Setting Up Wireless Network Without DSL / Cable?
Nov 28, 2012Setting Up Wireless Network without DSL/Cable Can it be done and how
View 1 Replies
ADVERTISEMENT
Linksys Cable / DSL :: Setting Up Old WAG160N As Central Hub For Network?
Jul 15, 2012I have a old Cisco/linksys router that I want to do a complicated setup with.Heres my current situation.I currently have my computer and laptop linked into my home network over wireless as running a cable to the hub gets in the way of other door ways, But when playing networked games i run the cable as its only for a short time and people can cope with that,However I have recently gotten into minecraft server hosting, and I have previously just Run two cables to the main hub so I can host the server on my desktop and play on my laptop.So here is where is gets complicated.I found my old router and set it up as a central hub for my room, with the laptop and desktop going into that, then one cable going to the hub,However, I am spending alot of time messing around on the server and would like some way for me to connect to the server from my laptop without having to go though the central hub, just using this sub router. But I still want my IP to stay the same when i reconnect to the main network so when my brother and other friends want to play I can connect to the main network and host over that without having to change my server settings for the new IP.
View 2 Replies View RelatedSetting Up Wireless To Cable Modem?
May 4, 2012cable company connected cable modem to computer, and left us to do the wireless set-up. during this process, we had to disconnect the ethernet cords and reconnect at correct locations. Now, no internet period. The cable modem is not showing a send signal
View 1 Replies View RelatedLinksys Cable / DSL :: WAG120N Setting As Wireless Access Point?
Mar 23, 2013I have had trouble setting my WAG120N as router.
I am connected to internet via a cable modem, via the LAN cable, I connect cable modem to WAG120N that I want to use as an wireless access point only. And I have got 2 PC, 1 runs on XP, the other on runs on Windows 7. My XP would have no trouble to connect to wireless, but the Win7 can only connect to wireless network, but no internet. When I try the troubleshooting from Win 7, it says, DNS server isnt responding The setting I am using at the moment is Bridged mode only, without entering any values of DNS, IP, etc Is there any setting that work for both OS?
Linksys Cable / DSL :: Wag120n Modem Router Wireless Security Setting?
Jan 14, 2012I am using wag120n modem router but is confused abt how to setup it's wireless security.The wireless securit setting recommended in tutorial given here is very different from what is given in my routrs setting up page.
I don't know how to handle the key renewal option.If i leave it as 3600 seconds does that mean i have to enter a new key in my wireless device connected to the router after every 1 hour?
Setting Up Lan / Connecting Cable And Wifi Pc?
Jul 2, 2012I just re-installed Command & Conquer generals: Zero Hour after a long time & I would like to play via Lan with another computer in the house.Here's the deal:My computer is connected to the router via cable whilst the other computer connects to the router via wifi. How can I make it possible to connect them to play LAN?
Edit: My pc is running windows 7, the other is running XP
Linksys Cable / DSL :: Setting Up VPN On WAG320N?
Mar 2, 2011how to configure or set up VPN on WAG320N?
View 3 Replies View RelatedSetting Up Cable Internet Connection After Reinstall Of Xp?
Mar 16, 2011I had so much old garbage and damage from old viruses I needed to reformat the hard drive and reinstall windows xp from the System OS disk. Computer is up and running now, but I lost a lot of stuff, including my ability to connect to the internet and some drivers. I have cable internet. I downloaded Broadcom advanced control suite and the netxtreme 57xx drivers from the Broadcom site, and installed them with the provided download manager. Nothing seems to be working, the control suite says "No active broadcom network adapters detected in this system"....
note- I've been downloading to a different computer and burning the files to CD, and transferring them to the Dell that way...
Linksys Cable / DSL :: WAG54G-EU Secondary IP Setting
Mar 21, 2011Can I add a secondary IP address for LAN interface to manage two LAN in my network?
View 1 Replies View RelatedLinksys Cable / DSL :: X2000 / Setting Up Static IP For Linux Server?
Jul 2, 2012The router I am using is the Linksys X2000 wireless-N ROuter with ADSL2+ Modem. How to give my linux server a static Ip adress. I've googled it and I don't understand how they are telling me to set it up in the router.
View 3 Replies View RelatedLinksys Cable / DSL :: Wrt54gx4 - Dhcp Setting And Port Forward?
Feb 18, 2012dhcp setting and port forward
View 3 Replies View RelatedWireless :: Setting Up A Network From A LAN?
Aug 30, 2011how do i connect to a friend's laptop who is using a LAN network. actually he wants to setup up a peer to peer network for me so that i can connect through to him computer. how do we setup the peer to peer wireless network so that i can connect to his LAN network through my wireless.
View 1 Replies View RelatedSetting Up A Wireless Network
Apr 11, 2011I moved out to a farm recently and am trying to set up a wireless network.Currently the house has a PC with a DSL modem. My PC is in a cabin about 450 feet away and does not have it's own phone/internet line.I bought a wireless router, network card and a more powerful antennae. Both have removable antennae so I can replace with better ones. [code] The wireless aspect works fine and I'm able to connect both PC's.I connected the DSL modem to the WAN port on the router and then the router to the PC.I can access both devices from the PC and configure them and it shows that it's connected fine. But I can't seem to access the internet through them. It works fine if I connect directly from the modem to the PC.
View 1 Replies View RelatedLinksys Cable / DSL :: DPC3825 Modem Remote Management Port Setting?
May 24, 2011I am looking to permanently reset the default remote management port of the MODEM DPC3825 to something other than 8080. how to PERMANENTLY change the port from 8080? In the web interface under administration I have several times set it to something else other than the defaulted 8080 but when the modem is rebooted or reset, it goes back to the default 8080.
View 4 Replies View RelatedSetting Up A Large Wireless Network
Dec 17, 2012I am trying to set up a network that is over a larger area than I am use to. I have experience setting up wired networks for small and medium sized businesses, as well as setting up multiple access points to cover a larger area. My goal is to set up a work site trailer to provide wireless coverage for a farmer's field. The largest distance I am dealing with is a half a mile. Depending on the field the direction the signal ranges from 90 to 180 degrees. My problem is my lack of experience with the hardware to accomplish this. I am trying to figure out what is the easiest cheapest and most reliable way to accomplish this. Currently my plan is to use a Cisco WAP4410N access point and hooking it up to multiple high gain unidirectional antennas. Is there a reliable website out there to accomplish this without wasting money on trial and error? I don't like starting a project before can this be accomplished? What should I be looking for in an antenna? How many degrees offset should they be? What kind of wire should I be running from the antenna to the access point?
View 3 Replies View RelatedSetting Up Wireless Home Network?
Feb 12, 2013I want to set up my own home wireless network for the first time. Also this is the first time I'm using wireless router.nd trying to set up the network.Currently, I have ADSL+ router device that is configured in route mode and it has PPPoE credentials stored, so until now, I use ethernet cable to connect it to the ADSl router and everything works fine (Automatic IP, DHCP on notebook). Notebook also has wireless adapter, so I bought asus wireles router.This was supposed to be an easy install. According to the instructions all I need is to use this ethernet cable to connect to WAn port on wireless router and to follow Quick set up instruction. But this quick installation procedure fails.When I try to figure out why, I came accross to the fact that existing ADSl router has 192.168.1.1 and this new asus WiFi has also 192.168.1.1
View 5 Replies View RelatedSetting Up Wireless Network In Salon?
Mar 15, 2012I have a salon with widows XP, At&t DSL modem (for credit card processing). I would like to hook up wireless internet (probably linksys for customers but also to hook up Pandora music). How do I hook up? DSL phone to modem to wireless? Or visa versa and many of the problems I have read about on line seem to be older posts (is it easier now). Do I need to go in and change to a "bridge" mode?
View 4 Replies View RelatedBelkin G F5D7634-4 - Setting Up Wireless Network?
Jun 22, 2011I'm trying to connect a wireless router modem (Belkin G F5D7634-4) to an already exisiting wired network in our home (Wired modem is a Scientific Atlanta EPC2100 series). The wired modem is connected to our home computer, and i want to connect the wireless modem so that i can pick it up on my xbox etc. Yet the home computer dosen't have wireless capabilities, so still requires the wired modem. I've tried, unsuccesfully to set this up, i've connected the 2 and the home computer so that the internet still works through the wired modem, an wireless signal is being put out (without internet and i'm unable to access the router's settings page) Is there any way for this to work? And if so, how would i do it. If not, what are the alternatives?
View 3 Replies View RelatedIntel(R) PRO / Wireless 3945ABG / Setting Up Ad Hoc Network?
Jan 18, 2011I've been trying to setup a wireless ad hoc network so I can connect to the internet using my iPod Touch. My wireless adapter is Intel(R) PRO/Wireless 3945ABG Network Connection running the most up-to-date driver.
- Set it so Windows configures my wireless network settings
- Created a wireless ad hoc in Wireless Network Connection Properties
- Changed it so that network access is given to ad hoc networks only
- For my LAN connection under Internet Connection Sharing, "Allow other network users to connect through this computer's internet connection" is ticked I am able to connect to the network that I setup but when I try to connect to the internet it fails.When I check the Wi-Fi Networks setting on my iPod Touch it gives this information:
IP Address: 169.254.1.158.228
Subnet Mask: 255.255.0.0
Router: (blank)
DNS: (blank)
Search Domains: (blank)
Client ID: (blank)
I checked and that IP isn't my IP?
Home Network :: Setting Up Two Wireless Connections In The Same House?
Aug 3, 2011I currently have one wireless router in my house. Of course its hooked up the the modem, but i also have it hooked up directly to my desktop considering the router is on the desk where my computer is.I recently moved to a new house.One of the rooms has a huge brick wall in it, unfortunately the computer is in that room.AND, its on the far left side of the house, so the other side of the wall barely gets any signal (Enough to work, but it bounces and only gets about 2 Megabytes Per Second, which is awful, because the router sends out 20 megabytes per second due to our internet plan.) Now, my room is all the way on the far right side of the house, in my room, i get barely any connection at all, 20% is normal in my room. I have my Playstation 3 in my room, so I had to wire an ethernet cable from the wireless router, up through the attic, to my PS3. I can now get 20 MBPS while playing video games. While that is great, i still don't have a wireless connection back there.
What i want to know is, can i plug in another wireless router to the ethernet cable in my room, sending out another signal. So basically, im plugging up a wireless router to another wireless router, and want them to both send out internet.I plan on getting a gaming laptop in December and will be playing it most of the time in my room. I need to know if this is possible, and if it is, how do i do it?First off, let me state that moving the computer or router in front of the brick wall is completely out of question.Also, know a lot of stuff about computers, but know almost nothing about networking.
Setting Up A Single Wireless Network Across A Number Of Houses?
Jul 27, 2012As the title states, I am want to set up a single ADSL connection, using 1 router across 6 apartments. The apartments are 2 floors and from the top they look like this The Router is on Apartment 1. Between apartment 1 and 2, 3 and 4, and 5 and 6 is a normal cement wall. Between 3 and 4 is Cement and stone, so are the outside walls of each house. I was thinking of doing it simple and using 3-4 range extenders such as the Linksys RE1000. From what i searched on the internet, and what the documentation states, the signal will get bottle-necked for the last house due to the RE1000 giving half of the bandwidth. Quote from Linksys FAQ: Quote: 7. Can I add more than one RE1000 to my existing wireless network? Yes. But since the RE1000 only gets half of the wireless signal from your main router or access point, adding multiple range extenders can provide you with even lower signal, thus, giving lesser bandwidth to your wireless computers or devices that you are going to connect to these additional extenders.So, what would be an optimal solution to this? Should I go ahead and install the RE1000's? Is there something better that i can do?
View 5 Replies View Related1240AP - Setting Up WPA2-Enterprise Wireless Network
May 16, 2011So I have been tasked with setting up WPA2-Enterprise on the network. Right now for testing I have a single Cisco 1240AP, and a test Windows Domain. The Windows domain is at 2003 functional level, but has been extended to have the Wireless policies, and we have a 2008 DC in the test network also.
Is there any definitive guide to setting up a WPA2-Enterprise wireless network? Most of what I find is mostly client side. I am trying to get the Group Policy setup to push down to the client machines.
Home Network :: Setting Up A Wireless Router And Turning Of DHCP?
Mar 9, 2012I have a question regarding setting up a wireless access point on a network. Lets say my router is going to connect to a switch. The switch puts out 192.168.4. addresses. I want the wireless router to do the same. So I turn off DHCP.Everything works fine and everyone can communicate. Here is my question. How do I ever connect back to the wireless router if I need to change the settings? If the wireless routers address is 192.168.1.1 I cannot get back to it since i am now on the 4. subnet. I have also tried changing the router's ip to an address on the subnet such as 192.168.4.100 but on two different routers this didnt work. One didnt me and said there was a conflict with the WAN IP. The other one would not let me get on the internet.
View 1 Replies View RelatedHome Network :: Setting Up A Wireless User Group In Town
Aug 29, 2011We want to set up a wireless user group in our town between a few friends and new people who are interested to join. As far as I heard I don't need a ICASA License for the 5.8GHz Frequency if we are using it for a non profit orginization, so we may use that.
1 x Routerboard
3 x Radio Plugin Boards
3 x 120degree Antennas
to set up a 360degree HS (Highsite).Then at each person's house we will need:
1 x Routerboard
1 x Radio Plugin Board
1 x Whichever Antenna
Is that correct? Then also if we wanto run VoIP on our network, how do I do that? Basicly we want to use it for gaming, file sharing and VoIP. No Internet of anything else.
Cisco 1841 Router / Setting Up A Wireless Network For Library?
Jul 6, 2012I work at a small public library and we're trying to setup wireless internet for our patrons. I've been studying VLANs, trunking, etc and going through the Mike Meyers book trying to study and learn enough to prepare for the Network+ cert. We are using a Cisco 1841 router, a Linksys SRW224G4 switch, and we just purchased on recommendation the Cisco WRVS4400N Wireless N VPN Router.
View 3 Replies View RelatedLinksys Wireless Router :: Setting Up E4200 As Local Network
Jun 5, 2012I've been playing around with my E4200 but cannot find the right combination of settings. My problem: I bought the router for cable internet that never happened. In the meantime I am accessing the web using a 3G dongle. Hoewever, while connected to the router (wired or wireless), all the PC's in my home refuses to access the 3G internet - it is as if it wants to use the E4200 to access the net, no matter what. So every time I want to access the internet, I have to disconnect the PC from the home network, and connect with the 3G on that particulat PC. (I have three PC's at home, 1 wired and two wireless). If I set the E4200 to bridge mode, I struggle to find a logical IP address, since I would ideally like to run the network at 192.168.1.X. How do I set the E4200 to allow a home network to be established without having to disconnect everytime I use the 3G on a PC? Also, it seems that if the router doesn't handle the DHCP duties, win7 by default makes the network public, which complicates sharing a lot...
View 5 Replies View RelatedLinksys Wireless Router :: Wrt54g - Setting Up Wifi Network?
Apr 27, 2013I have the following equipment
E2500 wireless N router (2 of these)
WRT54g router (B/G)
WAP54g access point (B/G)
I am planning to set up a wi-fi network for a single story motel. It is C-shaped; about 300 feet along the longest side with "legs" of 120 and 70 feet. I have included a diagram that I drew for the person that will install it. Until now I have only used that single WRT54g in the office for the entire property and it covers about half the property (left side) but not well and with a dead spot in the top left because of too many walls to go through.
My plan starts in the office (bottom left) with a WRT54g connected to the DSL modem as it always was. That would be connected to one of the E2500s in the middle so it can cover the most area. From there two others would shoot out to each corner (the other E2500 and the WAP54g). They will all be wired together with Cat 5e "riser cable". The routers will be placed in a wide open attic.
1. Is this is a good plan for the size of property? I have heard that N routers have a range of 150ft in every direction so that's why I'm putting one in the middle. Keep in mind that while the attic is open and wood constructed, the walls between rooms are concrete firewall and they haven't been wi-fi friendly. Hopefully putting them in the attic takes care of this.
2. Does starting with a B/G router at the modem mean the N routers will revert to B/G?
3. What are the main settings I need to know about? What "mode" does each need to be set to? Do they need different default gateways?
Can I use the same password/security for all of them? Should I use the same SSID for all?
Linksys Wireless Router :: E3000 / Setting Up Guest Network?
Feb 18, 2013I just installed and started using my E3000. Love it so far but I have a question about the guest network. I did set one up with a network name and password. It does show up under available networks but as an unsecured one. How do I go about securing it?
View 2 Replies View RelatedCisco Wireless :: WAP321 Setting Up Wireless Network For Small Office
Jan 13, 2013I'm setting up a wireless network for a small office with 25 people with approx. 15 on wireless at any time. The office is very long and skinny so I'm looking at a cluster of WAP321's. I'm hoping these will save a ton of money versus buying a controller and more expensive access points.
How do these work for roaming? I tried a search but I've found descriptions of them not roaming at all and descriptions of them roaming but you have to do some kind of pre-authorization right up to they roam with no user interaction, they just roam.
I need the users to be able to roam around the office with no interruption. I don't want to install these and have to rip them out later and put in new ones and a controller. How to find out if the WAP321's will work for roaming.
Home Network :: Setting Up Networks With Multiple Locations / Wireless Points?
Feb 11, 2011setting up networks with multiple locations and multiple wireless points.For example: My sisters' home has here modem in her main computer room, it has a Belkin router hooked to the modem. Then a line goes from there to my nephew's room where I tried to expand their network by adding another router. I really just wanted an access point, but they don't seem to sell these as much as they used to. Anyway, I had it working, but it was two different networks, NETWORK1 and NETWORK2. So they had to swap networks when moving around the house. what would be the best hardware setup to provide both sides of the house with some Hardwired access as well as wifi access? Right now, we have two routers, a DIR615 (or something like that) and a Cisco E1000, and again hardwire going from the main computer room to my nephew's room.Also, in my house, I have lots of stuff... I have an Actiontec Router from FIOS, feeding a small hub as well as a switch in my main room. Which then feeds a Ps3, Wii, laptop, Denon reciever, and Access Point... and also feeds my Apple TimeCapsule, which also feeds my printer. My wireless devices range from cameras, iphones/ipads, and a wifi unit (I forget what it's called, but it connects my DVR wirelessly to my network, and the DVR itself doesn't have wifi).
my question about my setup is, should everything be on one network... as in let the ActionTec handle most of the duties and use switchers and accesspoints to extend the network. Should everything be on the same wireless network and channels? Like if I used my access point to extend, do I want the same settings as my main wireless router, and would that be the same for the Apple Airport Extreme?Also, does having all these wireless networks going create any kind of hinderance on my performance. For example, the PS3 has some sort of wifi in it... it produces a SSID, but I never connect to it. Should I make sure that's off? And in my main room, should I go with just the AirPort extreme over using it and the Wireless Access point.
Cisco Wireless :: AP1232AG-E-K9 / Setting Up Access Point To Public Network?
Nov 9, 2012I want to use one (or two) AP1232AG-E-K9 access points for Internet connection through a public wireless network (BTFON), where wire broadband is not an option. I've downloaded what I think is the correct manual for the APs and I'm now scratching my head as to where and how to start setting them up. I want to use these Cisco APs in the hope they will give me better wireless performance than I'm currently getting, which is frequently flakey. I've tried to reset the APs to the factory default but there seem to be different ways of doing this depending on what you want and what you've got. I made up a console cable to access the console but there even appear to be different versions of this so I'm not sure if the cable I have is the correct one. I have setup and used lower end wireless devices in the past but these Cisco units seem real complicated.
View 39 Replies View RelatedLinksys Wireless Router :: WRT54G / Setting Up E1200 As Extension To Existing Network?
Apr 20, 2012I have a WRT54G that has served us well for several years, but I needed a network connection in another part of the house, both wired for TV, and wireless for downstairs. So I ran an ethernet cable through the house and connected it to my new E1200. It's connected to Port 1, not the Internet port. The TV plugs into Port 2, and my Apple TV to port 3. So far so good, TV and Apple TV appear to work fine. Wireless is where I'm having problems, the wireless signals between the two routers appear on Wifi Analyzer I'm using. Both appear strong in signal for a second, then they disappear, then they appear again for a second, then they disappear. So the wifi's signals appear, then disappear and this cycle continues.
The WRT54G is setup with DHCP, channel 6.
IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 DHCP Server: Enabled Start IP Address: 192.168.1.100 End IP Address: 192.168.1.149
The E1200 DHCP is disabled, channel 11, 20mhz.
Router IP Address: 192.168.1.2 Subnet Mask: 255.255.255.0 DHCP Server: Disabled Start IP Address: 192.168.1.1 (DHCP disabled) End IP Address: 192.168.1.50 (DHCP is disabled)
I've tried both routers named the same, and then tried 2 different names. I've rebooted them as well after making changes.
TP-Link Dual-Band Wireless :: WR2543ND / WDR4300 Not Setting Network Shares?
Feb 20, 2013Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
I have a client that has a WR2543ND (House) and WDR4300 (Office/Internet) router that are located in two separate buildings about 40ft apart. He has each one hooked up to external antennas connected on the outside of the buildings. Back in December I got WDS working between the two routers and the PC in the house was able to use the Internet in the Office as well as share resources between the office and house computers. Two days ago I was down there working on his network and I was having problems setting up network shares. I discovered I wasn't able to ping from the Office PC to the House PC or vice versa and what's even stranger, I couldn't ping the House PC from the House Router (WR2543ND). I checked WDS status and on the House Router is says "Run" but on the Office Router it says "Int" but the WDS is definitely up because I am able to ping from the Office Router to the House Router, plus I am able to use TeamViewer to connect to the House computer from the Office computer. There are no firewalls enabled on Windows. Lastly the DHCP server is only running on the Office Router.