Linksys Wireless Router :: WRT160N Disabled All Security Or Disable UPNP
May 30, 2011
I have a Nat Strict problem with my router model WRT160N. I want to make a dedicated server with UT3.I tried many things like disabled all security in the router or disable UPNP, fowarding every ports that Unreal Tournament need or DMZ settings. I am running a batch file to start the dedicated server... but still have '' Nat is now strict'' in the log of my batch file. I cant see my server in the master server list inside the UT3 game. I tried to make the server without my router, directly connected to the modem and then it works instantly.
View 9 Replies
ADVERTISEMENT
Aug 30, 2012
Trying to secure Linksys WRT54G V8 wireless router. Can't change security mode from 'Disabled'!?
I followed this Post from EXPERT: "Connecting two routers wired - the definitive answer"
[url]...
I got the two routers working but the second one (not using it as a router) is not allowing me to change security mode from "disable" to WEP or anything else.The following Post didn't answered this issue: "Can't change wireless Security Mode on my WRT54G V5"
View 8 Replies
View Related
Apr 1, 2012
This problem is on a Cisco E1200 (FW: 1.0.03) and using a browser to modify the routers settings.I'm connected to the router from a wired connection, and I'm trying to turn off the encryption, and just have the router have the setting "disabled" as the selection for "Wireless Security".
However, it seems when I do this, the moment I press "Save" the router gets disconnected from my computer (the wired connection) and the only way to get reconnected is to run the Cisco Connect software from the computer that's hard wired to the router.
Once I get back to that screen in the routers settings, and try it again, the same thing happens.If I change anything else under the routers settings, the connection stays connected, but only when I change the wireless security settings to disabled I see this problem.
View 1 Replies
View Related
Nov 5, 2011
How do I set a security password.
View 1 Replies
View Related
Oct 17, 2012
I have a WRT160N that I've been using with my HDTV for months. Now I want to connect a BluRay player to it, but the setup requires me to enter a security code, and the one I had for the router doesn't work. Can I change the number, or at least double-check the number I do have?
View 4 Replies
View Related
Feb 18, 2012
Whenever I try to set up a security code for any of the settings (WEP/WPA etc), as soon as I hit save my computer does not recognize it and I get kicked off the internet and have to restart my router. I have the Linksys model number WRT160N V3
View 2 Replies
View Related
Jun 7, 2012
I recently upgraded the firmware on my wrt 160N v3 and changed the wireless security to WPA2 Personal from WEP (I needed to do this to get higher speeds from a recently purchased wireless adapter). Now the router stops transmitting a signal intermittently for about a minute before coming back on line. The time between droppages is also not the same. Before the firmware upgrade (and the change in security settings) the router was rock solid. Where I can get the older version of the firmware (which seems to be more stable than the current version)?
View 4 Replies
View Related
Feb 28, 2013
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Comcast
Why am I unable to "disable" the UPnP in my TP-LINK TL-WR1043ND wireless router? When I click on the "disable" button nothing changes. I click on the "disable" button that then click of "refresh" and it still doesn't change to disabled.
View 3 Replies
View Related
Dec 1, 2011
I've had a WRT160N v3 for a couple of years, and I've noticed that the wireless security setting is often set to disabled when I go into the configuration, even though I've set to enabled previously. It goes like this....
I've setup the router to have WPA2 Personal security enabled, with a passphrase. I have several devices that use wireless that connect to it everyday. I recently received a new device, so I went into the Linksys configuration to get my passphrase, and the Security is set to disabled. So, I enable it again, configure a the device, and have no problems.
This has happened many times. I just happen to be in the router configuration and check the wireless security tab, and it is set to disabled.
My first thought was that maybe there had been a power loss (although, I can't remember the last power outage we had in my area). However, every other setting was retained, so I can't see why this would be the only one that changes (and it's a rather important setting). Additionally, I was configuring a blue-ray player last night, trying to see if it was better with a wired setting from another Access Point, and the setting was disabled, so I enabled it again. I made changes to the BR player, then changed it back to a wireless connection. I checked the security setting on the Linksys, and AGAIN it was disabled.
View 5 Replies
View Related
Jun 23, 2011
I have a DCS-930L network camera that I configured from its Web-based interface. In SETUP | Network Setup, I have disabled both UPnP and UPnP Port Forwarding. In my router's (Netgear WNDR3700) settings, I reserved the local IP address, 192.168.1.80, for the DCS-930L. In the DCS-930L I assigned the network camera HTTP Port 8000; therefore, I can access the DCS-930L on the LAN from [url].... In addition, in the router, I have forwarded port 8000 to the local IP address, 192.168.1.80, so I can access the DCS-930L from outside the LAN.I can access the DCS-930L both from within the LAN and outside of the LAN.
However, even though UPnP and UPnP Port Forwarding in the DCS-930L are disabled, the DCS-930L keeps adding and deleting UPnP NAT rules in the router. In addition, a system at the IP address, 207.232.83.172, keeps attempting to access the DCS-930L from different ports. I traced the IP address, 207.232.83.172, to the ISP, Telekenex, in Los Angeles, California. A partial log from the router is below.[code]...
View 2 Replies
View Related
Jan 24, 2013
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820 Rel.73549n
ISP : Cable TV provider
It seems there is a bug with TL-WDR3600. As it can be seen in the following image, the UPnP is off:But my firewall on the computer is reporting flood of packets originating from the router (it's the routers MAC address and IP address):I don't know what ETH type packet is, 0026 might be hex (38 decimal as seen in the raw log). But port 1900 is definitely UPnP.At the router, the wireless switch is off, as well as all other options for sharing etc. This computer is the only one connected to the router. The router has been reset several times.
View 1 Replies
View Related
Nov 26, 2011
I just set up the x2000 at my home Everything seems to be working fine. However, when trying to connect my play station 3. I get upnp not available when I run the internet connection test. With that, i am not able to connect to Modern Warfare 3 online. Haven't tried other games yet but i sign in to the play station network without any problems.
I have Upnp enabled on my router. I have tried port range forwarding and DMZ settings to my ps3. and still not working.
View 6 Replies
View Related
Feb 23, 2012
I have a wireless router and I'm trying to user UPnP feature. of course it is enble in the router.
It's working one and after it stop working, looks like the router is not responding anymore. If I got on the web interface of the router, I loging, on the first web page I press save changes, even if I didn't change anything, the UPnP feature work again.
Looks like a timeout occure or something like that. Is there a way to wake up the router without having to go on the web interface? Why it's stop working?
Firmware Version: v4.30.15
View 1 Replies
View Related
May 19, 2012
HAve UPnP enabled in the EA3500 but QNAP keep telling me "Your router does not support UPnP protocol or you have not enabled the UPnP function on the router"
View 8 Replies
View Related
Aug 31, 2010
So I just setup my new E3000, upgrading from a WRT54G. The uPnP worked great on that router and my last three routers before that. Xbox never required I setup anything -- I can prove this simply by swapping routers and putting one of the old ones in place of the E3000.However, the E3000 (Firmware Version: 1.0.02) is not working with uPnP. Xbox connectivity test comes back and says that my NAT type is "Moderate". Most stuff works fine, but I'd like to get it all working. I worked with a Linksys tech who got NAT to "Open" by configuring triggered port forwarding. I am happy to have my issue resolved, but confused why uPnP didn't work? I mean it was easy for me to configure port forwarding, but for my less technical friends, should I simply not recommend this router because it can't do basic uPnP?
View 2 Replies
View Related
Jul 31, 2012
I have a similar thread about this issue, the issue of this modem not support any kind of port forwarding actions... even disabling firewalls, using DMZ, port range forwarding the whole ip range , solves a thing...
it has upnp and port ranging features all over it but somehow it does not do it, and nobody cares excepty the ones that invested in it...
so if you are stuck with a router like me, dont bother wasting hours on it, and leave it to the people who are responsible for it.
View 2 Replies
View Related
Mar 9, 2012
I recently upgraded my linksys E1000 to: linksys E4200 ( i needed gb port)
In my QNAP I can scan for upnp routers to set the forwarding port automaticly.
But it keeps telling my, it can't find an upnp router on my network. My E1000 was found without any problem!
If I open the port manually for example FTP 21. I cannot get acces from the internet, it keeps telling me its closed.
I forwarded it to the right ip. an clicked to apply. The website from QNAP says the E4200 is certified for upnp
So tho sum up: I cannot acces my NAS from the internet.
My setup:
Modem/router (ZIGGO) --- Linksys E4200 ---- QNAP 412 turbo
Linksys E4200 firmware 10.04
View 9 Replies
View Related
Feb 19, 2012
Is there support for album art or video thumbnails in the UPNP media server on the E3000? I've tried adding jpg files with the same name as the video file, but I see nothing in the client. I've also tried naming them 'folder.jpg' and 'cover.jpg' but still get nothing. If this isn't supported is there any plan to add support in the future?
View 2 Replies
View Related
Sep 28, 2011
New firmware for the Linksys E4200 was released this morning that adds certification for DLNA, IPv6 Gold log, and UPnP. It also addresses the Media Server issues that have been identified here in the community.Sept 28, 2011Last Firmware version: 1.0.03 (build 14)- Added supports of Native IPv6 over PPPoE Internet connection when only keep alive option is selected.- Added supports of Native IPv6 on guest network if there are more than two available IPv6 subnets- Added supports of Native IPv6 on Parental Control- Added supports of 3TB Hard drive with NTFS and HFS+ format- Improved firmware upgrade stability- Improved IPv6 WAN performance- Fixed media server unstable issue- Fixed Cisco LED flashing issue- Fixed some minor bugs- DLNA certified- IPv6 Gold logo certified- UPnP certified
View 1 Replies
View Related
Sep 11, 2011
How do I disable the USB port in the 881 router?
881router#show usb port
Port Number: 0
Status: Disabled
Connection State: Disconnected
Speed: Full
Power State: ON
View 3 Replies
View Related
Mar 15, 2011
In order to get my wireless printer up and running I need to temporarily disable my actiontec PK5000 router.
View 11 Replies
View Related
Feb 1, 2011
We have a standard modem/wireless setup that has worked fine for years. Last month, my sister brought her laptop over and, for some unknown reason, choose "set up a connection or network" and unknowingly changed the setup to a security enabled network. I have no idea why she couldn't just log on without any problem. She has the same modem at her house, and I have no problem logging on at her house. Anyway, it now asks for a password, and she swears she never entered one. I can go online if I plug in an ethernet cord but that means my laptop can only go online at my desk. And I cannot use the internet features on my ipod touch. Is there a way to reset the modem back to a regular unsecured setup?
View 4 Replies
View Related
Aug 11, 2007
I have a problem activating UPnP on my BEFSR41 V3 router. Whenever I try to activate it the 'admin' default administrator password no longer works. I have to reset the router in order to get back into the configuration web page. is there a version of the firmware which fixes this problem? I am currently at firmware level 1.05.00.
View 9 Replies
View Related
Mar 6, 2011
I have a netgear VMDG280 router and my girlfriend has a DS.. her dumb DS doesn't understand any protocol apart None and WEP apparently..She has to go online with her DS to get some mystery gift on pokemon.. I am too old for this I swear. I poked around the settings but the Router appears to have come pre-configured and I cannot find any setting in the router admin panel to disable security.
View 1 Replies
View Related
Jun 27, 2012
Linksys has disabled my wireless adaptor for wireless devices such as my Netflix streaming movie player. They are asking for my routers user name and password which I am not accessing right, I get "401 Authorization required" How do I factory restore my router? It's a D-Link DES-1105 router model BEFW1154V4. I need to enable my network for wireless connection. How to get my routers user name and password? I 've had my Netflix player hooked up and working for almost a year and have never encountered this problem. Im going to purchase a linksys wireless adaptor the first of the month with having a secure connection to linksys instead of having to wait all day for wireless linksys with the Ativa adaptor I already have?
View 2 Replies
View Related
Sep 11, 2011
I have a cisco e1000 route. i've already set up wireless network successfully with cisco connect software. However, when i logged in web-based config, i disabled NAT with the routing table is unchanged. the problem is anyone from the network to which the Internet WAN port links can ping and receive reply from PCs inside the wireless network but it's impossible for the reverse direction and any traffic from the inside of e1000 can't be passed through.
View 6 Replies
View Related
Jun 4, 2012
I call century link because my router was not connecting at the proper speed of 7 mbps. That problem was easily remedied over the phone but the lady said she could see several devices connected. This lost me a bit because I have a double router configuration. The Action tech PK5000 i turned into nothing more that an internet modem. I disabled the DHCP and configured my Linksys E1200 for all the internal DHCP so there is only one cable going to the PK5000. I should technically speaking look like one user on there network with natural protection from the second router.
View 5 Replies
View Related
Jul 16, 2012
I just purchased an e4200 in a corporate environment where we already have a wireless router. I am not able to connect the 2 devices via a LAN cable and am wondering if I can get bridge mode working over the network (wireless). I set the Linksys to bridge mode and assigned it an ip address. I disabled all wireless settings, etc. I then connected the internet port of the Linksys into a data port (wall jack) that connects to our flat network switch. It says it's connected under "Status" but I'm not sure how to confirm this.
View 3 Replies
View Related
Feb 11, 2011
I'm trying to stream music files to my A/V system. After weeks of encountering problems, I discovered that UPnP was disabled (by default) on the router. After enabling UPnP on the router, bingo......it worked. My A/V system has a Yamaha A/V receiver, which is a networking receiver capable of net radio and accessing/playing files on my PC. Net radio works fine. The problem I'm having is that when I shut down the A/V receiver, turn it back on, I can't access the files. I have to disable UPnP, save changes, and then reenable UPnP, save changes. When I do that, all is well and my receiver "sees" my PC and files. Shut down the receiver, turn it back on, back to square one and have to do the do the disable/enable routine again. PC is WinXP, using Windows Media Player 11. Seems the "enable" UPnP desn't "stick", even though it shows enabled on the setup page.
View 6 Replies
View Related
Apr 19, 2009
BEFSR81 v3.0.I selecting Enabled UPnP and now I cannot access the router. When I enter the default admin for the password in the Authentication Required screen. I get the following screen: 401 Authorization RequiredThis server could not verify that you are authorized to access. Either you supplied the wrong credentials(e.g., bad password), or your browser doesn't understand how to supply the credentials required.I didn't enter anything new into the username or password fields.
View 5 Replies
View Related
Aug 3, 2011
I had to restore my laptop yesterday and i reset my router (WRT100). I ran all the Microsoft updates, but I didn't do anything with the router other than going to the Linksys site to try to make it secure. My computer seems to be recognizing the router (although it is still saying it is an unsecured connection) but I cannot get on the internet. The problem seems to be when I pull up the Network Connections window the "Internet Gateway-Internet Connection" is showing disabled. I cannot enable.Everytime I try, it says "connecting...Connection failed!". I can plug the ethernet from the modem to the computer and it works and the "Internet Gateway" doesn't appear, but when I try through the router it does. I want to set up the router because I have two computers that need internet access.
Three connections are listed--Wireless Access, LAN, and 1394 Connection. All are listed as connected, firewalled.The second computer is also giving me a problem. There is the wireless issue, but when I connect the ethernet from the computer directly to the modem I am asked if I want to connect via Broadband and am asked for a username/password. There is no username/password. I've contacted my ISP (Cox cable) and confimred there is no password.
View 1 Replies
View Related
Dec 1, 2011
why my SSID still displays even though I have the SSID Broadcast "Disabled" for 5 GHz and 2.4Ghz configurations. The name of my network shows full signal strength and a lock next to the name but I was under the impression if I have disabled the SSID broadcast it shouldn't show up at all and would force a user to manually input the network name when trying to connect to it. I have the router configured to only allow certain MAC addresses wireless access as well. Router is running Firmware Version: 1.0.03.Also, my primary computer my iMac running 10.7.2 boots up or is brought out of sleep mode I constantly need to go up to the top of my screen and re-select my network.
View 4 Replies
View Related
Apr 5, 2012
Here is where I want to go:
Windows server 2008 (providing DHCP and DNS) 192.168.89.1 on all
Cisco SG 300-20 (switch) 192.168.89.3
all Clients(15 x DHCP assigned IPs) connected to switch
WRT300N(192.168.89.2) connected to switch
Internet modem connected to WRT300N
To achieve this I need to disable DHCP on the WRT300N, since my server is providing DHCP.The issue I have is that when I disable DHCP at the WRT300N, I lose internet connection (connected to either switch or direclty to WRT300N).
View 6 Replies
View Related
