ASUS P5E3 Deluxe - 2 Ethernet Ports For Different Purposes
Nov 20, 2011
I have an ASUS P5E3 Deluxe motherboard and am having minor connection issues. Occasionally it will have trouble connecting to the internet....IMO, the traffic gets stuck as it attempts to send requests through the non-internet connected line. Here's how I have it connected, running Windows XP: It has a Realtek ethernet jack which is LAN 1 on the Connections menu and that line is connected to the router for internet. Typical set-up that automatically assigns IP address and all other options. It also has a Marvell Yukon connection (LAN 2) that connects to the server so that I can use the networked printer. I've assigned an IP address within the range of the settings on that router. The printer works. Is there a way to direct all internet or web data through one card so that the connection doesn't get bogged down? The server has no internet connection so I don't want any internet requests to go through the Marvell Yukon ethernet jack.
View 4 Replies
ADVERTISEMENT
Feb 11, 2012
just got the computer home and hooked up yo a gateway two wire dsl. new window 7. this mb was supposed to have a built in network. but i can't get it to connect to internet. isp says its the computer because it does not show up to them as even being hooked up. i keep getting error 651 and 638.
View 1 Replies
View Related
Feb 8, 2011
I am having an issue with my motherboard/ internet connection. when I am torrenting over a WIRED connection, my internet will randomly disconnect from the internet. my network will have the yellow triangle with the ! in the middle.
1. removed router from equation and still disconnects
2. tried different cable and still disconnects
3. tried reloading the OS from 64bit to 32 bit and still disconnects
4. downloaded latest drivers from realtek and still disconnects
5. tried wireless and it works fine
now i have onboard wirelessN as well as gigabit internet (everything is brand new). wireless works fine but that may be because it is not reaching the same speed/connections as my wired connection. im thinking its my onboard nic but it works fine unless I am doing heavy torrenting. i wouldnt mind wireless but this is an always on HTPC/server
View 1 Replies
View Related
Apr 24, 2012
Installed windows server 2008 and enabled wireless in the server manager but when I try to install any drivers for the wifi I get the error message "must install in windows 98 (SE), windows me, windows 2000, windows xp, win 2003, vista!"server 2008 uses vista drivers?
View 1 Replies
View Related
Jun 9, 2013
We have an ASA 5505. 5505 comes with two default vlans 1&2 with each of them marked as inside & outside respectively.My query is , if i do not want to use vlans on 5505 and only want to use the Ethernet ports as pure physical layer 3 ports, is it possible?i.e. i want to assign a layer 3 ip address on eth0/0 and eth0/1 and make them as the inside & outside interfaces rather than vlans. is it possible to do away with vlans in 5505 & will it work otherwise?
View 3 Replies
View Related
Mar 10, 2013
My TP-Link 8817 which is connected to my ASUS RT-N66u appears to be blocking my ports. I port forwarded on my router to set up a server. I do have the right IP and ports set up. Originally i thought it was the router but then "netMakeChannDial: err=-3000 rn_p=8050dc14" appeared in the modem log but nothing in the router log even though i turned on the "logged packets type" to Both. I have googled this error but nothing came up so I'm probably just doing something stupid. I have even tried turning off the modem firewall and SPI, but still no luck.
View 8 Replies
View Related
Dec 2, 2012
I have a client that is using an ASA5510 and would like to make some changes ,current config ,int 0/0 - external connection (T1) with multiple VPN site to site tunnels and VPN client tunnels ,int 0/1 Internal (10 network),Proposed config , add cable internet to int 0/3 , route default internet traffic to cable internet , leave VPN tunnels on T1 ,failover internet in the event of cable internet outage(using tracking) ,Would one or both of these options work? if so what is the better way to do it?
View 2 Replies
View Related
Mar 3, 2013
1. I recently purchased an Asus X53-sx1159v laptop (Windows 7 64 bit os - other detals at bottom ).
2. While it has a wifi network connection (which works fine), it doesn't seem to have any listing for ethernet (ie wired) connection. (even though it has the port for wired access.)
3. When i look under computer/device manager/networks, all i get is the wifi atheros 9485 network adaptor. There is no other listing. (see attched file for screen grabs)
4. Am i missing something obvious with all this? The Asus website has examples of this model with screen grab which includes an ethernet adaptor as well (see attached file)
Note that laptop is labelled as an X53 series but in the computer it get listed as a K53e
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, Intel64 Family 6 Model 42
[Code].....
View 7 Replies
View Related
Jan 16, 2011
Where do I find the Ethernet driver for Asus A7N8X-X?
View 1 Replies
View Related
Mar 30, 2013
So I finally got rid of the network cable across my hallway, yes it was faster, however It was ugly and I just didn't like it being there or having to cover it etc.
My attic makes a simple drop very difficult. I would need to cut into my plaster walls and hire a drywaller who knows how to work with plater to fix them, then re-paint my walls etc.
I always thought wireless N would be too slow to stream larger H264 files mkvs etc. So I bought a new ASUS Wirelss AC router, and AC network card.
I also bought some toplink 500mbps power outlet transmitters to test in the bedroom. This PC also has a ASUS PCE-N13 300MPS wirless card (150MPS upload), that was missing antennas. I borrowed some wireless g antennas fro some old routers to to test it out. For the Tp-Link Power Line adapters I tried 3 plugs that are all on the same braker, and in fact are wired off the same run.
Both living room and bedroom are pretty close to the office, with 2 walls (but also 2 door ways that line up through a JackNJill bathroom (so no walls?) directly into the bedroom. The living room has to go through one wall and around the hallway corner.
So the ASUS AC network card picks up the router at 833Mbps in my living room.
The ASUS PCE-N13 picks up at 150/133 Mbps in the bedroom.
The Toplink 500Mbps powerline adapter is shows as 100Mbps.
When plugging in the powerline adapters the Gig router it as a 100Mbps line too (Yellow light). Shouldn't this register as a Gbps line? How can they claim 500Mbps is they are only using a 100Mbps controller?!?!
[Code]...
So it seems like wireless N is working much better for me than the powerline adapters? I really like the hard line style of the adapters, but it concerns me that they are only detected as 100Mbps devices. How can they be detected as 100Mbps but claim up to 500Mbps? Should I send these back and try different powerline adapters? Or maybe I should just get another wireless Asus wireless AC card.
View 19 Replies
View Related
Feb 15, 2012
I have an ASUS X58C laptop which has been working OK to the internet via the ethernet cable but it has stopped working.I used the laptop via the wireless connection to access the internet while away from home and on my return I can not connect via the ethernet but I can connect OK via wireless. The results with the wireless enabled are :
C:>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection* 13:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
[code]....
I can see that the ethernet adapter(s) are shown as media disconnected but I don't understand how to make them connected. I also don't understand why there are two ethernet adapters or what the Tunnel Adapters are.Before I did the ipconfig command I went into Control Panel/Device Manager/Network Adapters/SiS Ethernet Controller, right clicked and selected the Update Driver Software which searched the internet for a driver and installed it.
View 7 Replies
View Related
Oct 17, 2011
I have the Asus P5QL-VM DO motherboard.On the Ethernet port the lights are not working and I can not get an internet connection.
View 1 Replies
View Related
Oct 24, 2011
Summary: Want to use a WRT54G cascaded behind existing DI-604 router to offer free wi-fi to guests. Need to keep guests on a separate subnet, and make sure their traffic is never routed to currently existing one (office PCs).
,__________________
......... WAN| |
|Cable- |.............| Router A |
| modem | (ISP-assig| (DLink DI604) |LAN
`.......' ned addr)`..................|192.168.0.1 (static)
| | |
| | |
| ,---. ,---. ,---.
| |.10| |.11| |.12| Office PCs
| |___| |___| |___|
[code]....
Tried above settings, with DHCP enabled for the new guest subnet. Using normal Gateway mode (i.e. re-NATting). Wireless guests can access the Internet, but also 192.168.0.x machines.Also tried, as suggested on several docs, disconnecting the WRT from the main network, resetting to factory defaults and setting up router from scratch, with the same result. It seems reasonable that, by default, things are set up in such a way that the new subnet can share resources with the existing one; however, I need the contrary and can't seem to get it right.BTW, as soon as I enter the static IP and default gateway for the WAN interface I see new default entries appearing on the static route table (Adv Routing / Show Table) for 10.x.x.x to 192.168.0.x routing. I suppose that this is necessary for the router itself, as a member of both, to be able to perform NAT and gateway through the upper tier -- since I can't seem to delete these entries manually, anyway.Considered using Router mode, but if I understand correctly, that would disable NAT, which seems (to me) inconsistent with the "separate subnet" requirement, since the main router would need to NAT guests as well as employee PCs (which would imply using one subnet for both, right?). Considered adding a firewall rule at the WRT, but the firmware does not seem to offer a suitable feature. There are "Filters", but those aim at restricting Internet access (which I want to allow), or to a certain range of ports, or even search keywords -- but not to a range of *hosts*.Tried filtering out guest-to-LAN traffic at the main router, but this proved nontrivial to get working (probably due to NAT-within-NAT which, other than that, works fine). It sounds a bit silly, anyway, I mean, why route this kind of traffic only to filter it out later on? I'd rather not route it at all in the first place. Can that be avoided? How?
View 9 Replies
View Related
Nov 4, 2011
I have setup an Asus RT n16 with 3 computers that support gigabit ethernet and a media server on one floor. On the other floor I have set up a fast ethernet switch (connected to my asus router) which is connected to several fast ethernet enabled computers.
Would the fast ethernet devices slow down the entire gigabit networking to 100mbps connections on my floor - similar to how a wireless n network running at 300mpbs must slow down to 54mbps when a wireless g device is connected to it?
View 6 Replies
View Related
Feb 1, 2011
My ASUS P5KC is not installing/using the Attansic Ethernet drivers correctly. I'm running Windows 7 64-bit Ultimate and I'm using the Vista 64-bit (since those are the only ones available on the site that match). I install the drivers, reset, the network icon shows up in the bottom righthand corner with an X over it. When I click troubleshoot, it tells me that a network adapter needs to be installed. I check the device manager and there's no network adapter there.
View 1 Replies
View Related
Feb 10, 2013
I have a P7H55 Asus Motherboard with the ethernet port and cable working fine individually. However, when i connect them together,the ethernet light on the router remains stable as if connected but still the desktop shows not connected. This time i have installed the drivers which came from the motherboard manufacturer and are the latest. In the Network and Sharing Center, the icon is enabled. It does not show cross sign.
View 10 Replies
View Related
Feb 25, 2012
My internet service grinds to all but a halt as soon as I plug in the ethernet cable to my desktop. Nothing is running in the background (that I can determine). Nothing is spamming data up or down (that I can determine). I get 40ms ping and 12Mbps downloads on every device I have until I plug in my big boy; then all the speeds come crashing down to 600ms ping and 0.9-1.4Mbps downloads (including the desktop, I have not been able to play SWTOR for weeks now). It's not the provider, (I thought it was) but I switched from Time Warner to AT&T with the exact same results. ASUS P8P67 Pro; I've had funky issues with USB ports and one SATA port died. Other friends suggest I may have an awful bug and I need to wipe and start over. I wouldn't mind doing that, but I don't have a windows recovery disk (my copy is legitimate).
Mobo-as listed.
CPU- i5-2500k stock, not clocked
RAM- 16GB G.Skill Ripjaws X DDR3 1600
View 5 Replies
View Related
Feb 14, 2011
I'm looking (LAN) driver for Win Server 2003 for the MAXIMUS motherboard of ASUS for the lan card
View 1 Replies
View Related
Nov 15, 2011
When i was looking for a wireless card, everyone seemed to be having connectivity issues with all of these cards, and i regularly have interference issues when the microwave is used which completely knocks off my connection. How to connect a second router as i have a telephone port in my room so i am able to connect my PC/PS3 via ethernet. Just some basic info, I'm on the O2 wireless network using their Thomson router, and i also have a Bt Homehub 2 lying about for some reason.
View 2 Replies
View Related
May 31, 2011
my house has 4 ports in each room, 2 coaxial, 1 for the net, and one for a TV, and there's a phone jack and a Cat5e Ethernet port. From what I have learned, all my ports lead up to a "closet", and I have found it. It has all the connections for the LAN, and everything else. I am confused on what to do next. I see that there are blue Ethernet cords connected to the ports on one side, and that they are not connected to anything on the other. I thought I had to buy a switch for all these ports, and I haven't done so yet. where am I supposed to connect the modem to the internet. It is currently connected to the internet coaxial port, which it then connect to the VoIP switch, and is then connected to everything else. Where is the coaxial port that I have to plug it in to, and what is it labeled?.
View 1 Replies
View Related
Feb 8, 2013
i've tried plugging in various devices (computer & solar panel management device) into the ethernet ports to no avail. i just updated the firmware, reset the router, and still no luck. all of the lights work when i reset and the wifi works fine. do i need to do something in the settings to turn on the hard connection?
View 3 Replies
View Related
May 9, 2012
If I hook up a wireless router as an access point will both the Ethernet ports and the wireless connection on that router work?
View 2 Replies
View Related
May 1, 2013
I have a Cisco 1841 that has an ADSL (ATM) card installed. It was previously used with an ADSL line to provide NAT routing for an office. Now I want to use it witha cable modem, which would mean abandoning the ADSL interface and instead routing between the two Ethernet ports.Between the Cisco and the LAN is a Linux transparent proxy. It provides routing between 192.168.1.0 (LAN) and 192.168.2.111 (Cisco LAN interface). The network looks like this:
Cable Modem(174.76.21.1)(gateway) --- (174.76.21.10)(WAN) Cisco 1841 (LAN)(192.168.2.111) --- (192.168.2.11) Linux Proxy (192.168.1.10) --- (192.168.1.0) LAN
For testing and diagnostics, I've connected a laptop to each FastEthernet port on the router. One laptop is configured with the IP 174.76.21.1 to simulate the cable modem gateway and the other laptop has the IP 192.168.2.11 to simulate the Linux proxy. From those systems I've performed the following diagnostics with the following results:
From 192.168.2.11
Ping 192.168.2.111 - OK
Ping 174.76.21.15 - OK
Ping 174.76.21.1 - Timed out
From 174.76.21.1
Ping 174.76.21.15 - OK
NAT translation to LAN IP's failing
There are some vestiges of the ADSL configuration, but I've cleaned most of it out and shut down the ATM interfaces. Here's my config:
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
[code].....
View 5 Replies
View Related
May 7, 2012
i would like to "team" two ethernet ports on a 2921 router into a single redundant link to a switch, similar to how an HP server teams multiple NICs to a single IP address. is port-channeling the best/only way to do this? i don't necessarily need the two links to be load balanced or bonded, considering the serial side of this router is just a single T1. i just want the links redundant, so in case something goes wrong with one cable or switchport, traffic will go over the other link.
View 6 Replies
View Related
Mar 6, 2013
how the ASR1000s are being setup.I am looking at ASR1000s as part of network refresh and was looking at RJ-45 based Gigabit Ethernet ports compatible with the ASR1000s SPA-5X1GE-V2 seems to be an option but they are all SFPs. Are there any options for RJ-45 ones on ASR1000s?
There is an option for the 2 port where one can mix and match SFPs and RJ45 but I was looking for something which is RJ45 only.Are there any options for them available.I know I could get something with FastEthernet type but was looking for the GigabitEthernet type.
View 4 Replies
View Related
Oct 27, 2012
I have Sky Fibre Optic Broadband, with a router supplied by Sky, (You can't use any other router, as username/password for internet is already put into router & they will not give you details when you phone them). The router they supply has only four Ethernet ports on. One is used by Sky to give you Fibre Broadband, thus leaving you with three.I have five devices that must use Ethernet, as they do not have wireless.How do I get more Ethernet ports available to use, without losing the Sky router, as Sky will NOT let you use any other router.
View 10 Replies
View Related
Jun 20, 2011
It is a 2wire with 4 Ethernet ports and wireless capability. I have a pc and xbox connected via Ethernet and a laptop and smartphone connected wirelessly. The problem is that my router randomly completely shuts off/resets itself causing me to lose connection. This happens both when things are in use and not in use.
View 3 Replies
View Related
May 2, 2011
How many routed ethernet ports do they support when using HWIC-1FE and HWIC-2FE modules? On the Cisco site for the two interface modules and in the corrseponding PDF of supported interfaces for 29xx routers a maximum number of 2 2port modules(HWIC-2FE) and 2 1port modules(HWIC-2FE) is written.Does this mean, that I can put in 4 L3 HWIC modules into one Cisco 2921 router by combining these two HWIC modules resulting in a total number of 7 interfaces for this router?
View 3 Replies
View Related
Dec 22, 2011
I want to purchase CISCO2901-SEC/K9 let me know all its specification and how many Ethernet ports supported by its modules?
View 1 Replies
View Related
May 2, 2012
I have a Cisco 2600 series with 2 X Fast Ethernet ports and I would like to configure the cisco to perform the task if it is possible.The scenario is:
2 networks:
F0/0: 192.168.x.x
F0/1: 10.1.x.x
No communication between them except one way multicast from F0/1 to F0/0.
View 1 Replies
View Related
Feb 1, 2011
I have the Linksys WRT54G Wireless Router, when i hook my at&t modem to the modem port on the router the wireless portion of the router works, when i plug any pc into the Ethernet ports it doesnt work!If i plug the modem into the Ethernet port and plug other pcs into the other existing Ethernet ports it works by Ethernet but not wireless.
View 1 Replies
View Related
Jun 13, 2012
I have a DAP-1522 in my den that I am connecting as a bridge to a Netgear WNDR3800 that in turn is connected to a cable modem in my living room. I have multiple PC's connected to the DAP-1522 via the Ethernet Ports. All the Ethernet connected PC's are getting IP addresses from my Netgear WNDR3800 via DHCP and can access the Internet fine. The weird thing is the PC's connected to the DAP-1522 through the Ethernet ports can't see each other - they are isolated from each other. I can see the DAP-1522 hard wired PC's from a laptop connected wirelessly through the Netgear WNDR3800 but the PC's wired to the DAP-1522 can't see each or communicate to each other via IP, though they can communicate to anything else on the Netgear WNDR3800 wireless network or Internet.Only the PC's connected to the DAP-1522 via the Ethernet ports are isolated from each other. Very strange. This is a problem because I have a NAS device I want to connect to the DAP-1522 that will be shared by the PCs in my den. I do software development and want access between the PC's and NAS device at Ethernet Gigabit speed. I am using default configurations for the DAP-1522. It appears that firmware for the bridging function if funky. I am on firmware version 1.41. The hardware release is A1.Not sure if it is an issue with the DAP-1522 or the Netgear WNDR3800.
View 5 Replies
View Related
Aug 10, 2011
enabling traffic between interfaces on the ASA 5510. Of course I have an outside interface E0/0 and an inside interface (E0/1) for normal operation. The idea was to enable one of the remaining interfaces on the 5510 to attach an internal network resource to for management in case we lost our switch. I am using E0/0 as the outside interface and the inside interface is E0/1. I am wanting to attached a management device on the same inside network IP address range for simplicity. I have E0/2 configured for the same security level (100) as the other inside interface and I also have enabled same-security-traffic permit inter-interface as well but I still cannot access the device on that port. Is there something else I am missing? I guess the best way to explain this is that I want ports E0/2 and E0/3 to act like a "switch" so to say...... The ASA 5505 lets you do this pretty easy but having trouble on the 5510.
View 4 Replies
View Related
