just got the computer home and hooked up yo a gateway two wire dsl. new window 7. this mb was supposed to have a built in network. but i can't get it to connect to internet. isp says its the computer because it does not show up to them as even being hooked up. i keep getting error 651 and 638.
View 1 Replies
My internet service grinds to all but a halt as soon as I plug in the ethernet cable to my desktop. Nothing is running in the background (that I can determine). Nothing is spamming data up or down (that I can determine). I get 40ms ping and 12Mbps downloads on every device I have until I plug in my big boy; then all the speeds come crashing down to 600ms ping and 0.9-1.4Mbps downloads (including the desktop, I have not been able to play SWTOR for weeks now). It's not the provider, (I thought it was) but I switched from Time Warner to AT&T with the exact same results. ASUS P8P67 Pro; I've had funky issues with USB ports and one SATA port died. Other friends suggest I may have an awful bug and I need to wipe and start over. I wouldn't mind doing that, but I don't have a windows recovery disk (my copy is legitimate).
Mobo-as listed.
CPU- i5-2500k stock, not clocked
RAM- 16GB G.Skill Ripjaws X DDR3 1600
I am having an issue with my motherboard/ internet connection. when I am torrenting over a WIRED connection, my internet will randomly disconnect from the internet. my network will have the yellow triangle with the ! in the middle.
1. removed router from equation and still disconnects
2. tried different cable and still disconnects
3. tried reloading the OS from 64bit to 32 bit and still disconnects
4. downloaded latest drivers from realtek and still disconnects
5. tried wireless and it works fine
now i have onboard wirelessN as well as gigabit internet (everything is brand new). wireless works fine but that may be because it is not reaching the same speed/connections as my wired connection. im thinking its my onboard nic but it works fine unless I am doing heavy torrenting. i wouldnt mind wireless but this is an always on HTPC/server
I have an ASUS P5E3 Deluxe motherboard and am having minor connection issues. Occasionally it will have trouble connecting to the internet....IMO, the traffic gets stuck as it attempts to send requests through the non-internet connected line. Here's how I have it connected, running Windows XP: It has a Realtek ethernet jack which is LAN 1 on the Connections menu and that line is connected to the router for internet. Typical set-up that automatically assigns IP address and all other options. It also has a Marvell Yukon connection (LAN 2) that connects to the server so that I can use the networked printer. I've assigned an IP address within the range of the settings on that router. The printer works. Is there a way to direct all internet or web data through one card so that the connection doesn't get bogged down? The server has no internet connection so I don't want any internet requests to go through the Marvell Yukon ethernet jack.
View 4 Replies View RelatedInstalled windows server 2008 and enabled wireless in the server manager but when I try to install any drivers for the wifi I get the error message "must install in windows 98 (SE), windows me, windows 2000, windows xp, win 2003, vista!"server 2008 uses vista drivers?
View 1 Replies View Relatedone of my wireless computers (windows 7 pro) won't connect. I am baffled to the problem.
Router: Asus RT-N12 with latest stable firmware version
2 other laptops will connect with no problem. My phone will connect to it no problem. My 3 other laptops also connect to it with no issues as well. A wired computer will get Internet access to it no problem. This computer (a desktop with a pci wireless card) won't connect to it. The SSID will not show up on the computer unless I manually put in the SSID. Then, it tries to connect, fails, and the SSID goes away. It will connect to the wifi tether on my phone with no issues. My phone has the same security settings, encryption protocols, etc. as my router. It will connect to a neighbor's unprotected wifi without issue as well.
i replaced a lightning damaged Linksys router in my home network with the RT-N56U. My main computer is Win7 64, (Phenom II quad, asus M490GTD) , my wife's computer(wired connection, Dell P5Duo) and my work laptop (wireless connection HP core I5) are XP. I have a USB printer attached to the wife's computer and two wireless Squeezebox receivers. This network worked with the old router. With the new router i can access internet from all computers, and connect to the new network with the Squeezeboxes. I cannot print from the main computer, even though the printer shows up in the devices window and the test page spools.
View 4 Replies View RelatedI just a new motherboard yesterday an ASUS P7P55D. Running windows 7 and using ethernet, the internet would cut out after a few minutes and come back again by itself and cut off again. After turning on xbox live i realised that my computer is causing problems for the router and cutting off the connections.
View 1 Replies View RelatedI just bought a Asus PCE-N15 and installed the drivers and utilities but after I restarted the utility told me that I have taken it out of my computer but it was still in there. I have tried all of my PCI slots tried ASUS and Realtek drivers and utilities and uninstalling removing and reinstalling and even contacting costumer support. Costumer support didn't tell me anything but reinstall the drivers.
View 2 Replies View Relatedcurrently i have my server computer in room a, and i have 2 computers in room b. my current setup is.Server---ethernet cable-----router-----modem, for the computers in room b, the setupis.......computers-------ethernet router----ethernet wire-----router----modem.if i remove the switch in room b, then the computer in room b can communicate with the server computer, if i keep the ethernet router then i cant connect to my server. i need the computers in room b to be wired but there is only 1 wire in the room, so that is y i added the ethernet router. how can i get the server to connect to the computers in room b with the ethernet router?
My main wifi router is a Asus N66U
My ethernet router is a dlink dir 130
My computer has lost its wireless connection. where can I download the driver?
View 1 Replies View RelatedI have an ASUS Z77 Motherboard and when I install the AI Suite II which comes on the installation disc it blocks my internet connection. When I uninstall the software my connection is fine. I am using an Ethernet connection by the way. I think it is being blocked by the component called Network iControl. As soon as that component is uninstalled my Internet connection comes back. I want to have the software, but I also want to have my connection.
View 1 Replies View RelatedI recently moved into a larger 2 story house, and for the first few months I was using a Linksys E1000 I've had for about 2 years now. It's a fine single band router, but the people upstairs and the xbox/PS3 in the living room didnt have the strongest connection.
I shopped around and finally got a ASUS RT-N66U for a really good, strong dual band router that would supposedly give better range and performance than my old E1000.
Unfortunately, since I got it everyone is having issues they never had before, namely:Signal dropping all around the house and having to search for the network much slower performance than before the xbox/PS3 cant hold a stable connection even for a few minutes now, when before you could watch Netflix HD programs easily
I've upgraded the Firmware to 3.0.0.3.178 since I heard earlier firmwares had issues, but other than that and opening my ports for qTorrent it is relatively stock settings.
erro came with 3722------however after checking date and time i was able to login. AZAD
View 1 Replies View Relateddx error on skype freezes computer
View 1 Replies View RelatedWhen I try to connect to our domain I get the error message:Changing the Primary Domain DNS name of this computer to "" failed. The name will remain "(name of our domain)" The specified domain either does not exist or could not be contacted.The procedure is the same I've used since Hector was a pup and never had a problem. I can't add users to the domain and can't log on directly to the domain.
View 1 Replies View RelatedMy windows 7 computer was connected to my home's wireless network yesterday perfectly normally. I drove last night to my mother's house and proceeded to connect to her own wifi router wirelessly. Although my sister's computer that's on windows 7 connects ably, and both our iPhones connect, my computer will not. My computer finds the network( it is unsecured without a password if that makes a difference ) connects, receives an ipv4 address in ipconfig, yet does not obtain Internet access. It labels the network as an "unidentified network".
View 2 Replies View RelatedThe router 1841 is connected directly to the layer switch. the network diagram is below:
Office A --> Switch (L3) --> Router 1841 --> Internet --> Office B
However, when I transfer the file from Office A to office B, the speed very slow ( only around 40 kb/second), and there are an input error and CRC error:
Cisco-R1841#sh interfaces FA0/1
FastEthernet0/1 is up, line protocol is up
Hardware is Gt96k FE, address is 0019.e02f.03dd (bia 0019.e02f.03dd)
[Code]......
I'm trying to open certain websites but the browser gives me this message: "Network Error (tcp_error) A communication error occurred: "Operation timed out" The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time.
View 8 Replies View Relatedi'm currently studying at a college which has a website with a student intranet that is available to log in from any computer. So far it has been working well and I can log in on my home laptop and upload documents and look at presentations etc. Today for no reason when I try and log in I get the message Error Code 500: Internal Server Error and the webpage does no appear.I have had no problems previously and this has only happened today and yesterday, I went down to the college and accessed the website fine from the computers in the library but still no joy from my home computer.
View 1 Replies View RelatedI am with Virgin media (UK) and have the 20mbps fiber optic connection. My area has recently been having problems with the broadband and Virgin has recently fixed these problems. However I used to get around 19mbps now that the problem is fixed my computer which is wired to the router gets about 0.4mbps downstream... However the 5 wireless computers all get 16mbps which is pretty good for them. Windows tells me that its a firewall issue and I currently can't use two programs, spotify and steam. They both have firewall issues, even if I turn off my firewall which is the windows one. I also have avast, and when I turn that off, still no good. I used OpenDNS, stopped using that flushed my DNS, that didnt work. I tried to optimize my computer settings, by changing various values in Regedit.All of this has done nothing. I should add that I have recently re-installed Windows 7 so on this fresh install it has never had decent internet speed. Which I thought was weird.. I have basically had these problems since the fresh install. All of my drivers are up to date.
View 10 Replies View RelatedI have a netgear router, the pc I want to print from is connected via ethernet strait to router with Vista Ultimate OS. The computer the printer is hooked up to is connected via usb wireless adapter with Windows XP OS. Can I print from my computer hooked up via Ethernet from the computer that is hooked up wireless.
View 4 Replies View RelatedI just got a WAG160N-au, I run the installation disk, follow the procedures. I got the internet connection.
View 9 Replies View RelatedI noticed that my Asus RT-56U router feels really really hot. It's like the sidewalk on a hot day. I was wondering if it's suppose to be like that or if it's a problem i should worry about.
View 1 Replies View RelatedI am having the excact same problem, but I have an Asus F3l, which is only a couple of years old - shouldnt the drivers be valid - ie, hasnt WPA been around for some time?
View 14 Replies View RelatedI currently have a D-Link DIR-615 as my home router, but I've been underwhelmed with its range. Before I go switching stuff around. My D-Link is flashed with dd-wrt, and my RT-10+ would be as well.
My goal would be to increase the range if I could, but not at the cost of dependability. I almost never have to reset the D-Link, but I really don't have any experience with ASUS so I'm not sure where they fall in terms of quality.
So my setup has been built around playing nice with my Uverse Gateway. Basically the Router is hooked into a Lan port to the gateway and I have enabled DMZ-Plus to disable the firewall on the gateway's end. Wireless on the gateway has been turned off.
My issue is if I try and plus my Thecus N4100 pro into the router, it doesn't see it at all. The only way I can get my N4100 pro to work is to plug it directly into the gateway with my desktop pc and in that case the gateway wireless has been turned off only my desktop pc see's the nas...
It's definitely not ideal, and I am not sure what to do. I wanted to be able to use this router to do the bulk of the pc related things and only have the gateway handle uverse tv (WAP)...
For the Record: I have a Linksys E4200 Router.My computer is an ASUS Notebook (can't identify model, doesn't show on system information, but got it in the last 3 months) My friend's computer is also an ASUS notebook (model designed after a stealth fighter)First: On my computer, I get a solid 500kb/s dl speed at anytime. If anyone else is downloading, even if they are the only others to do so.. they get speeds of 150kb/s tops (on other laptops connected to the router). I don't understand how this is, all the settings on the router are default.econd (more important issue for me): My friends come over often and play games (WoW, Diablo 3, Xbox LIVE etc)... Often when we're doing something together, only my friend will disconnect, but none of us wille've updated his drivers (his computer is fairly new like mine is), among other things.. But he still has the problem, which occurs only at my hou
View 1 Replies View Relatedhow to sending out the wireless network from computer A to computer B if we used a lan network to computer A
View 12 Replies View RelatedI recently bought the above product, the ASUS USB N13 network adapter, and last night when i tried connecting to my wireless router, it worked, but I found that I could only get a maximum on 35% signal, where as my Acer laptop from 2005, receives upto a 100% signal. For a product thats rated at 150m range, distance should not be a problem, I have screen shot if required of the signal strength.
View 4 Replies View RelatedReaders Digest Version: Worked fine yesterday nothing has change in my connection settings, router settings or server settings. (Computer is located at work in an AD setup, I am first level IT Support here) Router shows as it is getting a connection from the network card which is a Realtek PCIe GBE Family Controller with latest drivers right from realtek (and asus version tried too). But is not connecting at 10/100 or 1000. (Have two connection sources to test to).
What I have tried:
- Tried it on a 10/100 router and a gigabyte switch
- Multiple cat5's
- Performing a clean uninstall of the driver and reinstall both from the Asus and Realtek websites of both drivers.
- Disabling the lan rebooting, enabling he lan and trying to connect.
- Disabling power save multiple times.
- Checking bios for any lan options (which there was surprisingly very little options)
- Latest bios firmware
- Tried changing the duplex to 10/100 for the hell of it!
May try:- Reinstalling windows. I had this problem a couple weeks ago, I went into the bios and enabled PXE boot when into windows and it was suddenly working as usual again. Went back to bios disabled PXE and it was still working fine. I did it again today to no avail....
when trying to connect it says nodhcpdiscover received sleeping
View 1 Replies View Relatedwhat is the router name for Asus F5RL
View 3 Replies View Related
