint software installed on it. The vpn service I use is proxpn but they won't support the settings of individual routers (understandable). The only setting they give for a PPTP connection is here
[url]...
View 3 Replies
View Related
Sep 22, 2011
I've had a WRT54GL ( for about a week now ) with no real issues. Today my wife mentioned that the net's been flaky ( wireless nto hard wired ). I originally noticed what seemed like minutes for my desktop of laptop to connect to any web pages. Loads were extremely slow. According to the computer I had a 1 mbps connection. I did the standard resetting of the modem and router.babble babble babble. Eventually, I ran a wifi analyzer from my phone to determine an ideal channel. However, while running the frequency scanner I also noticed that my broadcasting would continue to drop off the radar for a quick moment then return. This seemed to be true no matter what channel I set. What's interesting is that the signal would read as extremely strong for 45 sec - 1 minute, then completely drop the signal, then another strong broadcast. Other neighboring signals don't exhibit this behavior....well I would see the weaker signals coming in and off the radar from time to time. I'm guessing it's some type of interference? However if that's the case I can't explain why my signal seems so strong. I'm assuming I'd see a lot of fluctuation in my signal before dropping off ( instead of going from 100 to 0 in the blink of an eye ).
View 1 Replies
View Related
