TypeError - Object Unexpected Error
Jan 3, 2013
On one of my computer i'm having multiple issues. when I am on most websites it pops up " TypeError: object unexpected" or just "object unexpected" and I have to refresh the page for them to go away, but if I hit the back button or go to another section of the web page they pop back up. The same computer is now having connection issues and only has "unidentified network no internet access" as the only option, and after everything I have tried it will not budge on the wifi.
View 1 Replies
ADVERTISEMENT
Apr 4, 2012
erro came with 3722------however after checking date and time i was able to login. AZAD
View 1 Replies
View Related
Apr 7, 2011
I use a CISCO ASA 5505 with ASA 8.3. Everything works fine, but when I type the following line I get an error message:
nat (inside,outside) source dynamic OBJ_SPECIFIC_192-168-1-0 10.1.5.5ERROR: 10.1.5.5 doesn't match an existing object or object-groupI even tried to create the missing object but it did not work. The document also explains how to use ASDM for this configuration. It seems that there an object 10.1.5.5. is created.
This is the output of "show running-config":
ASA Version 8.3(1) !hostname ciscoasaenable password 8Ry2YjIyt7RRXU24 encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 !interface Vlan2 nameif outside security-level 0 ip address 10.1.5.1 255.255.255.0 !interface Ethernet0/0 switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2! interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!ftp mode passiveobject network obj_any subnet 0.0.0.0 0.0.0.0object network
[code]....
View 1 Replies
View Related
Jan 16, 2013
Couple weeks ago installed my ea3500. Am loving its ease of use and features. I also created a smart wifi account. yesterday I tried to remotely log in and got password errors. I have tried all my small arsenal of staple passwords. No go. Today I called Linksys for support. After getting transferred around then having to explain the difference between router local and online passwords, the customer service rep had me create a new account telling me I had not previously done so. Also said if I had, then I wouldnt be able to create another since a router can only have one account associated with it. What the heck, worth a try.
Now, when I try to log in to the web based settings I get 'Unexpected Error 2120.' If i try to log in from my SmartWifi iphone app I get 'No associated networks. the linksys smart wifi account specified does not have associated networks.'
Just to clarify, I can log in locally to the router, but cannot via my smartwifi account.
View 2 Replies
View Related
Oct 3, 2012
I get error 2123 whaen I try to access the Security tab. Also, all my port range forwarding settings are gone, and it will not let me enter any new port forwarding settings.
View 6 Replies
View Related
Apr 6, 2011
webpage error details object required
View 1 Replies
View Related
Oct 30, 2012
Received Error:Object "Dot11BandSelect" does not exist. when configuring the 802.11 settings on a 4400 WLC runing ver. 6.0.196.0
View 1 Replies
View Related
Apr 7, 2013
Does the ASA treat an object-group with a network-object containing a range of IP addresses as a netmask? For example, I can apply this configuration without the ASA throwing any errors though the configuration calls for a 'net mask':
object-group network test
network-object 192.168.0.0 192.168.63.255
?
network-object-group mode commands/options:
A.B.C.D Enter an IPv4 network mask
sh run ob id test
object-group network test
network-object 192.168.0.0 192.168.63.255
I found that in the documentation it requires a netmask as oppose to a range. Is this a bug in the code? I am running code version 8.0(5)23 on a 5520. If this is not a bug how does the ASA treat this type of configuration when applied to an access list? When I ran a quick packet trace and denied access from that range it looks like the ASA doesn't read that configuration properly.
View 5 Replies
View Related
Oct 22, 2012
I was wondering what could cause this, because every time this message shows up in the log I lose internet connection for about 1 minute then it comes back up. Let me know if I need to get any config info.
View 8 Replies
View Related
Jul 29, 2012
On my network I have a Netgear ReadNAS connected and I'm using an add-in (ReadyNAS Remote) that simplifies the log in to for both internet and LAN-users. However, I get a lot of the following entries in the log when that add-in is being used.
When an internet user log in via ReadyNAS Remote: "Blocked outgoing TCP packet from 192.168.0.xxx:3649 to xx.xxx.xxx.xxx:50125 with unexpected acknowledgement 3320366884 (expected 754541166 to 755655246)"
When a LAN-user log in via ReadyNAS Remote: "Blocked incoming TCP packet from 69.xxx.xxx.xx:80 to xx.xx.xx.xxx:50329 with unexpected sequence 3004123085 (expected 3004136875 to 3004393915)"
how to prevent them from occuring?
View 13 Replies
View Related
Jan 31, 2012
I have an issue with an ASR 1001. The problem occurs with MQC shaping applied to a gigabit interface in the outbound direction. The CIR of the provider we are using is 100Mb/sec, so we are shaping to that value. However when reported traffic levels are about 60Mb/sec, we see a steady increase in output drops. [code]
I have also tried increasing the hold queue, however this does not work with the drops. Increasing the shaping rate to 200Mb/sec gets rid of almost all the drops (not quite all!) but is not what we need. I think that we should see some drops when rates spike above 100mb, however the amount we are seeing seems excessive?
View 1 Replies
View Related
Aug 9, 2012
In last days I'm having problems with a Cisco 1812 device. It works for some time but then crashes and gives the same info.
View 6 Replies
View Related
Apr 16, 2012
I have a number of WLCs/WiSM2 running 7.0.230.0 (still using WCS for management). The management interfaces for the controllers are on a purely private subnet. While going through the intenet edge ASA logs I noticed some traffic drops for the controllers on the Inside interface. I took a packet capture from the controllers and found that they were sending TCP traffic to a number of IP addresses (Microsoft, Hotmail and Google) - always with a src port 2028 (submitserver) with the ACK/FIN flags set. Why this traffic is coming from the management interfaces? The management interface is not used by any wireless clients and is not the default interface for any of the SSIDs.
View 4 Replies
View Related
May 22, 2013
I have a number of WLCs/WiSM2 running 7.0.230.0 (still using WCS for management). The management interfaces for the controllers are on a purely private subnet. While going through the intenet edge ASA logs I noticed some traffic drops for the controllers on the Inside interface. I took a packet capture from the controllers and found that they were sending TCP traffic to a number of IP addresses (Microsoft, Hotmail and Google) - always with a src port 2028 (submitserver) with the ACK/FIN flags set.
View 2 Replies
View Related
Dec 14, 2011
We have a lab network set up with a 7609 router as the central core. Scenario: Laptop with a SIP client. In the lab is a session border controller that will route signaling and media to a SIP gateway with a call agent (172.23.112.201) and a media "handler" (172.23.113.6). The call processing device will forward packets to an RF network (108.x.x.x) where an NCS cable modem sits.Call signaling works perfectly fine. However, RTP traffic from the laptop to the NCS phone is getting routed incorrectly. RTP traffic from the phone to the laptop works fine. [code]
Packet captures show the laptop to phone RTP packets are being routed back towards the corporate router. These time out with ICMP TTL exceeded packets. There are static routes for 172.23.113.0/27 to the optical interfaces that go to the SIP gateway. Interestingly, I can ping an IP on the SIP gateway (not used for media, but is pingable) in that static range (172.23.113.1) just fine from the 7609 (i.e. it's not getting routed to the corporate router). Unfortunately, the IP for the media endpoint on the SIP gateway is not pingable. Config for the 7609 is attached.
View 2 Replies
View Related
Jun 18, 2012
I bought my Dell XPS 1640 in 2009, as wireless connection card I have an intel Wifi link 5100 AGN. This card worked properly till last week all of a sudden i got unexpected DC's and all this requierd me to restart the PC 4-5 times to get 5 minutes of internet.
I know this is a known issue and it occures on random times according to the forum mentioned below url...
My question is is there a new line of cards for my laptop which DON'T have any reports about this?
View 5 Replies
View Related
Mar 2, 2011
One of our ASA5510s lost VPN site-to-site connectivity (ASA v8.2(2); ASDM v6.2(5)53) to one of our other sites last night. The checkbox for Access Interfaces on the Site-to-Site area in Connection Profiles lost its checkbox for the external interface.
View 1 Replies
View Related
Feb 26, 2012
Last night, the C6509-E do a unexpected reload. In the crashinfo, I can see that the last error message before the reload, was as follows: %C6K_ PLATFORM-SP-2-PEER_RESET: SP is being reset by the RP
I consulted the cisco website about this error message and what I found was the following:C6K_PLATFORM-2.
View 1 Replies
View Related
Feb 5, 2012
I have a weird situation with some switches.
Switch .55 can ssh into Switch .57 but cannot ssh into Switch .56.
Switch 56 can ssh into Switch 55 and ssh into Switch 57
Switch 57 can ssh into Switch 55 and ssh into Switch 56
The software on .56 is:
C3560 Software (C3560-IPBASEK9-M), Version 12.2(55)SE3, RELEASE SOFTWARE (fc1)
I noticed on .56, when I do a show ip ssh I get: SSH Enabled - version 1.5. It doesn't say version 1.99 like the others even when I configure version 2. Is this a bug I am running into?
View 9 Replies
View Related
Jun 2, 2013
I have problem with RV120W router, device reboots very often ( up to 3-4 times during working day ), firmware is up to date ( 1.0.4.10 ), last week I decided to use "restore the factory defaults" unfortunately problem still exists.
Router is working in small office, there are 3 PC and 3 VOIP phones ( connected via LAN ) and 1-2 devices connected via wireless ( smartphones )
I've tried to view some logs but unfortunately no luck, can see some errors/warnings in dashboard ( see attached picture ) but cannot see more details ( log configuration wrong ? )
Additionally sometime I can see that CPU utilization is 100%
View 4 Replies
View Related
Dec 7, 2010
One of our Cisco 3750G switches keeps showing this warning:
Description: Gi4/0/43: Unexpected BPDU received. Port has been Disabled.
Recommendation: Check Configuration of the switch, also make sure devices connected to the switch. Enable this port again.
However, there is no thing connecting to the port Gi4/0/43 as shown this link: [URL]. Why do you get this warning?
View 17 Replies
View Related
Apr 17, 2012
i have several cisco 6500 switches, and user switched connected to them.in my example i have a global service vlan, where some access ports are directly connected on the 6500, and this vlan is also allowed on the trunks to the access switch.
now i am connected with ma laptop on a access switch, where my port is in the same vlan. when i do a show mac address-table on my access port, i can see my own mac-address, nothing else.when i start wireshark to see the traffic, all i should see is traffic from or to my MAC, or broadcasts/multicasts.
But i can see other unicast traffic with different source/destination mac than mine.It seem slike these packets get broadcasted over the whole VLAN, but its no broadcast MAC nor IP.
View 4 Replies
View Related
Feb 28, 2013
I'm trying to block access to dropbox.com on our ASA5510. I have it setup and it blocks dropbox.com just fine. But it is also blocking google.com. I can't figure out why.
Here's my config. When it blocks google, it blocks it with the terminated by inspection engine, reason - disconnected, dropped packet.
regex Block_Dropbox ".dropbox.com"
access-list URL_Filtering extended permit tcp any any eq www
access-list URL_Filtering extended permit tcp any any eq https
[Code]......
View 6 Replies
View Related
Feb 6, 2013
So I took a laptop with wireshark and plugged it into a nexus 5000 port that is configured as a trunk with 3 vlans allowed on it. The laptop was seeing all kinds of traffic on the wire, most of it was not involving my laptop.
For example: Server A VLAN 10= 10.10.10.1 Server B VLAN 20= 10.20.20.1 and wireshark laptop is plugged into a trunk port which is allowing those vlan's. The vlan's are routable.
10.10.10.3 is seeing the entire conversation when 10.10.10.1 backs up 10.20.20.1 even though it has no reason to see it. It is as if the trunk is spanning traffic to the laptop port. No span is setup however. It's really weird. This is not just broadcast traffic, but actual tcp taffic between Server A and B. Why would a trunk port see traffic between 2 other servers talking to each other on the vlan.
Trunk port configuration below:
Interface Ethernet 141/1/3
switchport mode trunk
switchport trunk allowed vlan 10, 20
View 5 Replies
View Related
Jan 6, 2012
Just planning my move to 8.4(2) and I'm looking for some input. In the past, I have a text file with name commands for every host on my network that I know about. I would then deploy this list to all ASAs so that I could create ACLs on any firewall using a name, which would correlate to the same IP on any firewall.Now, the names from the name command no longer work as a host entry in ACLs, therefore I'm required to switch all of my active name command entries over to objects.My question is, have any of you found an easy way to change all name commands to objects? Since the name command doesn't specify the mask of the entry, I think this may not be possible without manually updating thousands of records. I know that once I migrate, there will be some objects auto-created, but those will only be host and or networks which have NATs associated with them.
View 7 Replies
View Related
Jun 8, 2011
Is it possible somehow to define externally administred DNS namese in ASA 8.4 in within object groups?i know that we can use name XXX, but some idea popped up using this kind of configuration.
View 3 Replies
View Related
Oct 26, 2011
Environment: Solaris 10(Sparc)
LMS 3.2
RME 4.3.1
CS 3.3.0
CM 5.2
I need to delete a device from CiscoWorks but I cannot find it in the Common Services->Device Management search. I can find it by IP address using the Network->Object Finder . It has an IP address, hostname, display name, and "managed by" information in the search results. Supposedly its managed by:
RME
IPM
DFM(listed twice)
However, when I click on the device link , it has almost no tools available (limited to ping) and no device information. I'm hard pressed on how to delete the item withouth having it in Common Services so that I can select it and then click on "delete" . how I can purge this device?
View 2 Replies
View Related
Dec 18, 2011
We have an ASA5505 that we need to enable hairpinning on.... In the old firmware versions, we used to be able to configure a public to private static mapping along with hairpinning by using
static (inside,outside) outside_ip inside_ip netmask 255.255.255.255
static (inside,inside) outside_ip inside_ip netmask 255.255.255.255
In 8.4, if I use object nat, the hairpin functionality works perfectly,
object network obj-insideip
nat (inside,inside) static publicip
however, since object nat only allows a single nat statement, I was attempting to use a twice nat to enable the hairpin functionality, but have been unsuccessful in coming up with the right combination of parameters for the functionality.
nat (inside,inside) source static private_object public_object destination static public_object private_object
allows hairpinning to successully work from the same machine. Meaning on any given host, I can ping itself using the private or public ip, but I can't get the right combination for hairpinning from any private host to another private host via the public ip. Other combinations have yielded icmp responses, however, they specify the private IP as the source of the reply instead of the public ip.
View 1 Replies
View Related
Aug 19, 2012
There is something wrong with the ordering of our NAT-rules.We are running ASA Version 8.4(2)8 and the nat config is pasted below.
I want outgoing smtp-traffic to be translated to xxx.yyy.zzz.18, but instead it's translated to xxx.yyy.zzz.20 (the outside-interface address).The same goes for ftp-traffic, according to packettracer this is also translated to the xxx.yyy.zzz.20.
Ciscos manual states that static nat rules takes precedence over dynamic nat but that doesn't seem to work for us. [code]
View 7 Replies
View Related
Jul 17, 2011
I'm trying to determine who's throttling our 'Outside' interface because it's being hogged.Is there an easy way to see what data is assigned to what object on our ASA5510
View 2 Replies
View Related
Mar 5, 2012
Any way of doing named objects or object groups for ACLs on the ASRs? (1000 series in this case.) I'm setting up an ASR with a zone-based firewall and writing out all the addresses, ports and protocols for the ACLs associated with the various zones is creating huge, unwieldy ACLs in the config.
View 11 Replies
View Related
Oct 30, 2011
I'm going to replace a Cat6513 with a Nexus 7018. In my Cat6513, there are object tracking config as follows:
ip sla monitor 1
type echo protocol ipIcmpEcho 112.78.254.249
timeout 3000
frequency 6
ip sla monitor schedule 1 life forever start-time now
ip route 172.17.7.0 255.255.255.0 165.202.51.46 name VPN-1 track 123
Is there similar feature in Nexus platform? Because from Nx-OS command ref, I only found:
ip route ip-prefix/mask {[interface] next-hop} [preference] [tag id]
Seems can't associate a track object to a static route in Nx-OS?
View 4 Replies
View Related
Jul 28, 2011
i have 3560 switch located in warehouse environments . i need to monitor the temperate of this switch . i am looking for OID value that serves this purpose .
kindly provide me how to look for all OID that give me real time status for FAN .. CPU UTILIZATION ...TEMPERATURE ...OR ANY MAJOR EVENT THAT CAN DISRUPT MY PRODUCT IN .
View 3 Replies
View Related
