want to put local working apache server behind the edimax router.so i check Enable Port Forwarding and add it:Current Port Forwarding Table:1 192.168.2.100 TCP+UDP 80i check it and restart it and is not working. how to do it now?
View 14 Replies
I Have a Computer Ready for setup as a Server in the LAN Connection:
Windows 7 Professional.
Another 2 Computers for LAN Connection:
1st Computer is a Windows 7 Professional (Connect as LAN)
2nd Computer is also Windows 7 Professional (Must connect using a Wifi D-Link)
Another 2 Computer for LAN Connection:
Windows XP: Must Connect Using LAN port.
1 Computer:
Windows 7 Home Edition: Must Connect Using LAN port
2 Laptops:
1st Laptop is using Windows 7 Ultimate.
2nd Laptop is a Vista.
How to Connect these Computers to the above mentioned computer ready for setup as as Server?
ive been having some issues with my internet, i had an attack on my pc recently by some american orginization, ive reinstalled new windows on my pc, reset my modem, and nothign seems to work, i have too many tunnel adapters in cmd ip config i think, bell canada hooked up my internet lines and they actually joined two or more wires together and strung them up on the neighbours fence and mine and even wrapped it around a tree branch, god knows why they would even do that, maybe they think when the tree grows it will cost me money to fix it and theyll earn from thier mistakes instead of learn from them... anyway this is my ipconfig test results as explained in previous post from someone.Windows IP Configuration[CODE]
View 1 Replies View RelatedWe are planning 3 Internet Connections into our building. 1 will be for actual Internet traffic, 2nd for Voip phone system, and 3rd for internal network for Active Directory...etc. Oh the AD servers are controlled by another business so technically this line is still considered and outside line and is a T1. What I need to know is how best to make this all work so that our internet phones use the VOIP system, computers can log into the domain and access that network but use the Internet network for actual internet traffic? We were considering a series of managed switches and creating 3 VLAN's but I'm thinking we instead need a new router that all 3 networks connect to and dishes out DHCP to computers and phonesn example network is below.192.168.1.x ----> Internet (all computers use for internet traffic)72.10.10.x ----> VOIP (All physical and software phones use this network)10.10.10.x -----> Connection to external company that controls our network and has domain controllers, mainframe...etc.
View 2 Replies View Relatedhow to configure a server with net gear switch . I want to restrict access for a few users and use the netgear switch for file sharing between the small network. its got auto configuration .
View 3 Replies View RelatedLinksys tried multiple WRT54g routers and access point, 192.168.1.1 can't open the router config page.
View 5 Replies View RelatedWe have installed a WLC440 at a school with 30 1131 APs. Only 3 showed up under Wireless tab, and others became rogue APs. Where and/or what do I need to change on the configuration for others to join properly? Have matched the configuration on this WLC with other WLC at the other schools, and still not able to find out where the problem is.
View 6 Replies View RelatedWent to log into the web admin interface on my SG-300 today and I get this in both IE and Firefox:
I'm not able to login by typing user/password and just pressing enter. I've tried power-cycling the switch, however, since the power cycle, the font-panel system LED has been blinking green. I seem to recall, though I can't locate the reference now, that this means the switch is running with factory settings, but that cannot be right because:
1. I had previously saved a new configuration on the switch, which it should be using now.
2. It is answering on the configured non-factory IP address -- just not rendering the web admin interface successfully.
I've had this unit for approximately a month. This is not the first issue I have had with this unit (see: [URL] and I'm experiencing some strange LAN speed issues since I installed it. Do I need to RMA this thing?
Is this known bug that you cannot backup (export) full running or startup config from this switch? Will this be fixed in next firmware? (btw, still no new firmware with CDP support for this script altough sales literature mentions that it should have already been available...)Switch does let you backup configuration as text file (which looks similar to normal IOS config syntax), but it doesn't contain all settings so the file is pretty much useless to restoring the config to another switch.At least following settings are missing from the file:
- management interface config (including DNS settings)
- passwords
- remote syslog server config
- SNTP server config
- IGMP config
- LLDP config
I am having some issues with getting DHCP Relay to fuction properly over our SG300-20 Switch.Out current layout is as follows. Hanging off the SG300-20 are a pair of Clustered Checkpoint Gateways with VLAN'ed interfaces in Both of our 2 VLANs, a 3COM 4200G In VLAN1 which has the DHCP server (And all the other Servers) connected to it, and a Pair of HP Procurve 2520's Stacked in VLAN 2 to provide PoE for our Phones/connectivity for our PCs.The problem is I cannot get the DHCP Relay to fuction from VLAN 1 to VLAN 2. If I assign an address in VLAN 2 manually to a device connected to the Procurves, everything works fine. I am able to reach both VLAN 1 and VLAN 2, but DHCP aquisition fails even if the device is connected directly to a port assigned to VLAN 2 on the SG300. The SG300 is running at Layer 3 currently also.
Here is a copy of the running config:
--------------------------------------------------------------------------------------------------------------
switch4db24f#show running-config
vlan database
vlan 2
exit
interface range gi8,gi16
switchport default-vlan tagged
[code]....
At our office we use seven Cisco 300 Series Small Business Switches. One main switch in the server room and one in each room. They work great! But I’m having difficulties getting the Auto Voice VLAN to work correctly. In fact, it seems to works straight away on a PoE model, but not on the non-PoE models.
Switch (main server room):
Cisco SG 300-28 (PID:SRW2024-K9)-VSD
Switches (one in each room):
Cisco SG 300-10 (PID:SRW2008-K9)-VSDCisco SG 300-10 (PID:SRW2008-K9)-VSDCisco SG 300-10 (PID:SRW2008-K9)-VSDCisco SG 300-10 (PID:SRW2008-K9)-VSDCisco SG 300-10 (PID:SRW2008-K9)-VSDCisco SG 300-10P (PID:SRW2008P-K9)-VSD
All these switches use firmware v1.1.1.8. The switches in each room are connected to the central switch by Link Aggregation. The main switch is configured in Layer 3 mode and all the others in Layer 2 mode. We have a lot of VLAN’s configured. For this problem allow me to describe only the two that are relevant.
VLAN 102 - Internal Network (Clients)VLAN 104 - Internal Network (Voice) The switches on each room are mainly used for clients, printers and IP phones. The clients and printers should operate in VLAN 102. The IP phones should operate in VLAN 104. For this to work I have the 10 port switches configured as following.
GE1 – Trunk – 102U;104TGE2 – Trunk – 102U;104TGE3 – Trunk – 102U;104TGE4 – Trunk – 102U;104TGE5 – Trunk – 102U;104TGE6 – Trunk – 102U;104TGE7 – Trunk – 102U;104TGE8 – Trunk – 102U;104TGE9 – Trunk – 1P (LAG 1, with 1U;102T;104T)GE10 – Trunk – 1P (LAG 1, with 1U;102T;104T)
The network is fully routable. A DHCP Server is available. Each VLAN uses DHCP relaying. If we statically assign a VLAN to a port, that just works fine. Auto Voice VLAN is enabled with VLAN ID 104. All switches are configured the same. But this is what occurs…
When I connect an IP phone on the SG300-10P the IP phones are assigned to the Voice VLAN ID 104. If I would connect a desktop to that same port it is assigned to VLAN ID 102. Exactly as it should.But when I connect an IP phone on a SG300-10 the IP it is assigned to VLAN ID 102. But I also noticed that in some cases they are assigned to VLAN ID 1 and don’t get an IP Address. That depends in which order I change settings. The port its VLAN membership is then even changed to 1P. Although the port is recognized as an “IP Phone” by the smartport feature. I have noticed it does make difference if I modify the smartport macro and change the native_vlan paramater from "1" to "let's" say "102". That seems to affect it. Of course it may be just coincidence. What am I doing wrong? How should it work?How should you actually configure each port on a switch? (trunk?, Tagged/Untagged VLAN?)If you do not use Telephony OUI. Do you still need to configure the macros on the smartport defenitions?
I have tried about everything. I have also tried Telephony OUI, but it doesn't make any difference. I just can't get it to work properly on the non-PoE switch.
How to properly power down the Nexus 5000 and the fabric interconnect switches? I have looked up and down cisco's and google web for steps, but they are all coming back with the answer to just disconnect the power cables after you have power down all the windows os and exs servers. Before i do that, I just wanted to make sure that that's the correct way to do it or if there are actual commands that I will need to run on the devices to properly power down. I know that the FI do have a command to reboot, but i need them to completely be power down.
View 3 Replies View RelatedI want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.
View 3 Replies View Relatedhow to connect two subnets with two switches and one router using router sim software?
View 1 Replies View RelatedI have a bit of an unusual networking situation here in my home and need proper configuration, so I stop losing my web connection on a daily basis.The reason I'm forced to have the 2nd router is that my wife telecommutes and the 1st (primary router) is provided by her company. For whatever reasons, her company will not allow the wireless radio in their router to be turned ON - which forces me to add the 2nd wireless router for our 3 computers that require wireless access.
1 - Since the primary router has DHCP enabled, I am assuming that I should Disable DHCP on my wireless router. Am I correct?
2 - What other settings on the wireless router do I need to pay particular attention to in this situation?
I have several laptops that work fine with my wireless router. I have a new laptop with Windows7 and it will not stay connected for more than a couple of minutes at a time. Are there any issues with this router and Windows7?
View 1 Replies View RelatedI'm replacing an older (& failing) RVS4000 v1 with a new V2. I need to minimize downtime. Will a config backup from the old v1 restore properly to a new v2 (all have newest firmware)? There are a lot of tweaks including several VPNs and to do it all manually is not desirable.
View 2 Replies View RelatedI've purchased a Linksys RV042 hoping I could connect my two ISP.Both of them are 1/1 Mb, first is DSL second PPPoE connection.The problem is that on system summary page it doesn't show me that second WAN is connected. Even when I trying to manually connect to Internet it doesn't work.
When this connection is in Load balance Mode, internet is very slow, sometimes it's even disconnected.
My question is:How to configure Load Balance properly?I've tried this page:
[URL]...
I have my RV042 set up in Dual WAN mode and both WANs are working properly. I would like to configure WAN1 to handle all traffic, unless it fails and then have everything to go to WAN2. Pretty much what Smart Link Backup does, however with that enabled only 1 of the WANs is live at any given time. I'd like both WANs to always be live as I'm going to see the second one as a back-door into the network. Is this possible to do with routing? I tried setting a routing rule to have everything to go WAN1, but when WAN1 goes down, nothing is rounted via WAN2.
View 0 Replies View RelatedOur company lost a switch and replaced it with a SF300-24. The other components are a Westell modem and an Amped Wireless R10000G router.
The current configuration has the Westell DLS modem going into the R10000G router, the router is the DHCP server and from there it is plugged into port 1 of the switch (DHCP is off on the switch).
So the problem is the computers on the network randomly drop off the network during the day and sometimes upon booting them up in the morning won't even see the local network. If I unplug the R10000G and then plug back in that fix's the problem for a few hours but then sooner or later the computers randomly drop off.
There is one network printer set to a static IP address. It never seems to have an issue. I have tried setting some of the computers to static but they still have connection issues at some point.
I have a Campus LAN setup which is layed out using Cisco SRW2024 and SGE2000 SB switches. On the LAN we are running various services. These are CCTV, VOIP(SIP), Public Address(multicasting) and Internet hotspots to various locations. I have attached a layout of the setup. A unique VLAN is setup for each of these services.The problem we have is that the PA audio is breaking up at intervals making the output distorted this is also happening for the SIP phones within the facility. Using the user guide we have tried to setup QoS on the system but we seem not to improve the services.
View 2 Replies View RelatedHow to erase or remove configuration file from ESW 500 Series Switches?
View 2 Replies View Relatedi have a router connected to my ISP which can get me 2 different IP's at all times (the router gets one IP).Now i want to get my computer to have a different ip as my router has (seen from outside my home network) - i want my computer that accesses the internet through my router to have a different IP as my router. I know that if my computer gets it's IP from my router's subnet, then it will (seen from outside) always have the same IP as my router. So the question is how do i get around this ? Do i just have to change my PC's DNS / gateway settings to match my router's ? The PC is connected to my router via wifi. Or would forwarding some ports on my router work ?
View 3 Replies View Relatedwhere is the wps button on router
View 2 Replies View RelatedI am trying to get into router to allow my VUDU box to connect so I can download movies,
View 1 Replies View Relatedi cant use a new tablet i bought due to i can't remeber pas word for router it was such a long time ago it was installed
View 2 Replies View Relatedi have a pppoe connection coming through ethernet line. i.e i need to use dialer that i have created on the desktop..and i have bought a new Linksys E1000 router v2.1..now my problem is that1) After entering all the settings correctly my router worked for 3 days after that the net is not working.i.e it cannot connect to the internet keeps giving the error cannot get IP from PPPOE(i have connected my router in pppoe mode and use the router status page to connect and disconnect)I have also updated the router to the latest firmware 2.1.01 and after that the problems have started.My Net works if i directly plug the Ethernet cable in the PC.the problem starts when i connect it to my router.
View 3 Replies View RelatedI have a Linksys Cisco system router and cannot get it to work, I believe I have it hooked up right. I am wanting it for a Sylvania wireless mobile internet device.
View 1 Replies View RelatedHP desk top XP media edition 2005 is it wifi capable
View 3 Replies View RelatedUsed the reset button, but my system is still not detecting my router!
View 3 Replies View RelatedI have 4 computers on LAN using a router and I cannot see eachother, don't know how to configure the PCs. The router is set on DHCP for LAN, the PCs are using Windows 7 and can connect through the internet the router is providing (4 dells) but don't know how to set the computers to see eachother and to share files.
View 2 Replies View RelatedIt is showing 24.93.232.1. I reset my router and now I cannot get a wireless connection.
View 5 Replies View RelatedI need to retrieve my password for the linksys router wrt54g
View 1 Replies View Related
