Why do I have to restart my computer to connect to the internet? I've had this problem for about 4 months now and I don't know what it is. If I leave it idle at anytime and come back, I have to restart the computer to connect.
View 2 RepliesI have a Dell Vostro 3460 laptop with Windows 7, 64-bit. My wireless driver is Dell Wireless 1704.802.11b/g/n. I just got this computer in December, and it worked fine for a couple of months, then about a month ago, I started having these problems.
Whenever I turn off or put my computer to sleep and turn it back on, my wireless connection doesn't work. The wireless indicator light on the front of the laptop is not on, and I push the FN+F2 button (which is supposed to turn on wireless), but it does nothing. I checked under the device manager, and the wireless adapter is not there.
After the first time I ran the diagnostics, I reinstalled the driver. The I restarted the computer, and the wireless was working. However, that night I turned of the computer, and when I turned it back on the next morning, the wireless was not working again.Other things I have discovered that sometimes work as a temporary fix:
Sometimes, if I wait 5 or so minutes, the wireless indicator light will come on, and then I can restart my computer and connect to a network, but most of the time, I can wait for hours and it never comes on.If I start in computer into safe mode or the BIOS screen or diagnostic screen, sometimes the wireless will start working after I exit that mode and start into normal operating. For example, one of the times that I ran the PSA diagnostics, the wireless started working afterwards, but stopped working again the next day. Another time, I started the computer in safe mode with networking to see if that would work, and the wireless did not work while I was in safe mode, but then I restarted the computer in normal mode, and the wireless came on.
One time, I went under Device Manager and did "Scan for Hardware Changes." After that, the wireless indicator light came on, and I restarted the computer and was able to connect to a network.However, all of these solutions were temporary, and some of these solutions only work one time but not again.I called Dell Support a couple of weeks ago, and they said that my antivirus program might be stopping the wireless driver from starting up. I have Trend Micro, which came with the computer.
I went to go turn on my computer and it stopped at the loading screen where the blue square things are and I think it says windows seven with the flag above the loading bar.So I turned it off then back on and it flashed acer then a thing came up that apologized for the incomvience blah blah blah my computer waas shut down and I choose an appropriate actioan.It says safe modes which I clicked on then a bunch of stuff came up and it didn't do anything so then I just went to start windows normally.It went to the loading screen again then it just restarted the whole thing.
View 3 Replies View Related I have a peculiar isse, when I try to configure the controller dsl interface on 878, it starts restarting, it is actually running the latest IOS , here's the output.
Router(config-controller)#mode at
Router(config-controller)#mode atm ?
<cr>
[Code].....
I'm having an issue with my wireless router and I don't think it's normal. Basically, I would be on my computer or laptop, generally browsing the Internet, and all of a sudden the Internet will stop working. A small yellow exclamation mark appears beside the wireless icon in the system tray. In order to resolve this, I go downstairs and turn the router off and then turn it back on again. When the router loses the connection, the light on the router goes out (the one that says Internet), yet everything else is on as it should be. Restarting the router seems to fix this problem. I just can't understand why I have to do this at home when the wireless router at work never has an issue. It's literally on 24/7 and handles everything from laptops to iPhones and even iPads.
Is this normal for my router? I had this exact same issue with my previous one and so I ended up buying an N range router (the last one was G). The guide book says that you shouldn't ever turn it off as that could cause problems, but whenever it loses the Internet connection, I'm forced to restart it in order to get the connection back.
my laptop is re-staring when access the server
View 1 Replies View RelatedI am facing a issue on Cisco 3845 router, IOS is :c3845-adventerprisek9-mz.124-22.YB8.bin
I have changed the IOS as well as the Hardware but again the router is restarting. I have put the show tech-support and crash-info in Output interpreter, result is below:
ERROR MESSAGE NOTIFICATIONS (if any)
%PAR-1-FATAL (x): [chars]
Explanation: A parity error has occurred. The problem might be caused either
by a motherboard that has failed or motherboard settings that are incorrectly
set.
[Code].....
We have an ASA5505 that seems to be randomly restarting. How can I troubleshoot this? Is there a log file somewhere that tracks hardware issues like this?
View 6 Replies View RelatedThis is a Sony Vaio E series laptop running Windows 7 that I've had for close to a year now. The problem began about two days ago with the wireless connection getting dropped randomly (no signals found). The first few times it happened I ran Troubleshoot and it fixed itself, and picked the connection back up. Yesterday when it happened again the troubleshoot failed. I check my router connections, reset it a few times, checked my other computer's connections (all fine) then finally tried restarting the laptop. When it came back up it connected to the internet again. This has since happened three times, and each time I have to completely restart the laptop to get the wireless signal back.
View 3 Replies View RelatedI bought this Tenda wifi router and connected it.It's a chinese one and the user interface is not much friendly. It works fine but sometimes if u play around with it u will lose the settings you inserted in to it and you will need to reconfigure it.
My problem is my ISP seems to renew the IP's issued to their customers automatically every 10 hrs from the last login. But every other router keeps the connection alive but my router doesn't. It needs to be restarted in order to get the internet back online.simply said,u need to restart the router every 10 hrs.
BTW Never buy Tenda routers.
I have Thomson Tg585 v7 router, when trying to add new game application to set the ports for GW2 my router just restart by it self, and i can't add the application even if i do it fast it won't take any name i try for it,even tho i did add ports for BF3 like 2months ago and it worked fine.
View 1 Replies View RelatedAs soon as I set it up it would keep restarting every 3-5 minutes. It would sync with the ADSL line, wireless ok and then boom restart again.I've tried every singe setting, googled the problem, updated the firmware to the latest and still no luck.Then I had it replaced today with a new one and I faced exactly the same problem so I am thinking that eitherI am completely useless (which I would like to think I am not) or I got stuck with a batch of faulty X3000.Currently I am on linksys WAG200G that has been working non-stop for ages and the only reason I upgraded is that I wanted faster streaming.
View 9 Replies View RelatedI have an E1200 wireless router. I need to restart it every 1 to 2 days. After restarting it is good until the next time. This has happened with different routers and upgraded firmware to the newest version available on all.
View 1 Replies View RelatedI used to have a Thomson st-330 USB modem for my ADSL network. When I wanted to change my IP i just disconnected and reconnected a dial up connection that does the job instantly! (a wan miniport + a batch file to disconnect/recoannect with my password and username)Few days ago i bought a new modem/router (TP-LINK TS-W8951NS)Before that all I knew was that if I wanna change the ip address (if I have a router) was a batch file with commands ipconfig /release/renew.I now know that this changes the ip of my PC not the global IP! So how would I change it without restarting the router? (When i change something in my router interface page (PVC1.2.3....etc) my IP changed instantlybut how do I do this without accessing the router, like commands and a batch file etc? I just found out that my global IP changed on its own after like 30-60 min :S why is that! and to do so manually???
View 2 Replies View RelatedTwo issues with WRTP54G
1.) when making changes and restarting the router I am unable to get web pages (wired port or wireless) or web response from the router, despite re-entering the URL (192.xxx.x.x). I *DO* get a dialtone (VoIP). To get router restarted I have to get my lazy arse up and cycle power to the router. Like I said, a nuisance.Configured for WPA2 Personal security with MAC Wireless Filtering (9 MACs)
2.) Adding a 10th wireless device to the filter table and the MAC 10: becomes duplicated in MAC 09: while the existing MAC 09: disappears. Finally got it to accept my new device but now I have 2 devices repeated in the MAC Filter Table. Not a clean setup.
I have a WRT160N v3. After a power outage yesterday the system keeps restarting in a cycle.
View 1 Replies View RelatedCan not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.
View 8 Replies View RelatedFor some reason, I can see the wireless connections on my laptop but not on my Dell Computer. When ever I try to connect on my computer i see no wireless connections at all, i have A wireless USB adapter that use to be on put in the back and recieved wireless connections in the past but now it doesnt, I try the front ports, and nothing works except for one, but that one port doesnt work for some reason, the same thing happens, no connection at all.
View 6 Replies View RelatedGot a sky hub, its new and everything connects to it, all be it but one tower, it can find it and now and again it may conect with no or limited etc etc had the same problem with our last internet hub (BT) so its defo the computer as we also changed the Netgear USB adapter to a different tower unit and it connected, so it isnt the Sky hub and it isnt the wireless dongle. computer is running vista, i have disabled the security and it didnt work, i have uninstalled and reinstalled the software for the usb dongle a hundred times.it did once connect to the net this morning in my many attempts of fiddling and after the computer restarted it wont anymore. a medium strength moderately priced pint of your choice is the reward, subject to location and availability
View 8 Replies View RelatedI used to be able to type in the numeric url it no longer works, and errors "can't connect"
View 1 Replies View Relatedput clear on more than one computor at a timei have been trying to have clear on my other computor and my kindle fire
View 1 Replies View Relatedi have two computer and a dsl.why i am connect both computer at a time.
View 1 Replies View RelatedI have a laptop using a wireless Ralink USB card to connect to the internet. Is it possible to use the unoccupied Ethernet cable slot to hardwire into a router and use the router to send out the wireless signal picked up by the USB card to other devices?
View 1 Replies View RelatedI recently changed my wireless router settings to accommodate an old computer running Windows XP that did not have the WPA2 security capabilities. I changed the security settings on my Netgear router to WPA and TKIS. I also have several other devices (tablets, readers) and three other computers all running Windows 7. I had no problems with the settings on all but one of the Windows 7 computers. I am absolutely certain that I have entered the security information correctly just as I did on every other device, but this one computer says, "the settings saved on this computer for the network do not match the requirements of the network".
View 8 Replies View RelatedHow to connect to LANs from one Computer Answer of : How to connect to two different LANs from one Computer with two LAN Cards :with 16 Port Switch in My Computer lab.
View 1 Replies View RelatedRecently my computer has been unable to connect to a certain website. (cevo.com) I've deleted my cookies, tried different browsers, tried changing my MAC address, and still nothing. I've run several virus scans and tried connecting to the website on different computers in my home. It works on those computers. The website just won't load at all on my computer. Also, a program that must connect to the website to function properly won't work on my computer anymore either. I can connect to the website using a proxy site, but I still need to get this fixed.
When I ping cevo.com, this is what I get:
Pinging cevo.com [50.56.5.59] with 32 bytes of data:
Reply from 50.56.5.59: bytes=32 time=50ms TTL=46
Reply from 50.56.5.59: bytes=32 time=49ms TTL=46
[Code]....
Also, I plugged my computer directly into the modem and it still didn't work.
So I bought a new computer an Acer AX34703-ESTOP I don't know if that sais anything but anyways I was trying to connect to my internet which who would be listed and works fine on all my other products but my internet has a password and when I would click on it while listed it would say : Windows Was unable to connect to ..... Network and it would'nt even ask for my password
View 1 Replies View RelatedI am setting up two identical workstations at the company I work for. They are both brand new HP computers running Windows 7 64 bit. I set up one computer fine and added it to our domain. I tried connected the second computer and I can add it to the domain but for some reason it says "No Internet Access". I can ping our server and anything else on the network, but any website I try won't come up.
Most of the related issues I've searched for were all viruses but since this is brand new and has never been online that is not the case...unless an HP tech decided to play a cruel joke of course!
Could it be the network card? I didn't think so since it connects locally but who knows. I also disabled and enabled, took our sonicwall down and tried to obtain settings automatically, nothing works!
new HP 2000 computer he just purchased. I brought it to my house to set it up. No problems connecting to wifi at my home. Downloaded all the updates and got it ready for his house. When I tried connecting to his network, it kept giving me the network key. I know I was entering the correct information because we had his older computer and I copied the exact thing. I had also made a folder when I set up his other computer with his information for his network in it and I was going by that. I tried to automatically connect and I also tried to manually connect. I deleted the name of my network (that worked) and rebooted. It continually gives me the block to put the password in. I brought it back to my house and the wifi connected with no problems. His old toshiba had no problems connecting to his network. I disconnected it and reconnected it. Is there something about the settings I am not doing? Or is it a firewall setting? Is there something in the modem that is conflicting with the new HP. It's a WAP2 Personal with AES Encryption (did not work on that one), where as my network is a WPA Personal with TKIP Encryption (worked on this one). Will that make a difference and if so what do I do about it?
View 4 Replies View Relatedthe internet connection to my computer was fine. Nothing wrong with it at all. I turned my computer off and went to bed. When I woke up the next day morning and turned my computer on, there was no internet connection. I turned my computer back off and went to school.I tried unplugging and plugging the Ethernet cable back in, but it will no longer connect with the Ethernet cable. I have managed to get it to work wire lessly.
View 17 Replies View RelatedMy computer will not connect to the internet, it was working fine then all of the sudden disconnected, I have tried all the basic things like restarting the modem and using a different Ethernet, but none of those worked, so I am convinced that the problem is with the computer itself. I have it set up so that my netbook(which I am using right now) is wirelessly connected to the internet, and I have a ethernet cable going from the netbook to my desktop, giving the desktop internet(until it had this connection problem). I am using windows xp professional, and I have spent a lot of time browsing to try and fix the problem, but so far it is to no avail. First I'll start by saying when i try to repair the connection it comes up with the message " the following steps of the repair operation failed: renewing the IP address" I tried using ipconfig /release then ipconfig /renew, but when I do this it says "an error occured while renewing interface local area connection: unable to contact you DHCP server. request has timed out" when I type in "ipcofig" it says my IP address is 169.254.xxx.xx, after researching more i found out that this is bad, but when i try to renew to get rid of it it gives me the "unable to contact DHCP" message. I even tried reformatting with a different windows disc but the connection problem still persists.
View 14 Replies View RelatedPut bluntly, my laptop will not connect to any ftp site/server via any of the following methods:Command Line Software FTP Clients (Filezilla and other such programs) Windows Explorer (window) Browsers
However, if I try to use a WEB-BASED client, I am able to connect without a problem. What's stranger, if I try to connect to the same server on a different computer using the same wireless network (I'm running on Wifi), that computer has not problem connecting to the FTP server via all the methods mentioned above. So that should at least eliminate the wireless network itself from the list of possibilities.
And to the best of my knowledge it has nothing to do with the firewall as I've made every possible setting tweak to allow ftp connection in and out - I've even turned off the firewall and antivirus with no luck.
Which is why I have reason to believe it has to do with my laptop itself.
i want to get rid of cable and just use netflix, but have 4 tv's in my house is there any way to have it hooked up so i can watch different shows on each tv.
View 1 Replies View Related