Sprint AIRAVE Airvana And Port Forwarding?
Aug 2, 2012
Our home has poor cell reception, so Sprint sent us one of their Airaves to fix the problem, but in doing so it's opened another for me. I used to be able to open ports and host applications for people to connect to, but after installing the Airave this is no longer possible.Even if the ports are opened on the router (a D-Link) and an "ALLOW always" rule added to the Airave, the port still registers as being closed whenever I check it or host something. What gives? Is there a way I can make the Airave's firewall be ignored entirely or something? I just miss being able to host games.
View 2 Replies
ADVERTISEMENT
Apr 7, 2013
I am trying to open up port 32400 on my 881w Cisco router but I have not had any success I need to configure manual port-forward to enable my Plex Media server.
View 1 Replies
View Related
Apr 22, 2013
how to: port forwarding to 2 different destinations based on incoming WAN port
The default HTTP service works fine: TCP80/80-> 192.168.0.55
I have a couple of IP security camera's I'd like to be able to access remotely that also listen on port 80. I tried TCP & UDP 8009/8009-> 192.168.0.9 without any luck. Not sure how to handle the port redirects on the RV042G? Seems simple and was on the Symantec, could be user training :-)
I was able to do port redirect with the Symantec Firewall I'm replacing.
View 2 Replies
View Related
Mar 7, 2013
Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 0.11 v000c.0 Build 121203 Rel.46289n
ISP : Virgin Media
Is there any way of forwarding an external port to a different internal port on the TD-8970 ?I saw a question posed on an Australian forum implying that it might be provided in a later firmware release.Our TD- 8970 has replaced a previous NetGear WAG 320N which had this facility, and is useful to provide access to multiple machines without having to modify each individually to use a different port.
View 1 Replies
View Related
Dec 2, 2011
So here is my network.
ASA5505--->Cisco1841--->Cat2960
Code
ASA asa831-k8.bin
Cisco 1841 c1841-adventerprisek9-mz.151-4.M2.bin
Cat 2960 c2960-lanbasek9-mz.122-55.SE1.bin
and here is my dilemma.
I can SSH from the internet to my ASA on default port 22, directly to my public IP. I can SSH from the internet to my Cisco 1841 on port 2001. I can not however, SSH to my Cat 2960. From what i can tell, on the Cat2960 i can't change the default port 22 for SSH to different port, just like i did on the Cisco 1841. I looked to see if I can change the default port for SSH on he ASA, it does not look like this is an option.
The bottom line is that i want to be able to SSH to all three devices from the internet. I only have one public IP. As of now, what i can do is only SSH to the ASA on default port 22 directly to the public IP and Cisco 1841 on port 2001. It appears that changing the default SSH port on Cat 2960 is not an option. It also appears that I can't change the default SSH port on the ASA, if i could, i would and then i should be able to SSH to the Cat 2960 on port 22. No matter what i did on the ASA, it always listens on port 22 for SSH connections.
show asp table socket
TCP 001f549f <<pub IP>>:22 0.0.0.0:* LISTEN
how do i make it listen on different port?
Here is relevent config for SSH for cisco 1841 (port forwarding)
ON ASA
object network ROUTER
host 10.10.1.1
[Code].....
View 28 Replies
View Related
Oct 11, 2012
Is it possible to create a service which will forward public port 9010 to an internal IP address with port 23 ?
First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80
View 2 Replies
View Related
Feb 16, 2011
I am having an issue opening a port (4040) on the 655 for my Fedora-based subsonic server. Inside the LAN, I can see the device from other peer machines, so I am confident the port is open and listening. However, I can't seem to get to the machine-port from outside/internet.
I have tried Virtual Server and Port Forwarding with single port. The server has a stactic IP which I've included in the DHCP range and outside the range. I have a DSL connection (AT&T), modem only. I have updated firmware. I have exhausted the Subsonic community's knowledge, everything points to the router, but all the settings seem correct. What am I missing? Is if possible there is a defect in the router? (don't laugh). Is there a way to trace a request to that port to see where it is hanging?
(yes, I've STFA, but don't know what else to do).
View 2 Replies
View Related
Jul 16, 2011
I have always used netgear routers in the past. After a series of issues regarding configurations not working correctly I invested in what appeared to be a semi pro router, the cisco linksys e4200.
I have a centralized server which I use to access a mass of different services such as mail, dns, VPN, FTP, Kerberos, http and many more. While I am not a massive networking ****, this server setup is like my garage project. To access these services externally to my LAN as far as I understand I would need to configure port forwarding for each service to my server. Unfortunately the control panel for the linksys E4200 only offers about 15 custom port fields for forwarding, and some documentation I have read shows that with it's basic install my server could be using up to 60 ports at once.
Is this router just not suitable for this sort of network. If so I will be very disappointed because I have spent a quarter of the price on netgear routers with more control than this.
View 1 Replies
View Related
Apr 13, 2013
I've set up port forwarding from an external port (9000) to an internal port (80) on our SRP541W, and for some reason, it's not working externally. If I access the public address from within the internal network, it works properly.
View 6 Replies
View Related
Jul 31, 2011
I want to create a Counter Strike Server and need to open some ports for that.The Problem: I cannot seem to open the ports for gaming.The Modem Setup: My Firewall is disabled.My guess is that, this is the area with the problem. I guess my modem is not forwarding onwards.The Problem: I tried checking my ports with websites like URL etc.It cannot access my port.
View 1 Replies
View Related
Aug 7, 2011
I have a DSL-524B from D-Link. My problem is, whenever I Port Forward port 80 to my comp's IP to host a web server, all the other computers connected to the router are unable to access the Internet. So, I set up no-ip to use port 8080, but, this exposes my ip and even when masking, if you look at the HTML code, you get the ip.I need to know how to open up port 80 without restricting Internet access to only my comp, or any other work around.
View 7 Replies
View Related
Nov 6, 2011
Can I use my sprint with my Verizon plan ?
View 1 Replies
View Related
Mar 30, 2011
I am currently a student in a computer repair class and have recieved an assignment for troubleshooting a network through a Sprint overdrive device. The current setup in the room (which worked with a previous device but not the same model) is the internet going into the server VIA ethernet port and sent back out through the server into a switch. From there it connects to another switch that connects roughly 10 computers. The overdrive device is a WiFi hotspot device and the director of the network wants me to make the network with the ability of connecting to the internet through the Device. We have placed a Wireless USB device on the server to recieve the signal from the Overdrive device. The server can connect to the internet. When we try to send the signal out from the server we get a IP conflict. I have tried switching the IP's and still do not get it to work.
View 3 Replies
View Related
Mar 2, 2013
Region : UnitedStates
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3,14.2 build 120822 rel.40902n
ISP : Sprint
Been working on this for about a week now, still no success. I confirmed I am using the latest update version/build.Trying to connect to my Ipad. TPLink Software says Identified, but only goes toward "Connecting" and never connects.All the ISP/Subnet numbers are "0". Set to 3g/4g only setting. Tried with security password and with security disabled.Customer support asked me to call Sprint to confirm dial number is #777 and that is confirmed. Sprint also confirmed APN is not needed to connect to a wireless router using a USB modem (this is a U600, which is on the TPLink compatable list). There is some internet posting that says the APN for Sprint is internet.com but I tried this too, and it still wont connect.
View 1 Replies
View Related
Apr 20, 2012
I am trying to connect my Dell Dimension E310 to WiFi using my Sprint Sierra 589 USB adapter but I am not able to get through.i have installed Sprint S/w for connecting WiFi using the USB adapter. After I connect USB adapter, it shows Wireless connection icon in right bottom but when I right click to wireless network connection in Network connections - it gives me on 2 options - General & Advanced. I don't see Wireless Network tab.If connect the Sprint card to my laptop & try to connect the laptopn, it works. The internet on laptop get connected using Sprint Card instead of my laptop existing card which indicates the Sprint card is working. how to make above successful OR I need to purchanse new WiFi adapter which can connect to Dell E310 (after googling some adapters, found few WiFi adapters which work on XP)
View 4 Replies
View Related
Feb 2, 2012
I currently have a 4 year old Dell XPS M1530 that recently died due to an rough impact. About to buy a new Dell XPS 15 and was wondering if I can easily swap my Sprint Mobile Broadband Card between the two. And if so would I only need to download a new driver for it? I am currently grandfathered in with Unlimited Data on my current card plan and I would hate to have to get a new one requiring a new contract with Limited Data.
View 1 Replies
View Related
Mar 8, 2012
I have a WRT300N wireless router that was working fine until I tried hooking up an Air ave Access Point for Sprint. Now the router doesn't work at all - even the hard wired connections don't work. I tried the usual - unplugging, plugging back in, disconnecting, reconnecting, hitting the reset button - nada.
Removing the Air ave Access Point doesn't matter - it still doesn't work when I put it back the way I had it before. The only way I can get a signal to my computer is to plug it directly into the modem, bypassing the router.
View 1 Replies
View Related
Nov 10, 2012
I was at a friend's office today trying to get the IP cameras working but forwarding the ports seems not to work with his current modem from ATT (a Westwell F90 or something). Would the workaround for this be purchasing a third party modem instead that supports port forwarding and stop leasing the Westwell F90 from ATT?
edit: the modem is hooked up to a DI-524 from D-Link and i already forwarded different ports to see if it was specifically port 80, 1024 etc
View 2 Replies
View Related
Oct 21, 2011
[code]...
How do i setup port forwarding in server 2008?? I have heard numerous ways of doing this through windows firewall, NAT and setting up static routes. Not of which i can get working.
View 2 Replies
View Related
Apr 1, 2012
I finally got my Cisco Pix 501 working on my network and everything is working great! However, I do host game servers on occasion and I have a 24/7 FTP server up and as of now, I can't connect to it because the PIX is blocking the ports!I have zero experience with Cisco, so I need step-by-step instructions on what commands to enter to get this thing working!
View 5 Replies
View Related
Mar 12, 2011
I am very confused now. I got my 5505 for home (basic) and loaded up 8.4(1) fresh. From the inside interface I can reach the internet no problem but I am having issues trying to get my port forwarding to work with torrent. inside host is 10.100.130.5 port is 26883, I have been trying to configure this forever.
View 9 Replies
View Related
Jul 7, 2012
I am trying to make a server in the game Halo combat evolved for the PC, but i need to forward 3 ports, ports: 80, 2302, and 2303, i did them all, but it still says they are all still closed, when I scan them or they say, its times out.I have a D-Link router.
View 5 Replies
View Related
May 25, 2012
I need to set a static IP for port forwarding so my clients can connect directly to my server. I kept losing people because my IP address would change every week. I use version MI424WR router and know my Mac address but do not know which IP address I should set it to.
View 6 Replies
View Related
Nov 18, 2011
I have a computer connected through wifi to the internet.I then turn on the computer into ICS mode and connect that to my PS3/Xbox.I'm trying to get an OPEN NAT type but just can't seem to get it working.I've read a few different pages and have tried some things but it's never worked.I've heard of bridging connections and the sort but I'm not familiar with it. I just want to get an OPEN NAT on my PS3/Xbox.
View 10 Replies
View Related
Sep 25, 2012
To configure DSL port forwarding,I want to configure as remote desktop.
View 3 Replies
View Related
Apr 1, 2012
I finally got my Cisco Pix 501 working on my network and everything is working great! However, I do host game servers on occasion and I have a 24/7 FTP server up and as of now, I can't connect to it because the PIX is blocking the ports!
View 12 Replies
View Related
Feb 14, 2011
I have Infinity so don't know if that's an issue in my situation. I know I'm being "throttled" by BT when doing P2P downloads so limit this to off peak periods.I have made the recommended tweaks to Utorrent to speed things up and finished off today by port forwarding. I tried to follow the tut I was using to the letter but the download became even slower!! You have to enter the port number in the Hub settings but I wasn't sure whether it was a single number xyz or a range 0-xyz or even xyz-xyz. I really hope I'm making sense.I also wasn't sure whether it's TCP or one of the other options I should have selected. I'm currently on Infinity getting 37.4 Mbps download and 1.7 Mbps upload.
View 8 Replies
View Related
Apr 6, 2011
We have the above router for a small business and I want to configure VPN to port forward to the server so it can handle the VPN traffic through Routing and Remote Access.I have configured port forwarding on SMTP, RWW and other protocols successfully but VPN will not work.Within the built in web interface on the Cisco it advised that if I want to configure VPN I need to use Cisco Config Pro. I have had a look through this software but it looked to only support the router as the VPN gateway rather than port forwarding to a server.
View 9 Replies
View Related
Jul 10, 2007
I have recently purchased a Cisco 871 router. In the GUI from the installed software, I have been able to configure which ports are forwarded to a specified IP address within my local area network. This seems to output a configuration line like this:
ip nat inside source static tcp 192.168.1.123 1000 interface Dialer0 1000
However, I can only do this one port at a time. Is there a function or command that I can use to specify a range of ports? For example, I would like to forward tcp ports 1000-2300 to the IP address 192.168.1.123
View 12 Replies
View Related
Sep 2, 2012
I have the following configuration in my ASA 5505 and I'm having problems connecting with other players on my XBox.
I think my problem is that I need to forward ports tcp:3074, udp:3074, and udp:88 to my xbox which is at 192.168.2.50 (vlan 3 below).
View 3 Replies
View Related
Feb 11, 2012
command for port forwarding to a few applications (inside hosts) when you only have one Static IP (Public) which is used for many to one NAT (Overloading)?This is the config for the many to one NAT.access-list 1 permit 172.16.0.0 0.0.255.255 ip nat inside source list 1 interface Dialer1 overload What command is necessary to forward ports to certain applications?
View 1 Replies
View Related
Jun 28, 2011
I am trying to setup Internet based CCTV system on a router that has a VPN network in place. Am i able to forward the Media and Web Ports to the router without interfering with the current VPN settings.
View 4 Replies
View Related
Mar 11, 2011
Before I get into asking questions about the routers, firewall, and static IP though I want to knock out the most base problem. I plugged a computer directly into my cable modem, disabled the windows firewall, tried canyouseeme.org, and couldn't connect to any ports anywhere in the spectrum. I would assume that being plugged directly into the modem that all ports should be wide open. The port I was originally trying to open was 8093. I called my cable provider and the tech told me that I'm not allowed to have port forwarding in a range as high as 8093 without a business account. I asked the tech what range I could use and he said he didn't know. I did some searching on the net and found that on a typical home cable connection I'm allowed ports 1 through 1024, so I tried numbers all over that spectrum on canyouseeme.org and got no response from any of them. Again, this was while plugged directly into my cable modem with an ethernet cable and my windows firewall disabled. From what I know this has to be wrong in some way, as to use the internet at all I have to have ports available. The only possibility I can think of is that maybe canyouseeme.org is flawed in some way. So the first in a long series of questions to come is why am I unable to find any open ports while plugged directly into my cable modem with my windows firewall disabled?
View 1 Replies
View Related
