Setup Linksys 3200 Remote Access

Oct 3, 2012

I'm trying to setup remote access for my linksys 3200 so that I can configure it through the WAN port. I have turned on remote access, however when I try to connect I get a 404 error. The settings I have are:

When I try to access xxx.xxx.xxx.xxx:9999 I just get a 404 error. I have allowed RDP access to a computer behind the router and this works fine on the same IP address. what else I have to do to allow remote management access?

UPDATE: I tried changing the port to 80 and it works. Change it back to any other number and it doesn't work. Modem is setup with a DMZ to the router's IP. Why does it only work on port 80? BTW I can't use port 80 because there is a website hosted behind the router.

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: How To Setup Remote Access With E4200

Aug 11, 2011

how to setup the E4200 so that I can access the media server when I am in office? I was browsing on the Cisco website and unable to find it. 

View 8 Replies View Related

Linksys 3200 - Router Delay / Lag During Gaming?

Jul 4, 2011

I noted that my router (Linksys3200) has delays or lag on the average of 5 to 10 seconds apart, but random, while playing on line games. While continuously monitoring delays (ping) with a program called Ping Plotter, it ranges from 25ms to 65ms. When not gaming, just surfing the net, the ping is zero and once in a great while a 5ms or 6ms spike may occur.

Am I looking at a malfunction in the router or the computer? or Is this normal?

View 7 Replies View Related

Linksys 3200 - Routers With Built In USB Storage Support?

Nov 3, 2011

I have a linksys 3200 router and i am wondering what all External USB HDD work with it. I have a WD 1 TB but it doesn't seem to work with it. I know that with the latest Firmware the router supports drives upto 3 TB so i know my capacity is not the issue but rather it seems that the drive itself just isn't recognized at all.

View 3 Replies View Related

Cisco VPN :: Setup Remote Access Using ISR 2801?

Mar 23, 2011

I was trying to setup an Remote Access VPN using ISR 2801. I was able to establish the vpn tunnel from my house using DSL Connection (behind NAT), the ISR give the IP address which is from the ip pool that I configured on the ISR. The problem that I have right now is that it fails reaching the corporate LAN network.
 
[code]....

View 6 Replies View Related

Linksys Wireless Router :: 3200 Keeps Dropping 5ghz Wifi

Feb 2, 2012

I purchased the linksys 3200 dual band router recently.  I am a huge cisco and linksys supporter so for me this is disappointing. Aside from being slower at times than my previous router I am having issues with the 5Ghz wireless.  My issue I am facing is it seems multiple times throughout the day the router somehow drops its 5ghz wireless ssid or its gone..not sure.  The only way I can get it back up and running is to reconnect with the Cisco Connect software and re-establish the settings and then reconnect any wireless devices.  This seems to happen sporadically and is insanely annoying considering this router should be a big upgrade.
 
It seems to me the 2.4Ghz band seems to be more stable.  I am on the latest firmware for the device and I am using a 5ghz compatible wireless device to connect to it.  

View 9 Replies View Related

Linksys Wireless Router :: 3200 - Turn Off SSID Broadcasting?

Oct 9, 2012

I just set up my new Linksys 3200 router and wanted to know if i should turn SSID boradcasting feature off?

View 2 Replies View Related

Cisco VPN :: Setup Remote Access In 1841 Router?

Aug 12, 2012

I am trying to set up Remote access vpn in 1841 router. The vPN client is connecting to router, but cannot ping to remote LAN Here is the config.
  
Current configuration : 3625 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption

[code]....
 
I am not getting any hit on the deny statement of 102 when i try pinging to client ip address (10.0.0.10).

View 2 Replies View Related

Cisco VPN :: ASA 5510 - Remote Access Setup / Keep Getting Logs

Apr 17, 2011

I have a problem with ASA 5510 8.0(4) This is a remote-access VPN setup and it's functional, no problems here...

But I keep getting logs like this every few seconds:

Group = <censored>, Username = <censored>, IP = <censored>, Reaper overriding refCnt [0] and tunnelCnt [0] -- deleting SA!
Group = <censored>, Username = <censored>, IP = <censored>, SA lock refCnt = 0, bitmask = 00000080, p1_decrypt_cb = 0, qm_decrypt_cb = 0, qm_hash_cb = 0, qm_spi_ok_cb = 0, qm_dh_cb = 0, qm_secret_key_cb = 0, qm_encrypt_cb = 0

View 1 Replies View Related

Cisco VPN :: Setup A Remote Access VPN On ASA5505 Firewall

Jun 2, 2013

I have setup a Remote access VPN on my ASA5505 firewall through the ASDM wizard.I can successfully connect with the Cisco VPN client. My firewall also shows me the VPN session and shows incoming Rx packets. However, Tx packets remain 0, so no traffic is going out. My ASA5505 is configured as router on a stick with 25 different VLAN's. I want to restrict traffic to one specific VLAN using a crypto map.When I issue a ping -t command on my connected Windows box, the firewall log shows me the following message:
 
"IKE Initiator unable to find policy: Intf outside, Src: 10.7.11.18, Dst: 172.16.1.1."
 
"This message indicates that the IPSec fast path processed a packet that triggered IKE, but IKE's policy lookup failed. This error could be timing related. The ACLs that triggered IKE might have been deleted before IKE processed the initiation request. This problem will most likely correct itself." [code] I have really no idea what's going on. I have setup a Remote access VPN countless times but this time it shows me the error as described above.

View 5 Replies View Related

TP-Link 150Mbps Wireless :: TL-WR740N / Setup DVR For Remote Access?

Dec 5, 2012

Region : Ireland
Model : TL-WR740N
Hardware Version : V1
Firmware Version :
ISP :

I am trying to setup my DVR for remote access but my public IP and the routers WAN are not the same?

View 4 Replies View Related

Cisco :: Asa 5505 - Create A (remote Access Vpn) Setup For Ipsec?

May 8, 2012

I have a newly aquired asa 5505 that I just set up to the bare minimum configurations. I followed a cisco paper on how to create a "remote access vpn" setup for ipsec. I can sucessfully connect and establish a VPN, but when I try to access an inside resource from the vpn address, the asa blocks it.

Specific error is: Code...

View 17 Replies View Related

Cisco VPN :: IPad Remote Access VPN (ipsec) Setup On ASA5540

Jul 9, 2012

I had IPAD setup IPSEC Remote Access VPN to try to conect to ASA5540 and Cat65 VPN service module(V1).I works fine on Cat65 VPN service module using IPAD client, but it is fail on IPAD client connect to ASA5540.THe message should be "VPN server is no response".My laptop Cisco VPN client(Windows 7) works fine on both (Cat65 VPN module and ASA5540).There is any special setting for IPAD client on ASA5540 ? The IPAD ios version 5.1.1.The ASA5540 version 8.4(4)1 ADSM 6.4(9) The Cat65 version is quit old binding with CatOS V12.2 etc.

View 2 Replies View Related

Cisco VPN :: ASA 5505s - Computer Network Connecting To Remote Access Setup

Dec 4, 2012

I am looking up setting a VPN using ASA 5505s so we can connect a mobile network of computers to our base network of computers. The base network has a static public IP address, but the mobile site will not. I was thinking of using a remote access VPN setup, but I am unsure if I can have a network of computers connecting in to the remote access VPN setup.

View 5 Replies View Related

Linksys Wireless Router :: How To Setup Remote Management On A E1200

Aug 25, 2012

I want to be able to login to a router remotely and foward a port on the router. I thought i saw a spot for remote management but don't know how to use it. I have a dyn account and can create a dns for it. 
 
i setup security dvrs on the internet so clients can see cameras from outside their homes. I would like to be able to login to a router if i need to foward a port or something similar. 

View 1 Replies View Related

Linksys Wireless Router :: 3200 Laptop Using G Card Connection To Wireless

Dec 29, 2011

If I get a new wireless router that is N and attach it to my desktop computer, will my laptop which has a G wireless card in it be able to work without any modification?  I thought I read that N is downward compatible with B and G cards, but then I saw some kind of network adapter that is put in the USB and wondered if I'd have to do that with the laptop.  I'm leaning towards a E3200 right now.

View 2 Replies View Related

Remote Access Linksys WAG200G Not Through WAN

Jun 24, 2013

I have a network based on a SpeedTouch 706 modem/router, provided by my ISP. It is not possible to turn off NAT or DHCP on this device. Since it lacks wireless functionality, I added a Linksys WAG200G, by connecting LAN ports on both devices. Internet through WLAN works.

I would like to be able to manage the Linksys router/access point from an outside location, but I cannot get this to work.

The Linksys is configured for remote management on port 443 from any IP. The SpeedTouch is set to forward port 443 to the local IP of the Linksys. An nmap scan from the outside on my ISP-assigned IP on port 443 shows 'filtered'. If, as a test, I forward this port to my computer, nmap shows 'closed' (I have no service running on port 443), indicating that the portforwarding works. I chose 443 since somebody suggested that the Linksys device requires an https connection — I have tried different ports as well, to no avail.

My suspicion is that the remote management functionality only works through the WAN side of the Linksys router. It has no such port, though. Only 4 LAN ports and a 'line' port for the telephone line (unused). I would like to keep both devices — even though technically the Linksys could probably take over all functions from the SpeedTouch — because of the silly reason that both devices are not located in the same rooms, and already properly fitted in their respective places.

View 1 Replies View Related

Linksys Cable / DSL :: How To Block Remote Access To WAG320N

Jan 26, 2012

I disabled Remote Access under the Administration tab but I still can access my router management from the internet by typing in my routers gateway address. In fact I did the opposite of all that is described here. I already did a soft- and hardware reset. How can I block Remote Access forever?

View 4 Replies View Related

Linksys Wireless Router :: WRT400N - Remote Access For VPN?

May 15, 2013

I am trying to troubleshoot my own router (Linksys) issues with using Lync and accessing some sharepoint sites that are internal to my company's network. I am connecting to the Internet using a Linksys router (WRT400N).  When I have my work laptop using RESCUE GFE hardwired directly to the modem - and then connecting to VPN - I can connect to Lync and work normally. However, when I move connection via the router - I can no longer connect to Lync nor access some Sharepoints.  I can access VPN fine but with Lync I get an error stating "Your Lync account does not allow access from outside your organization's network.  Please connect to your organization's network and try again.  However, I am connected via the VPN.this connection worked with a prior laptop using WinXP (I am no on Win7) and the connection thru router and using VPN worked with Communicator.I unfortunately had to reset my router - so I cannot recall if there were port settings established from the last time I had to set up the network.  I didn't save the configuration; note to self - save configuration in future.

View 1 Replies View Related

Linksys Wireless Router :: WRT160N Remote Access

Mar 23, 2010

  Even when I disable remote access, people still can get to my router login by typing my external IP.  Is there anything I can do to stop this?

View 5 Replies View Related

Linksys Cable / DSL :: Remote Access To WAG320n To Reset?

May 27, 2011

I access my home computers via teamviewer or logmein. My router is a Wag320n
 
Sometimes my internet connection is lost and if I'm home, I just reset it and the internet is on again.
 
But when I am away and the internet connection is lost, I can not access my computer. If only I could reset it, I would be able to access the computers I am trying to find a solution to do this.
 
Practically when the internet connection is lost, the modem does not get an IP from the ISP right? And when this IP is not assigned, there is no way of connecting to the router itself right? Is there a way of pinging or resetting or accessing a modem that is connected to he phone line? I think it is impossible. Or maybe it is possible via some MAC address search or sniffer or I don't know.
 
Another option would be to somehow have the modem reset, let's say every hour automatically so that the max time I would not be able to accss my computers remotely would be 1 hour.

View 3 Replies View Related

Linksys Wireless Router :: WRT54G - Remote Access (VPN And RDP)

Nov 29, 2011

I'm using a Linksys WRT54G in my home and I have it set up to allow me to connect remotely (VPN and RDP) from work. I do this every day and it works perfectly. The problem I'm having, though, is that every morning it doesn't work until my wife wakes up her laptop. After that it works fine, whether her laptop is on or off. It behaves as if the router is "asleep," and when she generates some local network activity, it wakes up, thus allowing me remote access.
 
I believe it's a router issue and not a computer issue because not only does it affect VPN and RDP, but even the router's remote management interface is unavailable until this happens.
 
Some more details about my home setup. I have a fixed IP address assigned to me by my ISP . All computers connect to the router wireless VPN and RDP is routed to a desktop computer running XP SP3 that is always on (it never goes to sleep or hibernates)The router is enabled as a DHCP server (192.168.0.2 thru 11)The desktop computer is set up with a fixed IP address (192.168.0.100)The router is set up to forward VPN and RDP traffic to the desktop . Here's some screenshots that may be useful.
 
Basic Setup  Port Range Forward Management
 
Pretty much every other setting is defaulted. Like I said at the start, my setup works perfectly and I'm very happy with it. I just can't figure out why every morning it doesn't work until my wife uses her laptop?
 
When I'm at work, hers is the only computer on the local network getting assigned an IP by the router. Until she turns on her laptop, the DHCP client list is empty. Could it be that the router needs at least one connected device assigned an IP by its DHCP service in order for it to receive external connections?

View 6 Replies View Related

Cisco :: 3200 Which Versions Of Windows Can Perform Best With Works

Aug 3, 2011

We have 3200 logical devices configured on CiscoWorks and CiscoWorks is running very very slow. CiscoWorks installed on server with Windows Server 2003 32-bit and this version of windows it can only support RAM up to 4GB, which is already installed. In order to increase the RAM we have to upgrade the windows version as well. Which versions of Window can perform best with CiscoWorks.  E.g. Windows Server 2003 with Service Pack 1 (SP1), Standard Edition 64-bit: or Windows server 2008 etc. We are currently using the LMS 3.2, RME 4.3.0, CM 5.2.1

View 2 Replies View Related

Cisco :: 3200 - How Much RAM Required On Server Hosting Works

Aug 7, 2011

how much RAM is requied on server hosting CiscoWorks. Our CiscoWorks is running like snail. We have 3200 logical devices configured on it. Specially browing different pages of CiscoWorks is very very slow.
 
how big hard drive will be enough for CiscoWorks with below applications installaed and configured with 3200 devices.. Currently we have 65GB Harddrive and its 85% full.
 
Server Platform: Windows 2003 server 32-bit
Server RAM: 4GB
Hard Drive: 63GB-CiscoWorks is installed on this Harddrive.
Another Partition of Harddrive is 130GB and its 100% free.
 
LMS: 3.2.1
RME: 4.3.1
CM:5.2.1

View 2 Replies View Related

Linksys Wireless Router :: E3200 - Trying To Enable Remote Access?

Jan 31, 2013

When I try to enable remote management on my Linksys E3200 I get an "illegal value" message.  Is there something else I need to change

View 2 Replies View Related

Linksys Wireless Router :: E3000 Remote External Hdd Access

Jan 14, 2011

I have an e300 router with my external hdd connected via the USB port. I am trying to figure out how to access the hdd remotely. I am not trying to get to it through remote desktop access. I have my laptop that I take with me when away from home but I would like to be able to access the hdd via Internet.

View 4 Replies View Related

Linksys Wired Router :: Remote Access To LAN And Cannot Connect To RVS4000

May 31, 2012

I am trying to connect a LAN to the internet via an RVS4000 for remote access to the LAN and cannot connect to the RVS4000.  I am using a static WAN address, entered it in the WAN setup area (subnet, gateway, etc.).  I do not use DHCP as all the LAN units are static addressed.  I rebooted, etc. but cannot see the router externally (I am pinging from a remote site).If I plug my laptop into the WAN cable and set the laptop to the WAN adress, I have no issues.  I have checked the cables (all CAT5e shielded), checked both straight through and crossover cables, and have no luck.

View 1 Replies View Related

Linksys Wireless Router :: E1200 - Cannot Access Remote Viewing

Nov 30, 2012

I have a Linksys E1200 router.My problem is I have installed a camera system that allows remote viewing.I cannot access the system through the E1200 I am not very knowledgeable in net working.What do I need to do to access the DVR from a remote computer?

View 1 Replies View Related

Linksys Wireless Router :: Possible Remote Access To E3000 Unit

Jan 26, 2012

For a while now I've been thinking of setting up a (hopefully) secure remote access from a location outside of my local network. Since I'm going to be away from where I usually live for about six months due to the location of my Course that I'm going to study, I want to be able to remotely access the router if something were to happen. Up until this point, I've been doing the management through a Teamviewer 6/7 remote access with my home computer and connecting from the inside IP address (Example: 192.168.1.1), but it's going to be taken away so I wouldn't be able to do that this year. Is it possible to set up a secure telnet on a Linksys E3000 Wireless Unit that way I can control it through Command Prompt, or would I have to set up Remote Management Access to use the unit outside the network through programs like Internet Explorer or Mozilla Firefox?

View 1 Replies View Related

Linksys Wireless Router :: E4200 - How To Access USB Hard Drive Remote

Aug 11, 2011

I just purchased a Linksys e4200 router today along with a WD 2TB MyBook hard drive. My intent is to set these two up together so that i can share files on the hard drive with: Computers on my home network ( 1 Windows 7 desktop wired, 1 windows 7 laptop wifi, 1 XP netbook wifi)Computers remotely over the internetSmartphones (Android and Apple) on my home networkSmartphones (Android and Apple) remotely over the internet. My questions are: Set-up remote access for fileshare with smartphones?What is the easiest way to set-up and configure this?

View 9 Replies View Related

Linksys Wireless Router :: E4200 Remote Web Access To Server Is Blocked

Dec 11, 2011

I'm setting up WHS 2011 for the first time.  When attempting to set up Remote Web Access, WHS continues to recoginze my E4200 model information and router IP address but delivers the message 'Remote Web Access to Your Server is Blocked'.  Cisco and MS say the router is compatible with WHS and that it should set up through the wizard but no luck following many attempts, including manual set up of DHCP Reservation and Single Port Forwarding on ports 80/443 (not sure I did this correctly).
 
I've taken the router back to default settings with the exception of enabling Remote Management under the Remote Management Access section of the Administration menu tab; tried again with the same result.  What settings to change to make this work?

View 7 Replies View Related

Linksys Won't Let Me Access Its Setup Page Now

Aug 29, 2012

when i was on my linksys setup page 192.168.1.1 i accedently disabled wireless web access now i cant undo it so now i cant use wifi

View 1 Replies View Related

Linksys Wireless Router :: EA2700 Port Forwarding To Remote Access IP Camera?

Feb 7, 2013

I am wanting to access my IP camera over the Internet. I am not a computer wiz by any stretch and after a couple of failed attempts. My ISP is Comcast and they say that I have dynamic dns and should have no issues viewing my cameras. I know how to get to the port forwarding area of the router but am confused as to which ports to forward. The set up instructions for the camera (Airsight) suck. Screen shots of the set up don't match the actual router

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved