Tenda Wireless Router Needs Restarting Each 10 Hours?
Oct 8, 2012
I bought this Tenda wifi router and connected it.It's a chinese one and the user interface is not much friendly. It works fine but sometimes if u play around with it u will lose the settings you inserted in to it and you will need to reconfigure it.
My problem is my ISP seems to renew the IP's issued to their customers automatically every 10 hrs from the last login. But every other router keeps the connection alive but my router doesn't. It needs to be restarted in order to get the internet back online.simply said,u need to restart the router every 10 hrs.
BTW Never buy Tenda routers.
View 3 Replies
ADVERTISEMENT
Apr 2, 2013
I have an E1200 wireless router. I need to restart it every 1 to 2 days. After restarting it is good until the next time. This has happened with different routers and upgraded firmware to the newest version available on all.
View 1 Replies
View Related
Mar 14, 2012
Two issues with WRTP54G
1.) when making changes and restarting the router I am unable to get web pages (wired port or wireless) or web response from the router, despite re-entering the URL (192.xxx.x.x). I *DO* get a dialtone (VoIP). To get router restarted I have to get my lazy arse up and cycle power to the router. Like I said, a nuisance.Configured for WPA2 Personal security with MAC Wireless Filtering (9 MACs)
2.) Adding a 10th wireless device to the filter table and the MAC 10: becomes duplicated in MAC 09: while the existing MAC 09: disappears. Finally got it to accept my new device but now I have 2 devices repeated in the MAC Filter Table. Not a clean setup.
View 1 Replies
View Related
Dec 30, 2012
I got a new Tenda W311R+ Wireless-N Broadband Router yesterday. I already have a wired broadband internet connection in my home with a Beetel 110TC1 modem. I did following:
1. Connected the Beetel modem to the Tenda router using an Ethernet cable
2. Connected the Tenda router to my PC using another Ethernet cable.
3. Went to 192.168.0.1 (as mentioned in the instructions sheet which came along with the router)
Now, what should I set as the access mode, ADSL Dial-up or DHCP? Are there any other settings I should change in order to enhance the speed? I have Windows XP SP3. Also, do I need my Beetel modem or can I use the router without it?
View 5 Replies
View Related
Apr 18, 2012
I have a WRT160N v3. After a power outage yesterday the system keeps restarting in a cycle.
View 1 Replies
View Related
Dec 12, 2012
How do i have reset my trenda router without a disk?
View 3 Replies
View Related
Aug 20, 2011
can i set up my W311R+ tenda wireless router without the software driver?
View 1 Replies
View Related
May 8, 2012
how do i reset my password for y tenda wireless router w311r
View 1 Replies
View Related
Jul 13, 2011
I am trying to set up a Tenda 150mbps wireless Ap/Router.Im trying to set it up to use it as a range extender.I followed all the directions. I put it in wisp mode. It doesnt seem to be communicating with my Tenda wireless router. It only is showing up as its own connection. so I cant even get on the internet.
View 1 Replies
View Related
Feb 8, 2013
I'm having an issue with my wireless router and I don't think it's normal. Basically, I would be on my computer or laptop, generally browsing the Internet, and all of a sudden the Internet will stop working. A small yellow exclamation mark appears beside the wireless icon in the system tray. In order to resolve this, I go downstairs and turn the router off and then turn it back on again. When the router loses the connection, the light on the router goes out (the one that says Internet), yet everything else is on as it should be. Restarting the router seems to fix this problem. I just can't understand why I have to do this at home when the wireless router at work never has an issue. It's literally on 24/7 and handles everything from laptops to iPhones and even iPads.
Is this normal for my router? I had this exact same issue with my previous one and so I ended up buying an N range router (the last one was G). The guide book says that you shouldn't ever turn it off as that could cause problems, but whenever it loses the Internet connection, I'm forced to restart it in order to get the connection back.
View 14 Replies
View Related
Jun 8, 2011
I am facing a issue on Cisco 3845 router, IOS is :c3845-adventerprisek9-mz.124-22.YB8.bin
I have changed the IOS as well as the Hardware but again the router is restarting. I have put the show tech-support and crash-info in Output interpreter, result is below:
ERROR MESSAGE NOTIFICATIONS (if any)
%PAR-1-FATAL (x): [chars]
Explanation: A parity error has occurred. The problem might be caused either
by a motherboard that has failed or motherboard settings that are incorrectly
set.
[Code].....
View 1 Replies
View Related
May 21, 2012
I cannot connect wan using tenda router, lan connection works.
View 1 Replies
View Related
Dec 4, 2012
I used to have a Thomson st-330 USB modem for my ADSL network. When I wanted to change my IP i just disconnected and reconnected a dial up connection that does the job instantly! (a wan miniport + a batch file to disconnect/recoannect with my password and username)Few days ago i bought a new modem/router (TP-LINK TS-W8951NS)Before that all I knew was that if I wanna change the ip address (if I have a router) was a batch file with commands ipconfig /release/renew.I now know that this changes the ip of my PC not the global IP! So how would I change it without restarting the router? (When i change something in my router interface page (PVC1.2.3....etc) my IP changed instantlybut how do I do this without accessing the router, like commands and a batch file etc? I just found out that my global IP changed on its own after like 30-60 min :S why is that! and to do so manually???
View 2 Replies
View Related
Feb 18, 2012
How can i apply password on tenda router?
View 1 Replies
View Related
Sep 29, 2011
Iv got tenda router that is connected to the internit but it cannot recognize the othe wan devise type livel one which is connected throgh wire to the wan router?
View 1 Replies
View Related
Oct 27, 2012
how to disable firewall on w302r tenda router?
View 8 Replies
View Related
Dec 29, 2012
Tenda router w311r forgot password
View 3 Replies
View Related
Aug 29, 2011
need to disable firewall settings router Tenda D840R
View 2 Replies
View Related
Sep 24, 2012
This is a Sony Vaio E series laptop running Windows 7 that I've had for close to a year now. The problem began about two days ago with the wireless connection getting dropped randomly (no signals found). The first few times it happened I ran Troubleshoot and it fixed itself, and picked the connection back up. Yesterday when it happened again the troubleshoot failed. I check my router connections, reset it a few times, checked my other computer's connections (all fine) then finally tried restarting the laptop. When it came back up it connected to the internet again. This has since happened three times, and each time I have to completely restart the laptop to get the wireless signal back.
View 3 Replies
View Related
Oct 12, 2011
i have tenda ADSL router using the internet of Nepal Telecom, Nepal and distributed to two users. now i want to limit the speed of the other user to least and i want to achive maximum speed of the subscription but have no idea to manage it
View 1 Replies
View Related
Nov 3, 2012
i have lost my code from the tenda wifi router modem which we can use to put security.without it how to secure wifi?
View 1 Replies
View Related
Sep 13, 2011
I've needed to power-cycle my router every 2 hours. Usually it can last 2 weeks before needing to power-cycle (a process I've done for the past 2 or 3 years). This actually happened before for me a couple of months ago, but I did a firmware update along with a reset, and it looked like everything went back to normal.
But last Saturday I had to power-cycle it twice, then it didn't have any problems all day Sunday. But yesterday it went back to needing to be power-cycle it every 2 hours. My computer is physically connected to the router and is working perfectly no problems at all. But my parents use the wireless for their PC and laptop, and I use it for my 360, PS3, and Wii, so having to power-cycle it every 2 hours would be a pain.
I was wondering if this is a sign of the wireless in my router dying and in need of a new one, or is there some possible fixes I can do in order to repair it.
Mixed Mode
Wireless Channel 1
No WPA (Something I'm planning on fixing)
View 3 Replies
View Related
Nov 4, 2012
I got my new comcast connection and using CISCO DPC3008 cable modem and EA6500 Wifi Smart Router. Internet works fine and then suddently the internet goes away. Further investigation shows EA6500 Wifi router just reboots every few hours and then wifi devices don't reconnect like it used to do with previous routers.
View 6 Replies
View Related
Feb 8, 2013
I used to use a DSL modem/router supplied by Bell (my ISP) and it was a 2wire router, but the signal was not enough to supply my entire house, it was 802.11b/g.Now recently I bought a Tenda W307R, N router all-in-one with an AP.I just plugged it right into the 2wire (modem) and now the Tenda routes the wireless signal. However, I am experiencing that it slows down every few minutes or so, for 30 second intervals, then the internet catches on again and everything is good.
View 2 Replies
View Related
Feb 8, 2013
i have wimax usb modem and tenda wifi router with rj45 ports.
View 5 Replies
View Related
Oct 21, 2011
I have a Cisco Linksys E1000 wireless router. It has been working perfectly for the last few months until yesterday when I noticed none of my wireless devices could connect. The SSID was still being broadcast and my computers that were connected through an ethernet cable were still able to access the internet fine. Eventually I pressed the red reset button on the back of the router, which reset my router name, password, etc. I set everything back up and was able to connect again. Several hours later the wireless stopped working again. When I launched the Cisco Connect software I was prompted to update some software (possibly the router firmware) so I did that. After that I was able to connect to wireless again. This morning I woke up and wireless was not working again. This time I changed the password for the router and then I was able to connect to wireless again. I tried to change the router password back to the original password and I couldn't connect anymore. When I changed the router password back to the new password I could connect again.
View 1 Replies
View Related
Aug 6, 2012
The Port 80 port fowarding stops functioning after a few hours and requires the router to be rebooted to start forwarding again. The firmeware is the latest 1.0.04 Build 7. I require it to operate reliably for many days without intervention. I assume that it is a port forwarding problem because I can access the IP on my network from within my network even when I can't access it from outside my network. I am using the correct IP addresses as it sometimes works OK. A characteristic is that when I can't access the page it loads as completely blank white with no error message.
View 2 Replies
View Related
Dec 4, 2012
I have a Linsys E3200 router for almost a year. It's been working fine until recently. It kept losing internet connection every a couple hours or even shorter. I have to power cycle the router in order to make it to work. However, sometimes that won't work either. I also tried to restore the router to the factory default but that doesn't seem to work.
I have updated the router with the latest firmware (1.04). I am using a cable connection and it never gives me any problem if I just connect my computer to it. I also test my network with another old netgear router that works just fine.
View 9 Replies
View Related
Mar 25, 2013
I have a Dell Vostro 3460 laptop with Windows 7, 64-bit. My wireless driver is Dell Wireless 1704.802.11b/g/n. I just got this computer in December, and it worked fine for a couple of months, then about a month ago, I started having these problems.
Whenever I turn off or put my computer to sleep and turn it back on, my wireless connection doesn't work. The wireless indicator light on the front of the laptop is not on, and I push the FN+F2 button (which is supposed to turn on wireless), but it does nothing. I checked under the device manager, and the wireless adapter is not there.
After the first time I ran the diagnostics, I reinstalled the driver. The I restarted the computer, and the wireless was working. However, that night I turned of the computer, and when I turned it back on the next morning, the wireless was not working again.Other things I have discovered that sometimes work as a temporary fix:
Sometimes, if I wait 5 or so minutes, the wireless indicator light will come on, and then I can restart my computer and connect to a network, but most of the time, I can wait for hours and it never comes on.If I start in computer into safe mode or the BIOS screen or diagnostic screen, sometimes the wireless will start working after I exit that mode and start into normal operating. For example, one of the times that I ran the PSA diagnostics, the wireless started working afterwards, but stopped working again the next day. Another time, I started the computer in safe mode with networking to see if that would work, and the wireless did not work while I was in safe mode, but then I restarted the computer in normal mode, and the wireless came on.
One time, I went under Device Manager and did "Scan for Hardware Changes." After that, the wireless indicator light came on, and I restarted the computer and was able to connect to a network.However, all of these solutions were temporary, and some of these solutions only work one time but not again.I called Dell Support a couple of weeks ago, and they said that my antivirus program might be stopping the wireless driver from starting up. I have Trend Micro, which came with the computer.
View 3 Replies
View Related
Oct 15, 2012
I am attempting to bring up a remote router using a pppoe connection by replacing the current Tenda 308R router with a Cisco 1921 using the Ethernet connection on the WAN side. The connection works fine with the Tenda in place but when I put the Cisco in I get no connection and no answer for my PADI queries.I always get padi timer expired. I do not think it is even getting to the ppp authentication. [code]
View 5 Replies
View Related
Apr 13, 2012
I am trying to setup my network in my home, so that I can extend the wireless signal from my main router by using an access point (a tenda w311r+).But, I want to do it so that the access point isn't connected to the main router with a cable, I want it to be connected to the main router wirelessly.It does say on the box that it can 'bridge' multiple wireless routers.
The access point I have also has 4 ethernet ports on it, so I will use one of these to plug my xbox 360 into.I also want the main router to be responsible for the DHCP.
View 3 Replies
View Related
Jan 13, 2011
I am running Windows 7 on a system with an Asus P5ND Mobo and am trying to install a Tenda W322P wireless card. The led on the card doesn't light up indicating no power is making it to the card. I have tried installing the drivers off the cd but it says it won't as it cannot detect the card and I installed the drivers from their website but Windows still won't detect it. I have tried turning PCIpnp both on and off at the mobo but nothing seems to make a difference. Have they just sent me a duff card or could it be my mobo or something else?
View 5 Replies
View Related
Nov 4, 2012
Why do I have to restart my computer to connect to the internet? I've had this problem for about 4 months now and I don't know what it is. If I leave it idle at anytime and come back, I have to restart the computer to connect.
View 2 Replies
View Related
