Cisco WAN :: Unexpected Exception To CPU Vector 1500 On 1812
Aug 9, 2012In last days I'm having problems with a Cisco 1812 device. It works for some time but then crashes and gives the same info.
View 6 RepliesIn last days I'm having problems with a Cisco 1812 device. It works for some time but then crashes and gives the same info.
View 6 RepliesOn our public wi-fi network we have an acceptable use policy page that users must accept in order to access the internet. However I would like to exclude a few devices from having to do this. We have a couple of Kindle devices from a vendor that they configured to automatically connect to the internet for updates twice a day. But they cannot accept the policy so they are blocked.
View 3 Replies View RelatedWhen I try to print over the network I'm getting a dicom toolkit exception error. Any idea what this means and how to correct.
View 1 Replies View RelatedIm trying to configure a SR520 with the CCA, but every time I try and apply the changes to the router i get the following error.
"java.lang.nullPointerException"
Using CCA 3.0(1) and Java Version 1.6.0_16 from Sun Microsystems Inc?I assume this is an issue with Java, as like with the SDM you had to use an Old Vertion.
i have a seagate goflex home wireless hardrive and kaspersky PURE, and the only way i can get the hard drive to work is by turning off kasperky's firewall. is there anyway i can add an exception on the firewall so i can have it running and still have my wireless hard drive running at the same time
View 1 Replies View RelatedRegion : Austria
Model : TL-MR3420
Hardware Version : V2
Firmware Version :
ISP :
I'd like to make exception keywords in the Access Control but I don't know how I could possibly do this. E.g. I have put in the keyword "apple" to be blocked, so if a domain has the keyword "apple" in it, it will be automatically blocked. What can I do, however, if I want to make an exception for the domain "appletree.com"? I haven't found any way to make an exception to specific domains or keywords.
Our switch had a little crash-fest this morning at 2:30 AM. I did find a web page about diagnosing Software Forced Crash Exceptions, but it did not look like ours was one of the more easily-identifiable ones.
It may be worth noting that we've only used this switch for about a month, everything seemed fine until now. When we got the switch it did not have any GigE modules, and this week we put 2 into it and have been using them for 2 servers.
It looks like the switch was crashing repeatedly over a period of 20 minutes, and then it stopped and normalized. In the logs of the router that this switch uplinks into, we could see the ethernet port flapping during the time that the switch wasn't reachable.
Here's the Show Stack on the switch:
Sfld_3550# show stackMinimum process stacks:Free/Size Name4404/6000 vegas_flash init3352/6000 SaveCrashBuffer5716/6000 CDP BLOB8512/9000 IP Background5596/6000 vqpc_shim_create_addr_tbl5584/6000 SPAN Subsystem5552/6000 SASL MAIN4944/6000 vegas IPC process8704/9000 cdp init process5404/6000 RADIUS INITCONFIG4928/6000 Vegas CrashBuffer5664/6000 URPF stats2536/3000 Rom Random Update
[code].....
I have a ThinkPad running 2000PRO that I just installed a WPX54G Notebook Adapter. After installing and restarting the computer I get a window saying External exception E06D7363. Also, when I go into configure it says the adapter is inactive. When the computer first starts up the icon for the adapter is green then turns gray.
View 9 Replies View Relatedi want to configure a new cisco 1812.what i want is : we have 5 external ip addresses from our ISP.we want that the FE0 ( wan port ) can route all those ip addresses.so when we put a firewall on port number 8 with 1 of the 5 external ip addresses we have internet.and when we put a firewall with another external ip adres on port 4 we have internet.
View 6 Replies View Relatedis it possible to boot the image from a usb stick on a 1812? if so, what are the requirements?
View 14 Replies View RelatedI was wondering what could cause this, because every time this message shows up in the log I lose internet connection for about 1 minute then it comes back up. Let me know if I need to get any config info.
View 8 Replies View RelatedI have an issue with an ASR 1001. The problem occurs with MQC shaping applied to a gigabit interface in the outbound direction. The CIR of the provider we are using is 100Mb/sec, so we are shaping to that value. However when reported traffic levels are about 60Mb/sec, we see a steady increase in output drops. [code]
I have also tried increasing the hold queue, however this does not work with the drops. Increasing the shaping rate to 200Mb/sec gets rid of almost all the drops (not quite all!) but is not what we need. I think that we should see some drops when rates spike above 100mb, however the amount we are seeing seems excessive?
On one of my computer i'm having multiple issues. when I am on most websites it pops up " TypeError: object unexpected" or just "object unexpected" and I have to refresh the page for them to go away, but if I hit the back button or go to another section of the web page they pop back up. The same computer is now having connection issues and only has "unidentified network no internet access" as the only option, and after everything I have tried it will not budge on the wifi.
View 1 Replies View RelatedI have Cisco 1812 connected to ISP's router Cisco 870. Both routers have switch module and when I'm connected with PC to 870 I can connect via VPN to remote location.When I'm connected to 1812 remote VPN doesn't work.Client computers are connected to 1812 and they can surf on internet just fine.
View 4 Replies View RelatedI need to change the source IP of a packet for one of my NAT's.I currently have an Cisco 1812.I have an PPPoE connection as Dialer 0.I have another VLAN that is connected to an Netscreen SSG5 VPN gateway via another Cisco switch.I have a vlan trunk between the switch and the 1812. What I would like to achive is the following :-For any traffic going to the following three ranges make it apear as if it was coming from the VLAN50 address [code]I can ping my netscreen on 10.27.30.255 fine from the Cisco 1812. But any other PC fails, as for some reasion the traffic has a source of my Dialer 0 interface.How can I write a nat to change the source just for the tree destitnations ?
View 7 Replies View RelatedI have a Cisco 1812 with IOS 12.4(15)T17.I would like to perform pppoe dialing using this device to my ISP. My ISP is using VLAN id 500 for Internet. I configure like below but seem unsuccessful. From the console, I can't even ping to internet.ip nat inside source route-map nonat interface Dialer1 overload.
View 5 Replies View RelatedI am trying to get this VPN Client (5.0.07.0410) to connect to the remote LAN behind the cisco 1812. Here is my config. I am able to get everything connected and IP assigned to the client and can even ping local LAN and Internet but can't ping to the remote LAN behind the 1812. I feel it's a routing issue or an ACL issue.SHUMAMKERRTR>enPassword:SHUMAMKERRTR#sh runBuilding configuration...
Current configuration : 2910 bytes!version 12.4service timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname SHUMAMKERRTR!boot-start-markerboot-end-marker!enable secret 5 password!aaa new-model!!aaa authentication login userauthen localaaa authorization network groupauthor local!aaa session-id commonno network-clock-participate slot 1no network-clock-participate wic 0ip cef!!no ip dhcp use vrf connectedip dhcp excluded-address 192.168.7.1 192.168.7.10!ip dhcp pool SHUMAKER network 192.168.7.0 255.255.255.0 dns-server 192.168.7.1 default-router 192.168.7.1!!ip domain name shumaker.nothingip auth-proxy max-nodata-conns 3ip admission max-nodata-conns 3!!!!!!!!!!!!!!!username cisco privilege 15 secret 5 password!!ip ssh rsa keypair-name SHUMAMKERRTR.shumaker.nothingip ssh version 2!!crypto isakmp policy 1 encr 3des authentication pre-share group 2!crypto
[code].....
I have a number of WLCs/WiSM2 running 7.0.230.0 (still using WCS for management). The management interfaces for the controllers are on a purely private subnet. While going through the intenet edge ASA logs I noticed some traffic drops for the controllers on the Inside interface. I took a packet capture from the controllers and found that they were sending TCP traffic to a number of IP addresses (Microsoft, Hotmail and Google) - always with a src port 2028 (submitserver) with the ACK/FIN flags set. Why this traffic is coming from the management interfaces? The management interface is not used by any wireless clients and is not the default interface for any of the SSIDs.
View 4 Replies View RelatedI have a number of WLCs/WiSM2 running 7.0.230.0 (still using WCS for management). The management interfaces for the controllers are on a purely private subnet. While going through the intenet edge ASA logs I noticed some traffic drops for the controllers on the Inside interface. I took a packet capture from the controllers and found that they were sending TCP traffic to a number of IP addresses (Microsoft, Hotmail and Google) - always with a src port 2028 (submitserver) with the ACK/FIN flags set.
View 2 Replies View RelatedWe have a lab network set up with a 7609 router as the central core. Scenario: Laptop with a SIP client. In the lab is a session border controller that will route signaling and media to a SIP gateway with a call agent (172.23.112.201) and a media "handler" (172.23.113.6). The call processing device will forward packets to an RF network (108.x.x.x) where an NCS cable modem sits.Call signaling works perfectly fine. However, RTP traffic from the laptop to the NCS phone is getting routed incorrectly. RTP traffic from the phone to the laptop works fine. [code]
Packet captures show the laptop to phone RTP packets are being routed back towards the corporate router. These time out with ICMP TTL exceeded packets. There are static routes for 172.23.113.0/27 to the optical interfaces that go to the SIP gateway. Interestingly, I can ping an IP on the SIP gateway (not used for media, but is pingable) in that static range (172.23.113.1) just fine from the 7609 (i.e. it's not getting routed to the corporate router). Unfortunately, the IP for the media endpoint on the SIP gateway is not pingable. Config for the 7609 is attached.
I use a CISCO ASA 5505 with ASA 8.3. Everything works fine, but when I type the following line I get an error message:
nat (inside,outside) source dynamic OBJ_SPECIFIC_192-168-1-0 10.1.5.5ERROR: 10.1.5.5 doesn't match an existing object or object-groupI even tried to create the missing object but it did not work. The document also explains how to use ASDM for this configuration. It seems that there an object 10.1.5.5. is created.
This is the output of "show running-config":
ASA Version 8.3(1) !hostname ciscoasaenable password 8Ry2YjIyt7RRXU24 encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 !interface Vlan2 nameif outside security-level 0 ip address 10.1.5.1 255.255.255.0 !interface Ethernet0/0 switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2! interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!ftp mode passiveobject network obj_any subnet 0.0.0.0 0.0.0.0object network
[code]....
One of our ASA5510s lost VPN site-to-site connectivity (ASA v8.2(2); ASDM v6.2(5)53) to one of our other sites last night. The checkbox for Access Interfaces on the Site-to-Site area in Connection Profiles lost its checkbox for the external interface.
View 1 Replies View RelatedLast night, the C6509-E do a unexpected reload. In the crashinfo, I can see that the last error message before the reload, was as follows: %C6K_ PLATFORM-SP-2-PEER_RESET: SP is being reset by the RP
I consulted the cisco website about this error message and what I found was the following:C6K_PLATFORM-2.
I have a weird situation with some switches.
Switch .55 can ssh into Switch .57 but cannot ssh into Switch .56.
Switch 56 can ssh into Switch 55 and ssh into Switch 57
Switch 57 can ssh into Switch 55 and ssh into Switch 56
The software on .56 is:
C3560 Software (C3560-IPBASEK9-M), Version 12.2(55)SE3, RELEASE SOFTWARE (fc1)
I noticed on .56, when I do a show ip ssh I get: SSH Enabled - version 1.5. It doesn't say version 1.99 like the others even when I configure version 2. Is this a bug I am running into?
I have problem with RV120W router, device reboots very often ( up to 3-4 times during working day ), firmware is up to date ( 1.0.4.10 ), last week I decided to use "restore the factory defaults" unfortunately problem still exists.
Router is working in small office, there are 3 PC and 3 VOIP phones ( connected via LAN ) and 1-2 devices connected via wireless ( smartphones )
I've tried to view some logs but unfortunately no luck, can see some errors/warnings in dashboard ( see attached picture ) but cannot see more details ( log configuration wrong ? )
Additionally sometime I can see that CPU utilization is 100%
erro came with 3722------however after checking date and time i was able to login. AZAD
View 1 Replies View RelatedOn my network I have a Netgear ReadNAS connected and I'm using an add-in (ReadyNAS Remote) that simplifies the log in to for both internet and LAN-users. However, I get a lot of the following entries in the log when that add-in is being used.
When an internet user log in via ReadyNAS Remote: "Blocked outgoing TCP packet from 192.168.0.xxx:3649 to xx.xxx.xxx.xxx:50125 with unexpected acknowledgement 3320366884 (expected 754541166 to 755655246)"
When a LAN-user log in via ReadyNAS Remote: "Blocked incoming TCP packet from 69.xxx.xxx.xx:80 to xx.xx.xx.xxx:50329 with unexpected sequence 3004123085 (expected 3004136875 to 3004393915)"
how to prevent them from occuring?
At the moment I am trying to connect to a DHCP ISP, but the connection only last for 10-15mins and then it will automatically disconnected. Every time I reset the WAN port , service back to normal for another 10-15 mins ><
[code]...
we are trying to configure PPPOA over Ethernet on Cisco 1812 Router, we have 2 ethernet ports and no ATM ports, hence PPPOA must be applied at a global setting.
View 3 Replies View RelatedI have 5 cisco 1812 routers that i set up in a hub-spoke dmvpn configuration between 5 sites. All routers have a secondary internet connection . Could i set up a second tunnel interface on each router to create a backup dmvpn that will use this secondary internet connection? i use EIGRP for routing.
View 2 Replies View RelatedI am using Cisco 1812 as EZVPN server. I want to use Active directory for VPN user authentication. I am trying from couple of days but no success.With ASA, i am able to authenticate against AD, but not with IOS router. Below are my configurationsIf kerberos authentication is not possible, I would like to know the possibility of using AD as ACS external database. I am running both AD and ACS in the same server. If i can integrate AD with ACS, i can use TACACS or RADIUS for the authentication.
View 3 Replies View Relatedim searching a list wich can show me all the cisco routers and witches that support USB. (axample : a 1812 router)
View 1 Replies View RelatedI am using DHCP ISP , but the connection only last for 20 mins exactly and then it will automatically disconnected. Every time I reset the WAN port ,
service back to normal for another 20 mins ><
The are no log or any error message when connection timeout. the status of the WAN port is normal "Up Up".
I have tried this config on another ISP and everything work just fine !
Fiber converter -------> Cisco 1812 (FastEthernet1) --------->LAN
Router#sh runBuilding configuration...
Current configuration : 3205 bytes!
version 12.4service tcp-keepalives-inservice tcp-keepalives-outservice timestamps
[Code].....