My laptop won't connect to my wifi. No idea why. I've restarted it, the router and the modem but it didnt work. Thing is it says that it can pick up signal on my wifi but it won't connect. The desktop computer works fine and mom's Nook connects to wifi and works fine, it's just my laptop not working. I've also tried connecting it directly to the modem and it still won't connect.
View 5 RepliesIn my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
All other devices can connect to wifi, but windows xp can'tI have tried resetting the router, as well as the wifi connection on the xp, but nothing works.
View 14 Replies View RelatedI am supposed to be working remotely. My Asus laptop has worked w/out issues at home, work, airport, etc, but it won't work in this house. The Nook connects to the wifi here w/out any problems.
The network box shows four bars and says I'm connected when I pull up the list of possible connections, but then when I troubleshoot it says, "no Internet acces".I have Windows 7 currently.
i've just a D-Link DIR-600 router last month and i successfully installed it and its working great. Until 2 to days ago, my brother told me that he can't conlnect to the wi-fi. I said that its working just fine and told him to just reset his phone. And then, my sister also told me that she can't connect too. I checked their devices like iPhone 4S and iTouch and it says "Unable to join the network....... Also phones of my friends can't connect also. It was just working fine. I haven't changed anything on the router's configuration. I already reset the router, unplug then plug it and its still not working. The router is connected to my laptop and I can still browse the internet. Its the wireless connection that is not.
View 5 Replies View RelatedI cannot connect to the WiFi router, an all-in-one modem+router provided by my ISP. Now, I run an Ethernet cord from the router to my computer: the computer works just fine. As of a day ago, though, none of the home's Apple devices will connect to the network, despite reboots, password retypes, and shouting at them. Each device (two phones and an ipad) can identify my network, but they cannot join. Additionally, there is an old laptop that cannot connect anymore.
View 7 Replies View RelatedI was using the Internet fine lastnight switched on my acer laptop this morning and wasnt connected to the router. I tried connecting but it just fails. I'm still able to connect with my iPad and iPod. I tried uninstalling and reinstalling the network adapter however this fails to successfully install. I've searched for hours but can't find a solution. I'm also unable to reset the router etc because I live in china and the router is in a roommates room whose door is locked.
View 2 Replies View RelatedTo preface this message I need to state that I am functionally illiterate when it comes to any kind of networking. I just replaced an old Linksys wireless-G router with a new Linksys EA6500 router. My needs are as follows: I am connecting 4 desktop computers (two personal and two business) via Ethernet cables. In addition there will be three smart phones, two DVD players and one game console connected wirelessly. In the future I will add a printer, hard drive and more wireless devices. After installing the hardware and running the setup disk all four computers wired with Ethernet cables worked fine (although they are not set up to communicate or share files with one another - they only need to access the internet. My problem is with the wireless connectivity. I cannot get any one of the wireless devices to work.
View 3 Replies View RelatedI have my pc connected to the router with a cable. As soon as I switch it on I can't connect with any of my wireless devices like my laptop, tablet, mobile phone. As soon as I switch off the computer it works fine with all devices.
Is this a setting where the cable connected pc gets preference that I could switch off?
I just installed an older router (WRT120N). Purchased an adapter for desktop and wireless connection for destktop works. Cannot get other devices to use the wifi (iphone, ipod, android phone...). I am at a loss. Saw some suggestions about disabling a Upn or something under the router's LAN properties
View 1 Replies View RelatedWhat the heck is key renewal? And why does it change every 3600 seconds? Does that mean my password will change? If so how do I connect additional devices to my Wi-Fi after the 3600 seconds?
View 3 Replies View RelatedAll of a sudden my laptop, android phone and blu ray player (all wireless devices) can't communicate with my wired devices (marantz receiver and samsung tv). Everything still connects to the internet independently but i can't for instance play music from my wireless laptop to my wired marantz receiver. I had no trouble with this last week and didn't change anything (that I'm aware of) I did get Verizon to switch out my router but it didn't solve anything. My wife's computer also cannot connect to wired devices. Lastly, if I connect my laptop with via ethernet cable it sees wired devices fine. I tried shutting off windows firewall but didn't work. I have no other firewall/virus software installed. I can ping to all devices (wired and wireless) from my laptop.
View 1 Replies View RelatedIn University, the Wifi on my iPod is exceptionally fast. At home, I can't even load a Youtube video (music, no video) without having to give it about 20 minutes to let it buffer half way through, and the same thing on my Android phone. My Laptop is also on the network, but it is no where near as slow. I noticed the internet isn't as slow as Youtube is, so I guess it is just mainly streaming media that is slow. I have the D-Link DIR-185. I don't want to reset it, as it took me ages to get my printer set up on the network but if there are no solutions I might have to. As I am typing, the video has buffered 1/2 of the way there. I type 110WPM, so give it two minutes.
View 4 Replies View RelatedMy laptop isn`t connecting to my home network but my ipod and other computers are.
View 1 Replies View RelatedI have an ADSL connection through Canal Digitaal, which I believe uses the KPN network. My Zyxel 2601 modem/router is usually accessed at 192.168.1.254. The following devices are connected to it: two iphones, a Macbook Air, an Apple TV 3 and a Mac Pro.all devices except the Mac Pro. Looking closer I found in their respective settings that they connect to 192.168. 2.254. All have somehow been assigned IP addresses on the 192.168.2.xxx network. The Mac Pro remains on the 192.168.1.xxx network.Going to 192.168.2.254 launches a login page for a KPN router called Arcadyan ARV7519 which is on ANOTHER SSID than my wifi network. Nevertheless, all my devices say they are connected to my network SSID but with IP addresses in the 192.168.2.xxx range.Does it have to to with the channels used by the respective routers or is there some phishing or such going on? What can I do to ensure that my devices stay on my Zyxel network?Weirdly, the SSID of the Arcadyan router doesn't normally show up in my list of nearby networks. It only shows sometimes.Also - in case it is relevant - when I try to access 192.168.1.254 from my Mac Pro I am able to log in, meaning I reach the welcome page of my Zyxel router though it takes a very long time for it to load.
View 7 Replies View RelatedI've got several devices (two laptops, Xbox, WiiU, Apple TV, 2 ipads, and an iphone) that can connect to my home wifi network just fine. However, when connected it seems these devices cannot communicate with one another.
Homesharing between my iphone/laptop and Apple TV is no longer functioning. Also, I can not sync my windows media player with my Xbox, and I can not connect my iphone to the Xbox using AirMusic.
Here's my hardware: Motorola SB5101U SURFboard modem, Netgear Wireless N WNR2000 router.
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all
[Code]......
What's happened is that after transferring my old PC's data onto my new one, and putting that one in place of my old one, therefore hooking up my modem to it, my wireless devices have been having trouble connecting to the router. Everything's hooked up fine, and it was working perfectly before, but now my devices such as my laptop and Droid Pro can SEE the router (As in connect to it and say that they are getting excellent signal strength), but when I try to open my browser, it asks as if I'm not connected to anything at all. The PC that's wired to the modem through the router works fine, however.
View 14 Replies View Relatedcan i get such settings with which i can connect my dongle with wifi router so that i can connect my tablets and mobile to use the internet of mobile...or is there ny cable available in market which connects the dongle directly to my mobile for using internet>?
View 4 Replies View Relatedwe currently have one desktop PC, two laptops, two HDTVs, and three cell phones. All of them are Wi-Fi compatible. Currently, I have a NetGear WGR614 v8 router courtesy of Comcast.it is possible that I can have all devices sharing the same Wi-Fi network? The desktop PC is connected to the router with CAT-5. The TV in the living room can be connected to the router as well with CAT-5 as the router is less than a foot from the network jack on the back of the TV.The TV in the bedroom has a Wi-Fi ready via USB.My daughter who is off to college owns one of the cell phones a laptop and an XBOX360 which I am not concerned about connecting until she returns home around Christmas.
View 1 Replies View Relatedmy laptop (asus) has been having issues with my WiFi. On startup, the laptop will (usually) connect to the internet fine, but after a few minutes, usually without any specific cause, it will disconnect from the internet, and the toolbar indicator will go from full signal (full bars) to no bars and a yellow triangle, saying limited access. When I try to reconnect, it will say "connecting" for a few seconds and then will say "cannot connect". I have to leave it for a few minutes every time before it will randomly reconnect until the next incident... My other two pc's (one Windows 7 and one Windows xp) do not have this issue, but sometimes other wireless devices in the house (iphone, ipad) will have a problem where the WiFi indicator will show full bars but I will not have internet access. I have to disconnect and reconnect in order for it to work. Again, it happens sporadically with no obvious cause...
IPCONFIG Info:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
[Code]......
My wifi router is linksys WRT300N v1.1 At first my wifi works great with this devices . iphone 4s , ipod touch 4 , hp pavilion dv6 , dell inspirion 1545 . But it don't works with android devices I had a bunch of them samsung galaxy s3 , galaxy nexus , amazon kindle and more ...The android devices connect to wifi but wifi doesn't work for them in browsers I can't open pages there's appears <webpage not available> , but I can use skype on android devices.
View 1 Replies View RelatedThe original network had a Zylex router, Netgear Switch. There was 2 pc's, one XP and Win 7. There is also 3 tills connected too. There is VPN network connected too. This emits a wireless signal to connect to a scanning gun and is also used to administrate the entire network. I was told by the Administrator of that network that it shouldn't interfere with the wifi network.
The job I was requested to do was to install 3 new wall plates as the Win 7 pc was using a Belkin wireless adapter. There was 2 put inside the office where the XP and Win7 pc's are located. The 3rd was just outside the office.
Now all the ethernet connections work 100%. The wifi is another story though. It will show up in the connect too, when you try connect it will disappear/no response from AP/connect then disappear, these are random too. No order to when each is error is displayed. Even when I put in another router the exact same issues happen.
I have tried to connect to both routers wifi when it wasn't plugged into the switch. Just the router's turned on with no cables plugged in separately of course, no joy same issue with both.
Dlink Dir-657 keeps losing internet connection on wifi devices only . the connection remains to the router but no internet .if I disconnect the connection i am unable to reconnect to the router until i reboot it. My internet remains on my network cabled devices .I am running on an empty channel 3 , usually happens 20 to 60 minutes after the router is up . Dlink sent me a replacement refurbished one and this one is doing the same thing . I owned the original one for about 5 months with no problems at all ,no new electronics in the house and have not changed the placement of the router .
View 4 Replies View RelatedThe laptops and the desktop in my home connect perfectly fine to our wifi, but all other devices like our iPhones, iPads, Nintendo DS, Nintendo Wii, and a 2006 hp laptop will either show a connection, but the connection doesn't actually work, or there will be a broken connection shown to our wifi. All these devices (except the Nintendo devices[only because we haven't tried it out]) will connect and perform on wifi elsewhere.We have a d-link router?
View 5 Replies View RelatedMy nexus 7 and my friends nexus phone are both running jellybean 4.1.1 and are unable to connect to our workplace's belkin wireless router. My nexus 7 says "authenticating" then says "network saved" then switches back to "authenticating". My friend's phone just gets stuck on "network saved". My iPhone and most other devices, including a different android phone, are in fact able to connect with no problems. I have tried resetting the router, but I am afraid that is all I will be able to do with regards to the router.
View 3 Replies View RelatedI'm having issue with wireless connection on Belkin router F5D7633-4.Every 1-2 days my router disconnect and reconnect for no apparent reasons. When this happens, it affects it's wifi. All the devices in my house couldn't connect via wireless to this router. The only way to get these devices connected is to manually reboot the router.Do you know how to allow the router to allow many devices connected at same time?
View 2 Replies View RelatedI've done a firmware upgrade to latest version v4.21.5 yet my Wifi still isn't broadcasting for my devices to find and connect as of last night (Aug 5, 2012). This hasn't happened before, so I was hoping it would return but still hasn't started working yet.My iphone just says "unable to connect."
View 4 Replies View RelatedI just purchased a Linksys EA4500 (firmware is up to date). However while it set itself up wonderfully. I cannot get my wireless devices (specifically my apple tv) to see my NAS or my itunes PC, My ipads can access the NAS if i put in the correct address but not automatically.
Everything is connected to my cisco switch that is hardwired (2 xboxes, 2 ps3, 3 tv's, Wii, network audio receiver, 2 NAS, printer, 2 computers, etc). I disabled the Wi-Fi on the bell router. On the wifi are a few ipads, 3 blackberries, 1 iphone, 2 laptops).I am fully aware that the reason the wireless devices cannot see the hardwired equipment is because it is on a different subnet.
However when i try and change the IP address of the router to 192.168.2.2 (putting it on the same subnet) the router must detect a conflict then changes itself to a class A address (10.x.x.x) OR i get an INVALID IP address. As well i have noticed an overall degradation in the speed of my network (all gigabit hardware with cat 6 cabling)
The original network had a Zylex router, Netgear Switch. There was 2 pc's, one XP and Win 7. There is also 3 tills connected too.There is VPN network connected too. This emits a wireless signal to connect to a scanning gun and is also used to administrate the entire network. I was told by the Administrator of that network that it shouldn't interfere with the wifi network.The job I was requested to do was to install 3 new wall plates as the Win 7 pc was using a Belkin wireless adapter. There was 2 put inside the office where the XP and Win7 pc's are located. The 3rd was just outside the office.Now all the ethernet connections work 100%. The wifi is another story though. It will show up in the connect too, when you try connect it will disappear/no response from AP/connect then disappear, these are random too. No order to when each is error is displayed. Even when I put in another router the exact same issues happen.I have tried to connect to both routers wifi when it wasn't plugged into the switch. Just the router's turned on with no cables plugged in separately of course, no joy same issue with both.
View 2 Replies View RelatedMy E3000 has been working fine with 1.0.04 build 6 FW. Recently some devices (kindle, iPad) can't connect to internet while connected to E3000 via WiFi network. Had a look my E3000 router IP is 192.168.0.1 but those problematic devices has IP 192.168.1.XXX allocated by DHCP not sure why. Currently I manually set up static IP 192.168.0.XXX for those devices.
View 1 Replies View RelatedI have a Linksys WAG200G, I only use it for 2 devices a Win 7 PC and an iPad.
Surfing the net is fine, I'm get an average of 30ms when I ping to my local ISP.
But when I try to stream music or movies from my PC to iPad via iTunes, it starts playing for a couple of seconds then it stops, and then it will start again for a few more seconds. I tried pinging from PC to iPad and get a range from 400ms-2500ms.
I'm not sure which settings I need to adjust to make it work correctly.
I have the E1200 and since I installed this router, the wireless download speed on my iPad and iPhone has been only around 4 to 5 Mbps when my other wireless devices could get to 7 Mbps and ethernet gives close to 10 (my ISP gives 10 Mbps max).I know many people experience slow download and normally disabling the WMM would solve the issue. But this doesn't work for me and I've made sure i'm on the latest firmware.
View 5 Replies View RelatedAlthough EA6500 states support for WPA devices it appears that some B devices (like HP Wi-Fi printer PSC 2510) are not supported. The lack of support seems due to the lack of WPA with TKIP encryption, only the newer EAS encryption appears to be available.
View 6 Replies View Related