Switch To Connect Various Devices To One Computer?
Mar 7, 2013
I would like to allow a single computer to easily operate laser scanners one after another. A single laser scanner can create an ip address for it's "network" that a computer can connect to through an ethernet cable.Is it possible to connect a computer to the input port of a switch and to connect the laser scanners to the multiple output ports, then individually access the ports by connecting to each laser scanner's respective ip address?
View 2 Replies
ADVERTISEMENT
Dec 3, 2012
Does the wifi switch have to be on for a bluetooth device to connect with this computer? That is the only way I can get it to connect, but I have been told, maybe in error, that you shouldn't have to have the wifi on to do so. When my wireless adapter switch is on, my bluetooth device does connect to the computer but in the Windows Mobility Center it does show the bluetooth icon even though it is showing up in the taskbar.
View 9 Replies
View Related
Oct 11, 2012
All of a sudden my laptop, android phone and blu ray player (all wireless devices) can't communicate with my wired devices (marantz receiver and samsung tv). Everything still connects to the internet independently but i can't for instance play music from my wireless laptop to my wired marantz receiver. I had no trouble with this last week and didn't change anything (that I'm aware of) I did get Verizon to switch out my router but it didn't solve anything. My wife's computer also cannot connect to wired devices. Lastly, if I connect my laptop with via ethernet cable it sees wired devices fine. I tried shutting off windows firewall but didn't work. I have no other firewall/virus software installed. I can ping to all devices (wired and wireless) from my laptop.
View 1 Replies
View Related
Jun 10, 2012
It started happening back in around November, my sister and my computer would start freezing occasionally, slurring the audio into a robotic sound, eventually to come to.It gradually got worse, and I assumed it was a graphics card problem since it would freeze ONLY SOMETIMES and say that the graphics driver stopped working and has recovered. It usually didn't say that, though.Lately though, I noticed that when it would freeze sometimes the internet would go out for some connected devices, such as the Xbox 360. The only computer that was NEVER affected by this is the one connected directly by Ethernet to the Netgear router, (every other device is WiFi.)
Sometimes even, my sister and mine would freeze simultaneously. It was a sort of rare occurrence, though.I very lately started to notice that it would freeze when trying to load internet components with larger amounts of data, such as server console logs, Flash videos, and Soundcloud players. What threw me off is that it would sometimes freeze in programs like FL Studio or Windows Media Player... It's possible I guess that the programs were unrelated and what caused the freeze is SOMETHING sending/receiving corrupt packets.
View 6 Replies
View Related
Mar 1, 2012
I recently change routers to a Linksys E3000 wireless router from a Uverese 2wire residential gateway and all worked well for a short time nothing changed however when I go to view network devices from Win7,Vista or XP computers the network devices are no longer there. when I shut down and reboot the router and switches I still cannot see these devices, however when I hook up my old 2wire router I see my devices again. Even when I reconnect to the E3000 all the devices can be viewed for a few hours. Changing routers resets something but maybe overloads the linksys E3000 after a few hours? maybe this E3000 is just defective?
When I view a network map in Network & Internet all the devices appear in the map The configuration is Linksys E3000 router with two (2) 8 port Trendnet gigabyte switches and One (1) 8 port Trendnet Poe 10/100 switch. They are chained router to 8 port gig to 8 port gig to 8 port Poe 10/100. Prior to this I had the router to each switch separately - - this does not seem to matter works the same either way
Devices attached - Network printer,XP desktop, Vista Desktop, NAS, WDTVlive media player, Roku, Home automation controller, IP touch screen for the automation, security DVR (wireless devices are all ok Win7 laptop, Vista laptop, Ipad)seldom are more than 3 devices being used at one time light traffic.)
View 2 Replies
View Related
Sep 4, 2012
I just now installed a new EA4500 Router. It installed itself automatically without a problem, by running the setup CD. No devices other than my hard wired computer and modem are connected yet.
When I went into Start > Cisco Connect to look around and check it's version, etc., I immediately got a "There's an important update for your router" notice. My concern is not wanting to install The Cloud at this time (although I wouldn't rule it out later). There has not been a trace of it so far.
I currently have Firmware Version: 2.0.36.126507 and Software Version: 1.4.12100.0. What this Important Update may be? Is it the "dreaded" Cloud? I'd rather avoid the whole rolling back to pre-Cloud issue for now, if possible.
View 6 Replies
View Related
Jul 3, 2011
When i am in report generator to create a unused up report i have any of my devices in the devices selector menu. This a same for all reports of the switchport menu. But for the other menu like inventory performance my devices appeard. I make a reboot of my server but no change. I'm looking the logs.
View 4 Replies
View Related
Mar 1, 2013
In my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
View 12 Replies
View Related
Jun 21, 2012
am running a sony vaio VGN_B1XP using windows xp proffesional. My problem is every time I switch my wireless lan switch on my computer trips off it flashes a blue page of writing that I do not have time to read. It then reboots itself.
View 1 Replies
View Related
Jul 29, 2012
We have 2 internet providers and I would like to find some way to switch our 5 computers between the 2 internets without having to unplug the ethernet cables everytime someone wants to switch. Is there some type of switch we can buy for each computer to do this or is there no such thing?
View 8 Replies
View Related
Mar 27, 2013
I have a Sony Vaio and it has been working fine and it Suddenly just disconnected itself from the wireless connection. I did troubleshoot and it fixed itself but it done it again minutes later and simple said a cable was disconnected. I restarted the laptop and it came on fine but it disconnected again and has not worked since. I have gone into the wireless connection settings and it says wireless isn't enabled. The switch is on and illuminated. I've switched it on and off. I have also done a system restore from a previous update just to be sure but there is no change?
View 14 Replies
View Related
Feb 21, 2013
I bought a "Nexxt Solutions 8 ports Ethernet Switch" and it only allows me to use the internet on the first computer that I plug into one of the Lan ports. I get a Limited Connection MessageI did some research and found something about a DHCP Server and automatic IP assignment, but I can't find a comprehensive tutorial on how to setup this.I'm sure the solution is simple.
View 2 Replies
View Related
Jun 21, 2012
I'm trying to use MRTG and SNMP on a Windows Serveur 2008R2.I want to manage my Switch with mrtg, but it don't show me which computers or server are connected to the Switch's ports.All I have, in the .cfg file is the interface name ( like S0/0 ), which are useless for me, I would like to get IP adresses or hostname but mrtg doesn't seems to do it.Any of you know if Mrtg can do that ? or maybe there are some others ways to do that ?
View 1 Replies
View Related
Nov 14, 2012
My internet down my road went out a while ago for a week and it came back on fine but ever since the B.T. tech came over after to check the router it's been only allowing a couple of devices on at a time!I know it's not the devices because if I keep turning my router off and on it will work eventually but when reset then something else can't connect.Here is the details from a pc that i've got connected:Windows IP ConfigurationWireless LAN adapter Wireless Network Connection[CODE]
View 14 Replies
View Related
Sep 29, 2012
My laptop stopped connecting to the Internet eventhough our other laptop has no issue - tried resetting modem, router and bypassing router -- it shows my wireless network and says its connected as local only - tried TCP/IP reset and restarted but still same, when i did the winsock, ipv4, ipv6 command prompt i get an error on the ipv4 - resetting echo request failed? I also tried uninstalling my network adapters in safe mode and restarting but same issue still
View 7 Replies
View Related
Apr 19, 2012
My laptop won't connect to my wifi. No idea why. I've restarted it, the router and the modem but it didnt work. Thing is it says that it can pick up signal on my wifi but it won't connect. The desktop computer works fine and mom's Nook connects to wifi and works fine, it's just my laptop not working. I've also tried connecting it directly to the modem and it still won't connect.
View 5 Replies
View Related
Sep 26, 2012
During the summer we had three laptops and an iPod. Two of the laptops and the iPod were having trouble connecting to the Internet, but I thought that was because we had too many devices but I looked it up and most sites said that wasn't true.
Now we have two laptops and the iPod and there are still problems so I thought it was a modem issue. It's a Webstar DPC2100R2 and when the Up and Down lights go off our wireless has trouble but if I use cord which goes through a D-Link DIR-615, the Internet is fine. When the lights go out I usually turn off both devices and turn them back on after about a minute and that usually works.But then, the lights didn't come back on so I called my Cox, my provider and they did something that fixed for about a week then the two lights went out again. Yesterday I reset them again and my Acer Aspire connected and so did my iPod but my HP Pavilion couldn't so I reset it again. Now my HP and iPod work but my Acer doesn't even though I've reset it multiple times.
What's weird is that the HP never has any trouble connecting, even when the lights aren't on or when my iPod, Acer and my sister's Dell couldn't.
View 6 Replies
View Related
Feb 8, 2013
I just upgraded to GS605 Netgear gigabyte switches on my network, and I use Cat 5e cables, so I can use the gigabit Ethernet.
One of my Windows PCs seems to have a very slow connection. I see an active 1K link on the switch for this port, and Windows reports that the link is running at 1 Gbps, but the computer takes 3-5 minutes to load Amazon.com and has ping times on the order of 700 ms.
I have another Windows 8 PC that works perfectly fine, and I have a Mac mini which is also connected to the switch and works fine.
If I take the Ethernet cable from the messed up computer and connect it directly to the router (not the switch), it is fast again. However, connected to the router, I'm back to 100 Mbps speeds, not gigabit speeds.ipconfig gives the following output:
-Hostname: my computer's hostname
-Node type: hybrid
-IP routing enabled: no
-WINS proxy enabled: no
-IP address: my computer's DHCP address
-MAC address: my computer's MAC address
-Default gateway: my router's IP
-DHCP server address: my router's address
-IPv6 address: something long (I'm not familiar with IPv6 addresses)
-Various tunneling adapters, which are all disabled
I have had other computers in the same port on the switch and they all work fine. I also plugged this computer into a different port and had the same problem. Netgear tech support wasn't useful.I actually have another switch of the same model, but when I replaced this one with that one, it had the same problem.
I confirmed gigabit speeds between two other computers, both connected to this switch, so it does work at those speeds. Those computers also have fast Internet.I don't have any clones MAC addresses in my network, and as for logs.... the only place I can think is the log file from the router. I didn't even think of that, the only other place would be event viewer within windows.This computer dual boots Windows 7 and Windows 8, and has these issues in both OSes.
View 1 Replies
View Related
Jul 29, 2012
Can not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.
View 8 Replies
View Related
Sep 3, 2011
I just bout a lynksys wireless adapter to connect my dvr to the internet. I would also like to connect my Blu Ray player. Can I do this with an 'ethernet splitter'?
View 1 Replies
View Related
Jun 3, 2012
Our wireless has worked fine over the past couple of years, both mine and my mom's laptops having no problem connecting. We bought Roku not long ago, which connects your tv to the internet so you can use netflix, hulu, etc., and it had no problem connecting. Now, it just stopped connecting. It detects the network but just wont connect to it. The password is right and everything. We also have this problem with an iPod touch, tablet, smartphone, and wii.
View 2 Replies
View Related
Sep 2, 2012
All other devices can connect to wifi, but windows xp can'tI have tried resetting the router, as well as the wifi connection on the xp, but nothing works.
View 14 Replies
View Related
Oct 26, 2011
I will be connected to the internet and then it seems at random i will lose connection. It says Im still connected to the network and I have 5 bars however it says im not connected to the internet. When I trouble shoot the connection it says that I cannot connect to the primary DNS server. This is occurring on all devices wired and wireless that are connected to this network. I have updated the firmware on my wireless router but not on my modem since COX has to do that.
View 1 Replies
View Related
Jan 7, 2012
My wireless devices are having a hard time connecting though my router. They see the router and can connect to it but cannot get on the internet. When I go into my router and check Wireless Status to see connected devices the window is empty. Usually if I reboot my router some of my devices will connect but if I leave them idle for any amount of time the connection is dropped. Suggestions. I have Dell 530 desktop running Vist Home Premium and the router is Dlink Dir 615. The desktop has no issues connecting to the internet as it is connected through LAN port
View 2 Replies
View Related
Mar 26, 2011
I have a Linksys WRT54GS router. It has been performing fine for many years. We have 2 PCs and 2 MacBooks that get on the wifi network with no problem. However, several months ago, a friend could not get his iPad online. Last week, a guest with a PC couldn't get online. I just bought an iPhone and it can't get online either. In all 3 cases, the devices found the network but when we typed the correct password the devices were unable to connect. The 4 laptops connect with no problem.
how to get my new iPhone and other new devices to connect?
View 3 Replies
View Related
Oct 2, 2012
I want to connect my ps3, sky hd+ box and samsung smart tv. Upstairs is my wireless router and I have connected to this by using a power supply networking adaptor (duvelo). I have since purchased a cheap ethernet switch from ebay and plugged this into the power adaptor connection next to my ps3, sky hd+ and samsung smart tv downstairs. I thought by connecting these 3 devices to the switch (which is connected to the duvelo adaptor) I could have all 3 devices simultaneously connected online. However, I still can only have 1 ethernet cable in the switch at once and hence only connect 1 device at a time.
View 2 Replies
View Related
Jul 29, 2011
I'm trying to connect a few of my devices to the wireless internet at home.
1.Xbox 360
2.Galaxy Tab 10.1
3.My Touch 4g
All of them can recognize the the network they just will not connect. All my freq are good 2.4 or 2.5. WEP Key works no problem, just the minute I try to connect the galaxy tab and cell phone just says "remembered, secured with WPA/WPA2 PSK." The xbox when running the test connection fails as well.
Running vista x64 home premium on HP DV7 1270us.
View 14 Replies
View Related
Jan 3, 2013
I am supposed to be working remotely. My Asus laptop has worked w/out issues at home, work, airport, etc, but it won't work in this house. The Nook connects to the wifi here w/out any problems.
The network box shows four bars and says I'm connected when I pull up the list of possible connections, but then when I troubleshoot it says, "no Internet acces".I have Windows 7 currently.
View 5 Replies
View Related
Jul 11, 2011
i have had a DIR-655 Rev. A router for years now and had no problems connecting my laptop to it well over 150m, the iproducts never got over 65m, i'm OK with that if they just won't but i would like to get there if possible. i went out and picked up a 2nd 655 (rev B) and flashed the bios up to the newest version 2.03NA and went in and mirrored all of the settings from the original router and then replaced the old router with the new one. the old router is not being used at this time though there are plans to use it as an access point later in another part of the house. i have updated the drivers for the wireless N card on my laptop (i can't remember the name of the adapter or the model, i'll provide that when i go home for lunch today). i've tried various settings for security, (i want to use WPA2 only, personal key, AES cipher, channel width 20/40 auto) i've even tried no security and it still won't connect over 65m.
View 14 Replies
View Related
Apr 5, 2012
We can only connect 2 devices at a time. Someone suggested that it may be a setting with my wireless router.
View 2 Replies
View Related
Feb 3, 2013
I have just switched to a new internet provider (UnityMedia in Germany) and they provided me with a CISCO cable modem (EPC3208G) and a 'wireless N 150 Home Router DIR-600' (hardware Bx and firmware 2.13). I had to ring the service desk to complete set up. I was told to connect the LAN cable (from the modem) into LAN number 1 rather than 'internet' (in the router). I was also told to change the router IP address to 192.168.0.2. Thereafter the connection to the internet was established (they also asked me to make some other changes which I can no longer recall). However after the phone call with the D-link service desk I attempted to connect my other internet enabled devices (kindle, internet radio and smartphone) and apart from one other laptop nothing can connect to the internet.
View 5 Replies
View Related
Mar 21, 2012
I am currently having issues with the dhcp function on my DIR-615. The issue is some of my devices are never able to connect unless I set them up with static ip. Some of my devices are sometimes able to connect using DHCP but sometimes need to be set up with a static IP. In the log it says something along the lines of "sent out offer for IP 192.168.0.XXX" but the devices never receives the IP. The firmware says it is up to date. The hardware version is C1. Some of the devices having issues are PC's some are Macbooks and some are iphone and ipods. I'm not sure if it is related but when I look at who is using WAN some of the pc's who are connected to the internet have an ip address of 0.0.0.0.
View 3 Replies
View Related
Nov 14, 2012
I just installed this WAP, updated the firmware. Windows computers can connect. iPads and iPhones can't connect. All iOS devices are runnign 6.01. The iPad can see the nework and it says it joins, but it can't browse the Internet. The iPhone does not even see the SSID. The WAP is pretty much at the defaults. I am using WPA personal, 5GHz. The iOS devices were working fine with the Netgear that was installed previousley. I checked this article and the WAP seems to be configured right:
View 1 Replies
View Related
