Unable To Connect Internet Via Cisco Router
Jan 26, 2012I recently purchase dan internet radio and have not been able to connect it via my cisco router
View 4 RepliesI recently purchase dan internet radio and have not been able to connect it via my cisco router
View 4 RepliesMy modem seems to be bad (my thoughts) the twc says it is working perfectly however i do not think so. about 2 weeks ago it stopped working with our router. i have since tried 2 other different routers on it linksys g (the original) linksys b and, Netgear g (brand new never been out of the box) none of these routers would connect to the internet however if i hook directly to the modem internet works fine. Is there a way to tell if this is a problem with the router or the modem.
View 14 Replies View RelatedUsing Windows 7 and router wont connect to the net..it asks for a key password and when I do that it doesnt connect..I have a good channel ..I had a windows XP on this before and no problem..bought a new computer with windows 7 and cant seem to get the router to connect and pick up the signal
View 1 Replies View RelatedI've been unable to connect to the internet or even my Linksys router (192.168.1.1) from my main desktop. However, I can access the internet and the router by way of another (older) desktop and two laptops.This problem occurred after powering down and unplugging both desktops before a thunder storm. Later that night I powered on and had this issue. ISP didn't have any outages in the area. [code] Network and Sharing Center displays (this computer) with a line connecting to Unidentified Network and the red x between Internet. When viewing the status of that local network connection packets are being sent but 0 are received. TCP/IPv4 and 6 Properties are set to obtain IP/DNS automatically.I don't have any additional firewall software but windows firewall is enabled.
View 10 Replies View Relatedset up of the router? There's so many options, manual internet set up, automatic internet set up, networking setup.The Quick CD installation got stuck trying to find the router. Do i need to connect the ethernet wire to my modem then connect my computer to it wirelessly? Do I need to connect the ehernet wire to my modem and connect my computer to it via another ethernet port in the router? Do I even need to connect my ethernet wire to my modem in the first place?
View 12 Replies View RelatedI am currently having problems connecting to my apartment internet through my Linksys E900 router. This problem occurred at random as well, I went to bed one night and I was connected with zero problems and when I woke up it no longer worked. It has been like this for a week now and I feel like I've tried everything, including buying a new Netgear router which didnt work either.Some basic info:
- Router is a Linksys E900
- My apartment complex provides free internet through Pavlov Media
- I can connect to the unsecured Pavlov wireless with no problem
- Before it stopped working, I had simply set up the router by plugging it into a wall ethernet jack and running the setup disc. This no longer works, it will set up the network but then I receive an error stating it is unable to connect to the internet.
I reset my Hybrid modem router's settings back to factory settings cause the disconnects were pissing me off.After a while, It disconnected. I tried reconnecting, but now it's only showing "No Internet access."
View 8 Replies View RelatedMy router suddenly seems unable to connect to the internet through my modem. I've been troubleshooting it for a couple days now and nothing seems work.My router and modem both work perfect, individually.Connecting a cable from my modem to my PC lets me get online.Connecting a cable from my modem to my router doesn't work, link light remains off. [code]
View 1 Replies View RelatedSo I recently just built a new pc for gaming, I can't seem to connect to the internet through my router or directly through my modem. I have connected directly on my laptop and it works and through router and it works.
View 1 Replies View RelatedI have a VirginMedia 50Mps wireless router that runs 4 wired connections. These are all working fine and have Internet connection. When the router was installed I could also connect to the internet wirelessly on my Laptop which is running Windows Vista Home Premium. But of late I have been unable to connect to the Internet on the Laptop. When you place the mouse pointer over the Icon in the bottom right hand corner, the following message comes up : Currenlty connected to:Unidentified(virginmediaxxxxxxxx) (where xxxxxxxx is a numeric identifier for the modem). Access: Limited connectivity or sometimes it says Access : Local only.
View 4 Replies View RelatedI am unable to connect to the internet through my wireless router. However, I can connect using neighbor's wireless connection and other laptops in my home are able to connect to the internet using MY wireless connection. The problem started suddenly, I used to be able to connect, then I had the problem so I rebooted and that resolved the issue temporarily. I tried disabling the wireless adapter card then rebooting, this did not work. I also unchecked the TCP/IPv6.
View 4 Replies View RelatedDesktop won't connect to internet. I have a Belkin router and my laptops connect to the internet. My Netflix Rokus connects to the internet.I have tried your suggestion with reset winsock and reset IPv4 TCP/IP stack to installation defaults,etc. [code]
View 10 Replies View RelatedDue to some reason I had to reset my linksys router WRT54G and now I am not able to connect to internet using my router. I tried coupld of settings followings some suggestion over internet sites but doesn't work for me. Still I get no network access message.
View 1 Replies View RelatedI just upgraded my router from an old wireless54G to an E1200.The wireless device I have on my Sony Viao PCG GRT-240G laptop is LAN-Express AS IEEE 802.11g miniPCI Adapter
-Initially I couldn't connect at all with this machine (however the other two newer laptops could) so I contacted the Linksys tech and he advised I should upgrade my laptop driver
-After much research about this I found a common fix was to upgraded drivers from the 2004 sony driver to atheros_wifi_9.2.0.480 drivers.
-After I did the upgrade I can connect to the router on the guest account and use the internet
However, on the Main account I can connect to the router but I have no internet connectionGoogle chrome gives error belowThe server at [url]... can't be found, because the DNS lookup failed. DNS is the network service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing Google Chrome from accessing the network.How can I use one part of the network but not the other part? Shouldn't both the guest & main accounts use DNS lookup?
I have a few devices I cannot connect to my router or modem but my ps3 and 2 xboxes are connected. I have easy link and I try to add devices to it but it doesn't show me the same options it did before when I added my ps3, and ipod. Now I can't connect my psp or any phone to it, I have the WRT54GS v7.2, those are my only problems with the router nothing.
View 3 Replies View RelatedI have had this router with no real problems for the past 2 years. As of now I can't connect to the internet through the router wired or wirelessly. I have tried all the hard resets and other tricks. I can go straight from my internet connection to my computer and it works fine. Once I go through the router using a lan cord all I get is limited or no connectivity. I have tried to access the router set up using the 192.68. etc but can't just states invalid address. Anything else to try or is this thing bricked ?
View 1 Replies View RelatedOk group here's the issue. I have a E2500 router with a wired connection for my sons xbox and 2 laptops connected to it. The laptop I used to set-up the system will usually connect to the router but not allow me through to the internet then after a shutdown and repowering it connects. what to check? The othhitch. Both arer laptop connects without a e running vista home.
View 2 Replies View RelatedI am using the following model and version:
Model No.: WRT54G, Ver. 7.0
I am not able to connect to the internet through Linksys Wireless Router. I have tried pinging the default gateway of the ISP provided router IP from the router utility, "Diagnostic", but I am not able to ping it.
For some reason my wireless router recognized my pc, or my modem, Neither is it able to connect to the internet. All the lights are on but not flashing/blinking like they used to. I tried to run the setup over and it couldn't find the router even though everything was plugged correctly. I tried reseting the router but that doesn't even affect it. All the lights remain on with on blinking or flashing no mater what I do. Is there anyway for my router to work normal again or do I need to get a ned wireless router?
View 15 Replies View RelatedMy BEFSR81 router has never been a problem for over 10 years.All of a sudden I can not connect to the internet..I only use the router for connecting 2 PCs to the internet modem. I have not changed any configuration. tried my IPS COX recommendation to disconnect the power for about 1 minute then try again with no luck. CoX said they tried pinging my router but could not get a reading. While waiting for them to come up with a solution, I hooked one of my PCs directly to the modem. It worked. So I tried it with the other PC. But it didn't work right away. It kept trying to dial up for a connection. I finally got the WIZARD to get it configured correctly. I assume it must be a router problem because either one of my PCs can get an internet connection when hooked to the modem. I did not pusue any further with COX, THEIR AUTOMATED TROUBLE SHOOTER WAS GETTING ON MY NERVES.Should I take the time to resolve the issue with the router or buy a new or refurbished router? If the task isn't too complicatged, I am willing to try and fix it.
View 1 Replies View RelatedUnable to connect to the internet thru router.
Hardware:
Motorola Modem
Netgear N-300 WNR2000v3 router
Dell Vostro 470
I am not able to connect my HP laptop (Windows Vista) to the internet via a wireless router/high speed internet.My internet service provider confirmed that it is a problem with my HP laptop.I have a Linksys router. My other laptop (Sony) connects fine.I have tried two browsers on my HP laptop to access the internet with no luck.My HP laptop does say that I am connected to the wireless network.
View 9 Replies View RelatedI have a new Linksys E2000, I was unable to connect one of my laptops to the internet, so I decided to call support with the problem, after 45min and not results, find out that the E2000 do not support the Atheros AR 5007, they told me that I need to get a new driver for my adapter. Fine but Cisco doesn’t have a Driver update for this problem or how to fix it, or at least send you a link where to get the fix.
View 4 Replies View RelatedI have had a problem with my WRT400N wireless Linksys router. Whenever my router restarts or if the DHCP lease expires, I'm unable to connect to internet. During this time I can access the router, but not the internet. Oddly something that seems to "fix" this is if I use my nintendo wii to access my wireless internet at that time, all computers on my network are able to access the internet. However this is annoying to do since this happens once a day from DHCP lease expiring. Using any other computer to attempt to access the internet at this time would be unable to get a connection until I do the "fix" with the Wii. WRT400N
View 8 Replies View RelatedThe internet at my parents house has recently gone on the fritz..the wireless router is a N600 Wireless Dual Band Router WNDR3400..The computers of the house are able to connect to it..But it does not allow internet connections..The 3 computers are an HP Laptop running windows 7.a Dell Dimension E521 Running windows 7 & and an older HP Walmart special running XP.They can connect to outside systems and through a wired connection to the Modem from Cable vision. They replaced the wireless router and the problem continues.Internet is capable by plugging directly into the Cable vision router,unfortunately do not have the cables to try through the Netgear router to test that out..
View 3 Replies View RelatedFew days ago I started to get the following error message while trying to connect to the internet using Chrome and IE:"Unable to connect to the proxy server..."I don't have a proxy server configured - nothing is checked in the LAN settings page.In Firefox I don't have that problem - it seems it gets the proxy configuration from elsewhere.
View 3 Replies View RelatedIn my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
My company is using catalyst 3650G which we configured to route between vlans.ports 1-12 on the switch are configured to be in vlan 50 which serves as our servers vlan,port 13-20 are configured to be in vlan 100 in which the CE500 switch connected to (end users are connected here). we have two CE500 swithces and they linked each other via the gigabit uplink port.port 24 is configured as a routed port and connects to a 2811 router.We want to change the Internet connection from Leased Line to Broad Band.Currently we are using the(Leased Line) primary network.Whenever we are try to change the (Broad Band)secondary network,It's not happening the internet[CODE]
View 7 Replies View RelatedI come here today with a problem that has been plaguing this laptop forever and a day. You see, about two or so years ago on this very laptop, it was just another day where I booted up my laptop and was going to get a good day of wasting time on the internet underway. I tried to open Firefox, and I got prompted to download an apparent update for the browser. Obviously I went along with it because it seemed pretty routine and identical to how Firefox had updated in the past.
After the update was all done and dusted, I found myself unable to connect to the internet through Firefox. I would just get a constant stream of "Unable to connect" messages. I thought it might have been a problem on my end since back then I had rather wishy washy internet. So I let it settle for a while. Later on that day I talked to a few of my buddies over Xbox Live and asked if they'd had any similar issues with the new Firefox update because at the time, we all used it and hadn't quite jumped ship to Chrome just yet. But no matter who I asked, I always got the same response "I didn't get any update." Which as you can imagine, confused me quite thoroughly.
Simply what happens when I attempt to connect to the wireless network (Home network). I'll click 'Connect', it will start attempting to connect, it will keep attempting to connect for a good few minutes and then just stop, no error message, no 'unable to connect', it will just stop and I'll be back to square one, the home wireless connection will still be there but not connected.
The connection displays as full signal all the time, but will not connect. In the house we have also got 3 other laptops running from the same connection from time to time, these all connect fine without any hassle.
However I cannot connect to the internet, the following message appears. The system cannot up date the telephone book file error 624. I am not connected to a telephone line for my system, as I use a modem USB, which is working ok.
View 1 Replies View RelatedI'm having problems connecting to certain sites on the internet through one computer. I can connect ok on other computers going through the same home network. On the one computer that is having problems I can connect to the site but then when I click on a link I get unable to connect then I can reload the page and some times it connects to the page. So as I am browsing through the site almost every time I click on a link I get unable to connect and have to keep reloading the page.
View 5 Replies View Relateddiagnosis is indicating server is connected but internet is not connected
View 1 Replies View Related