I have setup a new network profile on my desktop pc. When I click on the connect icon (bottom right side of screen) it doesnt show. There is.. Linksy 2 internet access Uniditified network no network access
If I click on Open network and sharing center, manage wireless networks, it shows the new network name, security settin, etc.. and connect automatically
Router WRT 610 N Hughesnet sattelite modem
I have" a WRT160N but I guess we had a power outage while I was on vacation and now I can't connect to my old network I set up.I see the Linksys internet connection and I can connect but its not the password protected one I set up. When I go to "manage connection" I can see the old "house" connection but can't connect
View 4 Replies View RelatedWill a realtek wireless network adapter connect to a Linksys WRT 110 router from a wood frame house to a concrete building approx. 100 ft. away
View 1 Replies View RelatedMy linksys used to always connect toa secure network, (secure network does show up in network list) BUT the linksys will only connect to unsecure shown network. How do I get it back to connecting to the secure network?
View 1 Replies View RelatedI have a new Linksys E1000, and I would like to connect my HP 2035 Laserjet to the router, avoiding connecting it directly to my desktop (wired to the router) or my laptop (wireless). When I connect the Ethernet cable to the printer and the router?Both PCs are running XP, and the printer was connected to the laptop before I got the wireless router.
View 2 Replies View RelatedI was requested to connect 2 WRT54G devices in our network with same ip range.
View 2 Replies View RelatedSwitched from a Netgear router to a Cisco E2500 and now my Samsung blue ray won't connect to internet.
It says physical connection established but can't connect to external network.
I have a WRT54G version 3.. i have finished installed it using the web based set up but i can't connect my mobile through the wireless network.
View 1 Replies View RelatedI have an E4200v2 configured with an n-only 5GHz network and a mixed 2.4GHz network. Our MacBooks and iPad connect to the 5GHz network, and everything else (iPhones, TVs, etc) connect to the 2.4GHz network. If I disable "WMM" on the QoS screen, nothing can connect to the 5GHz network. Those same devices can connect to the 2.4GHz network, but not the 5GHz. The MacBooks, for example, get a connection timeout error, and the iPad just says "cannot connect." This doesn't seem quite right. I don't absolutely need to disable WMM, but I wanted to make sure that normal WiFi Internet traffic didn't get priority over local wired Mac->AppleTV streaming or voice calls from our wired Vonage box.
View 2 Replies View RelatedI have a Linksys WRH54G which I have been using for about and year now. Everything was working perfectly when today, for no apparent reason my mobile phone stopped connecting to the wireless network. Yes, I know there could be some problem with my phone but I want to make sure that my router is not at fault. I have reset the router and setup everything from scratch.
View 9 Replies View RelatedI have the E3000 router. I set it up about a month ago and had my laptop and iphones and ipads all hooked up and working great. About two weeks ago, all of my devices are having problems connecting to the network and if they do connect, it is unstable (slow speeds or constantly dropping from the network). I know it is not the internet due to the fact that my LAN connection (hardwired) runs great. I am pulling my hair out trying to figure out why. I have restored to factory defauls and started over setting it up with no change in performance. I have the latest drivers on the router and the laptop. I thought maybe it was vista and my laptop or network card, but the fact that I cannot get my phones or ipads to connect with good performance I am starting to think it is something to do with the router. Also, just for more info, I am using Chater cable internet. I am running vista 64x on the laptop.
View 1 Replies View RelatedYesterday i was playing online on my Xbox 360, and was disconnected from the internet. I came downstairs to reset router/modem, once doing so i went into the router settings for my Linksys WRT54G. My modem by default uses the 192.168.1.1, so my router was 192.168.2.1... So i powercycle, log into router settings through 192.168.2.1 and start setting up my port forwarding for the xbox ports. Saved Settings, and the page would not load to say "Settings Saved". Closed the window and now my pc says no internet connection. I had to create a VPN broadband connection to even use the internet on my pc. I can no longer log into 192.168.2.1 for my router, nor can i access 192.168.1.1 to even get into my modem settings.. I'm using windows 7, and the automatic troubleshooting guide tells me to powercycle my modem. My xbox can still see my wireless network "linksys" but will not connect to it, even with the VPN connection i am still hooked though my router and modem.. Im afraid that my router just out of nowhere "died"..
View 2 Replies View RelatedSo, with the latest firmware update I could add a second e4200 to my network to use as a bridge or access point? What I need is another device in my living room that can pick up the wireless signal and dish out network connectivity to my receiver, xbox360, and ps3. With the new firmware update can this be done with a second e4200? How does one connect to each e4200 on the network for setup (dohave to change the default ip address of 1?)I just bought a trendnet TEW-687GA 450 mb/s wireless gaming adapter and a trendnet 5 port switch to accomplish what I mentioned above. I'm just wondering if there is an advantage to switching over to two e4200's. The trendnet adapater does not have a 5ghz channel.
View 2 Replies View RelatedI have a Linksys E1500 wireless router that I have had for about 3 months and it has been working great up until today. I realized non of my wireless devices could detect the network, so I got on my PC which is hard wired to the router and it to says it had no network connection. So I power cycled both the router and the modem. When it came back up, this PC that I am typing from now has an internet connection but is says it is connected to Network 2 instead of the routers name for the network. My other PC that is hard wired to the router says its not connected to the network, and when I open up the Cisco Connect software it tells me my router is not plugged in. Also, nothing works wirelessly.In the web control panel it still has all my setting intact but still looks like its not connected to the internet.
View 1 Replies View RelatedI have a Cisco 4200 Wireless Router connected directly to my cable modem. To extend the wireless range I purchased a Cisco 2500 Wireless Router. As the house is "wired," I can connect the Cisco 2500 to the cable modem in a room separate from the Cisco 4200. My question is how do I configure the Cisco 2500 to connect to the network and provide wireless coverage from both routers.
View 6 Replies View RelatedI have been using this router fine for a year now. Now I can only get on the internet if I am directly plugged into the modem. It says I have limited connectivity. My ISP is Comcast. I have tried resetting the router with no luck. I have tried to update the drivers but I cannot even log into 192.168.1.1. I am in dire need of the wireless cpability. When I go to the run command and type ipconfig it tells me I have no default gateway.
View 9 Replies View Relatedhow to connect a network printer (HP OfficeJet Pro K8500DN) to the Cisco AE4500. Cisco's installation CD only believes there are USB or Wireless printers?
View 4 Replies View RelatedSo I have a WRT54G router since a couple of years now. Laptop (Win7 64bit), ipod, ipad, phones can connect to it without a problem, but new computer (Win7 64bit) can't. I can connect the PC via ethernet without a problem though.
I powercycled my devices, I changed broadcasting options off and then back on, changed my security mode, tried the MAC Cloning (after doing the MAC Cloning, I lost internet connectivity even through ethernet), resetted my security settings, changed SSID, I'm broadcasting through channel 11 2.462. I also tried deleting the HomeGroup
Important fact: the network is in the list of available wireless network, but Signal Strength is No Signal and I can't connect to it. My network adapter is ASUS 802.11n Wireless LAN Card, drivers are up to date. I've upgraded to the latest router firmware.
[Code]....
This was for a WRT160n v3.0.02 I looked up several suggestions online and decided to update the firmware to v3.0.03 This seemed to only make it worse as I could no longer connect, and when I turned the router off and back on it would allow me in for about a minute and drop me right away.I started tweaking with the settings, and came across some posts here such as this one, started tweaking with the channel settings and everything. Nothing. If anything I somehow made it worse since now instead of dropping repeatedly it wouldn't connect at all except for about a minute after restarting router, then it would drop completely (I would either get the limited access notification or I simply couldn't connect and windows said to unplug the access point. I recalled I had another Linksys router that I wasn't using in storage, a WRT54G2v 1.0.01 so I set that up, no problems... at first. All other devices picked it up right away, but once again, my new laptop decides it's too good for the freaking network and drops it repeatedly telling me there's a problem with the access point.
So at this point I'm thinking it might NOT be my network, but my wireless card or something, I uninstalled and reinstalled, updated drivers, (I use a Realtek RTL8723AE Wireless LAN 802.11n PCI-E NIC) I even came across this article and disabled browser service and NETBios (including all other devices on my network). It brought back the network on my laptop for a bit, only to smugly come crashing down again.
When I boot my system lately I have to fiddle with task manager to get things stable enough to connect to my network. This is getting very tiresome. I always find OdHost.exe taking almost all the CPU and have to kill it to get things running. This can't be normal and has not been until recently. I don't know of anything that has been installed in the last several months that is network related.
View 1 Replies View RelatedMy network is discoverable, but my machines will not connect (they were connected previously). They can connect to the 2.4gHz network, but not the 5 (I use the 5 for streaming media and gameplay). Windows 7 says it's unable to connect.
View 8 Replies View RelatedI have a WRT610N which does not allow me to connect any new devices to the wireless network. This is a recent problem as I have been able to connect new devices before. Devices on the wireless network, those that have been on the network, are able to disconnect and reconnect. Just new devices are excluded. Have gone through the admin screens to see if something is amiss but can not find anything.
View 5 Replies View RelatedI am unable to connect the Asus PCE-N13 (Windows 7 host) to the WRT610N V1.0 N network. The adapter does not see the N network on the LinkSys but there are other N networks in the list. I have updated the latest drivers. My PC Laptop, Macbook Pro, and Xbox 360 connects to the N network.
View 2 Replies View RelatedI have a Linksys WRT120N which had suddenly and unexectedly stopped working after disconnecting my roku box. I didnt worry about it until I got an Iphone and now .I was able to re-establish the wireless connection on my netbook today after a ton of research and messing around with the settings and then downloaded network magic, which finally fixed the problem. I believe that it automatically transmitted the WEP key to the Netbook, which is what I am missing when I try to log into the network on the Iphone.How do I get this password to show up on Network Magic? When I look at the settings, it does not show the actual numbers, they are hidden.
View 6 Replies View RelatedMy iPad cannot connect to my network wireless through WPA2 using router E4200 the way my Macbook is connected. Only using guest access i can get internet contact. Is this a known problem with this combination and/or is it meant to be, that only guest access gives an iPad connection?
View 6 Replies View Relatedi have my E1000 network detected by laptop and devices but can't connect to Internet. The E1000 is connected to Cisco 2100 modem and I can connect to Internet if I plug my laptop/PC directly to Cisco 2100 modem.
View 2 Replies View RelatedI recently installed a new router - WRTP54G . I used to have our 2 machines on a home network. However, that is all gone now. When I open My Network Places on my pc, nothing at all appears. On the other pc only the shared folders on that pc appears. I've tried running the network wizard several times and to no avail. I've checked the permissions and everything else I can think of, but it still doesn't work. I believe it is probably something simple to fix, like checking the right box, but I haven't found it yet. Both machines are running XP Home and I have an external drive attached to my pc. Everything worked fine till the installation of this new router. Should I just create a new network? Would that just be easier? One more thing, I got the error that says Home is not accessible. You might not have permission to use this network resource. Contact admin of this server to find out if you have access permission. The network path was not found. Of course, I am the admin.
View 9 Replies View RelatedI've recently purchased a Linksys EA4500 router. I've got home, I've used the installation guide CD thingy, connected 3 of my laptops wirelessly, no issue there.However when I tried to connect my 4th laptop problems came along. The problem I was dealing with was that I couldn't connect to the router. I mean I could see the network name appearing in the list, but when I tried to connect the network would just dissapear from the list, not connect, and wouldn't back on the list unless I've reset the laptop. Anyhow I've ignored that computer because I thought it was two years old and it might have had a wireless network adaptor issue, although it was conneting with no problem to my former router D-Link DIR 365.Anyway, just yesterday I've purchesed a brand new netbook (Evolio U9) and it doesn't see my router, although it sees all the other connection availables (my neighbors' wirless networks), I even connected to one of them just to test if anything was wrong with the netbook.
I also have problems when trying to connect with an Iphone 4. Well, it does connect, but the connection to the iphone just goes on and off making it impossible to use. It's really strange that all the 3 Iphones in my home have no issue connecting, not even my Glaxy S3, nor any of the Smart Tvs, nor the printer.Does the router have any number of limited connections available? The router configuration is the ones done from the CD. I've only assign a SSID and a WPA password.Please note that all the computers above are GENIUNE Windows
Set up our E3000 following the set-up guide. However, wireless devices (laptop, iPhone) recognize the network, but cannot connect. There's no prompt for a password or anything.
View 6 Replies View RelatedHow do I setup a WRT160N as a wireless adapter to connect a wireless printer to my network? I do not use the wrt 160 as a router because I have an AT&T router for u-verse connection. Also, I physically cannot wire the printer to the main router (opposite corners of the house).
View 2 Replies View RelatedI am unable to connect my Ipad3 to my home network (WRT160N router). It has been working for the last 8 months, and stopped working after I installed Direct TV App on Ipad..It detects the network, but not accepts the PW.... I have multiple wireless devicess connected to my network without any problems..The funny thing is that my neighbor brings his ipad to my house and he is able to connect..My ipad connects to any other network...just not my home network.. I contacted Apple who spend hours with me on the phone and suggested doing a full reset on the ipad, but still did not solve the problem..I called and already paid for linksys support ($62.95) who spend hours with me on the phone, but suggesting: "maybe you need to buy another router"...REALLY!!!! Again, I have 3 Smart TVs, Xbox360, and Wii, that are connected to the network just fine .even my neibor comes with his Ipad3 and connects to my network just fine......and I can connect with my ipad to any other network without any problems... BTW, I have already removed the DirectTV app from the ipad....but I still cannot connect to my network..
View 2 Replies View RelatedI have a xbox 360 that I want to connect to xbox live with, using my home network. Every time I try to connect to xbox live the only part that fails is the connecting to xbox live part. This is how my network is set up. I have Cox Cable as my ISP, a Linksys WCG200 gateway(v2), and WRT54GS(v7). The cable wire is connected to the WCG200 gateway, then an Ethernet cable connects the gateway to the WRT54GS router, and finally an Ethernet cable connects the router to my xbox 360. I have contacted Cox, Linksys, and Microsoft about the situation and they all say the problem is the version of the router. Someone told me that I may just need to change the firmware, but I don't know how to do that.
View 9 Replies View RelatedI have a Linksys Wireless G Model WRT54G2V1 using WEP encryption. I recently added a laptop. It can access various non-decured netowrks. It can see my home network but is unable to connect despite entering the correct passcode. how to get the laptop and secured network to communicate?
View 1 Replies View Related